Applications of First-Order Differential Equations: Mixing Problems, Newton's Law of Cooling, and Circuits

Master real-world applications: mixing problems, temperature changes, and electrical circuits through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Mixing problem
Exercise 1
A tank initially contains 100 liters of water with 20 kg of salt dissolved in it. Fresh water flows into the tank at 5 L/min, and the well-stirred mixture flows out at 3 L/min. Find the amount of salt in the tank after t minutes.
Definition:

Mixing problem: A problem involving the rate of change of concentration in a tank where substances are added and removed at different rates.

Modeling approach:
  1. Define variables: Let S(t) = amount of substance at time t
  2. Set up the rate equation: \(\frac{dS}{dt} = \text{rate in} - \text{rate out}\)
  3. Rate in = (concentration of incoming solution) × (flow rate in)
  4. Rate out = (concentration of tank solution) × (flow rate out)
  5. Concentration = amount/volume
  6. Solve the resulting differential equation
Rate Equation
\(\frac{dS}{dt} = \text{rate in} - \text{rate out}\)
Rate in
\(0 \times 5 = 0\)
Rate out
\(\frac{S(t)}{V(t)} \times 3\)
Step 1: Set up the problem

Given information:

  • Initial volume: 100 L
  • Initial salt: 20 kg
  • Flow in: 5 L/min of fresh water (0 kg/L)
  • Flow out: 3 L/min

Volume at time t: \(V(t) = 100 + (5-3)t = 100 + 2t\)

Step 2: Write the rate equation

Let S(t) = amount of salt (kg) at time t

\(\frac{dS}{dt} = \text{rate in} - \text{rate out}\)

Rate in = (concentration of inflow) × (flow rate in) = \(0 \times 5 = 0\)

Rate out = (concentration in tank) × (flow rate out) = \(\frac{S(t)}{100+2t} \times 3 = \frac{3S(t)}{100+2t}\)

Step 3: Formulate the differential equation

\(\frac{dS}{dt} = 0 - \frac{3S(t)}{100+2t}\)

\(\frac{dS}{dt} = -\frac{3S(t)}{100+2t}\)

This is a linear first-order equation: \(\frac{dS}{dt} + \frac{3}{100+2t}S = 0\)

Step 4: Solve the linear equation

This is a separable equation: \(\frac{dS}{S} = -\frac{3}{100+2t}dt\)

Integrating both sides: \(\ln|S| = -\frac{3}{2}\ln|100+2t| + C\)

\(\ln|S| = \ln(100+2t)^{-3/2} + C\)

\(S = e^C(100+2t)^{-3/2}\)

\(S = \frac{K}{(100+2t)^{3/2}}\) where \(K = e^C\)

Step 5: Apply initial condition

At t = 0, S(0) = 20:

\(20 = \frac{K}{(100+0)^{3/2}} = \frac{K}{100^{3/2}} = \frac{K}{1000}\)

\(K = 20 \times 1000 = 20000\)

Step 6: Write the final solution

\(S(t) = \frac{20000}{(100+2t)^{3/2}}\)

\(S(t) = \frac{20000}{(100+2t)^{3/2}}\) kg of salt at time t minutes
Final answer:

The amount of salt in the tank after t minutes is \(S(t) = \frac{20000}{(100+2t)^{3/2}}\) kg

Applied rules:

• Mass balance: Rate of change equals rate in minus rate out

• Concentration: Amount divided by volume

• Separation of variables: \(\frac{dS}{S} = f(t)dt\)

2 Newton's law of cooling
Exercise 2
A cup of coffee initially at 90°C is placed in a room at 20°C. If the temperature drops to 70°C after 10 minutes, find the temperature after 20 minutes. Use Newton's law of cooling: \(\frac{dT}{dt} = -k(T-T_a)\) where T is temperature, Ta is ambient temperature, and k is a positive constant.
Definition:

Newton's law of cooling: The rate of temperature change of an object is proportional to the difference between its temperature and the ambient temperature: \(\frac{dT}{dt} = -k(T-T_a)\).

Differential Equation
\(\frac{dT}{dt} = -k(T-T_a)\)
Separation
\(\frac{dT}{T-T_a} = -k dt\)
General Solution
\(T(t) = T_a + Ce^{-kt}\)
Step 1: Set up the problem

Given information:

  • Initial temperature: T(0) = 90°C
  • Ambient temperature: T_a = 20°C
  • Temperature at t = 10: T(10) = 70°C
  • Find: T(20) = ?
Step 2: Solve the differential equation

Newton's law: \(\frac{dT}{dt} = -k(T-T_a)\)

Separating variables: \(\frac{dT}{T-T_a} = -k dt\)

Integrating: \(\ln|T-T_a| = -kt + C_1\)

\(T-T_a = e^{C_1}e^{-kt}\)

\(T = T_a + Ce^{-kt}\) where \(C = e^{C_1}\)

Step 3: Apply initial condition

At t = 0: T(0) = 90

\(90 = 20 + Ce^{0} = 20 + C\)

\(C = 70\)

So: \(T(t) = 20 + 70e^{-kt}\)

Step 4: Find the constant k

At t = 10: T(10) = 70

\(70 = 20 + 70e^{-10k}\)

\(50 = 70e^{-10k}\)

\(\frac{50}{70} = e^{-10k}\)

\(\frac{5}{7} = e^{-10k}\)

\(\ln\left(\frac{5}{7}\right) = -10k\)

\(k = -\frac{1}{10}\ln\left(\frac{5}{7}\right) = \frac{1}{10}\ln\left(\frac{7}{5}\right)\)

Step 5: Find temperature after 20 minutes

\(T(20) = 20 + 70e^{-20k}\)

\(T(20) = 20 + 70e^{-20 \cdot \frac{1}{10}\ln\left(\frac{7}{5}\right)}\)

\(T(20) = 20 + 70e^{-2\ln\left(\frac{7}{5}\right)}\)

\(T(20) = 20 + 70e^{\ln\left(\frac{7}{5}\right)^{-2}}\)

\(T(20) = 20 + 70\left(\frac{7}{5}\right)^{-2}\)

\(T(20) = 20 + 70\left(\frac{5}{7}\right)^{2}\)

\(T(20) = 20 + 70 \cdot \frac{25}{49}\)

\(T(20) = 20 + \frac{1750}{49} = 20 + 35.71 = 55.71°C\)

\(T(20) = 55.71°C\)
Final answer:

The temperature of the coffee after 20 minutes is approximately 55.71°C

Applied rules:

• Newton's law of cooling: Rate of cooling proportional to temperature difference

• Separation of variables: Standard method for solving first-order equations

• Logarithmic properties: \(\ln(a/b) = \ln(a) - \ln(b)\) and \(e^{\ln(x)} = x\)

3 RC circuit
Exercise 3
An RC circuit has R = 10Ω and C = 0.1F. If the circuit is connected to a 12V battery with the switch closed at t = 0, find the charge on the capacitor as a function of time. The governing equation is: \(R\frac{dq}{dt} + \frac{q}{C} = E\) where q is charge, R is resistance, C is capacitance, and E is voltage.
Definition:

RC circuit: An electrical circuit with a resistor and capacitor in series, governed by the equation \(R\frac{dq}{dt} + \frac{q}{C} = E\) where q is charge, R is resistance, C is capacitance, and E is applied voltage.

Circuit Equation
\(R\frac{dq}{dt} + \frac{q}{C} = E\)
Standard Form
\(\frac{dq}{dt} + \frac{q}{RC} = \frac{E}{R}\)
Solution
\(q(t) = EC(1 - e^{-t/RC})\)
Step 1: Set up the problem

Given information:

  • R = 10 Ω
  • C = 0.1 F
  • E = 12 V
  • Initial condition: q(0) = 0 (capacitor initially uncharged)

Governing equation: \(R\frac{dq}{dt} + \frac{q}{C} = E\)

Step 2: Write in standard form

\(10\frac{dq}{dt} + \frac{q}{0.1} = 12\)

\(10\frac{dq}{dt} + 10q = 12\)

\(\frac{dq}{dt} + q = 1.2\)

This is a linear first-order equation with P(t) = 1 and Q(t) = 1.2

Step 3: Find the integrating factor

\(\mu(t) = e^{\int 1 dt} = e^t\)

Step 4: Multiply by integrating factor

\(e^t\frac{dq}{dt} + e^t q = 1.2e^t\)

\(\frac{d}{dt}[e^t q] = 1.2e^t\)

Step 5: Integrate both sides

\(\int \frac{d}{dt}[e^t q] dt = \int 1.2e^t dt\)

\(e^t q = 1.2e^t + C\)

\(q = 1.2 + Ce^{-t}\)

Step 6: Apply initial condition

At t = 0: q(0) = 0

\(0 = 1.2 + Ce^{0} = 1.2 + C\)

\(C = -1.2\)

Step 7: Write the final solution

\(q(t) = 1.2 - 1.2e^{-t}\)

\(q(t) = 1.2(1 - e^{-t})\)

Since EC = 12 × 0.1 = 1.2 and RC = 10 × 0.1 = 1, we can write:

\(q(t) = EC(1 - e^{-t/RC})\)

\(q(t) = 1.2(1 - e^{-t})\) coulombs
Final answer:

The charge on the capacitor as a function of time is \(q(t) = 1.2(1 - e^{-t})\) coulombs

Applied rules:

• Kirchhoff's voltage law: Sum of voltage drops equals applied voltage

• Ohm's law: Voltage drop across resistor is IR

• Capacitor relationship: Voltage across capacitor is q/C

Applications: Physical Laws and Mathematical Models
\(\frac{dS}{dt} = \text{rate in} - \text{rate out}\)
Mixing Problem Model
\(\frac{dT}{dt} = -k(T-T_a)\)
Newton's Law of Cooling
\(R\frac{dq}{dt} + \frac{q}{C} = E\)
RC Circuit Model
Key definitions:

Mixing problem: A problem involving the rate of change of concentration in a tank where substances are added and removed at different rates.

Newton's law of cooling: The rate of temperature change is proportional to the difference between object and ambient temperatures.

RC circuit: An electrical circuit with a resistor and capacitor in series, modeling charge accumulation and discharge.

Modeling: The process of translating real-world situations into mathematical equations.

Modeling methodology:
  1. Identify variables: Determine what quantity changes with time
  2. Set up rate equation: Express rate of change as rate in minus rate out
  3. Express rates mathematically: Convert physical descriptions to mathematical expressions
  4. Solve the equation: Use appropriate differential equation methods
  5. Apply initial conditions: Determine constants using known values
  6. Interpret results: Relate mathematical solution back to physical situation
Tip 1: Always draw a diagram to visualize the system and identify inputs and outputs.
Tip 2: For mixing problems, track both volume and amount of substance separately.
Tip 3: In cooling problems, the temperature always approaches ambient temperature exponentially.
Tip 4: For circuits, remember Kirchhoff's voltage law: sum of voltage drops equals applied voltage.
Common errors: Confusing concentrations with amounts, incorrect rate calculations, forgetting units, algebraic mistakes in solving equations.
Physical insight: Solutions typically approach equilibrium values exponentially, with characteristic time constants determined by system parameters.
Essential formulas to know:

• Mixing: \(\frac{dS}{dt} = (\text{conc}_{in})(\text{rate}_{in}) - (\text{conc}_{out})(\text{rate}_{out})\)

• Newton's cooling: \(T(t) = T_a + (T_0 - T_a)e^{-kt}\)

• RC charging: \(q(t) = EC(1 - e^{-t/RC})\)

• RC discharging: \(q(t) = q_0 e^{-t/RC}\)

• Time constant: \(\tau = RC\) for circuits, \(\tau = 1/k\) for cooling

Solution: Exercises 4 to 5
4 Mixing problem with inflow of solution
Exercise 4
A tank contains 50 gallons of brine with 25 pounds of salt. Brine containing 2 pounds of salt per gallon flows into the tank at 3 gal/min, and the well-stirred mixture flows out at 4 gal/min. Find the amount of salt in the tank after t minutes.
Definition:

Mixing problem with concentrated inflow: A mixing problem where the incoming solution has a non-zero concentration of the substance being tracked.

Rate Equation
\(\frac{dS}{dt} = 6 - \frac{4S(t)}{V(t)}\)
Volume
\(V(t) = 50 - t\)
Linear Form
\(\frac{dS}{dt} + \frac{4S}{50-t} = 6\)
Step 1: Set up the problem

Given information:

  • Initial volume: 50 gal
  • Initial salt: 25 lbs
  • Inflow: 3 gal/min of solution with 2 lbs/gal → rate in = 6 lbs/min
  • Outflow: 4 gal/min

Volume at time t: \(V(t) = 50 + (3-4)t = 50 - t\)

Step 2: Write the rate equation

Let S(t) = amount of salt (lbs) at time t

\(\frac{dS}{dt} = \text{rate in} - \text{rate out}\)

Rate in = (2 lbs/gal) × (3 gal/min) = 6 lbs/min

Rate out = (concentration in tank) × (outflow rate) = \(\frac{S(t)}{50-t} \times 4 = \frac{4S(t)}{50-t}\)

Step 3: Formulate the differential equation

\(\frac{dS}{dt} = 6 - \frac{4S(t)}{50-t}\)

\(\frac{dS}{dt} + \frac{4S(t)}{50-t} = 6\)

This is a linear first-order equation with P(t) = \(\frac{4}{50-t}\) and Q(t) = 6

Step 4: Find the integrating factor

\(\mu(t) = e^{\int \frac{4}{50-t} dt} = e^{-4\ln|50-t|} = e^{\ln|50-t|^{-4}} = \frac{1}{(50-t)^4}\)

Step 5: Multiply by integrating factor

\(\frac{1}{(50-t)^4}\frac{dS}{dt} + \frac{4}{(50-t)^5}S = \frac{6}{(50-t)^4}\)

\(\frac{d}{dt}\left[\frac{S}{(50-t)^4}\right] = \frac{6}{(50-t)^4}\)

Step 6: Integrate both sides

\(\int \frac{d}{dt}\left[\frac{S}{(50-t)^4}\right] dt = \int \frac{6}{(50-t)^4} dt\)

\(\frac{S}{(50-t)^4} = 6 \int (50-t)^{-4} dt = 6 \cdot \frac{(50-t)^{-3}}{-3} \cdot (-1) = \frac{2}{(50-t)^3} + C\)

\(\frac{S}{(50-t)^4} = \frac{2}{(50-t)^3} + C\)

\(S = 2(50-t) + C(50-t)^4\)

Step 7: Apply initial condition

At t = 0: S(0) = 25

\(25 = 2(50-0) + C(50-0)^4 = 100 + C \cdot 50^4\)

\(25 = 100 + C \cdot 6250000\)

\(C = \frac{25-100}{6250000} = \frac{-75}{6250000} = -\frac{3}{250000}\)

Step 8: Write the final solution

\(S(t) = 2(50-t) - \frac{3}{250000}(50-t)^4\)

\(S(t) = 2(50-t) - \frac{3(50-t)^4}{250000}\)

\(S(t) = 2(50-t) - \frac{3(50-t)^4}{250000}\) pounds of salt at time t minutes
Final answer:

The amount of salt in the tank after t minutes is \(S(t) = 2(50-t) - \frac{3(50-t)^4}{250000}\) pounds

Applied rules:

• Variable volume: Account for changing volume when flow rates differ

• Integrating factor: \(\mu(t) = e^{\int P(t)dt}\) for linear equations

• Logarithmic integration: \(\int \frac{1}{u}du = \ln|u| + C\)

5 RL circuit
Exercise 5
An RL circuit has R = 5Ω and L = 2H. If the circuit is connected to a 10V battery with the switch closed at t = 0, find the current as a function of time. The governing equation is: \(L\frac{di}{dt} + Ri = E\) where i is current, R is resistance, L is inductance, and E is voltage.
Definition:

RL circuit: An electrical circuit with a resistor and inductor in series, governed by the equation \(L\frac{di}{dt} + Ri = E\) where i is current, R is resistance, L is inductance, and E is applied voltage.

Circuit Equation
\(L\frac{di}{dt} + Ri = E\)
Standard Form
\(\frac{di}{dt} + \frac{R}{L}i = \frac{E}{L}\)
Solution
\(i(t) = \frac{E}{R}(1 - e^{-Rt/L})\)
Step 1: Set up the problem

Given information:

  • R = 5 Ω
  • L = 2 H
  • E = 10 V
  • Initial condition: i(0) = 0 (current starts at zero)

Governing equation: \(L\frac{di}{dt} + Ri = E\)

Step 2: Write in standard form

\(2\frac{di}{dt} + 5i = 10\)

\(\frac{di}{dt} + \frac{5}{2}i = 5\)

This is a linear first-order equation with P(t) = \(\frac{5}{2}\) and Q(t) = 5

Step 3: Find the integrating factor

\(\mu(t) = e^{\int \frac{5}{2} dt} = e^{\frac{5t}{2}}\)

Step 4: Multiply by integrating factor

\(e^{\frac{5t}{2}}\frac{di}{dt} + \frac{5}{2}e^{\frac{5t}{2}}i = 5e^{\frac{5t}{2}}\)

\(\frac{d}{dt}[e^{\frac{5t}{2}}i] = 5e^{\frac{5t}{2}}\)

Step 5: Integrate both sides

\(\int \frac{d}{dt}[e^{\frac{5t}{2}}i] dt = \int 5e^{\frac{5t}{2}} dt\)

\(e^{\frac{5t}{2}}i = 5 \cdot \frac{2}{5}e^{\frac{5t}{2}} + C = 2e^{\frac{5t}{2}} + C\)

\(i = 2 + Ce^{-\frac{5t}{2}}\)

Step 6: Apply initial condition

At t = 0: i(0) = 0

\(0 = 2 + Ce^{0} = 2 + C\)

\(C = -2\)

Step 7: Write the final solution

\(i(t) = 2 - 2e^{-\frac{5t}{2}}\)

\(i(t) = 2(1 - e^{-\frac{5t}{2}})\)

Since E/R = 10/5 = 2 and L/R = 2/5 = 0.4, we can write:

\(i(t) = \frac{E}{R}(1 - e^{-Rt/L})\)

\(i(t) = 2(1 - e^{-2.5t})\) amperes
Final answer:

The current in the circuit as a function of time is \(i(t) = 2(1 - e^{-2.5t})\) amperes

Applied rules:

• Kirchhoff's voltage law: Sum of voltage drops equals applied voltage

• Inductor relationship: Voltage drop is L(di/dt)

• Resistor relationship: Voltage drop is Ri

Advanced Applications and Physical Insights
\(\frac{dS}{dt} = \text{rate in} - \text{rate out}\)
General Rate Equation
Advanced definitions:

Time constant: The characteristic time scale of a system, representing how quickly it approaches equilibrium. For cooling: \(\tau = 1/k\), for RC circuits: \(\tau = RC\), for RL circuits: \(\tau = L/R\).

Equilibrium solution: The steady-state value approached as \(t \to \infty\). For mixing: \(S_{eq} = (\text{rate in})/\text{constant outflow rate}\) when applicable.

Transient response: The part of the solution that decays to zero over time, representing the adjustment period from initial conditions.

Advanced modeling techniques:
  1. Dimensional analysis: Check that all terms in the equation have consistent units
  2. Limiting behavior: Analyze what happens as \(t \to \infty\) to verify physical reasonableness
  3. Special cases: Consider scenarios like infinite time, zero flow rates, or extreme parameter values
  4. Numerical validation: Use computed values at early and late times to verify solutions
Tip 1: For mixing problems, always check that volume approaches a reasonable limit (or continues to change as expected).
Tip 2: In electrical circuits, current starts at its initial value and approaches E/R exponentially.
Tip 3: Temperature in cooling problems always approaches ambient temperature.
Tip 4: The time constant gives the time to reach about 63% of the way from initial to final value.
Physical applications: Chemical engineering, food processing, environmental science, thermal systems, electronic design, and control theory.
Mathematical significance: These problems demonstrate how differential equations model dynamic systems and predict future behavior.
Advanced formulas and properties:

• Mixing with constant volume: \(\frac{dS}{dt} + \frac{F}{V}S = C_{in}F\) has solution \(S(t) = S_0e^{-Ft/V} + C_{in}V(1-e^{-Ft/V})\)

• General cooling: \(T(t) = T_a + (T_0 - T_a)e^{-kt}\)

• RC charging: \(V_C(t) = E(1 - e^{-t/RC})\), \(I(t) = \frac{E}{R}e^{-t/RC}\)

• RC discharging: \(V_C(t) = V_0e^{-t/RC}\), \(I(t) = -\frac{V_0}{R}e^{-t/RC}\)

• RL circuit: \(i(t) = \frac{E}{R}(1 - e^{-Rt/L})\), \(\tau = L/R\)

Applications: Real-World Examples
Application: Population Growth with Limited Resources
Modeling drug concentration in the bloodstream:
\(\frac{dC}{dt} = \frac{D}{V} - kC\) where C is concentration, D is dose rate, V is volume, and k is elimination constant.
This models how medication levels build up and decay in the body over time.

Analysis: The solution shows how concentration approaches a steady-state value determined by the balance between administration and elimination rates.

  • Initial rise: Concentration builds up as administration exceeds elimination
  • Approach to equilibrium: As concentration increases, elimination rate increases
  • Steady state: Administration rate equals elimination rate

Questions & Answers

Question: How do I determine the rate of substance leaving a mixing tank when the outflow rate changes over time? Is the concentration always amount/volume?

Answer: Great question! The rate out depends on the physical setup:

  1. Rate out calculation: Rate out = (concentration in tank) × (outflow rate)
  2. Concentration: Yes, concentration is always (amount of substance)/(total volume) in the tank
  3. Changing outflow: If outflow rate varies with time, say as \(r_{out}(t)\), then: Rate out = \(\frac{S(t)}{V(t)} \times r_{out}(t)\)
  4. Variable volume: Volume changes as: \(\frac{dV}{dt} = r_{in} - r_{out}(t)\)

Example: If outflow rate decreases linearly: \(r_{out}(t) = r_0 - kt\), then Rate out = \(\frac{S(t)}{V(t)} \times (r_0 - kt)\)

Physical assumption: The "well-stirred" condition means concentration is uniform throughout the tank at any instant.

Always define your volume function \(V(t)\) first, then use it consistently in concentration calculations.

Question: What's the physical meaning of the time constant in RC and RL circuits? How does it relate to practical applications?

Answer: The time constant has crucial physical significance:

  • RC circuit: \(\tau = RC\) - time for voltage to reach 63% of final value during charging (or drop to 37% during discharging)
  • RL circuit: \(\tau = L/R\) - time for current to reach 63% of final value
  • Physical interpretation: It measures how quickly the system responds to changes
  • Energy storage: Larger time constants mean slower energy storage/release

Practical implications:

  • Filtering: RC circuits with large \(\tau\) filter out high frequencies
  • Timing: Used in timing circuits and oscillators
  • Protection: RL circuits limit rate of current change in inductive loads
  • Signal processing: Time constants determine bandwidth and response speed

After 5\(\tau\), the system is essentially at steady state (99.3% of final value).

Question: Why do mixing problems often result in linear first-order differential equations? Is there a deeper mathematical reason?

Answer: There are several mathematical reasons why mixing problems lead to linear equations:

  1. Conservation law: Rate of change of amount = rate in - rate out
  2. Linear rate out: Rate out = (concentration) × (flow rate) = \(\frac{S(t)}{V(t)} \times r_{out}\)
  3. Proportionality: The rate of removal is directly proportional to the current amount S(t)
  4. Structure: This creates the form \(\frac{dS}{dt} = \text{constant} - \frac{r_{out}}{V(t)}S(t)\)

Deeper reason: The fundamental assumption is that the system is "well-stirred," meaning local concentration equals global concentration. This linearity arises from the linear relationship between amount and concentration.

Nonlinear extensions: Nonlinear behavior could arise from: - Chemical reactions affecting concentration - Variable flow rates depending on concentration - Adsorption or precipitation effects

The linearity makes these problems analytically solvable and physically interpretable.

Question: What are the limitations of Newton's law of cooling? When does it break down?

Answer: Newton's law of cooling has several important limitations:

  1. Small temperature differences: Most accurate when \(\Delta T = T - T_a\) is small (typically < 30°C)
  2. Convective heat transfer: Assumes convective cooling dominates; fails for radiative cooling at high temperatures
  3. Uniform temperature: Assumes object has uniform temperature (lumped capacitance model)
  4. Constant heat transfer coefficient: Assumes h is constant, but it varies with air movement, surface conditions

Breakdown occurs when:

  • Temperature differences exceed ~50°C (radiation becomes significant)
  • Object is large with significant internal temperature gradients
  • Phase changes occur (melting, boiling)
  • Forced convection conditions change dramatically

More accurate models: For large temperature differences, use the Stefan-Boltzmann law for radiation: \(\frac{dT}{dt} \propto (T^4 - T_a^4)\)

For non-uniform temperature distributions, use the full heat equation with spatial derivatives.