Solved Exercises on Applications of Laplace Transform to Second-Order Equations and Impulses

Master second-order differential equations with Laplace transforms: solving mechanical vibrations, electrical circuits, and impulse responses through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Mechanical vibration
Exercise 1
A mass-spring-damper system is modeled by: \(y'' + 4y' + 3y = 0\) with initial conditions \(y(0) = 2\), \(y'(0) = 1\). Find the displacement y(t) for t > 0.
Definition:

Mass-spring-damper system: A classical mechanical system governed by the differential equation \(my'' + cy' + ky = f(t)\), where m is mass, c is damping coefficient, k is spring constant, and f(t) is external force.

Second-order equation procedure:
  1. Take the Laplace transform of both sides of the differential equation
  2. Apply the transform properties for derivatives: \(\mathcal{L}\{y'\} = sY(s) - y(0)\) and \(\mathcal{L}\{y''\} = s^2Y(s) - sy(0) - y'(0)\)
  3. Substitute initial conditions
  4. Solve the resulting algebraic equation for Y(s)
  5. Use partial fractions if necessary to simplify Y(s)
  6. Apply inverse Laplace transform to find y(t)
Equation
y'' + 4y' + 3y = 0
Laplace Form
(s² + 4s + 3)Y(s) = 2s + 9
Solution
y(t) = (5/2)e^{-t} - (1/2)e^{-3t}
System Parameters
m = 1 (mass), c = 4 (damping), k = 3 (spring constant)
No external force: f(t) = 0
Laplace Transform
\(\mathcal{L}\{y''\} = s^2Y(s) - sy(0) - y'(0)\)
\(\mathcal{L}\{y'\} = sY(s) - y(0)\)
Step 1: Apply the Laplace transform to the equation

\(\mathcal{L}\{y'' + 4y' + 3y\} = \mathcal{L}\{0\}\)

\(\mathcal{L}\{y''\} + 4\mathcal{L}\{y'\} + 3\mathcal{L}\{y\} = 0\)

Step 2: Apply derivative properties with initial conditions

Let \(\mathcal{L}\{y\} = Y(s)\)

\(\mathcal{L}\{y''\} = s^2Y(s) - sy(0) - y'(0) = s^2Y(s) - s(2) - 1 = s^2Y(s) - 2s - 1\)

\(\mathcal{L}\{y'\} = sY(s) - y(0) = sY(s) - 2\)

Substituting: \((s^2Y(s) - 2s - 1) + 4(sY(s) - 2) + 3Y(s) = 0\)

Step 3: Simplify and solve for Y(s)

\(s^2Y(s) - 2s - 1 + 4sY(s) - 8 + 3Y(s) = 0\)

\(Y(s)(s^2 + 4s + 3) - 2s - 9 = 0\)

\(Y(s)(s^2 + 4s + 3) = 2s + 9\)

\(Y(s) = \frac{2s + 9}{s^2 + 4s + 3}\)

Step 4: Factor the denominator

\(s^2 + 4s + 3 = (s + 1)(s + 3)\)

So: \(Y(s) = \frac{2s + 9}{(s + 1)(s + 3)}\)

Step 5: Apply partial fraction decomposition

\(\frac{2s + 9}{(s + 1)(s + 3)} = \frac{A}{s + 1} + \frac{B}{s + 3}\)

\(2s + 9 = A(s + 3) + B(s + 1)\)

Setting \(s = -1\): \(2(-1) + 9 = 7 = A(2)\), so \(A = \frac{7}{2}\)

Setting \(s = -3\): \(2(-3) + 9 = 3 = B(-2)\), so \(B = -\frac{3}{2}\)

Step 6: Write the solution in partial fraction form

\(Y(s) = \frac{7/2}{s + 1} + \frac{-3/2}{s + 3} = \frac{7}{2} \cdot \frac{1}{s + 1} - \frac{3}{2} \cdot \frac{1}{s + 3}\)

Step 7: Apply inverse Laplace transform

\(y(t) = \mathcal{L}^{-1}\left\{\frac{7}{2} \cdot \frac{1}{s + 1}\right\} - \mathcal{L}^{-1}\left\{\frac{3}{2} \cdot \frac{1}{s + 3}\right\}\)

\(y(t) = \frac{7}{2}e^{-t} - \frac{3}{2}e^{-3t}\)

\(y(t) = \frac{7}{2}e^{-t} - \frac{3}{2}e^{-3t}\)
Final answer:

The displacement is \(y(t) = \frac{7}{2}e^{-t} - \frac{3}{2}e^{-3t}\). The system is overdamped with both exponential terms decaying to zero, representing a return to equilibrium without oscillation.

Applied rules:

• Derivative property: \(\mathcal{L}\{y''\} = s^2Y(s) - sy(0) - y'(0)\)

• Exponential transform: \(\mathcal{L}^{-1}\left\{\frac{1}{s+a}\right\} = e^{-at}\)

• Partial fractions: Decompose complex rational functions for inverse transformation

2 RLC circuit analysis
Exercise 2
An RLC circuit has R = 6Ω, L = 1H, C = 1/8F. If the circuit is initially uncharged and a 12V battery is switched on at t = 0, find the charge q(t) and current i(t) for t > 0.
Definition:

RLC circuit equation: The governing equation for an RLC series circuit is \(Lq'' + Rq' + \frac{1}{C}q = E(t)\), where q is charge, i = q' is current, and E(t) is the applied voltage.

Circuit Equation
q'' + 6q' + 8q = 12
Initial Conditions
q(0) = 0, q'(0) = 0
Solution
q(t) = (3/2)(1 - e^{-2t} - e^{-4t}), i(t) = 3(e^{-2t} + e^{-4t})
Circuit Parameters
L = 1H, R = 6Ω, C = 1/8F
1/C = 8
Differential Equation
\(q'' + 6q' + 8q = 12\)
Initial: q(0) = 0, i(0) = 0
Step 1: Set up the circuit differential equation

The RLC circuit equation is: \(Lq'' + Rq' + \frac{1}{C}q = E(t)\)

Substituting values: \(1 \cdot q'' + 6 \cdot q' + \frac{1}{1/8}q = 12\)

This simplifies to: \(q'' + 6q' + 8q = 12\)

Step 2: Apply initial conditions

Initially uncharged: \(q(0) = 0\)

No initial current: \(q'(0) = 0\)

Step 3: Take the Laplace transform

\(\mathcal{L}\{q'' + 6q' + 8q\} = \mathcal{L}\{12\}\)

\(\mathcal{L}\{q''\} + 6\mathcal{L}\{q'\} + 8\mathcal{L}\{q\} = \frac{12}{s}\)

Step 4: Apply derivative properties

Let \(\mathcal{L}\{q\} = Q(s)\)

\(\mathcal{L}\{q''\} = s^2Q(s) - sq(0) - q'(0) = s^2Q(s) - 0 - 0 = s^2Q(s)\)

\(\mathcal{L}\{q'\} = sQ(s) - q(0) = sQ(s) - 0 = sQ(s)\)

Substituting: \(s^2Q(s) + 6sQ(s) + 8Q(s) = \frac{12}{s}\)

Step 5: Solve for Q(s)

\(Q(s)(s^2 + 6s + 8) = \frac{12}{s}\)

\(Q(s) = \frac{12}{s(s^2 + 6s + 8)}\)

Factor the quadratic: \(s^2 + 6s + 8 = (s + 2)(s + 4)\)

So: \(Q(s) = \frac{12}{s(s + 2)(s + 4)}\)

Step 6: Apply partial fraction decomposition

\(\frac{12}{s(s + 2)(s + 4)} = \frac{A}{s} + \frac{B}{s + 2} + \frac{C}{s + 4}\)

\(12 = A(s + 2)(s + 4) + Bs(s + 4) + Cs(s + 2)\)

Setting \(s = 0\): \(12 = A(2)(4) = 8A\), so \(A = \frac{3}{2}\)

Setting \(s = -2\): \(12 = A(0) + B(-2)(2) + C(0) = -4B\), so \(B = -3\)

Setting \(s = -4\): \(12 = A(0) + B(0) + C(-4)(-2) = 8C\), so \(C = \frac{3}{2}\)

Step 7: Write the partial fraction form

\(Q(s) = \frac{3/2}{s} + \frac{-3}{s + 2} + \frac{3/2}{s + 4} = \frac{3}{2} \cdot \frac{1}{s} - 3 \cdot \frac{1}{s + 2} + \frac{3}{2} \cdot \frac{1}{s + 4}\)

Step 8: Apply inverse Laplace transform

\(q(t) = \mathcal{L}^{-1}\left\{\frac{3}{2} \cdot \frac{1}{s}\right\} - \mathcal{L}^{-1}\left\{3 \cdot \frac{1}{s + 2}\right\} + \mathcal{L}^{-1}\left\{\frac{3}{2} \cdot \frac{1}{s + 4}\right\}\)

\(q(t) = \frac{3}{2} - 3e^{-2t} + \frac{3}{2}e^{-4t}\)

Step 9: Find the current i(t) = q'(t)

\(i(t) = q'(t) = \frac{d}{dt}\left[\frac{3}{2} - 3e^{-2t} + \frac{3}{2}e^{-4t}\right]\)

\(i(t) = 0 - 3(-2)e^{-2t} + \frac{3}{2}(-4)e^{-4t}\)

\(i(t) = 6e^{-2t} - 6e^{-4t} = 6(e^{-2t} - e^{-4t})\)

\(q(t) = \frac{3}{2}(1 - 2e^{-2t} + e^{-4t})\), \(i(t) = 6(e^{-2t} - e^{-4t})\)
Final answer:

The charge is \(q(t) = \frac{3}{2}(1 - 2e^{-2t} + e^{-4t})\) and the current is \(i(t) = 6(e^{-2t} - e^{-4t})\). Both approach steady-state values as t → ∞.

Applied rules:

• RLC equation: Derived from Kirchhoff's voltage law

• Current relation: Current is the derivative of charge: \(i = \frac{dq}{dt}\)

• Overdamped response: Both exponentials decay, no oscillation occurs

3 Forced oscillation with impulse
Exercise 3
Solve: \(y'' + 4y = \delta(t-2)\) with \(y(0) = 0\), \(y'(0) = 0\). This represents a harmonic oscillator receiving an impulse at t = 2.
Definition:

Harmonic oscillator with impulse: A system described by \(y'' + \omega^2 y = f(t)\) where f(t) includes a Dirac delta function, modeling an instantaneous force applied at a specific time.

Equation
y'' + 4y = δ(t-2)
Laplace Form
(s² + 4)Y(s) = e^{-2s}
Solution
y(t) = (1/2)u_2(t)sin(2(t-2))
Step 1: Apply the Laplace transform to the equation

\(\mathcal{L}\{y'' + 4y\} = \mathcal{L}\{\delta(t-2)\}\)

\(\mathcal{L}\{y''\} + 4\mathcal{L}\{y\} = \mathcal{L}\{\delta(t-2)\}\)

Step 2: Apply transform properties with initial conditions

Let \(\mathcal{L}\{y\} = Y(s)\)

\(\mathcal{L}\{y''\} = s^2Y(s) - sy(0) - y'(0) = s^2Y(s) - 0 - 0 = s^2Y(s)\)

\(\mathcal{L}\{\delta(t-2)\} = e^{-2s}\) (by the property of the Dirac delta function)

Substituting: \(s^2Y(s) + 4Y(s) = e^{-2s}\)

Step 3: Solve for Y(s)

\(Y(s)(s^2 + 4) = e^{-2s}\)

\(Y(s) = \frac{e^{-2s}}{s^2 + 4}\)

Step 4: Apply the time-shift property

The time-shift property states: \(\mathcal{L}^{-1}\{e^{-as}F(s)\} = u_a(t)f(t-a)\)

Here: \(F(s) = \frac{1}{s^2 + 4}\) and \(a = 2\)

We know: \(\mathcal{L}^{-1}\left\{\frac{1}{s^2 + 4}\right\} = \frac{1}{2}\sin(2t)\)

Step 5: Apply the inverse transform

\(y(t) = \mathcal{L}^{-1}\left\{e^{-2s} \cdot \frac{1}{s^2 + 4}\right\}\)

\(y(t) = u_2(t) \cdot \frac{1}{2}\sin(2(t-2))\)

\(y(t) = \frac{1}{2}u_2(t)\sin(2(t-2))\)

Step 6: Express as a piecewise function

\(y(t) = \begin{cases} 0 & \text{if } t < 2 \\ \frac{1}{2}\sin(2(t-2)) & \text{if } t \geq 2 \end{cases}\)

\(y(t) = \frac{1}{2}u_2(t)\sin(2(t-2))\)
Final answer:

The solution is \(y(t) = \frac{1}{2}u_2(t)\sin(2(t-2))\). The oscillator remains at rest until t = 2, when the impulse initiates sinusoidal motion with amplitude 1/2 and frequency 2.

Applied rules:

• Delta function property: \(\mathcal{L}\{\delta(t-a)\} = e^{-as}\)

• Time-shift property: Handles delayed responses in the system

• Impulse effect: Instantaneous change in velocity, not position

Rules and methods, laws,...
\(\mathcal{L}\{y''\} = s^2Y(s) - sy(0) - y'(0), \quad \mathcal{L}\{\delta(t-c)\} = e^{-cs}\)
Second-Order Transform Properties and Impulse Transform
Second Derivative
\(\mathcal{L}\{y''\} = s^2Y(s) - sy(0) - y'(0)\)
Uses both initial conditions
First Derivative
\(\mathcal{L}\{y'\} = sY(s) - y(0)\)
Uses initial value
Dirac Delta
\(\mathcal{L}\{\delta(t-c)\} = e^{-cs}\)
Impulse at time c
Key definitions:

Second-order differential equation: An equation involving the second derivative of the unknown function, typically representing systems with acceleration.

Initial value problem (IVP): A differential equation with specified initial conditions for the function and its first derivative.

Impulse response: The output of a system when subjected to a Dirac delta input, which represents an instantaneous input of unit strength.

Harmonic oscillator: A system described by \(y'' + \omega^2 y = f(t)\), which exhibits sinusoidal behavior when undamped.

Transfer function: The ratio of output to input in the s-domain, obtained by transforming the differential equation.

Complete methodology:
  1. Transform the equation: Apply \(\mathcal{L}\) to both sides of the differential equation
  2. Apply derivative properties: Use \(\mathcal{L}\{y'\} = sY(s) - y(0)\) and \(\mathcal{L}\{y''\} = s^2Y(s) - sy(0) - y'(0)\)
  3. Substitute initial conditions: Replace y(0) and y'(0) with given values
  4. Solve algebraically: Isolate Y(s) on one side of the equation
  5. Simplify: Use partial fractions or other techniques to prepare for inverse transform
  6. Apply inverse transform: Use \(\mathcal{L}^{-1}\) to find y(t)
Tip 1: Always write down initial conditions clearly before applying the transform.
Tip 2: The Laplace transform automatically incorporates initial conditions into the transformed equation.
Tip 3: For complex denominators, partial fractions are often necessary before taking the inverse transform.
Tip 4: Impulses cause jumps in the first derivative, not the function value itself.
Common errors: Forgetting to include initial conditions in the transform, incorrect partial fraction decomposition, misapplying the time-shift property for impulses.
Applications: Mechanical vibrations, electrical circuits, control systems, signal processing, and structural analysis.
Formulas to know by heart:

• \(\mathcal{L}\{y''\} = s^2Y(s) - sy(0) - y'(0)\)

• \(\mathcal{L}\{y'\} = sY(s) - y(0)\)

• \(\mathcal{L}\{y\} = Y(s)\)

• \(\mathcal{L}\{\delta(t-c)\} = e^{-cs}\)

• \(\mathcal{L}^{-1}\{e^{-cs}F(s)\} = u_c(t)f(t-c)\)

• \(\mathcal{L}\{\sin(\omega t)\} = \frac{\omega}{s^2 + \omega^2}\)

• \(\mathcal{L}\{\cos(\omega t)\} = \frac{s}{s^2 + \omega^2}\)

Solution: Exercises 4 to 5
4 Resonance phenomenon
Exercise 4
A mass-spring system with m = 1, k = 4 is subject to an external force \(f(t) = 3\cos(2t)\). Find the position y(t) if y(0) = 1, y'(0) = 0. Note that the forcing frequency matches the natural frequency.
Definition:

Resonance: A phenomenon that occurs when the frequency of the external forcing function matches the natural frequency of the system, leading to unbounded growth in the response amplitude.

Equation
y'' + 4y = 3cos(2t)
Natural Freq.
ω₀ = 2 (matches forcing)
Solution
y(t) = cos(2t) + (3/4)t sin(2t)
Step 1: Identify the differential equation and parameters

The equation is: \(y'' + 4y = 3\cos(2t)\)

This is a forced harmonic oscillator with natural frequency \(\omega_0 = \sqrt{4} = 2\)

The forcing function has frequency \(\omega = 2\), so \(\omega = \omega_0\) (resonance condition)

Step 2: Apply the Laplace transform

\(\mathcal{L}\{y'' + 4y\} = \mathcal{L}\{3\cos(2t)\}\)

\(\mathcal{L}\{y''\} + 4\mathcal{L}\{y\} = 3\mathcal{L}\{\cos(2t)\}\)

Step 3: Apply derivative properties with initial conditions

Let \(\mathcal{L}\{y\} = Y(s)\)

\(\mathcal{L}\{y''\} = s^2Y(s) - sy(0) - y'(0) = s^2Y(s) - s(1) - 0 = s^2Y(s) - s

\(\mathcal{L}\{\cos(2t)\} = \frac{s}{s^2 + 4}\)

Substituting: \((s^2Y(s) - s) + 4Y(s) = 3 \cdot \frac{s}{s^2 + 4}\)

Step 4: Solve for Y(s)

\(Y(s)(s^2 + 4) - s = \frac{3s}{s^2 + 4}\)

\(Y(s)(s^2 + 4) = s + \frac{3s}{s^2 + 4}\)

\(Y(s) = \frac{s}{s^2 + 4} + \frac{3s}{(s^2 + 4)^2}\)

Step 5: Apply inverse Laplace transform

The first term is straightforward: \(\mathcal{L}^{-1}\left\{\frac{s}{s^2 + 4}\right\} = \cos(2t)\)

For the second term, we use the property: \(\mathcal{L}^{-1}\left\{\frac{s}{(s^2 + \omega^2)^2}\right\} = \frac{t}{2\omega}\sin(\omega t)\)

With \(\omega = 2\): \(\mathcal{L}^{-1}\left\{\frac{s}{(s^2 + 4)^2}\right\} = \frac{t}{4}\sin(2t)\)

Step 6: Combine the results

\(y(t) = \cos(2t) + 3 \cdot \frac{t}{4}\sin(2t)\)

\(y(t) = \cos(2t) + \frac{3t}{4}\sin(2t)\)

Step 7: Analyze the solution

The solution consists of two parts:

  • \(\cos(2t)\): The natural oscillation at the system's frequency
  • \(\frac{3t}{4}\sin(2t)\): The resonant response that grows linearly with time

Since the coefficient of the resonant term is positive, the amplitude grows without bound as t increases.

\(y(t) = \cos(2t) + \frac{3t}{4}\sin(2t)\)
Final answer:

The position is \(y(t) = \cos(2t) + \frac{3t}{4}\sin(2t)\). The system exhibits resonance because the forcing frequency matches the natural frequency, causing the amplitude to grow linearly over time.

Applied rules:

• Resonance condition: Occurs when forcing frequency equals natural frequency

• Resonant solution: Contains terms with growing amplitude (resonant factor t)

• Amplitude growth: Linear growth in resonant case, bounded for non-resonant forcing

5 System with multiple impulses
Exercise 5
Solve: \(y'' + y = \delta(t-1) - \delta(t-3)\) with \(y(0) = 0\), \(y'(0) = 0\). This represents a system receiving positive and negative impulses at different times.
Definition:

Multiple impulses: A system subjected to several instantaneous forces at different times. The response is the sum of individual impulse responses, demonstrating the linear superposition principle.

Equation
y'' + y = δ(t-1) - δ(t-3)
Laplace Form
(s² + 1)Y(s) = e^{-s} - e^{-3s}
Solution
y(t) = u_1(t)sin(t-1) - u_3(t)sin(t-3)
Step 1: Apply the Laplace transform

\(\mathcal{L}\{y'' + y\} = \mathcal{L}\{\delta(t-1) - \delta(t-3)\}\)

\(\mathcal{L}\{y''\} + \mathcal{L}\{y\} = \mathcal{L}\{\delta(t-1)\} - \mathcal{L}\{\delta(t-3)\}\)

Step 2: Apply transform properties with initial conditions

Let \(\mathcal{L}\{y\} = Y(s)\)

\(\mathcal{L}\{y''\} = s^2Y(s) - sy(0) - y'(0) = s^2Y(s) - 0 - 0 = s^2Y(s)\)

\(\mathcal{L}\{\delta(t-1)\} = e^{-s}\) and \(\mathcal{L}\{\delta(t-3)\} = e^{-3s}\)

Substituting: \(s^2Y(s) + Y(s) = e^{-s} - e^{-3s}\)

Step 3: Solve for Y(s)

\(Y(s)(s^2 + 1) = e^{-s} - e^{-3s}\)

\(Y(s) = \frac{e^{-s}}{s^2 + 1} - \frac{e^{-3s}}{s^2 + 1}\)

Step 4: Apply inverse Laplace transform to each term

For the first term: \(\mathcal{L}^{-1}\left\{\frac{e^{-s}}{s^2 + 1}\right\}\)

Using the time-shift property with \(F(s) = \frac{1}{s^2 + 1}\) and \(a = 1\):

\(\mathcal{L}^{-1}\left\{\frac{1}{s^2 + 1}\right\} = \sin(t)\)

So: \(\mathcal{L}^{-1}\left\{\frac{e^{-s}}{s^2 + 1}\right\} = u_1(t)\sin(t-1)\)

Step 5: Apply inverse transform to the second term

For the second term: \(\mathcal{L}^{-1}\left\{\frac{e^{-3s}}{s^2 + 1}\right\}\)

Using the time-shift property with \(F(s) = \frac{1}{s^2 + 1}\) and \(a = 3\):

\(\mathcal{L}^{-1}\left\{\frac{e^{-3s}}{s^2 + 1}\right\} = u_3(t)\sin(t-3)\)

Step 6: Combine the results using linearity

\(y(t) = \mathcal{L}^{-1}\left\{\frac{e^{-s}}{s^2 + 1}\right\} - \mathcal{L}^{-1}\left\{\frac{e^{-3s}}{s^2 + 1}\right\}\)

\(y(t) = u_1(t)\sin(t-1) - u_3(t)\sin(t-3)\)

Step 7: Express as a piecewise function

\(y(t) = \begin{cases} 0 & \text{if } t < 1 \\ \sin(t-1) & \text{if } 1 \leq t < 3 \\ \sin(t-1) - \sin(t-3) & \text{if } t \geq 3 \end{cases}\)

For \(t \geq 3\), we can simplify using the sine addition formula:

\(\sin(t-1) - \sin(t-3) = \sin(t-1) - \sin((t-1)-2) = \sin(t-1) - [\sin(t-1)\cos(2) - \cos(t-1)\sin(2)]\)

\(= \sin(t-1)[1 - \cos(2)] + \cos(t-1)\sin(2)\)

\(y(t) = u_1(t)\sin(t-1) - u_3(t)\sin(t-3)\)
Final answer:

The solution is \(y(t) = u_1(t)\sin(t-1) - u_3(t)\sin(t-3)\). At t = 1, a positive impulse initiates sinusoidal motion. At t = 3, a negative impulse of equal strength modifies the ongoing motion.

Applied rules:

• Linearity: Responses to multiple inputs add linearly

• Time-shift property: Each impulse contributes a delayed response

• Superposition: Total response is sum of individual impulse responses

Key Concepts: Laplace Transform of Derivatives, Impulse Response, System Analysis
\(\mathcal{L}\{f''(t)\} = s^2F(s) - sf(0) - f'(0), \quad \mathcal{L}\{\delta(t-c)\} = e^{-cs}\)
Transform Properties for Second-Order Equations and Impulses
Key definitions:

Second-order differential equation: An equation of the form \(ay'' + by' + cy = f(t)\) that describes systems with acceleration-dependent forces.

Impulse function: The Dirac delta function \(\delta(t-c)\) represents an instantaneous input of unit strength at time t = c.

Transfer function: The ratio of output transform to input transform for a linear system: \(H(s) = \frac{Y(s)}{F(s)}\).

Impulse response: The output of a system when the input is a Dirac delta function, denoted h(t) where \(\mathcal{L}\{h(t)\} = H(s)\).

Convolution: The operation \((f * g)(t) = \int_0^t f(\tau)g(t-\tau)d\tau\) that represents system response to arbitrary inputs.

Complete methodology:
  1. Transform the equation: Apply \(\mathcal{L}\) to both sides of the differential equation
  2. Apply derivative properties: Use formulas for \(\mathcal{L}\{y'\}\) and \(\mathcal{L}\{y''\}\) incorporating initial conditions
  3. Substitute initial values: Replace y(0) and y'(0) with given numbers
  4. Solve algebraically: Isolate Y(s) to find the solution in the s-domain
  5. Simplify if necessary: Use partial fractions or other algebraic techniques
  6. Invert the transform: Apply \(\mathcal{L}^{-1}\) to obtain y(t)
  7. Verify solution: Check that the solution satisfies the original equation and initial conditions
Tip 1: For second-order equations, both initial conditions (position and velocity) are required to fully specify the solution.
Tip 2: Impulses cause instantaneous changes in the first derivative, not the function value itself.
Tip 3: When the forcing frequency matches the natural frequency, resonance occurs with unbounded amplitude growth.
Tip 4: The characteristic equation of the homogeneous equation determines the system's natural behavior.
Common applications: Mechanical vibrations, electrical circuits, structural analysis, control systems, and signal processing.
Physical interpretation: The Laplace transform converts differential equations into algebraic equations, making them easier to solve.
Essential formulas and concepts:

• \(\mathcal{L}\{y''\} = s^2Y(s) - sy(0) - y'(0)\)

• \(\mathcal{L}\{y'\} = sY(s) - y(0)\)

• \(\mathcal{L}\{\delta(t-c)\} = e^{-cs}\)

• \(\mathcal{L}^{-1}\{e^{-cs}F(s)\} = u_c(t)f(t-c)\)

• \(\mathcal{L}\{\sin(\omega t)\} = \frac{\omega}{s^2 + \omega^2}\)

• \(\mathcal{L}\{\cos(\omega t)\} = \frac{s}{s^2 + \omega^2}\)

• Resonance occurs when forcing frequency equals natural frequency: \(\omega = \sqrt{k/m}\)

Questions & Answers

Question: How do I determine if a system will exhibit resonance? What conditions must be met?

Answer: Resonance occurs in a linear system when the frequency of the external forcing function matches one of the system's natural frequencies.

Conditions for resonance:

  • The system must be modeled by a linear differential equation
  • The forcing function must be sinusoidal: \(f(t) = A\cos(\omega t)\) or \(A\sin(\omega t)\)
  • The forcing frequency \(\omega\) must equal a natural frequency \(\omega_0\) of the system

For a second-order equation \(ay'' + by' + cy = A\cos(\omega t)\), the natural frequency is \(\omega_0 = \sqrt{\frac{c}{a}}\) (assuming no damping, i.e., b = 0).

When resonance occurs, the particular solution contains terms with factors of t, leading to unbounded growth in the amplitude over time. This is physically unrealistic for real systems due to energy losses, but represents the mathematical idealization.

Question: What's the difference between the effect of a step input and an impulse input on a system?

Answer: The key differences are:

Step input (u_c(t)):

  • Represents a constant input that "turns on" at time t = c
  • Models turning on a power source, switching a circuit, or activating a controller
  • Causes the system to transition to a new steady-state condition
  • The response typically grows to a new equilibrium value

Impulse input (δ(t-c)):

  • Represents an instantaneous input of infinite magnitude but zero duration
  • Models a hammer blow, electrical spike, or instantaneous shock
  • Does not change the system's value but changes its rate of change
  • The response shows how the system recovers from the instantaneous disturbance

The impulse response is the derivative of the step response, and vice versa. The impulse response characterizes the system's behavior completely.

Question: How do initial conditions affect the solution when using Laplace transforms?

Answer: Initial conditions are automatically incorporated into the transformed equation:

For first derivatives: \(\mathcal{L}\{y'\} = sY(s) - y(0)\)

The initial value y(0) appears directly in the transformed equation.

For second derivatives: \(\mathcal{L}\{y''\} = s^2Y(s) - sy(0) - y'(0)\)

Both the initial position y(0) and initial velocity y'(0) appear in the transformed equation.

This is a major advantage of the Laplace transform method: it directly handles initial conditions without needing to solve for arbitrary constants after finding the general solution. The transformed equation already contains the specific solution that satisfies the given initial conditions.

The initial conditions determine the "starting point" in the s-domain and influence how the solution behaves over time in the t-domain.