Solved Exercises on Limits Introduction in Differential Calculus

Master limits: intuitive concept, limit evaluation, and foundational calculus concepts through these 5 detailed exercises.

Limits Fundamentals
\(\lim_{x \to a} f(x) = L\)
Limit Definition
Key Definitions:

Limit: The value that f(x) approaches as x approaches a, regardless of whether f(a) is defined

One-sided limits: limx→a⁻ f(x) (from left) and limx→a⁺ f(x) (from right)

Continuity: f is continuous at a if limx→a f(x) = f(a)

Indeterminate forms: Expressions like 0/0, ∞/∞, ∞ - ∞ that require special techniques

Limit Evaluation Techniques:
  1. Direct substitution: Plug in the value if function is continuous
  2. Factoring: Cancel common factors to resolve 0/0 forms
  3. Rationalizing: Multiply by conjugate for radical expressions
  4. Special limits: Use known limits like limx→0 (sin x)/x = 1
  5. One-sided analysis: Check left and right limits separately
Tip 1: A limit exists if and only if both one-sided limits exist and are equal
Tip 2: The function value f(a) may not equal the limit value
Tip 3: Always check for indeterminate forms when substituting
Tip 4: Graph the function to visualize the limit behavior
Key Properties: Sum, product, quotient rules; squeeze theorem; composition rules
Applications: Derivatives, continuity, asymptotic behavior, instantaneous rate of change
Essential Formulas:

• Limit definition: ∀ε > 0, ∃δ > 0 such that 0 < |x - a| < δ ⇒ |f(x) - L| < ε

• Sum rule: lim(f + g) = lim f + lim g

• Product rule: lim(f · g) = lim f · lim g

• Quotient rule: lim(f/g) = lim f / lim g (if lim g ≠ 0)

Solution: Exercises 1 to 3
1 Direct Substitution
Exercise 1
Evaluate:
limx→3 (2x² - 5x + 1)
Definition:

Direct Substitution: For polynomial functions, the limit equals the function value at the point

Step-by-step Method:
  1. Identify the function type (polynomial, rational, etc.)
  2. Check if the function is continuous at the point
  3. Apply direct substitution if continuous
  4. Verify the result
Step 1: Analyze the function

f(x) = 2x² - 5x + 1 is a polynomial function

Polynomials are continuous everywhere, including at x = 3

Step 2: Apply direct substitution

limx→3 (2x² - 5x + 1) = 2(3)² - 5(3) + 1

Step 3: Calculate the result

= 2(9) - 15 + 1 = 18 - 15 + 1 = 4

Step 4: Verification

Since f(3) = 2(9) - 5(3) + 1 = 18 - 15 + 1 = 4

We have limx→3 f(x) = f(3), confirming continuity

limx→3 (2x² - 5x + 1) = 4
Final answer:

The limit equals 4 since polynomials are continuous everywhere

Applied rules:

• Polynomial continuity: Polynomials are continuous at every point

• Direct substitution: Valid for continuous functions

• Algebraic evaluation: Substitute the limiting value

2 Factoring Technique
Exercise 2
Evaluate:
limx→2 (x² - 4)/(x - 2)
Definition:

Factoring Technique: Resolve indeterminate forms like 0/0 by factoring and canceling common terms

Step 1: Check for indeterminate form

Substituting x = 2: (2² - 4)/(2 - 2) = (4 - 4)/(0) = 0/0

This is an indeterminate form requiring algebraic manipulation

Step 2: Factor the numerator

x² - 4 = (x - 2)(x + 2) [difference of squares]

Step 3: Simplify the expression

(x² - 4)/(x - 2) = [(x - 2)(x + 2)]/(x - 2)

= x + 2 (for x ≠ 2)

Step 4: Evaluate the simplified limit

limx→2 (x² - 4)/(x - 2) = limx→2 (x + 2)

= 2 + 2 = 4

Step 5: Verify the result

The original function has a removable discontinuity at x = 2

The limit exists and equals 4, though f(2) is undefined

limx→2 (x² - 4)/(x - 2) = 4
Final answer:

The limit equals 4 after factoring and simplifying

Applied rules:

• Indeterminate form identification: 0/0 requires algebraic manipulation

• Difference of squares: a² - b² = (a - b)(a + b)

• Canceling common factors: Valid when x ≠ a (the point being approached)

3 Rationalizing Technique
Exercise 3
Evaluate:
limx→0 (√(x + 4) - 2)/x
Definition:

Rationalizing Technique: Multiply by conjugate to eliminate radicals in indeterminate forms

Step 1: Check for indeterminate form

Substituting x = 0: (√(0 + 4) - 2)/0 = (√4 - 2)/0 = (2 - 2)/0 = 0/0

This is an indeterminate form requiring rationalization

Step 2: Multiply by the conjugate

Multiply numerator and denominator by √(x + 4) + 2:

(√(x + 4) - 2)/x × (√(x + 4) + 2)/(√(x + 4) + 2)

Step 3: Simplify the numerator

Numerator: (√(x + 4) - 2)(√(x + 4) + 2) = (√(x + 4))² - 2² = (x + 4) - 4 = x

Step 4: Simplify the entire expression

[x]/[x(√(x + 4) + 2)] = 1/(√(x + 4) + 2) (for x ≠ 0)

Step 5: Evaluate the limit

limx→0 (√(x + 4) - 2)/x = limx→0 1/(√(x + 4) + 2)

= 1/(√(0 + 4) + 2) = 1/(√4 + 2) = 1/(2 + 2) = 1/4

limx→0 (√(x + 4) - 2)/x = 1/4
Final answer:

The limit equals 1/4 after rationalizing the numerator

Applied rules:

• Conjugate multiplication: (a - b)(a + b) = a² - b²

• Rationalization: Eliminates radicals from numerator/denominator

• Algebraic simplification: Cancel common factors when possible

Solution: Exercises 4 to 5
4 One-Sided Limits
Exercise 4
Evaluate:
limx→0 |x|/x
and determine if the limit exists
Definition:

One-Sided Limits: Approach from left (x → a⁻) or right (x → a⁺) separately

Step 1: Analyze the absolute value function

|x| = { x if x ≥ 0, -x if x < 0 }

So |x|/x = { 1 if x > 0, -1 if x < 0 } (undefined at x = 0)

Step 2: Evaluate the right-hand limit

limx→0⁺ |x|/x = limx→0⁺ x/x = limx→0⁺ 1 = 1

Step 3: Evaluate the left-hand limit

limx→0⁻ |x|/x = limx→0⁻ (-x)/x = limx→0⁻ (-1) = -1

Step 4: Compare one-sided limits

limx→0⁺ |x|/x = 1 ≠ -1 = limx→0⁻ |x|/x

Since the one-sided limits are not equal, the two-sided limit does not exist

Step 5: Conclusion

The function has a jump discontinuity at x = 0

The limit does not exist, but both one-sided limits exist

limx→0⁺ |x|/x = 1, limx→0⁻ |x|/x = -1, ∴ limx→0 |x|/x does not exist
Final answer:

The limit does not exist since left and right limits are different

Applied rules:

• One-sided limit definition: Consider approach from each side separately

• Limit existence: Two-sided limit exists iff both one-sided limits exist and are equal

• Absolute value: Break into cases based on the sign of the argument

5 Piecewise Function Limit
Exercise 5
Let f(x) = { x² if x < 1, 2x - 1 if x ≥ 1 }. Find:
limx→1 f(x)
Definition:

Piecewise Function: Function defined by different expressions on different intervals

Step 1: Identify the piecewise function

f(x) = { x² if x < 1, 2x - 1 if x ≥ 1 }

We need to approach x = 1 from both sides

Step 2: Evaluate the left-hand limit

As x approaches 1 from the left (x < 1), we use f(x) = x²

limx→1⁻ f(x) = limx→1⁻ x² = 1² = 1

Step 3: Evaluate the right-hand limit

As x approaches 1 from the right (x ≥ 1), we use f(x) = 2x - 1

limx→1⁺ f(x) = limx→1⁺ (2x - 1) = 2(1) - 1 = 1

Step 4: Compare one-sided limits

limx→1⁻ f(x) = 1 = limx→1⁺ f(x)

Since both one-sided limits exist and are equal, the two-sided limit exists

Step 5: Find the function value at x = 1

f(1) = 2(1) - 1 = 1 (using the x ≥ 1 piece)

Since limx→1 f(x) = f(1), the function is continuous at x = 1

limx→1 f(x) = 1
Final answer:

The limit exists and equals 1, and the function is continuous at x = 1

Applied rules:

• Piecewise evaluation: Use the appropriate piece based on the approach direction

• One-sided limits: Critical for piecewise functions at boundary points

• Continuity: Function is continuous at a point if limit equals function value

Questions & Answers

Question: I don't understand why we need limits. Can't we just substitute the value directly into the function?

Answer: Great question! Direct substitution only works when the function is continuous at that point. Consider Exercise 2: f(x) = (x² - 4)/(x - 2).

  • At x = 2, the function is undefined (division by zero)
  • However, as x gets closer and closer to 2, f(x) approaches 4
  • So limx→2 f(x) = 4, even though f(2) doesn't exist

Limits allow us to understand the behavior of functions near points where they might be undefined or behave strangely. They're fundamental to defining derivatives and integrals!

Question: In Exercise 4, why doesn't the limit exist when the left and right limits are different? What's the intuition?

Answer: Think of a limit as asking "Where is the function heading as x approaches a?"

  • If approaching from the left leads to value L₁ and from the right leads to value L₂ ≠ L₁, the function doesn't know where to go
  • For the limit to exist, the function must approach the same value regardless of how x approaches a
  • This is why limx→0 |x|/x doesn't exist - it heads toward +1 from the right and -1 from the left

The formal definition requires that for any small distance ε, we can find a small interval δ where all function values stay within ε of the limit. This is impossible when left and right limits differ.

Question: How do I know which piece of a piecewise function to use when evaluating one-sided limits?

Answer: The key is to consider which values of x are involved in the approach:

  1. For limx→a⁻: Use the piece defined for x < a (values slightly less than a)
  2. For limx→a⁺: Use the piece defined for x > a (values slightly greater than a)
  3. For limx→a: Both one-sided limits must exist and be equal

In Exercise 5, when evaluating limx→1⁻ f(x), we consider x values just less than 1, so we use f(x) = x². For limx→1⁺ f(x), we consider x values just greater than 1, so we use f(x) = 2x - 1.

Always pay attention to the inequality signs in the piecewise definition!