Use the slope formula and interpret the result.
Slope Formula: \(m = \frac{y_2-y_1}{x_2-x_1}\)
Slope: The rate of change of y with respect to x, or "rise over run"
Positive Slope: Line rises from left to right
Negative Slope: Line falls from left to right
- Identify coordinates of two points: (x₁, y₁) and (x₂, y₂)
- Substitute into slope formula: \(m = \frac{y_2-y_1}{x_2-x_1}\)
- Calculate the difference in y-values (rise)
- Calculate the difference in x-values (run)
- Divide rise by run to get the slope
Point A: (x₁, y₁) = (2, 3)
Point B: (x₂, y₂) = (6, 7)
\(m = \frac{y_2-y_1}{x_2-x_1} = \frac{7-3}{6-2}\)
\(y_2-y_1 = 7-3 = 4\)
\(x_2-x_1 = 6-2 = 4\)
\(m = \frac{4}{4} = 1\)
The slope of the line passing through points A(2, 3) and B(6, 7) is 1.
• Slope Formula: Consistent order of subtraction (y₂ - y₁)/(x₂ - x₁)
• Positive Slope: When both numerator and denominator have same sign
• Interpretation: Slope of 1 means the line rises 1 unit for every 1 unit moved right
Parallel Lines: Lines with equal slopes (m₁ = m₂)
Perpendicular Lines: Lines with slopes that are negative reciprocals (m₁ × m₂ = -1)
Slope-Intercept Form: y = mx + b, where m is the slope
P(1, 2), Q(4, 6)
\(m_1 = \frac{6-2}{4-1} = \frac{4}{3}\)
R(2, 1), S(5, 5)
\(m_2 = \frac{5-1}{5-2} = \frac{4}{3}\)
\(m_1 = \frac{4}{3}\) and \(m_2 = \frac{4}{3}\)
Since \(m_1 = m_2\), the lines are parallel
For perpendicular lines: \(m_1 \times m_2 = -1\)
\(\frac{4}{3} \times \frac{4}{3} = \frac{16}{9} \neq -1\)
So the lines are not perpendicular
The lines through points P(1, 2) and Q(4, 6), and through points R(2, 1) and S(5, 5) are parallel since both have slope 4/3.
• Parallel Lines: Equal slopes indicate parallel lines
• Perpendicular Lines: Slopes are negative reciprocals (product = -1)
• Comparison: Always compare slopes to determine line relationships
Explain what these special cases represent.
Vertical Line: A line with undefined slope (division by zero)
Horizontal Line: A line with zero slope (no rise)
Undefined Slope: Occurs when x-coordinates are equal (denominator = 0)
C(3, 5), D(3, 9)
\(m_1 = \frac{9-5}{3-3} = \frac{4}{0}\)
Division by zero means the slope is undefined
E(2, 4), F(7, 4)
\(m_2 = \frac{4-4}{7-2} = \frac{0}{5} = 0\)
The slope is 0
Line CD: x-coordinates are the same (both 3), so it's a vertical line with undefined slope
Line EF: y-coordinates are the same (both 4), so it's a horizontal line with slope 0
Vertical line (CD): Goes straight up and down, no horizontal change
Horizontal line (EF): Goes straight left and right, no vertical change
The line through C(3, 5) and D(3, 9) has undefined slope (vertical line). The line through E(2, 4) and F(7, 4) has slope 0 (horizontal line).
• Vertical Line: x₁ = x₂ → undefined slope
• Horizontal Line: y₁ = y₂ → slope = 0
• Special Cases: Division by zero is undefined in mathematics
Slope: The measure of steepness of a line, calculated as the ratio of vertical change to horizontal change
Rate of Change: How much y changes for each unit change in x
Gradient: Another term for slope in mathematics
Rise over Run: Informal way to remember slope calculation
- Identify points: Locate two points on the line (x₁, y₁) and (x₂, y₂)
- Apply formula: Use \(m = \frac{y_2-y_1}{x_2-x_1}\)
- Calculate differences: Find (y₂ - y₁) and (x₂ - x₁)
- Divide: Divide the y-difference by the x-difference
- Interpret: Determine if slope is positive, negative, zero, or undefined
• Slope Formula: \(m = \frac{y_2-y_1}{x_2-x_1}\)
• Parallel Lines: \(m_1 = m_2\)
• Perpendicular Lines: \(m_1 \cdot m_2 = -1\)
• Vertical Line: Undefined slope when \(x_1 = x_2\)
• Horizontal Line: Zero slope when \(y_1 = y_2\)
Right Triangle: A triangle with one 90° angle
Perpendicular Lines: Lines that meet at a 90° angle
Pythagorean Theorem: Alternative method to verify right triangles
A(1, 1), B(4, 5)
\(m_{AB} = \frac{5-1}{4-1} = \frac{4}{3}\)
B(4, 5), C(7, 2)
\(m_{BC} = \frac{2-5}{7-4} = \frac{-3}{3} = -1\)
A(1, 1), C(7, 2)
\(m_{AC} = \frac{2-1}{7-1} = \frac{1}{6}\)
For perpendicular lines: \(m_1 \cdot m_2 = -1\)
\(m_{AB} \cdot m_{BC} = \frac{4}{3} \times (-1) = -\frac{4}{3} \neq -1\)
\(m_{BC} \cdot m_{AC} = (-1) \times \frac{1}{6} = -\frac{1}{6} \neq -1\)
\(m_{AB} \cdot m_{AC} = \frac{4}{3} \times \frac{1}{6} = \frac{4}{18} = \frac{2}{9} \neq -1\)
Since none of the products of slopes equals -1, no sides are perpendicular
Therefore, triangle ABC is not a right triangle
No, triangle ABC with vertices A(1, 1), B(4, 5), and C(7, 2) is not a right triangle because none of its sides are perpendicular.
• Slope Calculation: Apply formula to each side of the triangle
• Perpendicular Test: Check if product of any two slopes equals -1
• Geometric Verification: Use slopes to determine if angles are 90°
Also, find the angle of elevation of the road.
Grade: Slope expressed as a percentage
Angle of Elevation: The angle between the horizontal and the incline
Trigonometry: Relationship between slope and angle using tangent
Rise = 150 feet, Run = 1000 feet
Slope = Rise ÷ Run = 150 ÷ 1000 = 0.15
Grade = Slope × 100%
Grade = 0.15 × 100% = 15%
The slope equals the tangent of the angle of elevation
\(m = \tan(\theta)\), so \(\theta = \arctan(m)\)
\(\theta = \arctan(0.15) \approx 8.53°\)
Slope of 0.15 means the road rises 0.15 feet for every 1 foot of horizontal distance
Grade of 15% is commonly used in construction and transportation
Angle of 8.53° indicates a moderate incline
The slope of the road is 0.15, the grade is 15%, and the angle of elevation is approximately 8.53°.
• Slope Formula: Rise over run
• Percentage Grade: Slope × 100%
• Trigonometry: Slope = tan(angle), so angle = arctan(slope)
Slope: A measure of the steepness of a line, calculated as the ratio of vertical change (rise) to horizontal change (run)
Rate of Change: How much the dependent variable (y) changes per unit change in the independent variable (x)
Linear Function: A function whose graph is a straight line, with constant slope
Gradient: The vector pointing in the direction of greatest increase of a function
- Identify points: Locate two distinct points on the line
- Apply formula: Substitute coordinates into \(m = \frac{y_2-y_1}{x_2-x_1}\)
- Calculate: Perform the arithmetic to find the slope value
- Interpret: Determine the meaning of the slope value
- Apply: Use slope relationships to solve geometric problems
• Slope Formula: \(m = \frac{y_2-y_1}{x_2-x_1}\)
• Parallel Lines: \(m_1 = m_2\)
• Perpendicular Lines: \(m_1 \cdot m_2 = -1\)
• Vertical Line: Undefined slope when \(x_1 = x_2\)
• Horizontal Line: Zero slope when \(y_1 = y_2\)
• Angle of Inclination: \(\theta = \arctan(m)\)
Construction, engineering, physics, economics, and data analysis
Example: Road grades, roof pitches, rate of change in business metrics
Analysis: The chart demonstrates how slope calculations are essential in various practical applications.
- Construction: Roof pitch and road gradients
- Engineering: Stress-strain relationships
- Economics: Rate of growth in financial data