Solved Exercises on Slope Formula in Grade 8

Master the slope formula: calculating slopes between points, parallel and perpendicular lines, applications in coordinate geometry through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Basic Slope Calculation
Exercise 1
Find the slope of the line passing through points A(2, 3) and B(5, 7)
Definition:

Slope formula: The slope (m) of a line passing through points (x₁, y₁) and (x₂, y₂) is given by m = (y₂ - y₁)/(x₂ - x₁)

Rise over Run: Slope = vertical change/horizontal change

Slope calculation method:
  1. Identify coordinates: (x₁, y₁) and (x₂, y₂)
  2. Apply the slope formula: m = (y₂ - y₁)/(x₂ - x₁)
  3. Calculate the numerator and denominator separately
  4. Simplify the fraction if possible
Points
A(2,3), B(5,7)
Formula
m = (y₂-y₁)/(x₂-x₁)
Result
m = 4/3
Step 1: Identify coordinates

Point A: (x₁, y₁) = (2, 3)

Point B: (x₂, y₂) = (5, 7)

Step 2: Apply the slope formula

m = (y₂ - y₁)/(x₂ - x₁)

m = (7 - 3)/(5 - 2)

Step 3: Calculate numerator and denominator

Numerator: y₂ - y₁ = 7 - 3 = 4

Denominator: x₂ - x₁ = 5 - 2 = 3

Step 4: Compute the slope

m = 4/3 ≈ 1.33

The slope of line AB is m = 4/3
Final answer:

The slope of the line passing through A(2,3) and B(5,7) is m = 4/3

Applied rules:

• Slope Formula: m = (y₂ - y₁)/(x₂ - x₁)

• Order Matters: Subtraction order affects the sign

• Simplification: Reduce fractions when possible

2 Horizontal and Vertical Lines
Exercise 2
Find the slopes of lines CD and EF where C(1, 4), D(6, 4) and E(3, 1), F(3, 8)
Special Cases:

Horizontal Line: Points have same y-coordinate → slope = 0

Vertical Line: Points have same x-coordinate → slope is undefined

Horizontal Line
C(1,4), D(6,4)
Vertical Line
E(3,1), F(3,8)
Results
m₁=0, m₂=undefined
Step 1: Calculate slope of horizontal line CD

C(1, 4), D(6, 4)

m₁ = (4 - 4)/(6 - 1) = 0/5 = 0

Step 2: Calculate slope of vertical line EF

E(3, 1), F(3, 8)

m₂ = (8 - 1)/(3 - 3) = 7/0 = undefined

Step 3: Interpret results

• Horizontal line has slope 0 (flat, no steepness)

• Vertical line has undefined slope (infinite steepness)

m₁ = 0 (horizontal), m₂ = undefined (vertical)
Final answer:

Line CD has slope m = 0 (horizontal line), Line EF has undefined slope (vertical line)

Applied rules:

• Horizontal Line: Same y-coordinates → slope = 0

• Vertical Line: Same x-coordinates → slope undefined

• Division by Zero: Results in undefined slope

3 Negative Slope
Exercise 3
Find the slope of the line passing through G(-2, 5) and H(3, -1)
Negative Slope:

Decreasing Function: As x increases, y decreases

Direction: Line goes downward from left to right

Points
G(-2,5), H(3,-1)
Formula
m = (y₂-y₁)/(x₂-x₁)
Result
m = -6/5
Step 1: Identify coordinates

Point G: (x₁, y₁) = (-2, 5)

Point H: (x₂, y₂) = (3, -1)

Step 2: Apply slope formula

m = (y₂ - y₁)/(x₂ - x₁)

m = (-1 - 5)/(3 - (-2))

Step 3: Calculate numerator and denominator

Numerator: y₂ - y₁ = -1 - 5 = -6

Denominator: x₂ - x₁ = 3 - (-2) = 3 + 2 = 5

Step 4: Compute the slope

m = -6/5 = -1.2

The slope of line GH is m = -6/5
Final answer:

The slope of the line passing through G(-2,5) and H(3,-1) is m = -6/5

Applied rules:

• Negative Slope: Line decreases from left to right

• Sign Handling: Be careful with negative coordinates

• Order of Operations: Handle double negatives correctly

Slope Formula Rules and Properties
\(m = \frac{y_2 - y_1}{x_2 - x_1}\)
Slope Formula
Positive Slope
m > 0
Line rises from left to right
Negative Slope
m < 0
Line falls from left to right
Zero Slope
m = 0
Horizontal line
Undefined Slope
m = undefined
Vertical line
Parallel Lines: Have equal slopes (m₁ = m₂)
Perpendicular Lines: Product of slopes is -1 (m₁ × m₂ = -1)
Steepness: Larger absolute value indicates steeper line
Solution: Exercises 4 to 5
4 Parallel and Perpendicular Lines
Exercise 4
Determine if lines JK and LM are parallel, perpendicular, or neither. J(1,2), K(4,6), L(2,1), M(5,5)
Line Relationships:

Parallel Lines: Same slope, different y-intercepts

Perpendicular Lines: Slopes are negative reciprocals (m₁ × m₂ = -1)

Line JK
m₁ = 4/3
Line LM
m₂ = 4/3
Relationship
Parallel
Step 1: Calculate slope of line JK

J(1, 2), K(4, 6)

m₁ = (6 - 2)/(4 - 1) = 4/3

Step 2: Calculate slope of line LM

L(2, 1), M(5, 5)

m₂ = (5 - 1)/(5 - 2) = 4/3

Step 3: Compare slopes

Since m₁ = m₂ = 4/3, the lines are parallel

Step 4: Verify perpendicularity condition

m₁ × m₂ = (4/3) × (4/3) = 16/9 ≠ -1, so not perpendicular

Lines JK and LM are parallel (m₁ = m₂ = 4/3)
Final answer:

Lines JK and LM are parallel because both have the same slope m = 4/3

Applied rules:

• Parallel Lines: Equal slopes indicate parallelism

• Perpendicular Lines: Product of slopes equals -1

• Verification: Always check both conditions

5 Finding Missing Coordinates
Exercise 5
Find the value of y if the line through P(2, 3) and Q(5, y) has a slope of 2
Using Slope to Find Coordinates:

Given slope and one point: Use slope formula to solve for unknown coordinate

Algebraic manipulation: Rearrange the slope equation

Known Values
P(2,3), m=2
Unknown
Q(5,y)
Solution
y = 9
Step 1: Set up the slope equation

P(2, 3), Q(5, y), slope m = 2

m = (y - 3)/(5 - 2) = 2

Step 2: Solve for y

(y - 3)/3 = 2

y - 3 = 6

Step 3: Isolate y

y = 6 + 3 = 9

Step 4: Verify the result

Check: m = (9 - 3)/(5 - 2) = 6/3 = 2 ✓

y = 9, so Q(5, 9)
Final answer:

The value of y is 9, so point Q is at (5, 9)

Applied rules:

• Substitution: Plug known values into slope formula

• Algebraic Manipulation: Solve for unknown variable

• Verification: Always check your answer

Slope Formula Laws, Methods, Definitions
\(m = \frac{\text{rise}}{\text{run}} = \frac{y_2 - y_1}{x_2 - x_1}\)
Slope Formula
Key definitions:

Slope: Measure of steepness of a line, ratio of vertical change to horizontal change

Rise: Vertical change between two points (y₂ - y₁)

Run: Horizontal change between two points (x₂ - x₁)

Gradient: Another term for slope in some contexts

Complete methodology:
  1. Identify Points: Locate coordinates of two points on the line
  2. Assign Coordinates: Label as (x₁, y₁) and (x₂, y₂)
  3. Apply Formula: Substitute values into m = (y₂ - y₁)/(x₂ - x₁)
  4. Calculate: Perform arithmetic operations carefully
  5. Interpret: Determine if positive, negative, zero, or undefined
Tip 1: Remember "rise over run" - vertical change divided by horizontal change.
Tip 2: Order matters! Subtract consistently (y₂ - y₁) over (x₂ - x₁).
Tip 3: Positive slope means line rises; negative slope means line falls.
Tip 4: Always check if the fraction can be simplified.
Tip 5: For parallel lines, slopes are equal; for perpendicular lines, slopes multiply to -1.
Common errors: Mixing up x and y coordinates, incorrect order of subtraction, forgetting sign rules.
Exam preparation: Practice with various coordinate combinations, memorize relationships between parallel/perpendicular lines.
Formulas to know by heart:

• Slope formula: \(m = \frac{y_2 - y_1}{x_2 - x_1}\)

• Parallel lines: \(m_1 = m_2\)

• Perpendicular lines: \(m_1 \times m_2 = -1\)

• Horizontal line: \(m = 0\)

• Vertical line: \(m = \text{undefined}\)

Applications of Slope Formula
Real-World Applications
The slope formula has numerous applications in real life:
• Rate of change in business (profit vs time)
• Speed calculations in physics (distance vs time)
• Economic trends (price vs demand)
• Engineering (gradient of roads, inclines)

Analysis: The chart demonstrates how slope represents rate of change in various contexts.

  • Positive slope: Increasing trend (profit growth)
  • Negative slope: Decreasing trend (population decline)
  • Zero slope: No change (constant price)
  • Steeper slope: Faster rate of change

Questions & Answers

Question: Why does the order matter when calculating slope? Why can't I just subtract in any order?

Answer: Great question! The order is crucial because slope represents direction and steepness:

  • The slope formula is: m = (y₂ - y₁)/(x₂ - x₁)
  • You must subtract the coordinates of the same point consistently
  • If you mix up the order, you'll get the negative of the correct slope

Example: For points A(1,2) and B(3,6), the correct slope is:

m = (6-2)/(3-1) = 4/2 = 2

But if you mix up the order: m = (6-2)/(1-3) = 4/(-2) = -2

This gives the opposite slope, which would represent a line going in the opposite direction!

Question: How do I know if two lines are perpendicular just by looking at their slopes?

Answer: Two lines are perpendicular if and only if the product of their slopes equals -1:

  • If line 1 has slope m₁ and line 2 has slope m₂, then they're perpendicular if: m₁ × m₂ = -1
  • This means one slope is the negative reciprocal of the other
  • Special case: If one line is horizontal (slope = 0), the perpendicular line is vertical (undefined slope)

Examples:

  • Slopes 2 and -1/2: 2 × (-1/2) = -1 → perpendicular
  • Slopes 3 and -3: 3 × (-3) = -9 ≠ -1 → not perpendicular
  • Slopes -4 and 1/4: -4 × (1/4) = -1 → perpendicular

Question: What's the difference between slope and gradient? Are they the same thing?

Answer: In basic geometry and algebra, "slope" and "gradient" often refer to the same concept - the measure of steepness of a line.

However, there are subtle differences in context:

  • Slope: Primarily used in 2D coordinate geometry (lines on a plane)
  • Gradient: More commonly used in calculus and advanced mathematics, especially for curves and surfaces
  • Both represent the same mathematical concept: rise over run or rate of change

For your grade level, you can consider them interchangeable. The formula remains: m = (y₂ - y₁)/(x₂ - x₁)

In more advanced math, gradient becomes a vector concept, but for now, think of them as the same idea!