Solved Exercises on Types of Discontinuities in Differential Calculus

Master the types of discontinuities: removable, jump, and infinite through these 5 detailed exercises with visual representations and step-by-step solutions.

Solution: Exercises 1 to 3
1 Removable discontinuity
Exercise 1
Analyze the function:
\(f(x) = \frac{x^2 - 4}{x - 2}\) at \(x = 2\)
Definition:

Removable discontinuity: A point where a function is undefined but has a finite limit, allowing redefinition to make it continuous.

Analysis method:
  1. Identify where the function is undefined
  2. Factor numerator and denominator if possible
  3. Simplify the expression
  4. Evaluate the limit at the point of discontinuity
  5. Determine if the limit exists and is finite
Original function
\(f(x) = \frac{x^2 - 4}{x - 2}\)
Factored form
\(f(x) = \frac{(x+2)(x-2)}{x-2}\)
Step 1: Factor the numerator

\(x^2 - 4 = (x+2)(x-2)\) (difference of squares)

Step 2: Simplify the expression

\(f(x) = \frac{(x+2)(x-2)}{x-2} = x+2\) for \(x \neq 2\)

Step 3: Evaluate the limit

\(\lim_{x \to 2} f(x) = \lim_{x \to 2} (x+2) = 4\)

Step 4: Check function value

\(f(2)\) is undefined because denominator becomes zero

\(\lim_{x \to 2} f(x) = 4\) but \(f(2)\) is undefined
Final answer:

This is a removable discontinuity at \(x = 2\). The function can be made continuous by defining \(f(2) = 4\).

Applied rules:

• Difference of squares: \(a^2 - b^2 = (a+b)(a-b)\)

• Limit evaluation: After simplification, evaluate the limit of the simpler expression

• Continuity requirement: Function is continuous if \(\lim_{x \to c} f(x) = f(c)\)

2 Jump discontinuity
Exercise 2
Analyze the piecewise function:
\(f(x) = \begin{cases} x + 1 & \text{if } x < 0 \\ x - 1 & \text{if } x \geq 0 \end{cases}\) at \(x = 0\)
Definition:

Jump discontinuity: Both left and right limits exist but are not equal, causing a "jump" in the function's value.

Left limit
\(\lim_{x \to 0^-} f(x) = 1\)
Right limit
\(\lim_{x \to 0^+} f(x) = -1\)
Function value
\(f(0) = -1\)
Step 1: Evaluate left-hand limit

For \(x < 0\), \(f(x) = x + 1\)

\(\lim_{x \to 0^-} f(x) = \lim_{x \to 0^-} (x + 1) = 0 + 1 = 1\)

Step 2: Evaluate right-hand limit

For \(x \geq 0\), \(f(x) = x - 1\)

\(\lim_{x \to 0^+} f(x) = \lim_{x \to 0^+} (x - 1) = 0 - 1 = -1\)

Step 3: Compare the limits

Since \(\lim_{x \to 0^-} f(x) \neq \lim_{x \to 0^+} f(x)\), there is a jump discontinuity

Step 4: Determine function value

Since \(x = 0\) satisfies \(x \geq 0\), \(f(0) = 0 - 1 = -1\)

\(\lim_{x \to 0^-} f(x) = 1 \neq \lim_{x \to 0^+} f(x) = -1\)
Final answer:

This is a jump discontinuity at \(x = 0\). The function jumps from 1 (left) to -1 (right).

Applied rules:

• Left-hand limit: Evaluate using the definition for \(x < c\)

• Right-hand limit: Evaluate using the definition for \(x > c\)

• Jump discontinuity condition: \(\lim_{x \to c^-} f(x) \neq \lim_{x \to c^+} f(x)\)

3 Infinite discontinuity
Exercise 3
Analyze the function:
\(f(x) = \frac{1}{x-3}\) at \(x = 3\)
Definition:

Infinite discontinuity: At least one of the one-sided limits approaches infinity (or negative infinity).

Left limit
\(\lim_{x \to 3^-} f(x) = -\infty\)
Right limit
\(\lim_{x \to 3^+} f(x) = +\infty\)
Function value
undefined
Step 1: Identify the point of discontinuity

Function is undefined when denominator equals zero: \(x - 3 = 0\), so \(x = 3\)

Step 2: Evaluate left-hand limit

As \(x \to 3^-\), \(x - 3 \to 0^-\) (negative and approaching 0)

\(\lim_{x \to 3^-} \frac{1}{x-3} = -\infty\)

Step 3: Evaluate right-hand limit

As \(x \to 3^+\), \(x - 3 \to 0^+\) (positive and approaching 0)

\(\lim_{x \to 3^+} \frac{1}{x-3} = +\infty\)

Step 4: Determine the type of discontinuity

Both one-sided limits approach infinity (but in opposite directions), indicating an infinite discontinuity

\(\lim_{x \to 3^-} f(x) = -\infty\) and \(\lim_{x \to 3^+} f(x) = +\infty\)
Final answer:

This is an infinite discontinuity at \(x = 3\). The function has vertical asymptotes at this point.

Applied rules:

• Rational function behavior: When denominator approaches 0, function approaches infinity

• Sign analysis: Determine the sign of the denominator as it approaches 0

• Infinite discontinuity condition: At least one one-sided limit approaches \(\pm\infty\)

Discontinuity Types, Rules and Methods
\(\lim_{x \to c} f(x) \neq f(c)\)
Definition of Discontinuity
Removable
\(\lim_{x \to c} f(x) = L\), \(f(c)\) undefined
Function can be redefined to be continuous
Jump
\(\lim_{x \to c^-} f(x) \neq \lim_{x \to c^+} f(x)\)
Limits exist but are not equal
Infinite
\(\lim_{x \to c} f(x) = \pm\infty\)
Limit approaches infinity
Key definitions:

Continuous function: A function is continuous at a point if \(\lim_{x \to c} f(x) = f(c)\)

Discontinuous function: A function is discontinuous at a point if it fails the continuity condition

Vertical asymptote: A vertical line that a function approaches but never reaches

Complete methodology:
  1. Identify points of potential discontinuity: Look for division by zero, piecewise function boundaries, etc.
  2. Calculate one-sided limits: Find \(\lim_{x \to c^-} f(x)\) and \(\lim_{x \to c^+} f(x)\)
  3. Evaluate function value: Find \(f(c)\) if it exists
  4. Determine type of discontinuity: Based on the relationship between limits and function value
Tip 1: For rational functions, factor numerator and denominator to identify removable discontinuities.
Tip 2: For piecewise functions, always check the boundary points where the definition changes.
Tip 3: Infinite discontinuities often occur at vertical asymptotes of rational functions.
Tip 4: Remember that removable discontinuities can be "fixed" by redefining the function at that point.
Common errors: Forgetting to check both one-sided limits, misidentifying removable vs infinite discontinuities, ignoring piecewise function boundaries.
Exam preparation: Practice identifying different types of discontinuities, sketch graphs showing discontinuities, and solve problems involving limits at discontinuity points.
Classification of Discontinuities:

• Removable: \(\lim_{x \to c} f(x)\) exists but \(\lim_{x \to c} f(x) \neq f(c)\) or \(f(c)\) is undefined

• Jump: Both \(\lim_{x \to c^-} f(x)\) and \(\lim_{x \to c^+} f(x)\) exist but are not equal

• Infinite: At least one of \(\lim_{x \to c^-} f(x)\) or \(\lim_{x \to c^+} f(x)\) is \(\pm\infty\)

Solution: Exercises 4 to 5
4 Mixed discontinuity analysis
Exercise 4
Analyze the function:
\(f(x) = \begin{cases} \frac{x^2 - 1}{x - 1} & \text{if } x \neq 1 \\ 3 & \text{if } x = 1 \end{cases}\) at \(x = 1\)
Definition:

Mixed discontinuity: A combination of discontinuity types in piecewise functions where the function's definition affects continuity.

Simplified function
\(\frac{x^2 - 1}{x - 1} = x + 1\)
Limit calculation
\(\lim_{x \to 1} f(x) = 2\)
Function value
\(f(1) = 3\)
Step 1: Simplify the function for \(x \neq 1\)

Factor the numerator: \(x^2 - 1 = (x+1)(x-1)\)

\(\frac{x^2 - 1}{x - 1} = \frac{(x+1)(x-1)}{x-1} = x + 1\) for \(x \neq 1\)

Step 2: Calculate the limit

\(\lim_{x \to 1} f(x) = \lim_{x \to 1} (x + 1) = 2\)

Step 3: Compare limit with function value

\(\lim_{x \to 1} f(x) = 2\) but \(f(1) = 3\)

Step 4: Determine the type of discontinuity

Since the limit exists but does not equal the function value, this is a removable discontinuity

\(\lim_{x \to 1} f(x) = 2 \neq f(1) = 3\)
Final answer:

This is a removable discontinuity at \(x = 1\). The function can be made continuous by redefining \(f(1) = 2\).

Applied rules:

• Difference of squares: \(a^2 - b^2 = (a+b)(a-b)\)

• Continuity condition: Function is continuous if \(\lim_{x \to c} f(x) = f(c)\)

• Removable discontinuity identification: Limit exists but doesn't equal function value

5 Complex rational function
Exercise 5
Analyze the function:
\(f(x) = \frac{x^2 + 3x + 2}{x^2 - 4}\) for all discontinuities
Definition:

Multiple discontinuities: A function may have several points of discontinuity depending on its domain restrictions.

Factored form
\(f(x) = \frac{(x+1)(x+2)}{(x+2)(x-2)}\)
Simplified form
\(f(x) = \frac{x+1}{x-2}\) for \(x \neq -2\)
Step 1: Factor numerator and denominator

Numerator: \(x^2 + 3x + 2 = (x+1)(x+2)\)

Denominator: \(x^2 - 4 = (x+2)(x-2)\)

Step 2: Identify points of discontinuity

Denominator equals zero when \(x = -2\) or \(x = 2\)

Step 3: Analyze \(x = -2\)

\(f(x) = \frac{(x+1)(x+2)}{(x+2)(x-2)} = \frac{x+1}{x-2}\) for \(x \neq -2\)

\(\lim_{x \to -2} f(x) = \frac{-2+1}{-2-2} = \frac{-1}{-4} = \frac{1}{4}\)

Since \(f(-2)\) is undefined but the limit exists, this is a removable discontinuity.

Step 4: Analyze \(x = 2\)

\(f(x) = \frac{x+1}{x-2}\) approaches \(\pm\infty\) as \(x \to 2\)

Left limit: \(\lim_{x \to 2^-} f(x) = -\infty\)

Right limit: \(\lim_{x \to 2^+} f(x) = +\infty\)

Since the limits approach infinity, this is an infinite discontinuity.

Removable disc. at \(x = -2\), Infinite disc. at \(x = 2\)
Final answer:

The function has a removable discontinuity at \(x = -2\) and an infinite discontinuity at \(x = 2\).

Applied rules:

• Factoring quadratic expressions: Look for patterns like difference of squares

• Common factor cancellation: Identifies removable discontinuities

• Infinite limit behavior: When denominator approaches 0 while numerator approaches non-zero value

Detailed Course: Types of Discontinuities
\(\lim_{x \to c^-} f(x) \neq \lim_{x \to c^+} f(x) \Rightarrow \text{Jump Disc.}\)
Jump Discontinuity Condition
Key definitions:

Continuity at a point: A function \(f(x)\) is continuous at \(x = c\) if and only if:

  1. \(f(c)\) is defined
  2. \(\lim_{x \to c} f(x)\) exists
  3. \(\lim_{x \to c} f(x) = f(c)\)

Discontinuity: A function is discontinuous at \(x = c\) if it fails any of the above conditions.

Complete methodology:
  1. Locate potential discontinuities: Points where denominator is zero, piecewise function boundaries, etc.
  2. Compute limits: Calculate both one-sided limits at suspected discontinuities
  3. Evaluate function: Find \(f(c)\) if it exists
  4. Classify: Determine which type of discontinuity based on limit behavior
Tip 1: For rational functions, factor both numerator and denominator to identify removable discontinuities.
Tip 2: For piecewise functions, always evaluate the boundary points where the definition changes.
Tip 3: Vertical asymptotes indicate infinite discontinuities in rational functions.
Tip 4: Removable discontinuities can be "fixed" by redefining the function at that specific point.
Common errors: Forgetting to check both one-sided limits, confusing removable with infinite discontinuities, neglecting to factor polynomials before analysis.
Exam preparation: Practice identifying discontinuities in various function forms, sketch graphs showing different types of discontinuities, and work with piecewise functions.
Classification Criteria:

• Removable: \(\lim_{x \to c} f(x)\) exists but \(\lim_{x \to c} f(x) \neq f(c)\) or \(f(c)\) is undefined

• Jump: Both \(\lim_{x \to c^-} f(x)\) and \(\lim_{x \to c^+} f(x)\) exist but are not equal

• Infinite: At least one of \(\lim_{x \to c^-} f(x)\) or \(\lim_{x \to c^+} f(x)\) is \(\pm\infty\)

Visual Comparison of Discontinuity Types
Discontinuity Characteristics
Visual representation of different types of discontinuities with their characteristics:

Analysis: The chart shows the behavior of functions near different types of discontinuities.

  • Removable discontinuities: Function approaches a finite limit but has a "hole" in the graph
  • Jump discontinuities: Function has a "jump" between different finite values
  • Infinite discontinuities: Function approaches infinity near the discontinuity

Questions & Answers

Question: How can I tell if a discontinuity is removable just by looking at the function algebraically? Is there a pattern?

Answer: Yes, there are clear algebraic patterns to identify removable discontinuities:

  • Common factors: Look for common factors in the numerator and denominator of rational functions that can be canceled out.
  • Indeterminate forms: When substituting the point of interest results in \(\frac{0}{0}\), it suggests a removable discontinuity.
  • Factoring: Factor both numerator and denominator completely. If there's a common factor that makes both zero at the same point, it's removable.

For example, in \(f(x) = \frac{x^2 - 4}{x - 2}\), substituting \(x = 2\) gives \(\frac{0}{0}\). Factoring reveals \(\frac{(x+2)(x-2)}{x-2}\), where \((x-2)\) cancels out, confirming a removable discontinuity.

Key insight: After simplification, if the limit exists and is finite, it's a removable discontinuity.

Question: Can a function have both removable and infinite discontinuities? Could you provide an example?

Answer: Absolutely! A function can have multiple types of discontinuities at different points. Here's an example:

Consider \(f(x) = \frac{x^2 - 1}{x^2 - x - 2} = \frac{(x+1)(x-1)}{(x+1)(x-2)}\)

  • At \(x = -1\): The factor \((x+1)\) cancels out, so \(\lim_{x \to -1} f(x) = \frac{-1-1}{-1-2} = \frac{-2}{-3} = \frac{2}{3}\). This is a removable discontinuity.
  • At \(x = 2\): The denominator approaches 0 while the numerator approaches \(-1-2 = -3\), so the function approaches \(\pm\infty\). This is an infinite discontinuity.

The function has both types of discontinuities at different points. This happens frequently in rational functions where the numerator and denominator have different roots.

Tip: Always factor completely and analyze each root separately to identify all discontinuities.

Question: How do I determine if a piecewise function has a jump discontinuity? Is it just when the pieces have different values at the boundary?

Answer: Not exactly! A jump discontinuity occurs when the left-hand limit and right-hand limit both exist but are not equal. It's not just about the function values at the boundary. Here's the process:

  1. Calculate the left-hand limit: \(\lim_{x \to c^-} f(x)\) using the piece that applies for \(x < c\)
  2. Calculate the right-hand limit: \(\lim_{x \to c^+} f(x)\) using the piece that applies for \(x > c\)
  3. If both limits exist but \(\lim_{x \to c^-} f(x) \neq \lim_{x \to c^+} f(x)\), then it's a jump discontinuity

For example, in \(f(x) = \begin{cases} x & \text{if } x < 0 \\ x + 1 & \text{if } x \geq 0 \end{cases}\):

Left limit: \(\lim_{x \to 0^-} f(x) = 0\)

Right limit: \(\lim_{x \to 0^+} f(x) = 1\)

Since \(0 \neq 1\), there's a jump discontinuity at \(x = 0\), even though both pieces are linear functions.

Question: Can a function have a removable discontinuity at a point where it's actually defined? How does that work?

Answer: Yes, absolutely! This happens when the function is defined at a point but the value doesn't match the limit. Here's how:

Consider \(f(x) = \begin{cases} \frac{x^2 - 1}{x - 1} & \text{if } x \neq 1 \\ 5 & \text{if } x = 1 \end{cases}\)

Analysis:

  • For \(x \neq 1\): \(\frac{x^2 - 1}{x - 1} = \frac{(x+1)(x-1)}{x-1} = x+1\)
  • So \(\lim_{x \to 1} f(x) = \lim_{x \to 1} (x+1) = 2\)
  • But \(f(1) = 5\) (as defined in the piecewise function)

Since \(\lim_{x \to 1} f(x) = 2 \neq f(1) = 5\), there's a removable discontinuity at \(x = 1\). The function is defined but not continuous.

To make it continuous, we would redefine \(f(1) = 2\).

Question: Are there any practical applications of understanding different types of discontinuities in real-world scenarios?

Answer: Yes, understanding discontinuities has numerous practical applications:

  • Jump discontinuities: Model sudden changes like switching electrical circuits on/off, stock market price jumps, or population changes due to migration events.
  • Infinite discontinuities: Represent phenomena that approach infinity, such as resonance frequencies in mechanical systems, or the behavior of certain economic models under extreme conditions.
  • Removable discontinuities: Often represent removable "errors" or "holes" in data models that can be corrected with proper interpolation.

In engineering, knowing the type of discontinuity helps determine system stability and response. In economics, it helps model market behaviors and policy impacts.

Understanding these concepts allows us to predict system behavior near critical points and design appropriate responses.