Solved Exercises on Area of Regular Polygons

Master area of regular polygons: using apothem and perimeter, finding missing dimensions, and real-world applications with these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Regular hexagon area
Exercise 1
Find the area of a regular hexagon with a side length of 8 cm and an apothem of 6.93 cm.
Definition:

Regular Polygon: A polygon with all sides equal and all angles equal. Apothem: The perpendicular distance from the center to any side. Area Formula: A = (1/2)Pa, where P is the perimeter and a is the apothem.

Method:
  1. Identify the number of sides (n), side length (s), and apothem (a)
  2. Calculate the perimeter: P = n × s
  3. Apply the area formula: A = (1/2)Pa
  4. Express the answer in square units
Given
n=6, s=8, a=6.93
Formula
A = (1/2)Pa
Result
A = 166.32 cm²
Step 1: Identify the polygon properties

Regular hexagon: n = 6 sides

Side length (s) = 8 cm

Apothem (a) = 6.93 cm

Step 2: Calculate the perimeter

Perimeter (P) = n × s

P = 6 × 8 = 48 cm

Step 3: Apply the area formula

Area = (1/2) × Perimeter × Apothem

A = (1/2) × 48 × 6.93

Step 4: Calculate the area

A = (1/2) × 332.64 = 166.32 square centimeters

Area = 166.32 cm²
Final answer:

The area of the regular hexagon is approximately 166.32 cm².

Applied rules:

• Regular Polygon Area: A = (1/2)Pa

• Perimeter: P = n × s

• Perpendicular Distance: Apothem is perpendicular to each side

2 Finding apothem
Exercise 2
A regular octagon has an area of 240 square inches and a perimeter of 60 inches. Find the length of its apothem.
Definition:

Area Formula Manipulation: The area formula A = (1/2)Pa can be rearranged to solve for any variable when the others are known: a = 2A/P.

Given
A=240, P=60
Formula
a = 2A/P
Result
a = 8 in
Step 1: Identify known values

Area (A) = 240 square inches

Perimeter (P) = 60 inches

Apothem (a) = ? (unknown)

Step 2: Start with the area formula

A = (1/2)Pa

240 = (1/2) × 60 × a

Step 3: Solve for the unknown apothem

Multiply both sides by 2: 2A = Pa

Divide both sides by P: a = 2A/P

Step 4: Substitute known values

a = 2(240)/60

a = 480/60

Step 5: Calculate the result

a = 8 inches

Step 6: Verify the answer

Check: A = (1/2) × 60 × 8 = (1/2) × 480 = 240 ✓

Apothem = 8 inches
Final answer:

The apothem of the regular octagon is 8 inches.

Applied rules:

• Formula Rearrangement: A = (1/2)Pa → a = 2A/P

• Algebra: Perform inverse operations to isolate variable

• Verification: Check answer by substitution

3 Finding side length
Exercise 3
A regular pentagon has an area of 150 square feet and an apothem of 10 feet. Find the length of each side.
Definition:

Side Length Calculation: When area and apothem are known, first find the perimeter using P = 2A/a, then find side length using s = P/n.

Given
A=150, a=10, n=5
Formula
s = 2A/(na)
Result
s = 6 ft
Step 1: Identify known values

Area (A) = 150 square feet

Apothem (a) = 10 feet

Number of sides (n) = 5 (pentagon)

Side length (s) = ? (unknown)

Step 2: Find the perimeter using the area formula

Starting with A = (1/2)Pa

P = 2A/a

P = 2(150)/10 = 300/10 = 30 feet

Step 3: Find the side length

Since P = n × s, then s = P/n

s = 30/5 = 6 feet

Step 4: Verify the answer

Check: P = 5 × 6 = 30 feet

A = (1/2) × 30 × 10 = (1/2) × 300 = 150 ✓

Step 5: Alternative direct calculation

From A = (1/2)Pa and P = ns:

A = (1/2)(ns)a = (1/2)n(sa)

Therefore: s = 2A/(na) = 2(150)/(5×10) = 300/50 = 6 feet

Side length = 6 feet
Final answer:

Each side of the regular pentagon is 6 feet long.

Applied rules:

• Formula Rearrangement: A = (1/2)Pa → s = 2A/(na)

• Perimeter Relationship: P = n × s

• Verification: Check answer by substitution

Rules and methods, laws,...
\(A = \frac{1}{2}Pa\)
Regular Polygon Area Formula
General Formula
\(A = \frac{1}{2}Pa\)
Half perimeter times apothem
Missing Apothem
\(a = \frac{2A}{P}\)
When area and perimeter are known
Missing Side
\(s = \frac{2A}{na}\)
When area, apothem, and number of sides are known
Key definitions:

Area: The amount of space inside a two-dimensional shape, measured in square units.

Regular Polygon: A polygon with all sides equal and all interior angles equal.

Apothem: The perpendicular distance from the center of the polygon to any side.

Perimeter: The total distance around the polygon, P = n × s.

Side Length: The length of each side of the regular polygon.

Complete methodology:
  1. Identify the shape: Confirm it's a regular polygon (all sides and angles equal)
  2. Identify dimensions: Locate the apothem and perimeter or sufficient information to calculate them
  3. Select appropriate formula: A = (1/2)Pa
  4. Substitute values: Replace variables with known measurements
  5. Perform calculations: Multiply perimeter by apothem, then divide by 2
  6. Express answer: Include proper square units
Important Properties: Area is always measured in square units. Apothem is perpendicular to each side.
Measurement Units: Area units are square versions of linear units (cm², m², ft², etc.).
Formulas to know by heart:

• General Regular Polygon Area: A = (1/2)Pa

• Missing Apothem: a = 2A/P

• Missing Side: s = 2A/(na)

• Perimeter: P = n × s

Solution: Exercises 4 to 5
4 Square as regular polygon
Exercise 4
A square is a regular polygon with 4 sides. If its side length is 10 cm, find its area using the regular polygon formula and verify it matches the square area formula.
Definition:

Square as Regular Polygon: A square is a regular polygon with 4 equal sides and 4 equal angles. For a square with side length s, the apothem equals s/2.

Given
n=4, s=10
Apothem
a = s/2 = 5
Result
A = 100 cm²
Step 1: Identify the square properties

Number of sides (n) = 4

Side length (s) = 10 cm

For a square, apothem (a) = s/2 = 10/2 = 5 cm

Step 2: Calculate the perimeter

Perimeter (P) = n × s = 4 × 10 = 40 cm

Step 3: Apply the regular polygon area formula

Area = (1/2) × Perimeter × Apothem

A = (1/2) × 40 × 5 = (1/2) × 200 = 100 square cm

Step 4: Verify using square area formula

Traditional square area: A = s² = 10² = 100 square cm ✓

Step 5: General relationship for squares

For any square with side s: a = s/2, P = 4s

A = (1/2) × 4s × s/2 = (1/2) × 2s² = s² ✓

Area = 100 cm² (verified)
Final answer:

The area of the square is 100 cm², confirming both formulas give the same result.

Applied rules:

• Regular Polygon Formula: A = (1/2)Pa

• Square Properties: Apothem = side/2

• Verification: Confirm with traditional square formula

5 Real-world application
Exercise 5
A regular hexagonal garden has sides of 12 feet each and an apothem of 10.39 feet. If grass seed costs $0.50 per square foot, how much will it cost to reseed the entire garden?
Definition:

Real-world Application: Using area calculations to solve practical problems involving cost, coverage, or distribution.

Garden area
(1/2)(72)(10.39) = 374.04 ft²
Cost per sq ft
$0.50
Total cost
374.04×$0.50 = $187.02
Step 1: Calculate the area of the hexagonal garden

Regular hexagon: n = 6 sides

Side length (s) = 12 feet

Perimeter (P) = n × s = 6 × 12 = 72 feet

Apothem (a) = 10.39 feet

Area = (1/2) × P × a = (1/2) × 72 × 10.39 = (1/2) × 748.08 = 374.04 square feet

Step 2: Identify the cost per square foot

Cost per square foot = $0.50

Step 3: Calculate the total cost

Total Cost = Area × Cost per square foot

Total Cost = 374.04 × $0.50 = $187.02

Step 4: Verify the calculation

Check: 374.04 sq ft × $0.50/sq ft = $187.02 ✓

Step 5: Consider practical aspects

In reality, some extra seed might be needed for waste or uneven spreading

Total cost = $187.02
Final answer:

It will cost $187.02 to reseed the entire hexagonal garden.

Applied rules:

• Area Calculation: Find total area using regular polygon formula

• Cost Calculation: Multiply area by cost per unit area

• Real-world Context: Apply mathematical results to practical situations

Comprehensive Summary: Area of Regular Polygons
\(A = \frac{1}{2}Pa\)
Fundamental Formula
Key Definitions:

Area: The measure of the surface enclosed by a two-dimensional shape, expressed in square units.

Regular Polygon: A polygon with all sides equal in length and all interior angles equal.

Apothem: The perpendicular distance from the center of the polygon to any side.

Perimeter: The total distance around the polygon, calculated as P = n × s.

Central Angle: The angle formed at the center by two radii connecting to consecutive vertices.

Core Methods and Procedures:
  1. Shape Identification: Confirm the polygon is regular (all sides and angles equal)
  2. Dimension Measurement: Identify the apothem and either the perimeter or sufficient information to calculate it
  3. Formula Selection: Use A = (1/2)Pa for any regular polygon
  4. Unit Consistency: Ensure all measurements are in the same units
  5. Calculation: Multiply perimeter by apothem, divide by 2
  6. Expression: State the answer in appropriate square units
Tip 1: Always ensure the apothem is measured perpendicular from the center to any side.
Tip 2: Remember that area is always expressed in square units (cm², m², ft², etc.).
Tip 3: You can rearrange area formulas to find missing dimensions: a = 2A/P, s = 2A/(na).
Tip 4: The regular polygon area formula can be thought of as "triangle area" repeated n times.
Tip 5: A regular polygon can be divided into n congruent triangles with the center as a vertex and a side as the base.
Common Mistakes: Using slanted distance instead of perpendicular apothem, confusing apothem with radius, forgetting to divide by 2.
Exam Preparation: Memorize the area formula, practice finding missing dimensions, work on real-world applications.
Essential Rules and Laws:

• Regular Polygon Area: A = (1/2)Pa

• Apothem Definition: Perpendicular distance from center to side

• Perimeter Formula: P = n × s

• Formula Rearrangement: a = 2A/P, s = 2A/(na)

• Unit Consistency: All measurements must be in the same units

• Square Units: Area always expressed in square units

Example Progression (Simple to Advanced)

Simple: Regular triangle (equilateral) with known side and apothem

Intermediate: Find missing apothem when area and perimeter are known

Advanced: Real-world problem requiring area calculation and cost determination

Questions & Answers

Question: I'm confused about what an apothem is. How is it different from the radius of the polygon?

Answer: Great question! The apothem and radius are both measurements from the center of a regular polygon, but they go to different places:

Apothem: A line segment from the center of the polygon perpendicular to any of its sides. It touches the middle of a side.

Radius: A line segment from the center of the polygon to any of its vertices (corners).

Think of it this way:

  • The apothem is like the "shortest distance" from the center to any side
  • The radius reaches all the way to a corner
  • The apothem is always shorter than the radius (except in the case of a circle)

For example, in a square with side length s:

  • Radius = distance from center to corner = s√2/2
  • Apothem = distance from center to middle of side = s/2

The apothem is what we use in the area formula A = (1/2)Pa because it represents the "height" of each triangular section when the polygon is divided from the center.

Question: Is a square really a regular polygon? How does the regular polygon formula work for squares?

Answer: Yes, a square is definitely a regular polygon! A regular polygon is defined as having all sides equal and all angles equal. A square meets both criteria perfectly.

Let's see how the regular polygon formula works for a square with side length s:

  • Number of sides (n) = 4
  • Perimeter (P) = 4s
  • Apothem (a) = s/2 (distance from center to middle of any side)
  • Using A = (1/2)Pa: A = (1/2) × 4s × s/2 = (1/2) × 2s² = s²

This gives us the familiar square area formula A = s²!

In fact, the regular polygon formula is very general - it works for equilateral triangles, squares, regular pentagons, hexagons, and any other regular polygon. The traditional area formulas for specific shapes are just special cases of this general formula.

This shows the beauty of mathematics - one general formula can encompass many specific cases!

Question: When I need to find a missing dimension in a regular polygon, how do I rearrange the formula A = (1/2)Pa?

Answer: Rearranging the regular polygon formula is straightforward! Here's how:

Starting with: A = (1/2)Pa

To eliminate the fraction, multiply both sides by 2:

2A = Pa

Now you can solve for any variable:

  • To find apothem (a): Divide both sides by P → a = 2A/P
  • To find perimeter (P): Divide both sides by a → P = 2A/a
  • To find side length (s): Since P = ns, substitute and solve → s = 2A/(na)

Example: If A = 100, P = 40, find a:

2(100) = 40a

200 = 40a

a = 200/40 = 5

To verify: A = (1/2) × 40 × 5 = (1/2) × 200 = 100 ✓

The key is to eliminate the fraction first by multiplying both sides by 2, then use normal algebra techniques to isolate the variable you need.

Question: How does the regular polygon area formula A = (1/2)Pa make sense intuitively? Why does it work?

Answer: The formula A = (1/2)Pa makes intuitive sense when you think about how a regular polygon can be divided!

Imagine drawing lines from the center of the polygon to each of its vertices. This divides the polygon into n congruent triangles, where n is the number of sides.

Each of these triangles has:

  • A base equal to the side length (s)
  • A height equal to the apothem (a)

The area of each small triangle is (1/2) × base × height = (1/2) × s × a.

Since there are n such triangles, the total area is:

A = n × (1/2) × s × a = (1/2) × (n × s) × a = (1/2) × P × a

This is exactly our formula A = (1/2)Pa!

You can think of it as: the area of a regular polygon equals the sum of n triangular sections, each with base equal to the side length and height equal to the apothem.

This decomposition into triangles is what makes the formula so elegant and memorable!

Question: What are some real-world applications of calculating regular polygon areas? Why is this concept important?

Answer: Regular polygon area calculations have numerous practical applications:

  • Architecture: Designing buildings with polygonal floor plans, domes, and decorative elements
  • Manufacturing: Creating nuts, bolts, and other hardware with polygonal cross-sections
  • Landscaping: Designing flower beds, fountains, and garden features
  • Electronics: Designing chips and components with polygonal shapes
  • Art and Design: Creating patterns, tiles, and decorative works

In construction, knowing the area of a regular hexagonal column helps determine the amount of concrete needed. For a hexagonal column with side length 2 ft and apothem 1.73 ft: P = 6×2 = 12 ft, A = (1/2)×12×1.73 = 10.38 sq ft.

In manufacturing, hexagonal nuts are common because they provide good grip with wrenches and use less material than circular shapes while providing strength.

These calculations are essential for material estimation, cost calculation, and structural design. Understanding regular polygon areas also builds the foundation for more advanced geometry, trigonometry, and calculus concepts.

Regular polygon area calculations are fundamental in engineering, design, and many other fields that involve measurement and construction!