Solved Exercises on Limits at Infinity in Differential Calculus

Master limits at infinity: horizontal asymptotes, end behavior, and infinite limits through these 5 detailed exercises.

Limits at Infinity Fundamentals
\(\lim_{x \to \pm\infty} f(x) = L\)
Limit at Infinity Definition
Key Definitions:

Limit at Infinity: limx→∞ f(x) = L means f(x) approaches L as x becomes arbitrarily large

Limit at Negative Infinity: limx→-∞ f(x) = L means f(x) approaches L as x becomes arbitrarily large negative

Horizontal Asymptote: Line y = L is a horizontal asymptote if limx→±∞ f(x) = L

Infinite Limit: limx→a f(x) = ±∞ means function grows without bound

Limits at Infinity Techniques:
  1. Polynomial comparison: For limx→∞ P(x)/Q(x), compare degrees of numerator and denominator
  2. Divide by highest power: Divide numerator and denominator by highest power of x
  3. Algebraic manipulation: Rationalize, factor, or simplify expressions
  4. Special limits: Use known limits like limx→∞ (1/x) = 0
  5. Composition rules: Apply limit laws for composite functions
Tip 1: For rational functions, if degree of numerator < degree of denominator, limit is 0
Tip 2: If degrees are equal, limit is ratio of leading coefficients
Tip 3: If numerator degree > denominator degree, limit is ±∞ (sign depends on leading terms)
Tip 4: Always check both directions: x → ∞ and x → -∞
Key Properties: Horizontal asymptotes, end behavior, dominance of highest-degree terms
Applications: Asymptotic analysis, function behavior, optimization problems
Essential Rules:

• limx→∞ (1/xn) = 0 for n > 0

• limx→∞ (axm)/(bxn) = 0 if m < n, = a/b if m = n, = ±∞ if m > n

• limx→∞ (P(x))/(Q(x)) follows the highest-degree term behavior

• Horizontal asymptote y = L exists when limx→±∞ f(x) = L

Solution: Exercises 1 to 3
1 Rational Function
Exercise 1
Find:
limx→∞ (3x² + 2x - 1)/(x² + 4x + 7)
Definition:

Rational Function: Ratio of two polynomials where degrees are equal

Analysis:
  1. Compare degrees of numerator and denominator
  2. Divide both numerator and denominator by highest power of x
  3. Apply limit properties to simplified expression
Step 1: Identify the highest power

Both numerator and denominator have degree 2

Numerator: 3x² + 2x - 1 (degree 2)

Denominator: x² + 4x + 7 (degree 2)

Step 2: Divide by highest power (x²)

(3x² + 2x - 1)/(x² + 4x + 7) = [(3x² + 2x - 1)/x²]/[(x² + 4x + 7)/x²]

= [3 + 2/x - 1/x²]/[1 + 4/x + 7/x²]

Step 3: Apply the limit

limx→∞ [3 + 2/x - 1/x²]/[1 + 4/x + 7/x²]

= [limx→∞ (3) + limx→∞ (2/x) - limx→∞ (1/x²)]/[limx→∞ (1) + limx→∞ (4/x) + limx→∞ (7/x²)]

Step 4: Evaluate individual limits

limx→∞ (3) = 3

limx→∞ (2/x) = 0

limx→∞ (1/x²) = 0

limx→∞ (1) = 1

limx→∞ (4/x) = 0

limx→∞ (7/x²) = 0

Step 5: Calculate the final result

= [3 + 0 - 0]/[1 + 0 + 0] = 3/1 = 3

limx→∞ (3x² + 2x - 1)/(x² + 4x + 7) = 3
Final answer:

The limit equals 3, which is the ratio of leading coefficients

Applied rules:

• Rational function rule: When degrees equal, limit is ratio of leading coefficients

• Limit division: lim(f/g) = lim(f)/lim(g) when lim(g) ≠ 0

• Power rule: limx→∞ (1/xn) = 0 for n > 0

2 Denominator Dominates
Exercise 2
Find:
limx→∞ (2x + 1)/(x³ - 5x² + 3)
Definition:

Denominator Dominates: When denominator has higher degree than numerator

Step 1: Compare degrees

Numerator: 2x + 1 (degree 1)

Denominator: x³ - 5x² + 3 (degree 3)

Since 1 < 3, the denominator dominates

Step 2: Divide by highest power (x³)

(2x + 1)/(x³ - 5x² + 3) = [(2x + 1)/x³]/[(x³ - 5x² + 3)/x³]

= [2/x² + 1/x³]/[1 - 5/x + 3/x³]

Step 3: Apply the limit

limx→∞ [2/x² + 1/x³]/[1 - 5/x + 3/x³]

= [limx→∞ (2/x²) + limx→∞ (1/x³)]/[limx→∞ (1) - limx→∞ (5/x) + limx→∞ (3/x³)]

Step 4: Evaluate individual limits

limx→∞ (2/x²) = 0

limx→∞ (1/x³) = 0

limx→∞ (1) = 1

limx→∞ (5/x) = 0

limx→∞ (3/x³) = 0

Step 5: Calculate the final result

= [0 + 0]/[1 - 0 + 0] = 0/1 = 0

Step 6: Verify with general rule

When degree of numerator < degree of denominator, limit is 0

This confirms our result

limx→∞ (2x + 1)/(x³ - 5x² + 3) = 0
Final answer:

The limit equals 0 since denominator dominates numerator

Applied rules:

• Dominance rule: If deg(num) < deg(denom), limit is 0

• Division by highest power: Technique to reveal dominant terms

• Limit properties: Apply to numerator and denominator separately

3 Negative Infinity
Exercise 3
Find:
limx→-∞ (4x³ - 2x² + 1)/(2x³ + 5x - 3)
Definition:

Limit at Negative Infinity: Behavior as x approaches negative infinity

Step 1: Compare degrees

Numerator: 4x³ - 2x² + 1 (degree 3)

Denominator: 2x³ + 5x - 3 (degree 3)

Both have the same degree, so limit is ratio of leading coefficients

Step 2: Divide by highest power (x³)

(4x³ - 2x² + 1)/(2x³ + 5x - 3) = [(4x³ - 2x² + 1)/x³]/[(2x³ + 5x - 3)/x³]

= [4 - 2/x + 1/x³]/[2 + 5/x² - 3/x³]

Step 3: Apply the limit as x → -∞

limx→-∞ [4 - 2/x + 1/x³]/[2 + 5/x² - 3/x³]

= [limx→-∞ (4) - limx→-∞ (2/x) + limx→-∞ (1/x³)]/[limx→-∞ (2) + limx→-∞ (5/x²) - limx→-∞ (3/x³)]

Step 4: Evaluate individual limits

limx→-∞ (4) = 4

limx→-∞ (2/x) = 0 (since x → -∞, 2/x → 0)

limx→-∞ (1/x³) = 0 (since x → -∞, 1/x³ → 0)

limx→-∞ (2) = 2

limx→-∞ (5/x²) = 0 (since x² → +∞, 5/x² → 0)

limx→-∞ (3/x³) = 0 (since x³ → -∞, 3/x³ → 0)

Step 5: Calculate the final result

= [4 - 0 + 0]/[2 + 0 - 0] = 4/2 = 2

Step 6: Generalize the result

For rational functions with equal degrees, the limit at both ∞ and -∞ equals the ratio of leading coefficients

limx→-∞ (4x³ - 2x² + 1)/(2x³ + 5x - 3) = 2
Final answer:

The limit equals 2, same as x → ∞ since degrees are equal

Applied rules:

• Equal degrees: Limit is ratio of leading coefficients for both ∞ and -∞

• Negative infinity: Same technique as positive infinity

• Power behavior: Even powers approach +∞, odd powers approach ±∞ depending on sign

Solution: Exercises 4 to 5
4 Numerator Dominates
Exercise 4
Find:
limx→∞ (x⁴ - 3x² + 2)/(2x² + 5)
Definition:

Numerator Dominates: When numerator has higher degree than denominator

Step 1: Compare degrees

Numerator: x⁴ - 3x² + 2 (degree 4)

Denominator: 2x² + 5 (degree 2)

Since 4 > 2, the numerator dominates

Step 2: Divide by highest power (x²)

(x⁴ - 3x² + 2)/(2x² + 5) = [(x⁴ - 3x² + 2)/x²]/[(2x² + 5)/x²]

= [x² - 3 + 2/x²]/[2 + 5/x²]

Step 3: Apply the limit

limx→∞ [x² - 3 + 2/x²]/[2 + 5/x²]

= [limx→∞ (x²) - limx→∞ (3) + limx→∞ (2/x²)]/[limx→∞ (2) + limx→∞ (5/x²)]

Step 4: Evaluate individual limits

limx→∞ (x²) = ∞

limx→∞ (3) = 3

limx→∞ (2/x²) = 0

limx→∞ (2) = 2

limx→∞ (5/x²) = 0

Step 5: Calculate the final result

= [∞ - 3 + 0]/[2 + 0] = ∞/2 = ∞

Step 6: Determine the sign

As x → ∞, x⁴ is positive and 2x² is positive

Both numerator and denominator are positive for large x

So the limit is +∞

limx→∞ (x⁴ - 3x² + 2)/(2x² + 5) = +∞
Final answer:

The limit is +∞ since numerator dominates denominator

Applied rules:

• Numerator dominance: If deg(num) > deg(denom), limit is ±∞

• Sign determination: Consider signs of leading coefficients

• Infinite limits: Describe the unbounded growth behavior

5 Radical Function
Exercise 5
Find:
limx→∞ (√(x² + 4x + 3) - x)
Definition:

Radical Function Limit: Requires rationalization or conjugate multiplication

Step 1: Identify the indeterminate form

As x → ∞, √(x² + 4x + 3) → ∞ and x → ∞

This gives ∞ - ∞, which is indeterminate

Step 2: Rationalize using conjugate

Multiply by conjugate: (√(x² + 4x + 3) - x) × (√(x² + 4x + 3) + x)/(√(x² + 4x + 3) + x)

= [(√(x² + 4x + 3))² - x²]/(√(x² + 4x + 3) + x)

= [x² + 4x + 3 - x²]/(√(x² + 4x + 3) + x)

= (4x + 3)/(√(x² + 4x + 3) + x)

Step 3: Simplify the expression

Factor out x from numerator and denominator:

= x(4 + 3/x)/(√x²(1 + 4/x + 3/x²) + x)

Since x → ∞, x > 0, so √x² = |x| = x

= x(4 + 3/x)/(x√(1 + 4/x + 3/x²) + x)

= x(4 + 3/x)/[x(√(1 + 4/x + 3/x²) + 1)]

Step 4: Cancel common factor

= (4 + 3/x)/(√(1 + 4/x + 3/x²) + 1)

Step 5: Apply the limit

limx→∞ (4 + 3/x)/(√(1 + 4/x + 3/x²) + 1)

= [limx→∞ (4) + limx→∞ (3/x)]/[limx→∞ √(1 + 4/x + 3/x²) + limx→∞ (1)]

Step 6: Evaluate individual limits

limx→∞ (4) = 4

limx→∞ (3/x) = 0

limx→∞ (4/x) = 0

limx→∞ (3/x²) = 0

limx→∞ √(1 + 4/x + 3/x²) = √(1 + 0 + 0) = 1

limx→∞ (1) = 1

Step 7: Calculate the final result

= (4 + 0)/(1 + 1) = 4/2 = 2

limx→∞ (√(x² + 4x + 3) - x) = 2
Final answer:

The limit equals 2 after rationalizing the radical expression

Applied rules:

• Conjugate multiplication: Technique for ∞ - ∞ forms with radicals

• Rationalization: Eliminate radicals from numerator or denominator

• Leading term analysis: Focus on dominant terms for large x

Questions & Answers

Question: Why do we divide by the highest power when finding limits at infinity? What's the intuition behind this?

Answer: Dividing by the highest power is a strategic move to reveal which terms dominate as x becomes very large:

  • Domination principle: As x → ∞, higher-degree terms become infinitely larger than lower-degree terms
  • Ratio preservation: Dividing numerator and denominator by the same quantity doesn't change the fraction's value
  • Term simplification: Terms like 1/x, 1/x², etc. approach 0, making them negligible
  • Leading coefficient focus: Only the coefficients of highest-degree terms matter in the limit

In Exercise 1, dividing by x² made the lower-degree terms (2/x, 1/x², 4/x, 7/x²) vanish, leaving only the leading coefficients 3/1 = 3.

Question: In Exercise 5, why didn't we get ∞ - ∞ = 0? That seems like it should work.

Answer: ∞ - ∞ is an indeterminate form, not equal to 0! Here's why:

  • Indeterminate nature: ∞ - ∞ could be anything: 0, ∞, -∞, or any finite number
  • Different rates: The two infinities might be growing at different rates
  • Example: limx→∞ (x² - x) = ∞, not 0, even though both x² → ∞ and x → ∞
  • Need analysis: We must analyze the exact relationship between the terms

In Exercise 5, √(x² + 4x + 3) grows only slightly faster than x, so their difference approaches 2, not ∞. This is why we needed the rationalization technique!

Question: How do I quickly determine the limit of a rational function at infinity without doing all the algebra?

Answer: Use this quick decision tree for rational functions P(x)/Q(x):

  1. Deg(P) < Deg(Q): Limit = 0 (denominator dominates)
  2. Deg(P) = Deg(Q): Limit = (leading coeff of P)/(leading coeff of Q)
  3. Deg(P) > Deg(Q): Limit = ±∞, sign determined by leading terms

Examples:

  • (3x + 1)/(x² + 2) → 0 (numerator degree 1 < denominator degree 2)
  • (2x² + x)/(3x² + 5) → 2/3 (equal degrees, ratio of leading coeffs)
  • (x³ + 2)/(x² + 1) → +∞ (numerator degree 3 > denominator degree 2, positive leading terms)

This shortcut saves time while maintaining accuracy!