Solved Exercises on Area of Triangles

Master area of triangles: using base and height, finding missing dimensions, right triangles, and composite shapes with these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Triangle area
Exercise 1
Find the area of a triangle with base 10 cm and height 8 cm.
Definition:

Triangle: A polygon with three sides. Area Formula: A = (1/2) × base × height or A = (1/2)bh.

Method:
  1. Identify the base and height of the triangle
  2. Apply the area formula: A = (1/2) × b × h
  3. Multiply the base by the height
  4. Divide the product by 2
  5. Express the answer in square units
Dimensions
b=10, h=8
Formula
A = (1/2)bh
Result
A = 40 cm²
Step 1: Identify the base and height

Base (b) = 10 cm

Height (h) = 8 cm (the perpendicular distance from base to opposite vertex)

Step 2: Apply the triangle area formula

Area = (1/2) × Base × Height

Area = (1/2) × 10 × 8

Step 3: Calculate the product

Area = (1/2) × 80

Step 4: Divide by 2

Area = 80 ÷ 2 = 40 square centimeters

Area = 40 cm²
Final answer:

The area of the triangle is 40 cm².

Applied rules:

• Triangle Area: A = (1/2)bh

• Perpendicular Height: Height must be perpendicular to base

• Square Units: Area is measured in square units

2 Right triangle area
Exercise 2
Find the area of a right triangle with legs measuring 6 inches and 8 inches.
Definition:

Right Triangle: A triangle with one 90° angle. Legs: The two sides forming the right angle. For right triangles, the legs serve as base and height.

Legs
leg₁=6, leg₂=8
Formula
A = (1/2)bh
Result
A = 24 in²
Step 1: Identify the legs of the right triangle

Leg 1 = 6 inches

Leg 2 = 8 inches

Step 2: Recognize that the legs serve as base and height

In a right triangle, the legs are perpendicular to each other

So, base = 6 inches and height = 8 inches (or vice versa)

Step 3: Apply the triangle area formula

Area = (1/2) × Base × Height

Area = (1/2) × 6 × 8

Step 4: Calculate the area

Area = (1/2) × 48 = 24 square inches

Area = 24 in²
Final answer:

The area of the right triangle is 24 in².

Applied rules:

• Right Triangle Area: A = (1/2)bh where legs are base and height

• Perpendicular Legs: Legs are naturally perpendicular in right triangles

• Square Units: Area is measured in square units

3 Finding missing dimension
Exercise 3
A triangle has an area of 36 square feet and a base of 9 feet. Find the height of the triangle.
Definition:

Area Formula Manipulation: The area formula A = (1/2)bh can be rearranged to solve for any variable when the other two are known: h = 2A/b or b = 2A/h.

Given
A=36, b=9
Formula
h = 2A/b
Result
h = 8 ft
Step 1: Identify known values

Area (A) = 36 square feet

Base (b) = 9 feet

Height (h) = ? (unknown)

Step 2: Start with the area formula

A = (1/2) × b × h

36 = (1/2) × 9 × h

Step 3: Solve for the unknown height

Multiply both sides by 2: 2A = b × h

Divide both sides by b: h = 2A/b

h = 2(36)/9

Step 4: Calculate the result

h = 72/9 = 8 feet

Step 5: Verify the answer

Check: A = (1/2) × 9 × 8 = (1/2) × 72 = 36 ✓

Height = 8 feet
Final answer:

The height of the triangle is 8 feet.

Applied rules:

• Formula Rearrangement: A = (1/2)bh → h = 2A/b

• Algebra: Multiply both sides by 2, then divide by base

• Verification: Check answer by substitution

Rules and methods, laws,...
\(A = \frac{1}{2} \times b \times h\)
Triangle Area Formula
General Triangle
\(A = \frac{1}{2}bh\)
Base times height divided by 2
Right Triangle
\(A = \frac{1}{2}ab\)
Legs as base and height
Derived Formulas
\(b = \frac{2A}{h}, h = \frac{2A}{b}\)
Find missing dimensions
Key definitions:

Area: The amount of space inside a two-dimensional shape, measured in square units.

Triangle: A polygon with three sides and three angles.

Base: Any side of the triangle used for area calculation.

Height: The perpendicular distance from the base to the opposite vertex.

Right Triangle: A triangle with one 90° angle.

Legs: The two sides forming the right angle in a right triangle.

Complete methodology:
  1. Identify the shape: Confirm it's a triangle
  2. Identify dimensions: Locate base and corresponding perpendicular height
  3. Select appropriate formula: A = (1/2)bh
  4. Substitute values: Replace variables with known measurements
  5. Perform calculations: Multiply base by height, then divide by 2
  6. Express answer: Include proper square units
Important Properties: Area is always measured in square units. Height must be perpendicular to the base.
Measurement Units: Area units are square versions of linear units (cm², m², ft², etc.).

Formulas to know by heart:

• General Triangle Area: A = (1/2)bh

• Right Triangle Area: A = (1/2)ab (where a and b are legs)

• Missing Base: b = 2A/h

• Missing Height: h = 2A/b

Solution: Exercises 4 to 5
4 Triangle with given area
Exercise 4
A triangle has an area of 24 square inches. If its height is 6 inches, what is the length of its base? Verify your answer by calculating the area again.
Definition:

Area Verification: Using the calculated dimension to confirm the original area value is correct.

Given
A=24, h=6
Formula
b = 2A/h
Result
b = 8 in
Step 1: Identify known values

Area (A) = 24 square inches

Height (h) = 6 inches

Base (b) = ? (unknown)

Step 2: Use the rearranged formula

Starting with A = (1/2)bh

2A = bh (multiply both sides by 2)

b = 2A/h (divide both sides by h)

Step 3: Substitute known values

b = 2(24)/6

b = 48/6

Step 4: Calculate the base

b = 8 inches

Step 5: Verify the answer

Calculate area using found base: A = (1/2) × 8 × 6 = (1/2) × 48 = 24 ✓

Base = 8 inches (verified)
Final answer:

The base of the triangle is 8 inches.

Applied rules:

• Formula Rearrangement: A = (1/2)bh → b = 2A/h

• Algebra: Isolate variable by performing inverse operations

• Verification: Confirm answer by recalculating area

5 Composite shape
Exercise 5
A triangular garden has a base of 15 feet and a height of 10 feet. If grass seed costs $2 per square foot, how much will it cost to cover the entire garden?
Definition:

Real-world Application: Using area calculations to solve practical problems involving cost, coverage, or distribution.

Garden area
(1/2)×15×10 = 75 ft²
Cost per sq ft
$2
Total cost
75×$2 = $150
Step 1: Calculate the area of the triangular garden

Area = (1/2) × Base × Height

Area = (1/2) × 15 × 10 = (1/2) × 150 = 75 square feet

Step 2: Identify the cost per square foot

Cost per square foot = $2

Step 3: Calculate the total cost

Total Cost = Area × Cost per square foot

Total Cost = 75 × $2 = $150

Step 4: Verify the calculation

Check: 75 sq ft × $2/sq ft = $150 ✓

Step 5: Consider practical aspects

In reality, some extra seed might be needed for waste or uneven spreading

Total cost = $150
Final answer:

It will cost $150 to cover the triangular garden with grass seed.

Applied rules:

• Area Calculation: Find total area using triangle formula

• Cost Calculation: Multiply area by cost per unit area

• Real-world Context: Apply mathematical results to practical situations

Comprehensive Summary: Area of Triangles
\(A = \frac{1}{2} \times b \times h\)
Fundamental Formula
Key Definitions:

Area: The measure of the surface enclosed by a two-dimensional shape, expressed in square units.

Triangle: A polygon with three sides and three angles, with interior angles summing to 180°.

Base: Any side of the triangle that is used as a reference for measuring height.

Height: The perpendicular distance from the base to the opposite vertex.

Right Triangle: A triangle with one 90° angle, where the legs serve as base and height.

Core Methods and Procedures:
  1. Shape Identification: Confirm the figure is a triangle
  2. Dimension Measurement: Identify base and corresponding perpendicular height
  3. Formula Selection: Use A = (1/2)bh for any triangle
  4. Unit Consistency: Ensure all measurements are in the same units
  5. Calculation: Multiply base by height, then divide by 2
  6. Expression: State the answer in appropriate square units
Tip 1: Always ensure the height is measured perpendicular to the base in any triangle.
Tip 2: Remember that area is always expressed in square units (cm², m², ft², etc.).
Tip 3: In right triangles, the legs automatically serve as base and height.
Tip 4: You can rearrange area formulas to find missing dimensions: b = 2A/h, h = 2A/b.
Tip 5: The area of a triangle is half the area of a parallelogram with the same base and height.
Common Mistakes: Using slanted height instead of perpendicular height, forgetting to divide by 2, confusing area with perimeter.
Exam Preparation: Memorize the area formula, practice finding missing dimensions, work on real-world applications.
Essential Rules and Laws:

• Triangle Area: A = (1/2)bh

• Height Requirement: Must be perpendicular to the base

• Square Units: Area always expressed in square units

• Formula Rearrangement: b = 2A/h, h = 2A/b

• Unit Consistency: All measurements must be in the same units

• Right Triangle: Legs serve as base and height

Example Progression (Simple to Advanced)

Simple: Triangle with base 4 and height 6 → A = (1/2)×4×6 = 12 square units

Intermediate: Right triangle with legs 3 and 4 → A = (1/2)×3×4 = 6 square units

Advanced: Real-world problem requiring area calculation and cost determination

Questions & Answers

Question: I'm confused about why we divide by 2 in the triangle area formula. Why isn't it just base times height?

Answer: Great question! The reason we divide by 2 is that a triangle is exactly half the size of a rectangle (or parallelogram) with the same base and height.

Think of it this way:

  • If you take a rectangle with base b and height h, its area is b × h
  • If you draw a diagonal line from corner to corner, you create two identical triangles
  • Each triangle has the same base b and height h as the original rectangle
  • Since the rectangle is split into two equal triangles, each triangle has area (1/2) × b × h

For example, a rectangle that's 6 units by 4 units has area 24 square units. If you cut it diagonally, each triangle has area 12 square units, which is (1/2) × 6 × 4.

This is why the triangle area formula includes the (1/2) - it reflects the fact that a triangle is half of a rectangle with the same base and height!

Question: For right triangles, why can I use the legs as base and height? Isn't height always vertical?

Answer: This is a common misconception! Height in geometry doesn't always mean vertical in the real world sense. Height in the area formula means "perpendicular to the base."

In a right triangle:

  • The two legs form a 90° angle with each other
  • One leg is perpendicular to the other leg
  • So either leg can serve as the base, and the other leg serves as the height

For example, in a right triangle with legs of 3 and 4 units:

  • You can say base = 3, height = 4: A = (1/2) × 3 × 4 = 6
  • Or you can say base = 4, height = 3: A = (1/2) × 4 × 3 = 6
  • Both give the same result!

The key insight is that in right triangles, the legs are naturally perpendicular to each other, making them perfect candidates for base and height in the area formula.

Question: When I need to find a missing dimension, how do I rearrange the formula A = (1/2)bh? It seems tricky with the fraction.

Answer: Rearranging the formula with a fraction is easier than it looks! Here's how:

Starting with: A = (1/2)bh

To eliminate the fraction, multiply both sides by 2:

2A = bh

Now you can easily solve for any variable:

  • To find base (b): Divide both sides by h → b = 2A/h
  • To find height (h): Divide both sides by b → h = 2A/b

Example: If A = 20 and h = 5, to find b:

2(20) = b(5)

40 = 5b

40 ÷ 5 = b

8 = b

To verify: A = (1/2) × 8 × 5 = (1/2) × 40 = 20 ✓

The key is to eliminate the fraction first by multiplying both sides by 2, then use normal algebra techniques.

Question: How can I tell which side of a triangle is the base? Can I pick any side?

Answer: Yes, you can choose any side of the triangle as the base! This is actually a useful feature of the area formula.

However, when you choose a particular side as the base, you must use the height that is perpendicular to that specific base. The height is the distance from the chosen base to the opposite vertex, measured at a right angle to the base.

For example, consider a triangle with sides of different lengths:

  • If you choose the longest side as the base, measure the height perpendicular to that side
  • If you choose a shorter side as the base, measure the height perpendicular to that side

No matter which side you choose as the base, you'll get the same area because the triangle's area is constant. This flexibility can be helpful when one base-height pair is easier to measure or calculate than others.

In right triangles, it's usually easiest to use one of the legs as the base since the other leg automatically serves as the height.

Question: What are some real-world applications of calculating triangle areas? Why is this concept important?

Answer: Triangle area calculations have numerous practical applications:

  • Construction: Calculating roofing materials, triangular gables, truss design
  • Architecture: Designing triangular structures, calculating glass panels
  • Manufacturing: Material planning for triangular components
  • Land Surveying: Measuring irregular plots by dividing into triangles
  • Navigation: Triangulation for position determination

In construction, knowing the area of a triangular roof section helps determine how much shingles or metal roofing is needed. For a triangular section with base 20 ft and height 12 ft, you'd need (1/2) × 20 × 12 = 120 square feet of material.

In land surveying, large irregular plots are often divided into triangles, and the total area is found by summing the areas of all triangles.

These calculations are essential for budgeting materials, planning projects efficiently, and solving real-world measurement problems. Understanding triangle areas also builds the foundation for more advanced geometry and trigonometry concepts.

Triangle area calculations are fundamental in engineering, architecture, and many other professions that involve measurement and design!