Solved Exercises on Real-world Problem Solving in Grade 9

Master real-world problem solving: area optimization, volume calculations, geometric modeling, and practical applications through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Landscaping Project
Exercise 1
A rectangular garden has a length that is 3 meters longer than its width. If the area of the garden is 40 square meters, what are the dimensions of the garden? Also, calculate the amount of fencing needed to enclose the garden.
Definitions:

Area of rectangle: A = length × width

Perimeter of rectangle: P = 2(length + width)

Solution method:
  1. Define variables for the unknown dimensions
  2. Write an equation based on the given relationship
  3. Write an equation based on the given area
  4. Solve the system of equations
  5. Calculate additional measurements as requested
  6. Verify the solution in the context of the problem
Define
w = width, l = w+3
Equation
w(w+3) = 40
Solution
w = 5m, l = 8m
Step 1: Define variables

Let w = width of the garden (in meters)

Then length = w + 3 (since length is 3 meters longer than width)

Step 2: Write the area equation

Area = length × width = 40

(w + 3) × w = 40

w² + 3w = 40

Step 3: Rearrange to standard form

w² + 3w - 40 = 0

Step 4: Factor the quadratic equation

Need two numbers that multiply to -40 and add to 3

These numbers are 8 and -5

(w + 8)(w - 5) = 0

Step 5: Solve for w

w + 8 = 0 or w - 5 = 0

w = -8 or w = 5

Since width cannot be negative, w = 5 meters

Step 6: Find the length

Length = w + 3 = 5 + 3 = 8 meters

Step 7: Calculate the perimeter (fencing needed)

Perimeter = 2(length + width) = 2(8 + 5) = 2(13) = 26 meters

Step 8: Verify the solution

Area = 8 × 5 = 40 square meters ✓

Length is 3 meters longer than width: 8 = 5 + 3 ✓

Dimensions: 5m × 8m, Fencing needed: 26m
Final answer:

The garden is 5 meters wide and 8 meters long. 26 meters of fencing is needed to enclose it.

Applied rules:

• Algebraic modeling: Translate word problems into equations

• Quadratic factoring: Find factors that satisfy the equation

• Reality check: Reject negative solutions for physical measurements

TIP: Always define your variables clearly and check that your answer makes sense in the real-world context.
2 Packaging Optimization
Exercise 2
A company wants to design a cylindrical container to hold 500 cubic centimeters of liquid. The cost of material for the top and bottom is $0.05 per square centimeter, and the cost for the curved side is $0.03 per square centimeter. Find the dimensions that minimize the total cost.
Definition:

Volume of cylinder: V = πr²h

Surface area of cylinder: SA = 2πr² + 2πrh

Given
V = 500cm³
Cost Function
C = 0.1πr² + 0.06πrh
Optimal Values
r ≈ 4.30cm, h ≈ 8.60cm
Step 1: Set up the constraint equation

Volume constraint: πr²h = 500

Therefore: h = 500/(πr²)

Step 2: Write the cost function

Top and bottom area = 2πr²

Curved side area = 2πrh

Cost = (area of top and bottom × cost per cm²) + (area of side × cost per cm²)

C = (2πr² × $0.05) + (2πrh × $0.03)

C = 0.1πr² + 0.06πrh

Step 3: Substitute the constraint into the cost function

C = 0.1πr² + 0.06πr × (500/(πr²))

C = 0.1πr² + 30/r

Step 4: Find the minimum by taking the derivative

dC/dr = 0.2πr - 30/r²

Set dC/dr = 0: 0.2πr - 30/r² = 0

0.2πr = 30/r²

0.2πr³ = 30

r³ = 30/(0.2π) = 150/π

r = ∛(150/π) ≈ 4.30 cm

Step 5: Find the corresponding height

h = 500/(πr²) = 500/(π × (4.30)²) ≈ 8.60 cm

Step 6: Verify this is a minimum

d²C/dr² = 0.2π + 60/r³

Since r > 0, d²C/dr² > 0, confirming this is a minimum

r ≈ 4.30cm, h ≈ 8.60cm
Final answer:

The optimal dimensions are radius ≈ 4.30 cm and height ≈ 8.60 cm.

Applied rules:

• Optimization: Use calculus to find minimum values

• Constraint substitution: Replace one variable using the constraint

• Derivative test: Use second derivative to confirm minimum

TIP: In optimization problems, always express the function in terms of one variable using the constraint.
3 Building Design
Exercise 3
A rectangular building has a volume of 1200 cubic meters. The length is twice the width, and the height is 3 meters less than the width. Find the dimensions of the building and calculate the total surface area.
Definition:

Volume of rectangular prism: V = length × width × height

Surface area of rectangular prism: SA = 2(lw + lh + wh)

Define
w = width, l = 2w, h = w-3
Equation
2w²(w-3) = 1200
Solution
w = 10m, l = 20m, h = 7m
Step 1: Define variables based on relationships

Let w = width of the building

Then length = 2w (length is twice the width)

And height = w - 3 (height is 3 meters less than width)

Step 2: Write the volume equation

Volume = length × width × height = 1200

(2w) × w × (w - 3) = 1200

2w²(w - 3) = 1200

2w³ - 6w² = 1200

Step 3: Rearrange to standard form

2w³ - 6w² - 1200 = 0

w³ - 3w² - 600 = 0

Step 4: Solve the cubic equation

We can try integer factors of 600: 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 20, 25, 30, 40, 50, 60, 75, 100, 120, 150, 200, 300, 600

Testing w = 10: 10³ - 3(10²) - 600 = 1000 - 300 - 600 = 100 ≠ 0

Actually, let's solve: w³ - 3w² - 600 = 0

By trial and error or factoring techniques: w = 10 is indeed a solution

10³ - 3(10²) - 600 = 1000 - 300 - 600 = 100 ≠ 0

Let me recalculate: 2w³ - 6w² = 1200

w³ - 3w² = 600

w²(w - 3) = 600

Try w = 10: 100(10 - 3) = 100(7) = 700 ≠ 600

Try w = 12: 144(12 - 3) = 144(9) = 1296 ≠ 600

Try w = 9: 81(9 - 3) = 81(6) = 486 ≠ 600

Try w = 10.8: (10.8)²(10.8 - 3) ≈ 116.64 × 7.8 ≈ 909.8 ≠ 600

Let's solve more systematically: w²(w - 3) = 600

Using numerical methods or factoring: w ≈ 10.42

Actually, let's try w = 10 again: 2w²(w - 3) = 2(100)(7) = 1400 ≠ 1200

Try w = 9: 2(81)(6) = 972 ≠ 1200

Try w = 9.5: 2(90.25)(6.5) = 1173.25 ≈ 1200

Try w = 9.6: 2(92.16)(6.6) = 1216.512 ≈ 1200

Try w = 9.55: 2(91.2025)(6.55) ≈ 1194.7 ≈ 1200

So w ≈ 9.55 meters

Step 5: Recalculate with exact solution

Actually, let's solve: 2w²(w - 3) = 1200

w²(w - 3) = 600

w³ - 3w² - 600 = 0

By numerical methods: w ≈ 10.00 (checking: 10³ - 3(10²) - 600 = 1000 - 300 - 600 = 100, not zero)

Let's adjust: We need w³ - 3w² = 600

Try w = 10: 1000 - 300 = 700 (too big)

Try w = 9: 729 - 243 = 486 (too small)

Try w = 9.5: 857.375 - 270.75 = 586.625 (close)

Try w = 9.6: 884.736 - 276.48 = 608.256 (slightly over)

So w ≈ 9.55 meters

For simplicity, let's assume w = 10 and adjust the volume: 2(100)(7) = 1400, not 1200

So our equation is 2w²(w - 3) = 1200, or w²(w - 3) = 600

Let's say w = 10 gives 100×7 = 700, too big

w = 9 gives 81×6 = 486, too small

w = 9.3 gives 86.49×6.3 = 544.887, still too small

w = 9.4 gives 88.36×6.4 = 565.504, still too small

w = 9.5 gives 90.25×6.5 = 586.625, close

w = 9.55 gives 91.2025×6.55 = 597.376, very close

w = 9.56 gives 91.3936×6.56 = 600.442, very close to 600

So w ≈ 9.56 meters

Step 6: Calculate dimensions

Width w ≈ 9.56 meters

Length l = 2w ≈ 2(9.56) = 19.12 meters

Height h = w - 3 ≈ 9.56 - 3 = 6.56 meters

Step 7: Calculate surface area

SA = 2(lw + lh + wh)

SA = 2(19.12×9.56 + 19.12×6.56 + 9.56×6.56)

SA = 2(182.78 + 125.42 + 62.70) = 2(370.90) = 741.80 square meters

w ≈ 9.56m, l ≈ 19.12m, h ≈ 6.56m, SA ≈ 741.80m²
Final answer:

The building dimensions are approximately width = 9.56m, length = 19.12m, height = 6.56m. The surface area is approximately 741.80 square meters.

Applied rules:

• Systematic substitution: Express all variables in terms of one variable

• Algebraic manipulation: Solve complex equations step by step

• Approximation techniques: Use numerical methods for non-integer solutions

TIP: When solving cubic equations, try integer factors first, then use approximation methods for non-integer solutions.
Real-world Problem Solving Fundamentals
\(\text{Cost} = \sum (\text{Area}_i \times \text{Price}_i)\)
Cost Optimization
Volume
\(V_{rect} = lwh\)
Rectangular prism
Surface Area
\(SA_{rect} = 2(lw + lh + wh)\)
Rectangular prism
Cylinder
\(V_{cyl} = \pi r^2 h\)
Volume
Key definitions:

Real-world problem solving: Applying mathematical concepts and techniques to solve practical problems encountered in everyday life, business, or engineering contexts

Mathematical modeling: Creating mathematical representations of real situations to analyze and solve problems

Optimization: Finding the best solution among available alternatives, often involving maximizing benefits or minimizing costs

Constraint: A limitation or requirement that must be satisfied in the solution

Real-world Problem Solving Process:
  1. Understand the problem: Read carefully and identify what is being asked
  2. Identify given information: List all known quantities and relationships
  3. Define variables: Assign symbols to unknown quantities
  4. Translate to math: Create equations representing the situation
  5. Solve mathematically: Use appropriate mathematical techniques
  6. Interpret results: Translate mathematical solution back to real-world context
  7. Verify reasonableness: Check if the solution makes sense practically
Tip 1: Always check that your units are consistent throughout the problem.
Tip 2: Draw diagrams to visualize the problem and identify relationships.
Tip 3: Consider the practical meaning of your solution (e.g., no negative lengths).
Tip 4: Round your final answer appropriately for the context.
Common errors: Incorrect unit conversions, ignoring constraints, arithmetic mistakes, unrealistic solutions.
Exam preparation: Practice various problem types, focus on the setup phase, verify solutions.
Essential Problem-Solving Principles:

• Modeling: Convert real situations into mathematical forms

• Abstraction: Focus on relevant features while ignoring unnecessary details

• Verification: Always check that solutions make practical sense

• Communication: Express results clearly in the context of the original problem

• Efficiency: Choose the most appropriate mathematical method for the problem

Common Applications:

Construction: Calculating materials needed, determining dimensions

Manufacturing: Optimizing packaging, minimizing costs

Architecture: Space planning, structural calculations

Engineering: Design optimization, resource allocation

Business: Cost analysis, profit maximization

Solution: Exercises 4 to 5
4 Water Tank Design
Exercise 4
A water tank is shaped like a rectangular prism with a square base. The tank needs to hold 2000 liters of water. If the height of the tank is 2 meters, find the dimensions of the base. The material costs $8 per square meter for the base and $5 per square meter for the sides. Calculate the total cost of materials.
Definition:

Volume conversion: 1000 liters = 1 cubic meter

Rectangular prism with square base: V = s²h, where s is side length of base

Given
V = 2000L = 2m³, h = 2m
Base side
s = 1m
Cost
$34
Step 1: Convert volume to consistent units

2000 liters = 2000/1000 = 2 cubic meters

Step 2: Set up the volume equation

For a rectangular prism with square base: V = s²h

Where s = side length of square base, h = height

2 = s² × 2

Step 3: Solve for the base dimensions

2 = 2s²

s² = 1

s = 1 meter

So the base is 1m × 1m

Step 4: Calculate the area of each surface

Base area = s² = 1² = 1 square meter

Four identical sides, each with area = s × h = 1 × 2 = 2 square meters

Total side area = 4 × 2 = 8 square meters

Step 5: Calculate the cost of materials

Base cost = Base area × Cost per sq meter = 1 × $8 = $8

Sides cost = Side area × Cost per sq meter = 8 × $5 = $40

Total cost = $8 + $40 = $48

Step 6: Verify the solution

Volume = 1² × 2 = 2 cubic meters = 2000 liters ✓

Total cost calculation is correct ✓

Base: 1m × 1m, Total cost: $48
Final answer:

The base of the tank is 1 meter by 1 meter, and the total cost of materials is $48.

Applied rules:

• Unit conversion: Convert liters to cubic meters for consistency

• Volume formula: Apply correct formula for the shape

• Cost calculation: Multiply area by cost per unit area

TIP: Always convert all measurements to the same units before performing calculations.
5 Playground Planning
Exercise 5
A city plans to build a playground with a rectangular area surrounded by a walking path. The playground area is 150 square meters, and the path is 2 meters wide all around. If the total area (playground + path) is 350 square meters, find the dimensions of the playground and the outer dimensions including the path. Calculate the area of the walking path.
Definition:

Area of rectangle: A = length × width

Path around rectangle: Adds 2 × path width to each dimension

Playground
l × w = 150
Total Area
(l+4)(w+4) = 350
Solution
l = 15m, w = 10m
Step 1: Define variables for playground dimensions

Let l = length of playground, w = width of playground

Given: lw = 150 (playground area)

Step 2: Determine the outer dimensions

The path is 2 meters wide all around

Outer length = l + 2(2) = l + 4

Outer width = w + 2(2) = w + 4

Step 3: Write the total area equation

Total area = Outer length × Outer width = 350

(l + 4)(w + 4) = 350

Step 4: Expand the equation

lw + 4l + 4w + 16 = 350

Since lw = 150: 150 + 4l + 4w + 16 = 350

4l + 4w = 184

l + w = 46

Step 5: Solve the system of equations

We have: lw = 150 and l + w = 46

From the second equation: w = 46 - l

Substituting into the first: l(46 - l) = 150

46l - l² = 150

l² - 46l + 150 = 0

Step 6: Solve the quadratic equation

Using the quadratic formula: l = (46 ± √(46² - 4(1)(150)))/2

l = (46 ± √(2116 - 600))/2 = (46 ± √1516)/2 = (46 ± 38.94)/2

l = (46 + 38.94)/2 ≈ 42.47 or l = (46 - 38.94)/2 ≈ 3.53

Step 7: Find the corresponding widths

If l ≈ 42.47, then w ≈ 46 - 42.47 ≈ 3.53

If l ≈ 3.53, then w ≈ 46 - 3.53 ≈ 42.47

So the playground dimensions are approximately 42.47m × 3.53m

Step 8: Calculate outer dimensions and path area

Outer dimensions: (42.47 + 4) × (3.53 + 4) = 46.47m × 7.53m

Path area = Total area - Playground area = 350 - 150 = 200 square meters

Playground: 42.47m × 3.53m, Path area: 200m²
Final answer:

The playground is approximately 42.47 meters by 3.53 meters. The area of the walking path is 200 square meters.

Applied rules:

• System of equations: Solve two equations with two unknowns

• Area addition: Total area includes both playground and path

• Dimension adjustment: Path adds to all sides of the inner rectangle

TIP: When a path surrounds a rectangle, it adds twice the path width to each dimension.
Detailed Summary: Real-world Problem Solving
\(\text{Total Area} = \text{Inner Area} + \text{Path Area}\)
Area Relationships
Comprehensive Definitions:

Mathematical modeling: The process of creating mathematical representations of real-world situations to analyze and solve problems. It involves identifying key variables, establishing relationships, and using mathematical techniques to find solutions.

Constraints: Limitations or requirements that must be satisfied in a problem. These could be physical limitations, budget constraints, time limits, or other practical restrictions.

Optimization: The process of finding the best solution according to a specified objective, such as maximizing profit, minimizing cost, or achieving the most efficient use of resources.

Systems of equations: A set of equations with multiple variables that must be solved simultaneously. Often arise in real-world problems with multiple constraints.

Problem-Solving Framework:
  1. Problem identification: Clearly understand what is being asked and what information is provided
  2. Variable definition: Assign mathematical symbols to unknown quantities
  3. Relationship establishment: Create equations based on given information and geometric principles
  4. Mathematical solution: Apply appropriate mathematical techniques to solve the equations
  5. Solution interpretation: Translate mathematical results back to the real-world context
  6. Verification: Check that the solution makes sense and satisfies all constraints
Tip 1: Always draw a diagram to visualize the problem and label all known and unknown quantities.
Tip 2: Make sure all units are consistent before performing calculations.
Tip 3: Consider whether your answer is realistic in the context of the problem.
Tip 4: Check that your solution satisfies all the conditions given in the problem.
Tip 5: When solving optimization problems, verify that you found a maximum or minimum as required.
Common errors: Unit inconsistencies, algebraic mistakes, ignoring constraints, unrealistic solutions, calculation errors.
Memorization aids: "Draw, Define, Equation, Solve, Interpret, Verify" (DDESIV), "Units must match", "Check reasonableness".
Geometric Formulas for Applications:

• Rectangle: Area = lw, Perimeter = 2(l + w)

• Circle: Area = πr², Circumference = 2πr

• Cylinder: Volume = πr²h, Surface Area = 2πr² + 2πrh

• Rectangular Prism: Volume = lwh, Surface Area = 2(lw + lh + wh)

• Triangle: Area = ½bh, Pythagorean Theorem: a² + b² = c²

Problem Types:

Area optimization: Finding dimensions that maximize or minimize area under constraints

Volume calculations: Determining capacity or material requirements

Cost minimization: Finding the most economical solution

Space planning: Arranging objects efficiently within given constraints

Mixture problems: Combining different elements in optimal proportions

Verification Strategies:

• Unit check: Ensure all calculations use consistent units

• Reasonableness check: Verify the answer makes sense in context

• Constraint check: Confirm all given conditions are satisfied

• Calculation check: Recompute critical steps to avoid errors

• Alternative method: Solve using a different approach to confirm

Questions & Answers

Question: I often struggle with setting up equations for real-world problems. How do I translate the words into mathematical expressions?

Answer: Here's a systematic approach to translate word problems into equations:

  1. Read carefully: Identify what you're looking for and what's given
  2. Define variables: Assign letters to unknown quantities
  3. Identify relationships: Look for phrases like "is equal to," "more than," "product of," "sum of"
  4. Translate phrases: "more than" → addition, "less than" → subtraction, "product" → multiplication, "quotient" → division
  5. Set up equations: Use geometric formulas, physical relationships, or logical connections

Common translations:

  • "A is 3 more than B" → A = B + 3
  • "The product of A and B is 20" → A × B = 20
  • "A exceeds B by 5" → A = B + 5
  • "A is half of B" → A = B/2

Practice identifying key phrases and their mathematical equivalents.

Question: When solving optimization problems, how do I know if I found a maximum or minimum?

Answer: There are several ways to determine if you found a maximum or minimum:

  1. Second derivative test: If f"(x) > 0, it's a minimum; if f"(x) < 0, it's a maximum
  2. Context analysis: Consider the practical meaning (cost minimization, area maximization)
  3. Endpoint comparison: Compare the critical point value with endpoint values if applicable
  4. Behavior analysis: Examine how the function behaves as variables approach boundaries

For example, in cost minimization problems, you're usually looking for a minimum. In area maximization problems, you're looking for a maximum.

You can also test values slightly above and below your critical point to see how the function changes.

Question: I sometimes get unrealistic answers like negative dimensions. How do I avoid this?

Answer: Negative or unrealistic answers often indicate errors in setup or calculation:

  • Check your setup: Ensure equations properly represent the problem situation
  • Verify constraints: Make sure all physical constraints are included
  • Review signs: Check that you've correctly interpreted "more than," "less than," etc.
  • Consider domain restrictions: Some problems require positive-only solutions
  • Verify calculations: Recheck algebraic manipulations

Always perform a reality check: "Does this answer make sense in the context of the problem?"

For geometric problems, lengths, areas, and volumes must be positive.

Question: How important is it to draw diagrams for real-world problems?

Answer: Drawing diagrams is extremely valuable for real-world problems:

  • Visual representation: Helps you understand spatial relationships
  • Variable identification: Makes it clear what dimensions you're working with
  • Formula selection: Helps you choose the correct geometric formulas
  • Error prevention: Makes it easier to spot mistakes in setup
  • Communication: Helps others (and future you) understand your approach

Even a simple sketch can clarify complex relationships. The diagram doesn't need to be perfectly accurate, just representative of the situation.

For 3D problems, drawing multiple views (top, side, front) can be especially helpful.

Question: How do I know if my final answer is reasonable for the real-world context?

Answer: Here are ways to assess reasonableness:

  1. Unit consistency: Check that your answer has the expected units
  2. Magnitude check: Does the size make sense? (A room 0.5m wide is too small)
  3. Sign check: Physical quantities like length, area, volume should be positive
  4. Proportion check: Do relationships seem logical? (A pool shouldn't hold 1 million liters)
  5. Estimation: Do a quick mental calculation to see if your answer is in the right ballpark

Develop a sense of typical values: room dimensions in meters, building heights in meters, liquid volumes in appropriate units.

Always ask yourself: "Would this work in the real world?"