Solved Exercises on Area of Trapezoids

Master area of trapezoids: using bases and height, finding missing dimensions, and real-world applications with these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Trapezoid area
Exercise 1
Find the area of a trapezoid with bases of 12 cm and 8 cm, and a height of 6 cm.
Definition:

Trapezoid: A quadrilateral with exactly one pair of parallel sides. Area Formula: A = (1/2)(b₁ + b₂)h, where b₁ and b₂ are the parallel bases and h is the height.

Method:
  1. Identify the two parallel bases (b₁ and b₂) and the height (h)
  2. Apply the area formula: A = (1/2)(b₁ + b₂)h
  3. Add the lengths of the two bases
  4. Multiply the sum by the height
  5. Divide the product by 2
  6. Express the answer in square units
Bases & Height
b₁=12, b₂=8, h=6
Formula
A = (1/2)(b₁+b₂)h
Result
A = 60 cm²
Step 1: Identify the bases and height

Base 1 (b₁) = 12 cm

Base 2 (b₂) = 8 cm

Height (h) = 6 cm (the perpendicular distance between the parallel bases)

Step 2: Apply the trapezoid area formula

Area = (1/2)(b₁ + b₂)h

Area = (1/2)(12 + 8) × 6

Step 3: Add the bases

Area = (1/2)(20) × 6

Step 4: Multiply by the height

Area = (1/2) × 120

Step 5: Divide by 2

Area = 60 square centimeters

Area = 60 cm²
Final answer:

The area of the trapezoid is 60 cm².

Applied rules:

• Trapezoid Area: A = (1/2)(b₁ + b₂)h

• Parallel Bases: Use the two parallel sides as b₁ and b₂

• Perpendicular Height: Height must be perpendicular to the parallel bases

2 Finding missing base
Exercise 2
A trapezoid has an area of 45 square inches, a height of 5 inches, and one base of 7 inches. Find the length of the other base.
Definition:

Area Formula Manipulation: The area formula A = (1/2)(b₁ + b₂)h can be rearranged to solve for any variable when the others are known.

Given
A=45, h=5, b₁=7
Formula
b₂ = 2A/h - b₁
Result
b₂ = 11 in
Step 1: Identify known values

Area (A) = 45 square inches

Height (h) = 5 inches

Base 1 (b₁) = 7 inches

Base 2 (b₂) = ? (unknown)

Step 2: Start with the area formula

A = (1/2)(b₁ + b₂)h

45 = (1/2)(7 + b₂) × 5

Step 3: Solve for the unknown base

Multiply both sides by 2: 2A = (b₁ + b₂)h

Divide both sides by h: 2A/h = b₁ + b₂

Subtract b₁ from both sides: b₂ = 2A/h - b₁

Step 4: Substitute known values

b₂ = 2(45)/5 - 7

b₂ = 90/5 - 7

b₂ = 18 - 7

Step 5: Calculate the result

b₂ = 11 inches

Step 6: Verify the answer

Check: A = (1/2)(7 + 11) × 5 = (1/2)(18) × 5 = 9 × 5 = 45 ✓

Base 2 = 11 inches
Final answer:

The length of the other base is 11 inches.

Applied rules:

• Formula Rearrangement: A = (1/2)(b₁ + b₂)h → b₂ = 2A/h - b₁

• Algebra: Perform inverse operations to isolate variable

• Verification: Check answer by substitution

3 Finding missing height
Exercise 3
A trapezoid has an area of 72 square feet, with bases of 10 feet and 14 feet. Find the height of the trapezoid.
Definition:

Height Calculation: When area and both bases are known, height can be found by rearranging the area formula: h = 2A/(b₁ + b₂).

Given
A=72, b₁=10, b₂=14
Formula
h = 2A/(b₁+b₂)
Result
h = 6 ft
Step 1: Identify known values

Area (A) = 72 square feet

Base 1 (b₁) = 10 feet

Base 2 (b₂) = 14 feet

Height (h) = ? (unknown)

Step 2: Start with the area formula

A = (1/2)(b₁ + b₂)h

72 = (1/2)(10 + 14)h

Step 3: Solve for the unknown height

Multiply both sides by 2: 2A = (b₁ + b₂)h

Divide both sides by (b₁ + b₂): h = 2A/(b₁ + b₂)

Step 4: Substitute known values

h = 2(72)/(10 + 14)

h = 144/24

Step 5: Calculate the result

h = 6 feet

Step 6: Verify the answer

Check: A = (1/2)(10 + 14) × 6 = (1/2)(24) × 6 = 12 × 6 = 72 ✓

Height = 6 feet
Final answer:

The height of the trapezoid is 6 feet.

Applied rules:

• Formula Rearrangement: A = (1/2)(b₁ + b₂)h → h = 2A/(b₁ + b₂)

• Algebra: Isolate variable by performing inverse operations

• Verification: Check answer by substitution

Rules and methods, laws,...
\(A = \frac{1}{2}(b_1 + b_2)h\)
Trapezoid Area Formula
General Trapezoid
\(A = \frac{1}{2}(b_1 + b_2)h\)
Half the sum of bases times height
Missing Base
\(b_2 = \frac{2A}{h} - b_1\)
When area and height are known
Missing Height
\(h = \frac{2A}{b_1 + b_2}\)
When area and both bases are known
Key definitions:

Area: The amount of space inside a two-dimensional shape, measured in square units.

Trapezoid: A quadrilateral with exactly one pair of parallel sides.

Bases: The two parallel sides of a trapezoid (b₁ and b₂).

Height: The perpendicular distance between the two parallel bases.

Legs: The two non-parallel sides of a trapezoid.

Complete methodology:
  1. Identify the shape: Confirm it's a trapezoid (one pair of parallel sides)
  2. Identify dimensions: Locate the two parallel bases and the height
  3. Select appropriate formula: A = (1/2)(b₁ + b₂)h
  4. Substitute values: Replace variables with known measurements
  5. Perform calculations: Add bases, multiply by height, divide by 2
  6. Express answer: Include proper square units
Important Properties: Area is always measured in square units. Height must be perpendicular to the parallel bases.
Measurement Units: Area units are square versions of linear units (cm², m², ft², etc.).
Formulas to know by heart:

• General Trapezoid Area: A = (1/2)(b₁ + b₂)h

• Missing Base: b₂ = 2A/h - b₁

• Missing Height: h = 2A/(b₁ + b₂)

Solution: Exercises 4 to 5
4 Isosceles trapezoid
Exercise 4
An isosceles trapezoid has parallel sides of 15 cm and 9 cm, with legs of 8 cm each. If the area is 72 square cm, verify the height and confirm the area calculation.
Definition:

Isosceles Trapezoid: A trapezoid with legs of equal length and base angles equal.

Given
A=72, b₁=15, b₂=9
Formula
h = 2A/(b₁+b₂)
Result
h = 6 cm
Step 1: Identify known values

Area (A) = 72 square cm

Base 1 (b₁) = 15 cm

Base 2 (b₂) = 9 cm

Height (h) = ? (to be verified)

Step 2: Calculate the height using the area formula

Starting with A = (1/2)(b₁ + b₂)h

h = 2A/(b₁ + b₂)

h = 2(72)/(15 + 9)

h = 144/24 = 6 cm

Step 3: Verify the area calculation

Using the calculated height: A = (1/2)(15 + 9) × 6

A = (1/2)(24) × 6 = 12 × 6 = 72 square cm ✓

Step 4: Confirm the trapezoid is isosceles

Both legs are 8 cm, confirming it's isosceles

Step 5: Check if the dimensions make sense

With bases 15 and 9 cm and height 6 cm, the trapezoid is geometrically possible

Height = 6 cm, Area confirmed as 72 cm²
Final answer:

The height of the isosceles trapezoid is 6 cm, confirming the area of 72 cm².

Applied rules:

• Formula Rearrangement: A = (1/2)(b₁ + b₂)h → h = 2A/(b₁ + b₂)

• Verification: Confirm area calculation using found height

• Isosceles Property: Equal legs confirm isosceles trapezoid

5 Real-world application
Exercise 5
A trapezoidal garden has parallel sides of 20 feet and 12 feet, with a height of 10 feet. If mulch costs $3 per square foot, how much will it cost to cover the entire garden?
Definition:

Real-world Application: Using area calculations to solve practical problems involving cost, coverage, or distribution.

Garden area
(1/2)(20+12)×10 = 160 ft²
Cost per sq ft
$3
Total cost
160×$3 = $480
Step 1: Calculate the area of the trapezoidal garden

Area = (1/2)(b₁ + b₂)h

Area = (1/2)(20 + 12) × 10 = (1/2)(32) × 10 = 16 × 10 = 160 square feet

Step 2: Identify the cost per square foot

Cost per square foot = $3

Step 3: Calculate the total cost

Total Cost = Area × Cost per square foot

Total Cost = 160 × $3 = $480

Step 4: Verify the calculation

Check: 160 sq ft × $3/sq ft = $480 ✓

Step 5: Consider practical aspects

In reality, some extra mulch might be needed for waste or uneven spreading

Total cost = $480
Final answer:

It will cost $480 to cover the trapezoidal garden with mulch.

Applied rules:

• Area Calculation: Find total area using trapezoid formula

• Cost Calculation: Multiply area by cost per unit area

• Real-world Context: Apply mathematical results to practical situations

Comprehensive Summary: Area of Trapezoids
\(A = \frac{1}{2}(b_1 + b_2)h\)
Fundamental Formula
Key Definitions:

Area: The measure of the surface enclosed by a two-dimensional shape, expressed in square units.

Trapezoid: A quadrilateral with exactly one pair of parallel sides.

Bases: The two parallel sides of a trapezoid (b₁ and b₂).

Height: The perpendicular distance between the two parallel bases.

Isosceles Trapezoid: A trapezoid with legs of equal length.

Core Methods and Procedures:
  1. Shape Identification: Confirm the figure is a trapezoid (one pair of parallel sides)
  2. Dimension Measurement: Identify the two parallel bases and the perpendicular height
  3. Formula Selection: Use A = (1/2)(b₁ + b₂)h for any trapezoid
  4. Unit Consistency: Ensure all measurements are in the same units
  5. Calculation: Add bases, multiply by height, divide by 2
  6. Expression: State the answer in appropriate square units
Tip 1: Always ensure the height is measured perpendicular to the parallel bases.
Tip 2: Remember that area is always expressed in square units (cm², m², ft², etc.).
Tip 3: You can rearrange area formulas to find missing dimensions: b₂ = 2A/h - b₁, h = 2A/(b₁ + b₂).
Tip 4: The trapezoid area formula can be thought of as "average of bases times height."
Tip 5: A parallelogram is a special case of a trapezoid where both pairs of opposite sides are parallel.
Common Mistakes: Using slanted height instead of perpendicular height, confusing bases with legs, forgetting to divide by 2.
Exam Preparation: Memorize the area formula, practice finding missing dimensions, work on real-world applications.
Essential Rules and Laws:

• Trapezoid Area: A = (1/2)(b₁ + b₂)h

• Parallel Bases: Use the two parallel sides as b₁ and b₂

• Height Requirement: Must be perpendicular to the parallel bases

• Formula Rearrangement: b₂ = 2A/h - b₁, h = 2A/(b₁ + b₂)

• Unit Consistency: All measurements must be in the same units

• Square Units: Area always expressed in square units

Example Progression (Simple to Advanced)

Simple: Trapezoid with bases 6 and 4, height 3 → A = (1/2)(6+4)×3 = 15 square units

Intermediate: Find missing base when area and height are known

Advanced: Real-world problem requiring area calculation and cost determination

Questions & Answers

Question: I'm confused about why we add the bases and then divide by 2 in the trapezoid area formula. Why not just multiply them?

Answer: Great question! The trapezoid area formula is actually based on the idea of averaging the two parallel bases.

Think of it this way:

  • A trapezoid is like a rectangle that's been "squished" - one end is wider than the other
  • The average of the two bases gives you the "effective width" of the trapezoid
  • Then you multiply this average width by the height to get the area

For example, if you have a trapezoid with bases of 6 and 4:

  • Average base = (6 + 4)/2 = 5
  • Area = average base × height = 5 × h
  • This is equivalent to (1/2)(6 + 4)h

The formula (1/2)(b₁ + b₂)h is the same as ((b₁ + b₂)/2) × h, which is the average of the bases times the height!

This makes intuitive sense - you're finding the area of a rectangle with the average width of your trapezoid.

Question: Is a rectangle a special kind of trapezoid? How does the area formula work for rectangles?

Answer: Yes, a rectangle is a special case of a trapezoid! A trapezoid is defined as a quadrilateral with at least one pair of parallel sides. Since a rectangle has two pairs of parallel sides, it fits the definition.

Let's see how the trapezoid formula works for a rectangle:

  • For a rectangle with length l and width w, the parallel bases are both equal to l (or both equal to w)
  • So b₁ = l and b₂ = l
  • Height = w
  • Using the trapezoid formula: A = (1/2)(l + l)w = (1/2)(2l)w = lw
  • This is exactly the rectangle area formula!

In fact, other shapes like parallelograms and rhombuses are also special cases of trapezoids where both pairs of opposite sides are parallel.

The trapezoid area formula is very general - it works for rectangles, parallelograms, and any other shape with at least one pair of parallel sides!

Question: When I need to find a missing dimension in a trapezoid, how do I rearrange the formula A = (1/2)(b₁ + b₂)h?

Answer: Rearranging the trapezoid formula is easier than it looks! Here's how:

Starting with: A = (1/2)(b₁ + b₂)h

To eliminate the fraction, multiply both sides by 2:

2A = (b₁ + b₂)h

Now you can solve for any variable:

  • To find height (h): Divide both sides by (b₁ + b₂) → h = 2A/(b₁ + b₂)
  • To find base 2 (b₂): Divide by h, then subtract b₁ → b₂ = 2A/h - b₁
  • To find base 1 (b₁): Similarly → b₁ = 2A/h - b₂

Example: If A = 30, b₁ = 6, h = 5, find b₂:

2(30) = (6 + b₂)(5)

60 = 5(6 + b₂)

60/5 = 6 + b₂

12 = 6 + b₂

b₂ = 6

To verify: A = (1/2)(6 + 6) × 5 = (1/2)(12) × 5 = 6 × 5 = 30 ✓

The key is to eliminate the fraction first by multiplying both sides by 2, then use normal algebra techniques.

Question: How can I remember which sides are the bases in a trapezoid? What if it's rotated?

Answer: The bases of a trapezoid are always the two parallel sides, regardless of orientation!

Key points to remember:

  • The bases are the two sides that never intersect if extended
  • They run parallel to each other
  • It doesn't matter which one you call b₁ or b₂ in the formula
  • The trapezoid can be rotated in any direction - the parallel sides remain the bases

To identify the bases:

  • Look for the two sides that run in the same direction
  • Extend those sides with imaginary lines - if they never meet, they're parallel
  • The perpendicular distance between these parallel sides is the height

For example, if a trapezoid is standing on its side (with the legs as the top and bottom), the bases are still the two parallel sides - they just happen to be the left and right sides in that orientation.

The key is to identify parallelism, not position!

Question: What are some real-world applications of calculating trapezoid areas? Why is this concept important?

Answer: Trapezoid area calculations have numerous practical applications:

  • Construction: Calculating roofing materials for trapezoidal sections, retaining walls
  • Architecture: Designing windows, doors, or building sections with trapezoidal shapes
  • Land Surveying: Measuring irregular plots by dividing into trapezoids
  • Manufacturing: Material planning for trapezoidal components
  • Hydraulics: Calculating cross-sectional areas of channels and pipes

In construction, knowing the area of a trapezoidal roof section helps determine how much material is needed. For a trapezoidal section with parallel sides of 15 ft and 10 ft, and height of 8 ft: A = (1/2)(15 + 10) × 8 = (1/2)(25) × 8 = 100 square feet.

In land surveying, large irregular plots are often divided into trapezoids, and the total area is found by summing the areas of all trapezoids.

These calculations are essential for budgeting materials, planning projects efficiently, and solving real-world measurement problems. Understanding trapezoid areas also builds the foundation for more advanced geometry and calculus concepts.

Trapezoid area calculations are fundamental in engineering, architecture, and many other professions that involve measurement and design!