Solved Exercises on Limits by Direct Substitution in Differential Calculus

Master direct substitution: polynomial, rational, and radical functions through these 5 detailed exercises.

Direct Substitution Fundamentals
\(\lim_{x \to a} f(x) = f(a)\)
Direct Substitution Rule
Key Definitions:

Direct Substitution: If f(x) is continuous at x = a, then limx→a f(x) = f(a)

Continuity: A function is continuous at a point if the limit exists and equals the function value

Polynomial Functions: Continuous everywhere, so direct substitution always works

Rational Functions: Continuous wherever the denominator is non-zero

Direct Substitution Process:
  1. Check continuity: Verify that f(x) is continuous at the point of interest
  2. Substitute: Replace x with the value being approached
  3. Calculate: Evaluate the expression
  4. Verify: Ensure the result makes sense
Tip 1: Direct substitution works for polynomials, rational functions (where defined), and radicals (where defined)
Tip 2: Always check that the function is defined at the point before substituting
Tip 3: If substitution yields 0/0, the function is undefined at that point
Tip 4: For radicals, ensure the radicand is non-negative when substituting
Key Properties: Continuity requirement, function definition at point, algebraic evaluation
Applications: Quick limit evaluation, continuity verification, function analysis
Essential Conditions:

• Function must be defined: f(a) must exist

• Function must be continuous: limx→a f(x) = f(a)

• Valid domain: The point a must be in the domain of f(x)

• No indeterminate forms: Substitution should not yield 0/0, ∞/∞, etc.

Solution: Exercises 1 to 3
1 Polynomial Function
Exercise 1
Find:
limx→2 (x³ - 3x² + 2x + 1)
Definition:

Polynomial Function: Continuous everywhere, so direct substitution is valid

Step-by-step Method:
  1. Verify the function is continuous at x = 2
  2. Substitute x = 2 into the polynomial
  3. Perform the arithmetic calculations
  4. State the final answer
Step 1: Verify continuity

f(x) = x³ - 3x² + 2x + 1 is a polynomial function

Polynomials are continuous for all real numbers

Therefore, f(x) is continuous at x = 2

Step 2: Substitute x = 2

limx→2 (x³ - 3x² + 2x + 1) = f(2)

= (2)³ - 3(2)² + 2(2) + 1

Step 3: Calculate the expression

= 8 - 3(4) + 4 + 1

= 8 - 12 + 4 + 1

= 1

Step 4: Verification

Since f(2) = 1, and f(x) is continuous at x = 2, the limit equals 1

limx→2 (x³ - 3x² + 2x + 1) = 1
Final answer:

The limit equals 1 by direct substitution

Applied rules:

• Polynomial continuity: Polynomials are continuous everywhere

• Direct substitution: Valid for continuous functions

• Arithmetic evaluation: Standard order of operations

2 Rational Function
Exercise 2
Find:
limx→3 (x² + 2x - 1)/(x + 1)
Definition:

Rational Function: Continuous wherever the denominator is non-zero

Step 1: Check domain restriction

The denominator is x + 1

When x = 3: 3 + 1 = 4 ≠ 0

Since the denominator is non-zero at x = 3, the function is defined and continuous

Step 2: Apply direct substitution

limx→3 (x² + 2x - 1)/(x + 1) = (3² + 2(3) - 1)/(3 + 1)

Step 3: Calculate numerator

3² + 2(3) - 1 = 9 + 6 - 1 = 14

Step 4: Calculate denominator

3 + 1 = 4

Step 5: Find the limit

= 14/4 = 7/2

Step 6: Verification

Since the function is continuous at x = 3 (denominator ≠ 0), direct substitution is valid

limx→3 (x² + 2x - 1)/(x + 1) = 7/2
Final answer:

The limit equals 7/2 by direct substitution

Applied rules:

• Rational function continuity: Continuous where denominator ≠ 0

• Domain verification: Check that denominator is non-zero at limit point

• Direct substitution: Valid when function is continuous at the point

3 Radical Function
Exercise 3
Find:
limx→4 √(x + 5)
Definition:

Radical Function: Continuous wherever the radicand is non-negative

Step 1: Check domain restriction

The radicand is x + 5

For the square root to be defined: x + 5 ≥ 0

When x = 4: 4 + 5 = 9 ≥ 0 ✓

Since the radicand is non-negative at x = 4, the function is defined and continuous

Step 2: Apply direct substitution

limx→4 √(x + 5) = √(4 + 5)

Step 3: Calculate the radicand

4 + 5 = 9

Step 4: Calculate the square root

√9 = 3

Step 5: Verification

Since √(x + 5) is continuous at x = 4 (radicand ≥ 0), direct substitution is valid

limx→4 √(x + 5) = 3
Final answer:

The limit equals 3 by direct substitution

Applied rules:

• Radical function continuity: Continuous where radicand ≥ 0

• Domain verification: Check that radicand is non-negative at limit point

• Direct substitution: Valid when function is continuous at the point

Solution: Exercises 4 to 5
4 Trigonometric Function
Exercise 4
Find:
limx→π/4 (sin x + cos x)
Definition:

Trigonometric Function: Continuous wherever defined

Step 1: Check continuity

sin x and cos x are continuous for all real numbers

Therefore, f(x) = sin x + cos x is continuous for all real numbers

In particular, f(x) is continuous at x = π/4

Step 2: Apply direct substitution

limx→π/4 (sin x + cos x) = sin(π/4) + cos(π/4)

Step 3: Calculate sin(π/4)

sin(π/4) = √2/2

Step 4: Calculate cos(π/4)

cos(π/4) = √2/2

Step 5: Add the results

sin(π/4) + cos(π/4) = √2/2 + √2/2 = 2√2/2 = √2

Step 6: Verification

Since trigonometric functions are continuous at all points in their domain, direct substitution is valid

limx→π/4 (sin x + cos x) = √2
Final answer:

The limit equals √2 by direct substitution

Applied rules:

• Trigonometric continuity: sin x and cos x are continuous everywhere

Sum of continuous functions: Also continuous

• Direct substitution: Valid for continuous functions

5 When Direct Substitution Fails
Exercise 5
Attempt to find:
limx→2 (x² - 4)/(x - 2)
by direct substitution
Definition:

Undefined Point: When direct substitution yields an indeterminate form

Step 1: Attempt direct substitution

limx→2 (x² - 4)/(x - 2) = (2² - 4)/(2 - 2) = (4 - 4)/(0) = 0/0

Step 2: Identify the issue

The result 0/0 is an indeterminate form

This indicates that the function is undefined at x = 2

Direct substitution cannot be used because the function is not continuous at x = 2

Step 3: Factor the numerator

Instead of direct substitution, we must factor:

x² - 4 = (x - 2)(x + 2)

Step 4: Simplify the expression

(x² - 4)/(x - 2) = (x - 2)(x + 2)/(x - 2) = x + 2 (for x ≠ 2)

Step 5: Apply limit to simplified function

limx→2 (x² - 4)/(x - 2) = limx→2 (x + 2) = 2 + 2 = 4

Step 6: Conclusion

Direct substitution failed because the function is undefined at x = 2

We needed algebraic manipulation to find the limit

Direct substitution yields 0/0 (indeterminate form), but limx→2 (x² - 4)/(x - 2) = 4
Final answer:

Direct substitution fails due to indeterminate form, but limit exists and equals 4

Applied rules:

• Indeterminate forms: 0/0 indicates direct substitution fails

• Function continuity: Direct substitution requires continuity

• Algebraic manipulation: Required when direct substitution fails

Questions & Answers

Question: How do I know when I can use direct substitution versus when I need to do algebraic manipulation?

Answer: Use this decision tree:

  1. Is the function continuous at the limit point? Polynomials: yes everywhere. Rational functions: yes where denominator ≠ 0. Radicals: yes where radicand ≥ 0.
  2. Try direct substitution: Substitute the value into the function
  3. Does it yield a real number? If yes, that's your answer.
  4. Does it yield 0/0, ∞/∞, ∞ - ∞, etc.? If yes, direct substitution fails.

In Exercise 5, direct substitution gave 0/0, indicating we need algebraic manipulation. In Exercises 1-4, direct substitution worked because the functions were continuous at the limit points.

Question: In Exercise 5, the function (x² - 4)/(x - 2) is undefined at x = 2, but the limit exists. What's the significance of this?

Answer: This demonstrates a removable discontinuity:

  • Function undefined: f(2) is undefined because it causes division by zero
  • Limit exists: limx→2 f(x) = 4 exists
  • Removable discontinuity: We could redefine f(2) = 4 to make the function continuous
  • Geometric interpretation: The graph has a hole at (2, 4) but approaches that point

This is why we say the limit describes the behavior of the function near the point, not necessarily at the point. The function values approach 4 even though f(2) is undefined.

Question: Why do polynomials always work with direct substitution? Is this always true?

Answer: Yes, polynomials always work with direct substitution because they are continuous everywhere:

  1. Basic building blocks: Constants and f(x) = x are continuous
  2. Products preserved: If f and g are continuous, then fg is continuous
  3. Sums preserved: If f and g are continuous, then f + g is continuous
  4. Conclusion: Since polynomials are sums of products of constants and powers of x, they're always continuous

This is why in Exercise 1, we could directly substitute x = 2 into the polynomial x³ - 3x² + 2x + 1 without any concerns. The polynomial is continuous at x = 2, so the limit equals the function value.