Squeeze Theorem: Also called Sandwich Theorem, states that if a function is bounded by two functions with the same limit, then the middle function has that same limit
Bounding Functions: Functions g(x) and h(x) that "squeeze" or "sandwich" f(x) between them
Comparison Principle: If f(x) is trapped between g(x) and h(x), and both bounds approach the same limit, then f(x) must also approach that limit
- Identify the function: Find f(x) whose limit you need to evaluate
- Find bounding functions: Find g(x) and h(x) such that g(x) ≤ f(x) ≤ h(x)
- Verify the inequalities: Ensure the inequalities hold near the point of interest
- Calculate bounds: Find limx→a g(x) and limx→a h(x)
- Confirm equality: Verify that both bounds approach the same limit
• Inequality condition: g(x) ≤ f(x) ≤ h(x) in a neighborhood of a
• Limit equality: limx→a g(x) = limx→a h(x) = L
• Function behavior: f(x) is squeezed between g(x) and h(x)
• Point inclusion: Inequalities hold for x ≠ a near a
Oscillating Function: Uses the bounded nature of sine function
- Identify the bounded function: sin(1/x) is bounded between -1 and 1
- Establish the inequality: -1 ≤ sin(1/x) ≤ 1
- Multiply by x²: -x² ≤ x² sin(1/x) ≤ x²
- Find limits of bounding functions
- Apply squeeze theorem
For all x ≠ 0, we have -1 ≤ sin(1/x) ≤ 1
This is because the sine function always has values between -1 and 1
Multiplying all parts by x² (note: x² ≥ 0 for all x ≠ 0):
-x² ≤ x² sin(1/x) ≤ x²
Let g(x) = -x² and h(x) = x²
We have g(x) ≤ x² sin(1/x) ≤ h(x) for all x ≠ 0
limx→0 g(x) = limx→0 (-x²) = -0² = 0
limx→0 h(x) = limx→0 x² = 0² = 0
Since g(x) ≤ x² sin(1/x) ≤ h(x) and both g(x) and h(x) approach 0 as x → 0
By the squeeze theorem: limx→0 x² sin(1/x) = 0
The function x² sin(1/x) oscillates rapidly near x = 0, but the amplitude is controlled by x² → 0
So the oscillations are damped and approach 0
The limit equals 0 by the squeeze theorem
• Bounded function: |sin(1/x)| ≤ 1 for all x ≠ 0
• Sign preservation: Multiplying by positive x² preserves inequalities
• Squeeze theorem: Both bounds approach same limit
Trigonometric Limit: Uses the bounded nature of cosine function
For all x ≠ 0, we have -1 ≤ cos(1/x²) ≤ 1
The cosine function is always bounded between -1 and 1
Multiplying all parts by x (we need to consider cases for x > 0 and x < 0 separately)
For x > 0: -x ≤ x cos(1/x²) ≤ x
For x < 0: -x ≥ x cos(1/x²) ≥ x (sign flips when multiplying by negative number)
Instead, we can use absolute values: |x cos(1/x²)| = |x| · |cos(1/x²)| ≤ |x| · 1 = |x|
Therefore: -|x| ≤ x cos(1/x²) ≤ |x|
Let g(x) = -|x| and h(x) = |x|
We have g(x) ≤ x cos(1/x²) ≤ h(x) for all x ≠ 0
limx→0 g(x) = limx→0 (-|x|) = -0 = 0
limx→0 h(x) = limx→0 |x| = 0
Since g(x) ≤ x cos(1/x²) ≤ h(x) and both g(x) and h(x) approach 0 as x → 0
By the squeeze theorem: limx→0 x cos(1/x²) = 0
The function x cos(1/x²) oscillates rapidly as x → 0, but the amplitude is controlled by |x| → 0
So the oscillations are damped and approach 0
The limit equals 0 by the squeeze theorem
• Bounded function: |cos(1/x²)| ≤ 1 for all x ≠ 0
• Absolute value technique: Handle sign changes systematically
• Squeeze theorem: Both bounds approach same limit
Squared Trigonometric Function: Uses the bounded nature of squared sine function
For all x ≠ 0, we have 0 ≤ sin²(1/x) ≤ 1
Since sin²(1/x) = [sin(1/x)]² ≥ 0 and |sin(1/x)| ≤ 1, we have sin²(1/x) ≤ 1
Multiplying all parts by x² (note: x² ≥ 0 for all x):
0 ≤ x² sin²(1/x) ≤ x²
Let g(x) = 0 and h(x) = x²
We have g(x) ≤ x² sin²(1/x) ≤ h(x) for all x ≠ 0
limx→0 g(x) = limx→0 0 = 0
limx→0 h(x) = limx→0 x² = 0
Since g(x) ≤ x² sin²(1/x) ≤ h(x) and both g(x) and h(x) approach 0 as x → 0
By the squeeze theorem: limx→0 x² sin²(1/x) = 0
This is similar to Exercise 1, but sin²(1/x) is always non-negative
The oscillations are still controlled by x² → 0
For any bounded function B(x) where |B(x)| ≤ M for some constant M:
limx→0 x² B(x) = 0 when the factor x² → 0
The limit equals 0 by the squeeze theorem
• Bounded function: 0 ≤ sin²(1/x) ≤ 1 for all x ≠ 0
• Non-negativity: sin²(1/x) ≥ 0, providing natural lower bound of 0
• Damping factor: x² → 0 controls the oscillations
Fundamental Trigonometric Limit: Uses geometric inequalities from the unit circle
For 0 < x < π/2, consider the unit circle with angle x (in radians)
We have the inequality: sin x < x < tan x
This comes from comparing areas: area of triangle < area of sector < area of larger triangle
Since sin x > 0 for 0 < x < π/2, we can divide all parts by sin x:
1 < x/sin x < tan x/sin x = 1/cos x
Taking reciprocals reverses the inequality signs:
1 > sin x/x > cos x
Or equivalently: cos x < sin x/x < 1
For -π/2 < x < 0, let x = -t where t > 0
sin(-t)/(-t) = -sin(t)/(-t) = sin(t)/t
And cos(-t) = cos(t)
So the same inequality holds: cos x < sin x/x < 1
For x ∈ (-π/2, π/2) \ {0}, we have:
cos x < (sin x)/x < 1
Let g(x) = cos x and h(x) = 1
limx→0 g(x) = limx→0 cos x = cos(0) = 1
limx→0 h(x) = limx→0 1 = 1
Since cos x ≤ (sin x)/x ≤ 1 and both cos x and 1 approach 1 as x → 0
By the squeeze theorem: limx→0 (sin x)/x = 1
This is the famous fundamental limit that equals 1
It's essential for deriving the derivative of sin x
The limit equals 1 by the squeeze theorem using geometric inequalities
• Geometric approach: Unit circle and area comparisons
• Inequality manipulation: Dividing and taking reciprocals
• Symmetry consideration: Handle positive and negative cases
Non-existent Limit: Demonstrates when squeeze theorem conditions fail
We know that -1 ≤ sin(1/x) ≤ 1 for all x ≠ 0
So we have g(x) = -1 ≤ sin(1/x) ≤ 1 = h(x)
limx→0 g(x) = limx→0 (-1) = -1
limx→0 h(x) = limx→0 1 = 1
Since -1 ≠ 1, the squeeze theorem conditions are not satisfied
The squeeze theorem requires both bounding functions to approach the same limit
Here, limx→0 g(x) ≠ limx→0 h(x), so the theorem doesn't apply
As x → 0, the function sin(1/x) oscillates infinitely between -1 and 1
It doesn't settle down to approach any single value
Consider xₙ = 1/(nπ) → 0: sin(1/xₙ) = sin(nπ) = 0
Consider yₙ = 1/(π/2 + 2nπ) → 0: sin(1/yₙ) = sin(π/2 + 2nπ) = 1
Since different sequences approaching 0 give different function values, the limit does not exist
In Exercises 1-3, we multiplied oscillating functions by damping factors (x², x) that approach 0
This controlled the oscillations and allowed the squeeze theorem to work
Here, sin(1/x) oscillates without any damping factor
The squeeze theorem works when oscillating functions are multiplied by factors that approach 0
It fails when the oscillations are not controlled
The limit does not exist because squeeze theorem conditions are not satisfied
• Condition check: Both bounds must approach the same limit
• Counterexample: Different sequences yielding different limits
• Damping factor: Essential for controlling oscillations