Solved Exercises on Composite Solids in Grade 10

Master composite solids: volume, surface area, combinations of cylinders, cones, spheres, and prisms through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Cylinder + Hemisphere
Exercise 1
A solid consists of a cylinder of radius 4 cm and height 10 cm topped by a hemisphere of the same radius. Find the total volume.
Definition:

Composite solid: A solid formed by combining two or more basic geometric solids.

Cylinder volume: \(V_{\text{cylinder}} = \pi r^2 h\)

Hemisphere volume: \(V_{\text{hemisphere}} = \frac{2}{3}\pi r^3\)

Volume calculation method:
  1. Identify the individual components of the composite solid
  2. Calculate the volume of each component separately
  3. Add the volumes together to get the total volume
Cylinder Volume
\(V_c = \pi r^2 h\)
Hemisphere Volume
\(V_h = \frac{2}{3}\pi r^3\)
Total Volume
\(V_t = V_c + V_h\)
Step 1: Calculate cylinder volume

\(V_{\text{cylinder}} = \pi r^2 h = \pi \times 4^2 \times 10 = 160\pi \text{ cm}^3\)

Step 2: Calculate hemisphere volume

\(V_{\text{hemisphere}} = \frac{2}{3}\pi r^3 = \frac{2}{3}\pi \times 4^3 = \frac{2}{3}\pi \times 64 = \frac{128}{3}\pi \text{ cm}^3\)

Step 3: Calculate total volume

\(V_{\text{total}} = 160\pi + \frac{128}{3}\pi = \frac{480\pi + 128\pi}{3} = \frac{608\pi}{3} \text{ cm}^3\)

Total volume = \(\frac{608\pi}{3} \approx 636.7 \text{ cm}^3\)
Final answer:

The total volume of the composite solid is \(\frac{608\pi}{3}\) cm³ or approximately 636.7 cm³.

Applied rules:

• Volume addition: For composite solids, volumes of components are additive

• Formula application: Use appropriate volume formulas for each component

• Unit consistency: Ensure all measurements are in the same units

Tip: When combining shapes, make sure their dimensions match where they connect.
Warning: Don't forget to subtract overlapping areas when calculating surface area!
2 Cone + Cylinder
Exercise 2
A solid consists of a cone of radius 3 cm and height 4 cm attached to the top of a cylinder of the same radius and height 8 cm. Find the total surface area.
Definition:

Surface area: Sum of all exposed surfaces of a solid

Cone lateral surface: \(A_{\text{cone}} = \pi r l\) where \(l\) is the slant height

Cylinder lateral surface: \(A_{\text{cylinder}} = 2\pi r h\)

Slant Height
\(l = \sqrt{r^2 + h^2}\)
Cone Surface
\(A_c = \pi r l\)
Cylinder Surface
\(A_{cy} = 2\pi r h + \pi r^2\)
Step 1: Calculate slant height of cone

\(l = \sqrt{r^2 + h^2} = \sqrt{3^2 + 4^2} = \sqrt{9 + 16} = \sqrt{25} = 5 \text{ cm}\)

Step 2: Calculate cone surface area

\(A_{\text{cone}} = \pi r l = \pi \times 3 \times 5 = 15\pi \text{ cm}^2\)

Step 3: Calculate cylinder surface area

Since the cone sits on top of the cylinder, we exclude the top base of the cylinder.

\(A_{\text{cylinder}} = 2\pi r h + \pi r^2 = 2\pi \times 3 \times 8 + \pi \times 3^2 = 48\pi + 9\pi = 57\pi \text{ cm}^2\)

Step 4: Calculate total surface area

\(A_{\text{total}} = A_{\text{cone}} + A_{\text{cylinder}} = 15\pi + 57\pi = 72\pi \text{ cm}^2\)

Total surface area = \(72\pi \approx 226.2 \text{ cm}^2\)
Final answer:

The total surface area of the composite solid is \(72\pi\) cm² or approximately 226.2 cm².

Applied rules:

• Surface area exclusion: Surfaces that join two components are not counted twice

• Slant height calculation: Use Pythagorean theorem for cones

• Component identification: Carefully identify which surfaces are exposed

Tip: Draw a diagram to visualize which surfaces are internal vs. external.
Warning: Internal joining surfaces are not part of the total surface area!
3 Cube with Cylindrical Hole
Exercise 3
A cube of side length 10 cm has a cylindrical hole of radius 2 cm drilled through its center. Find the remaining volume.
Definition:

Subtractive composite solid: A solid with parts removed from it

Cube volume: \(V_{\text{cube}} = s^3\)

Cylinder volume: \(V_{\text{cylinder}} = \pi r^2 h\)

Cube Volume
\(V_{\text{cube}} = s^3\)
Cylinder Volume
\(V_{\text{cylinder}} = \pi r^2 h\)
Remaining Volume
\(V_{\text{remaining}} = V_{\text{cube}} - V_{\text{cylinder}}\)
Step 1: Calculate cube volume

\(V_{\text{cube}} = s^3 = 10^3 = 1000 \text{ cm}^3\)

Step 2: Calculate cylinder volume

The cylinder goes through the full height of the cube, so \(h = 10\) cm.

\(V_{\text{cylinder}} = \pi r^2 h = \pi \times 2^2 \times 10 = 40\pi \text{ cm}^3\)

Step 3: Calculate remaining volume

\(V_{\text{remaining}} = V_{\text{cube}} - V_{\text{cylinder}} = 1000 - 40\pi \text{ cm}^3\)

Step 4: Calculate numerical value

\(V_{\text{remaining}} = 1000 - 40\pi \approx 1000 - 40(3.14159) \approx 1000 - 125.66 \approx 874.34 \text{ cm}^3\)

Remaining volume = \(1000 - 40\pi \approx 874.3 \text{ cm}^3\)
Final answer:

The remaining volume after drilling the hole is \(1000 - 40\pi\) cm³ or approximately 874.3 cm³.

Applied rules:

• Volume subtraction: For solids with holes, subtract the hole's volume

• Dimension matching: The height of the cylinder equals the thickness of the cube

• Approximation: Use \(\pi \approx 3.14159\) for decimal results

Tip: For subtractive problems, always subtract the smaller volume from the larger one.
Warning: Be careful about the dimensions of the hole relative to the solid!
Volume and Surface Area Formulas
\(V = \pi r^2 h\)
Cylinder Volume
\(SA = 2\pi r h + 2\pi r^2\)
Cylinder Surface Area
\(V = \frac{1}{3}\pi r^2 h\)
Cone Volume
\(SA = \pi r l + \pi r^2\)
Cone Surface Area
\(V = \frac{4}{3}\pi r^3\)
Sphere Volume
\(SA = 4\pi r^2\)
Sphere Surface Area
\(V = s^3\)
Cube Volume
\(SA = 6s^2\)
Cube Surface Area
Hemisphere Volume
\(V = \frac{2}{3}\pi r^3\)
Hemisphere SA
\(SA = 3\pi r^2\)
Slant Height
\(l = \sqrt{r^2 + h^2}\)
Key Property: When two solids are joined, the joining surface is not counted in the total surface area.
Key Property: For composite volumes, add volumes of individual components.
Key Property: For subtractive solids, subtract the removed volume from the original.
Tip: Always draw a diagram to visualize the composite solid.
Tip: Check that dimensions match where components join.
Tip: For complex shapes, break them into simpler components.
Solution: Exercises 4 to 5
4 Sphere + Cylinder
Exercise 4
A solid consists of a sphere of radius 3 cm attached to the top of a cylinder of radius 3 cm and height 5 cm. Find the total volume and surface area.
Definition:

Sphere volume: \(V_{\text{sphere}} = \frac{4}{3}\pi r^3\)

Sphere surface area: \(SA_{\text{sphere}} = 4\pi r^2\)

Sphere Volume
\(V_s = \frac{4}{3}\pi r^3\)
Cylinder Volume
\(V_c = \pi r^2 h\)
Total Volume
\(V_t = V_s + V_c\)
Step 1: Calculate sphere volume

\(V_{\text{sphere}} = \frac{4}{3}\pi r^3 = \frac{4}{3}\pi \times 3^3 = \frac{4}{3}\pi \times 27 = 36\pi \text{ cm}^3\)

Step 2: Calculate cylinder volume

\(V_{\text{cylinder}} = \pi r^2 h = \pi \times 3^2 \times 5 = 45\pi \text{ cm}^3\)

Step 3: Calculate total volume

\(V_{\text{total}} = 36\pi + 45\pi = 81\pi \text{ cm}^3\)

Step 4: Calculate surface area

For the surface area, we consider the curved surface of the cylinder, the bottom base of the cylinder, and half the surface area of the sphere (hemisphere).

\(SA_{\text{cylinder}} = 2\pi r h + \pi r^2 = 2\pi \times 3 \times 5 + \pi \times 3^2 = 30\pi + 9\pi = 39\pi \text{ cm}^2\)

\(SA_{\text{hemisphere}} = 2\pi r^2 = 2\pi \times 3^2 = 18\pi \text{ cm}^2\)

\(SA_{\text{total}} = 39\pi + 18\pi = 57\pi \text{ cm}^2\)

Volume = \(81\pi \approx 254.5 \text{ cm}^3\)
Surface Area = \(57\pi \approx 179.1 \text{ cm}^2\)
Final answer:

The total volume is \(81\pi\) cm³ (≈254.5 cm³) and the total surface area is \(57\pi\) cm² (≈179.1 cm²).

Applied rules:

• Volume addition: Add volumes of individual components

• Surface area exclusion: Don't count the joining circular face

• Component analysis: Only the hemisphere's curved surface is exposed

5 Rectangular Prism with Pyramid Cap
Exercise 5
A rectangular prism with dimensions 6 cm × 4 cm × 3 cm has a square pyramid placed on its top face. The pyramid has a square base of 6 cm × 4 cm and height 5 cm. Find the total volume.
Definition:

Rectangular prism volume: \(V_{\text{prism}} = l \times w \times h\)

Pyramid volume: \(V_{\text{pyramid}} = \frac{1}{3} \times \text{base area} \times \text{height}\)

Prism Volume
\(V_p = lwh\)
Pyramid Volume
\(V_y = \frac{1}{3}Bh\)
Total Volume
\(V_t = V_p + V_y\)
Step 1: Calculate prism volume

\(V_{\text{prism}} = l \times w \times h = 6 \times 4 \times 3 = 72 \text{ cm}^3\)

Step 2: Calculate pyramid base area

The pyramid sits on the top face of the prism, so its base area is the same as the top face of the prism.

\(\text{Base area} = 6 \times 4 = 24 \text{ cm}^2\)

Step 3: Calculate pyramid volume

\(V_{\text{pyramid}} = \frac{1}{3} \times \text{base area} \times \text{height} = \frac{1}{3} \times 24 \times 5 = \frac{120}{3} = 40 \text{ cm}^3\)

Step 4: Calculate total volume

\(V_{\text{total}} = V_{\text{prism}} + V_{\text{pyramid}} = 72 + 40 = 112 \text{ cm}^3\)

Total volume = \(112 \text{ cm}^3\)
Final answer:

The total volume of the composite solid is 112 cm³.

Applied rules:

• Volume addition: Add volumes of all components

• Base matching: Pyramid base matches the top face of the prism

• Pyramid formula: One-third base area times height

Comprehensive Theory: Composite Solids
\(V_{\text{composite}} = \sum V_i\)
Volume Addition Principle
Key definitions:

Composite solid: A three-dimensional shape formed by combining two or more basic geometric solids such as cubes, cylinders, cones, spheres, etc.

Volume: The amount of space occupied by a solid, measured in cubic units.

Surface area: The total area of all exposed surfaces of a solid, measured in square units.

Complete methodology:
  1. Visualize and analyze: Draw the composite solid and identify its components
  2. Label dimensions: Mark all relevant measurements on the diagram
  3. For volume: Simply add the volumes of all components
  4. For surface area: Add surface areas of components but subtract any internal joining faces
  5. Calculate: Use appropriate formulas for each component
  6. Verify: Check that units are consistent and answers are reasonable
Tip 1: When calculating surface area, subtract the areas of faces that are no longer exposed due to joining.
Tip 2: For subtractive solids (like holes), subtract the volume of the removed part.
Tip 3: Always ensure that connecting dimensions (like radii or side lengths) match between components.
Tip 4: Break complex composite solids into simpler recognizable shapes.
Common errors: Forgetting to subtract internal surfaces for surface area, using wrong formulas for specific shapes, mismatched dimensions between components.
Exam preparation: Memorize volume and surface area formulas for basic shapes, practice identifying components in complex solids, work on visualization skills.
Essential formulas to know:

• Cube volume: \(V = s^3\), SA: \(SA = 6s^2\)

• Rectangular prism volume: \(V = lwh\), SA: \(SA = 2(lw + lh + wh)\)

• Cylinder volume: \(V = \pi r^2 h\), SA: \(SA = 2\pi rh + 2\pi r^2\)

• Cone volume: \(V = \frac{1}{3}\pi r^2 h\), SA: \(SA = \pi rl + \pi r^2\)

• Sphere volume: \(V = \frac{4}{3}\pi r^3\), SA: \(SA = 4\pi r^2\)

Hemisphere
\(V = \frac{2}{3}\pi r^3\)
\(SA = 3\pi r^2\)
Pyramid
\(V = \frac{1}{3}Bh\)
where B = base area
Slant Height
\(l = \sqrt{r^2 + h^2}\)
for cones
\(\text{Joining Rule: } SA_{\text{total}} = \sum SA_i - 2 \times \text{joining area}\)
Surface Area Adjustment for Joined Solids
Key Note: When two solids are joined face-to-face, subtract twice the area of the joining face from the total surface area.
Key Note: For hollow or subtractive solids, subtract the volume of the removed portion from the original solid.

Questions & Answers

Question: When calculating the surface area of composite solids, I'm confused about which surfaces to include and which to exclude. Can you explain the rule?

Answer: Great question! The key principle is to count only the surfaces that are externally visible:

  • Count all surfaces that are exposed to the outside environment
  • Do NOT count surfaces that are internal, such as where two solids are joined together
  • When two solids are joined face-to-face, the joining faces are no longer exposed, so subtract their area from the total

For example, if a cone sits on top of a cylinder:

  • You include the curved surface of the cone
  • You include the curved surface of the cylinder
  • You include the bottom base of the cylinder
  • You do NOT include the base of the cone OR the top of the cylinder since they're touching and not visible

The general formula is:
\(SA_{\text{total}} = \sum (\text{surface areas}) - 2 \times (\text{area of joining faces})\)

Always visualize or sketch the composite solid to identify which surfaces remain exposed!

Question: How do I know if I should add or subtract volumes when dealing with composite solids?

Answer: The operation depends on how the shapes interact:

  • Add volumes: When shapes are combined or stacked together (additive composite solids)
  • Subtract volumes: When one shape is removed from another (subtractive composite solids, like holes, cavities)

Examples:

  • A cylinder with a hemispherical cap: \(V_{\text{total}} = V_{\text{cylinder}} + V_{\text{hemisphere}}\)
  • A cube with a cylindrical hole: \(V_{\text{remaining}} = V_{\text{cube}} - V_{\text{cylinder}}\)
  • A rectangular prism with a pyramid on top: \(V_{\text{total}} = V_{\text{prism}} + V_{\text{pyramid}}\)

Look for keywords in the problem:

  • "with," "on top of," "attached to" → usually addition
  • "with a hole," "drilled through," "removed" → subtraction

Remember: Volume is always concerned with the total amount of space the object occupies!

Question: I often make mistakes with the dimensions when composite solids are described. How can I ensure I'm using the right measurements?

Answer: Dimension matching is crucial for accurate calculations. Here are strategies to ensure you use the right measurements:

  • Draw a labeled diagram: Sketch the composite solid and clearly mark all dimensions
  • Identify connection points: Where two solids join, their dimensions must match (same radius, same base dimensions)
  • Read carefully: Look for phrases like "the same radius" or "matching base" to identify equal dimensions
  • Create a dimension table: List each component with its specific measurements

Example: "A cylinder of radius 4cm and height 10cm topped by a hemisphere of the same radius"

  • Cylinder: r = 4cm, h = 10cm
  • Hemisphere: r = 4cm (matches cylinder), height = 4cm (radius of hemisphere)

If dimensions don't match where solids join, you likely misinterpreted the problem. Double-check the description to ensure consistency!