Slope-Intercept Form: y = mx + b, where m is the slope and b is the y-intercept. Point-Slope Form: y - y₁ = m(x - x₁) for a line with slope m passing through point (x₁, y₁).
- Start with point-slope form: y - y₁ = m(x - x₁)
- Substitute the known point (x₁, y₁) and slope m
- Expand and simplify to isolate y
- Rewrite in slope-intercept form: y = mx + b
y - y₁ = m(x - x₁)
y - 5 = 3(x - 2)
y - 5 = 3x - 6
y = 3x - 6 + 5
y = 3x - 1
The equation of the line is y = 3x - 1
• Point-Slope Form: y - y₁ = m(x - x₁)
• Algebra: Properly distribute and isolate variables
• Slope-Intercept: Format as y = mx + b
Standard Form: Ax + By = C, where A, B, and C are integers, and A is typically positive. Slope Formula: m = (y₂ - y₁)/(x₂ - x₁)
m = (y₂ - y₁)/(x₂ - x₁)
m = (8 - 2)/(4 - 1) = 6/3 = 2
Using point A(1, 2): y - 2 = 2(x - 1)
y - 2 = 2x - 2
y = 2x - 2 + 2
y = 2x
2x - y = 0
Check: 2(4) - 8 = 8 - 8 = 0 ✓
The equation of the line in standard form is 2x - y = 0
• Slope Formula: m = (y₂ - y₁)/(x₂ - x₁)
• Standard Form: Rearrange to Ax + By = C format
• Verification: Check both points satisfy the equation
Parallel Lines: Lines with the same slope. If two lines are parallel, their slopes are equal: m₁ = m₂
From y = 2x + 5, the slope m = 2
Parallel lines have equal slopes, so m = 2
Using point (3, 1): y - 1 = 2(x - 3)
y - 1 = 2x - 6
y = 2x - 6 + 1
y = 2x - 5
Check: y = 2(3) - 5 = 6 - 5 = 1 ✓
The equation of the parallel line is y = 2x - 5
• Parallel Lines: Equal slopes (m₁ = m₂)
• Point-Slope Form: y - y₁ = m(x - x₁)
• Verification: Substitute the given point to check
Slope (m): Measure of steepness, rise over run: (y₂ - y₁)/(x₂ - x₁)
y-intercept (b): Point where line crosses the y-axis (x = 0)
Parallel Lines: Lines with equal slopes, never intersect
Perpendicular Lines: Lines with slopes that are negative reciprocals (m₁ × m₂ = -1)
- Identify given information: Points, slope, or intercepts
- Choose appropriate form: Slope-intercept, point-slope, or standard
- Substitute known values: Into the chosen form
- Rearrange if needed: Convert between forms as required
- Verify result: Check that given points satisfy the equation
• Slope-Intercept: y = mx + b
• Point-Slope: y - y₁ = m(x - x₁)
• Standard Form: Ax + By = C
• Slope Formula: m = (y₂ - y₁)/(x₂ - x₁)
• Parallel Lines: m₁ = m₂
• Perpendicular Lines: m₁ × m₂ = -1
Perpendicular Lines: Lines whose slopes are negative reciprocals of each other. If m₁ and m₂ are slopes of perpendicular lines, then m₁ × m₂ = -1.
From y = -3x + 4, the slope m₁ = -3
For perpendicular lines: m₁ × m₂ = -1
-3 × m₂ = -1
m₂ = -1/(-3) = 1/3
Using point (2, 5) and slope m₂ = 1/3:
y - 5 = (1/3)(x - 2)
y - 5 = (1/3)x - 2/3
y = (1/3)x - 2/3 + 5
y = (1/3)x - 2/3 + 15/3
y = (1/3)x + 13/3
Check: (-3) × (1/3) = -1 ✓
Check point: y = (1/3)(2) + 13/3 = 2/3 + 13/3 = 15/3 = 5 ✓
The equation of the perpendicular line is y = (1/3)x + 13/3
• Perpendicular Lines: m₁ × m₂ = -1
• Negative Reciprocal: If m₁ = -3, then m₂ = 1/3
• Fraction Arithmetic: Properly handle fractional coefficients
Intercepts: x-intercept is where y = 0, y-intercept is where x = 0. These are the points where the line crosses the axes.
Starting with: 3x - 4y = 12
Isolate y: -4y = -3x + 12
Divide by -4: y = (-3x + 12)/(-4)
y = (3/4)x - 3
In y = (3/4)x - 3, the y-intercept is b = -3
So the y-intercept is at (0, -3)
Set y = 0 in the original equation: 3x - 4(0) = 12
3x = 12
x = 4
So the x-intercept is at (4, 0)
For x-intercept (4, 0): y = (3/4)(4) - 3 = 3 - 3 = 0 ✓
For y-intercept (0, -3): y = (3/4)(0) - 3 = 0 - 3 = -3 ✓
Slope-intercept form: y = (3/4)x - 3
X-intercept: (4, 0)
Y-intercept: (0, -3)
• Form Conversion: Isolate y to convert to slope-intercept
• Intercepts: Set x=0 for y-intercept, y=0 for x-intercept
• Verification: Check intercepts satisfy the original equation
Line: A straight path that extends infinitely in both directions, defined by a linear equation.
Slope (m): The measure of steepness of a line, calculated as rise/run = (y₂ - y₁)/(x₂ - x₁).
y-intercept (b): The point where the line crosses the y-axis (when x = 0).
x-intercept: The point where the line crosses the x-axis (when y = 0).
Parallel Lines: Lines in the same plane that never intersect, having identical slopes.
Perpendicular Lines: Lines that intersect at a right angle (90°), with slopes that are negative reciprocals.
- Find slope from two points: m = (y₂ - y₁)/(x₂ - x₁)
- Write equation with point and slope: y - y₁ = m(x - x₁)
- Convert to slope-intercept form: Solve for y to get y = mx + b
- Convert to standard form: Rearrange to Ax + By = C
- Find intercepts: Set x = 0 for y-intercept, y = 0 for x-intercept
- Identify parallel/perpendicular lines: Compare slopes using m₁ = m₂ (parallel) or m₁ × m₂ = -1 (perpendicular)
• Slope Formula: m = (y₂ - y₁)/(x₂ - x₁)
• Point-Slope Form: y - y₁ = m(x - x₁)
• Slope-Intercept Form: y = mx + b
• Standard Form: Ax + By = C (where A is typically positive)
• Parallel Lines: m₁ = m₂
• Perpendicular Lines: m₁ × m₂ = -1
• Horizontal Line: y = k (slope = 0)
• Vertical Line: x = k (slope undefined)
Simple: Find equation of line through (0, 3) with slope 2 → y = 2x + 3
Intermediate: Find equation of line through (1, 4) and (3, 10) → First find slope m = 3, then y = 3x + 1
Advanced: Find equation of line through (2, -1) perpendicular to 2x + 3y = 6 → Convert reference to y = (-2/3)x + 2, find perp slope 3/2, then y = (3/2)x - 4