Solved Exercises on Area of Rectangles and Parallelograms

Master area of rectangles and parallelograms: using base and height, finding missing dimensions, and comparing areas with these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Rectangle area
Exercise 1
Find the area of a rectangle with length 12 cm and width 8 cm.
Definition:

Rectangle: A quadrilateral with four right angles. Area Formula: A = length × width or A = l × w.

Method:
  1. Identify the length and width of the rectangle
  2. Apply the area formula: A = l × w
  3. Multiply the length by the width
  4. Express the answer in square units
Dimensions
l=12, w=8
Formula
A = l × w
Result
A = 96 cm²
Step 1: Identify the dimensions

Length (l) = 12 cm

Width (w) = 8 cm

Step 2: Apply the rectangle area formula

Area = Length × Width

Area = 12 × 8

Step 3: Calculate the product

Area = 96 square centimeters

Area = 96 cm²
Final answer:

The area of the rectangle is 96 cm².

Applied rules:

• Rectangle Area: A = l × w

• Square Units: Area is measured in square units

• Multiplication: Multiply length by width

2 Parallelogram area
Exercise 2
Find the area of a parallelogram with base 10 inches and height 6 inches.
Definition:

Parallelogram: A quadrilateral with opposite sides parallel and equal in length. Area Formula: A = base × height or A = b × h.

Dimensions
b=10, h=6
Formula
A = b × h
Result
A = 60 in²
Step 1: Identify the base and height

Base (b) = 10 inches

Height (h) = 6 inches (the perpendicular distance from base to opposite side)

Step 2: Apply the parallelogram area formula

Area = Base × Height

Area = 10 × 6

Step 3: Calculate the product

Area = 60 square inches

Step 4: Verify the height is perpendicular

The height must be measured perpendicular to the base

Area = 60 in²
Final answer:

The area of the parallelogram is 60 in².

Applied rules:

• Parallelogram Area: A = b × h

• Perpendicular Height: Height must be perpendicular to base

• Square Units: Area is measured in square units

3 Finding missing dimension
Exercise 3
A parallelogram has an area of 48 square feet and a height of 8 feet. Find the length of its base.
Definition:

Area Formula Manipulation: The area formula A = b × h can be rearranged to solve for any variable when the other two are known: b = A/h or h = A/b.

Given
A=48, h=8
Formula
b = A/h
Result
b = 6 ft
Step 1: Identify known values

Area (A) = 48 square feet

Height (h) = 8 feet

Base (b) = ? (unknown)

Step 2: Start with the area formula

A = b × h

48 = b × 8

Step 3: Solve for the unknown base

To isolate b, divide both sides by h

b = A ÷ h

b = 48 ÷ 8

Step 4: Calculate the result

b = 6 feet

Step 5: Verify the answer

Check: A = b × h = 6 × 8 = 48 ✓

Base = 6 feet
Final answer:

The base of the parallelogram is 6 feet.

Applied rules:

• Formula Rearrangement: A = b × h → b = A/h

• Algebra: Divide both sides to isolate variable

• Verification: Check answer by substitution

Rules and methods, laws,...
\(A = b \times h\)
General Area Formula
Rectangle
\(A = l \times w\)
Length times width
Parallelogram
\(A = b \times h\)
Base times perpendicular height
Derived Formulas
\(b = \frac{A}{h}, h = \frac{A}{b}\)
Find missing dimensions
Key definitions:

Area: The amount of space inside a two-dimensional shape, measured in square units.

Rectangle: A quadrilateral with four right angles and opposite sides equal.

Parallelogram: A quadrilateral with opposite sides parallel and equal in length.

Base: The bottom side of a parallelogram used for area calculation.

Height: The perpendicular distance from the base to the opposite side.

Complete methodology:
  1. Identify the shape: Determine if it's a rectangle or parallelogram
  2. Identify dimensions: Locate base and height (or length and width)
  3. Select appropriate formula: A = l × w for rectangles, A = b × h for parallelograms
  4. Substitute values: Replace variables with known measurements
  5. Perform calculations: Multiply base by height
  6. Express answer: Include proper square units
Important Properties: Area is always measured in square units. Height must be perpendicular to the base.
Measurement Units: Area units are square versions of linear units (cm², m², ft², etc.).
Formulas to know by heart:

• Rectangle Area: A = l × w

• Parallelogram Area: A = b × h

• Missing Base: b = A/h

• Missing Height: h = A/b

Solution: Exercises 4 to 5
4 Comparing areas
Exercise 4
A rectangle has dimensions 15 cm by 8 cm. A parallelogram has a base of 12 cm and a height of 10 cm. Which shape has the larger area and by how much?
Definition:

Area Comparison: Calculating the area of multiple shapes and comparing the results to determine which is larger and by what difference.

Rectangle
A = 15×8 = 120
Parallelogram
A = 12×10 = 120
Comparison
Equal areas
Step 1: Calculate the rectangle's area

Rectangle Area = Length × Width

A_rectangle = 15 × 8 = 120 cm²

Step 2: Calculate the parallelogram's area

Parallelogram Area = Base × Height

A_parallelogram = 12 × 10 = 120 cm²

Step 3: Compare the areas

A_rectangle = 120 cm²

A_parallelogram = 120 cm²

120 = 120

Step 4: Determine the difference

Difference = |120 - 120| = 0 cm²

Step 5: Draw conclusion

Both shapes have equal areas of 120 cm²

Both areas equal 120 cm² (no difference)
Final answer:

Both shapes have equal areas of 120 cm². Neither shape has a larger area.

Applied rules:

• Area Calculation: Apply appropriate formula to each shape

• Comparison: Compare numerical results

• Difference: Calculate absolute difference between areas

5 Real-world application
Exercise 5
A gardener wants to plant flowers in a rectangular plot that is 18 feet long and 12 feet wide. If each flower requires 2 square feet of space, how many flowers can be planted?
Definition:

Real-world Application: Using area calculations to solve practical problems involving coverage, distribution, or capacity.

Plot area
18×12 = 216 ft²
Space per flower
2 ft²
Flowers
216÷2 = 108
Step 1: Calculate the area of the rectangular plot

Plot Area = Length × Width

Area = 18 × 12 = 216 square feet

Step 2: Identify space requirement per flower

Each flower needs 2 square feet

Step 3: Calculate how many flowers fit in the plot

Number of flowers = Total area ÷ Area per flower

Number of flowers = 216 ÷ 2 = 108 flowers

Step 4: Verify the calculation

Check: 108 flowers × 2 ft²/flower = 216 ft² ✓

Step 5: Consider practical constraints

In reality, some space might be needed for pathways or spacing, but mathematically 108 flowers fit

108 flowers can be planted
Final answer:

The gardener can plant 108 flowers in the rectangular plot.

Applied rules:

• Area Calculation: Find total available area

• Division: Divide total area by space requirement per item

• Real-world Context: Apply mathematical results to practical situations

Comprehensive Summary: Area of Rectangles and Parallelograms
\(A = b \times h\)
Fundamental Formula
Key Definitions:

Area: The measure of the surface enclosed by a two-dimensional shape, expressed in square units.

Rectangle: A quadrilateral with four right angles (90°) and opposite sides equal and parallel.

Parallelogram: A quadrilateral with opposite sides parallel and equal in length, opposite angles equal.

Base: The side of a parallelogram that is used as a reference for measuring height.

Height: The perpendicular distance from the base to the opposite parallel side.

Core Methods and Procedures:
  1. Shape Identification: Determine whether the figure is a rectangle or parallelogram
  2. Dimension Measurement: Identify base and height (or length and width)
  3. Formula Selection: Use A = l × w for rectangles, A = b × h for parallelograms
  4. Unit Consistency: Ensure all measurements are in the same units
  5. Calculation: Multiply base by height (or length by width)
  6. Expression: State the answer in appropriate square units
Tip 1: Always ensure the height is measured perpendicular to the base in parallelograms.
Tip 2: Remember that area is always expressed in square units (cm², m², ft², etc.).
Tip 3: The area of a parallelogram is the same as a rectangle with the same base and height.
Tip 4: You can rearrange area formulas to find missing dimensions: b = A/h, h = A/b.
Tip 5: When comparing areas, make sure units are consistent before calculating.
Common Mistakes: Using slanted height instead of perpendicular height, forgetting square units, confusing area with perimeter.
Exam Preparation: Memorize both area formulas, practice finding missing dimensions, work on real-world applications.
Essential Rules and Laws:

• Rectangle Area: A = l × w

• Parallelogram Area: A = b × h

• Height Requirement: Must be perpendicular to the base

• Square Units: Area always expressed in square units

• Formula Rearrangement: b = A/h, h = A/b, l = A/w, w = A/l

• Unit Consistency: All measurements must be in the same units

Example Progression (Simple to Advanced)

Simple: Rectangle 5×3 → A = 5×3 = 15 square units

Intermediate: Parallelogram with base 8 and height 5 → A = 8×5 = 40 square units

Advanced: Real-world problem requiring multiple steps and unit conversions

Questions & Answers

Question: I'm confused about the difference between the height of a parallelogram and the length of its side. Aren't they the same thing?

Answer: Great question! The height and the side length of a parallelogram are usually different:

  • Height: The perpendicular distance from the base to the opposite side (measured at a 90° angle to the base)
  • Side length: The actual length of the slanted side of the parallelogram

Imagine a parallelogram that's tilted. If you measure straight up from the base to the top, that's the height. But if you measure along the slanted side, that's the side length, which is longer than the height.

Example: In a parallelogram with a base of 10 units and side length of 8 units, if the height is 6 units, then A = 10 × 6 = 60 square units, not 10 × 8 = 80.

For rectangles, the height and side length happen to be the same because all angles are 90°, but for other parallelograms, they're different!

Always use the perpendicular height in area calculations, not the side length.

Question: How can I remember which formula to use for rectangles vs parallelograms? They seem similar.

Answer: Actually, you can think of them as using the same fundamental formula, A = base × height!

  • Rectangle: A = length × width, but length and width are essentially base and height since they're perpendicular
  • Parallelogram: A = base × height, where height is perpendicular to the base

Memory aids:

  • "For rectangles: length times width" (A = l × w)
  • "For parallelograms: base times height" (A = b × h)
  • "Both use base × height concept"

A rectangle is actually a special type of parallelogram where all angles are 90°, so both formulas are fundamentally the same: multiply a side by the perpendicular distance to the opposite side.

The key is always to identify what serves as the "base" and measure the "height" perpendicular to it, regardless of the shape.

Question: When I need to find a missing dimension, how do I rearrange the formula? I always get confused.

Answer: Rearranging formulas follows the principle of keeping both sides equal:

Starting with: A = b × h

  • To find base (b): Divide both sides by h → b = A ÷ h
  • To find height (h): Divide both sides by b → h = A ÷ b

Think of it like a balance scale: whatever you do to one side, you must do to the other side to keep it balanced.

Example: If A = 24 and h = 6, to find b:

24 = b × 6

24 ÷ 6 = (b × 6) ÷ 6

4 = b

To verify: A = b × h = 4 × 6 = 24 ✓

The key is to perform the inverse operation: if the unknown is multiplied by something, divide both sides by that value.

Question: Why do we use square units for area? What's the difference between square units and regular units?

Answer: The type of unit depends on what dimension you're measuring:

  • Linear units (cm, m, ft): Measure one-dimensional things like length, width, height
  • Square units (cm², m², ft²): Measure two-dimensional things like area
  • Cubic units (cm³, m³, ft³): Measure three-dimensional things like volume

When calculating area, you're multiplying two linear measurements together:

Area = length × width

Area = cm × cm = cm² (square centimeters)

Area = ft × ft = ft² (square feet)

The "²" symbol indicates that the unit has been squared, meaning it represents a two-dimensional measurement.

This makes sense because area measures how many square units fit inside a shape. A rectangle that's 3 cm by 4 cm can fit 12 little squares, each 1 cm by 1 cm, so the area is 12 cm².

Question: What are some real-world applications of calculating area? Why is this concept important?

Answer: Area calculations have countless practical applications:

  • Construction: Calculating flooring, roofing, paint, or tile needs
  • Agriculture: Determining field sizes for crop planning and seed requirements
  • Manufacturing: Material planning for sheet metal, fabric, or plastic products
  • Real Estate: Property valuation based on lot and building sizes
  • Interior Design: Carpet, wallpaper, and furniture placement planning

In construction, knowing the area of a room helps determine how much carpet or flooring material to purchase. For a 12 ft by 15 ft room, you'd need 12 × 15 = 180 square feet of material.

In agriculture, farmers calculate field areas to determine how much seed, fertilizer, or pesticide to apply per acre.

These calculations are essential for budgeting materials, planning projects efficiently, and solving real-world measurement problems. Understanding area also builds the foundation for more advanced geometry concepts.

Area calculations are fundamental in almost every profession that involves measurement, design, or construction!