Volume of 3D Figures: Detailed Exercises and Solutions

Master volume calculations: prisms, pyramids, cylinders, cones, and spheres through these 5 comprehensive exercises.

Solution: Exercises 1 to 3
1 Rectangular Prism Volume
Exercise 1
Calculate the volume of a rectangular prism with dimensions 12 cm × 8 cm × 5 cm. Then find the volume of a cube with the same surface area as this rectangular prism. Compare the volumes and explain which has greater capacity. Also calculate how many small cubes of 2 cm edge length can fit inside the rectangular prism.
Given: Rectangular prism: l = 12 cm, w = 8 cm, h = 5 cm
Key Definitions:

Volume: The amount of space inside a three-dimensional figure, measured in cubic units

Rectangular Prism Volume: V = length × width × height

Cube Volume: V = s³ (where s is side length)

Rectangular Prism Surface Area: SA = 2(lw + lh + wh)

Cube Surface Area: SA = 6s²

Capacity: The maximum amount of substance a container can hold

Volume Calculation Method:
  1. Identify the 3D shape and its dimensions
  2. Select the appropriate volume formula
  3. Calculate the surface area of the original shape
  4. Find the side length of a cube with the same surface area
  5. Calculate both volumes for comparison
  6. Use division to find how many small objects fit in the larger object
Prism Volume
V = lwh
Surface Area
SA = 2(lw + lh + wh)
Cube Side
s = √(SA/6)
Step 1: Calculate the volume of the rectangular prism

V = length × width × height = 12 × 8 × 5 = 480 cm³

Step 2: Calculate the surface area of the rectangular prism

SA = 2(lw + lh + wh) = 2(12×8 + 12×5 + 8×5)

SA = 2(96 + 60 + 40) = 2(196) = 392 cm²

Step 3: Find the side length of a cube with the same surface area

For a cube: SA = 6s²

392 = 6s²

s² = 392/6 = 65.33

s = √65.33 ≈ 8.08 cm

Step 4: Calculate the volume of the cube

V_cube = s³ = (8.08)³ ≈ 527.8 cm³

Step 5: Calculate how many small cubes fit in the prism

Volume of small cube = 2³ = 8 cm³

Number of small cubes = Prism Volume ÷ Small Cube Volume

Number = 480 ÷ 8 = 60 small cubes

Step 6: Compare the volumes

Rectangular prism: 480 cm³

Cube with same surface area: ≈527.8 cm³

The cube has greater capacity despite having the same surface area

Prism Volume: 480 cm³
Cube Volume: ≈527.8 cm³
Small Cubes: 60
Cube has greater capacity
Final Answer:

The rectangular prism has a volume of 480 cm³. A cube with the same surface area has a volume of approximately 527.8 cm³, which is larger. A total of 60 small cubes (2 cm edge) can fit inside the rectangular prism.

Applied Rules:

• Volume Formula: V = lwh for rectangular prisms

• Surface Area Conservation: Equal surface areas for comparison

• Optimization Principle: Cubes maximize volume for given surface area

• Division Principle: Number of objects = total volume ÷ individual volume

2 Cylinder Volume
Exercise 2
Calculate the volume of a cylindrical tank with radius 4 meters and height 10 meters. Then find the volume of a cylinder with the same radius but double the height. Explain the relationship between height and volume. Also calculate the volume of a cone with the same base and height as the original cylinder. Finally, determine what percentage of the cylinder's volume the cone occupies.
Given: Cylinder: r = 4 m, h₁ = 10 m, h₂ = 20 m
Key Definitions:

Cylinder Volume: V = πr²h

Cone Volume: V = (1/3)πr²h

Radius: The distance from the center to the edge of the circular base

Height: The perpendicular distance between the bases

Proportional Relationship: How volume changes with dimensional changes

Cylinder Volume
V = πr²h
Cone Volume
V = (1/3)πr²h
Volume Ratio
Cone:Cylinder = 1:3
Step 1: Calculate the volume of the original cylinder

V₁ = πr²h = π × 4² × 10 = π × 16 × 10 = 160π m³

V₁ ≈ 160 × 3.14159 ≈ 502.65 m³

Step 2: Calculate the volume of the cylinder with double height

V₂ = πr²h = π × 4² × 20 = π × 16 × 20 = 320π m³

V₂ ≈ 320 × 3.14159 ≈ 1005.31 m³

Step 3: Analyze the height-volume relationship

When height doubles from 10 m to 20 m, volume doubles from 160π m³ to 320π m³

This shows that volume is directly proportional to height when radius is constant

V ∝ h (when r is constant)

Step 4: Calculate the volume of the cone with same base and height

V_cone = (1/3)πr²h = (1/3) × π × 4² × 10 = (1/3) × π × 16 × 10 = (160π)/3 m³

V_cone ≈ 160π/3 ≈ 167.55 m³

Step 5: Calculate the percentage relationship

Percentage = (Cone Volume / Cylinder Volume) × 100%

Percentage = [(160π/3) / (160π)] × 100% = (1/3) × 100% ≈ 33.33%

Step 6: Verify the relationship

Indeed, the volume of a cone is 1/3 the volume of a cylinder with the same base and height

This is a fundamental geometric relationship

Cylinder Volume: 160π ≈ 502.65 m³
Double Height Volume: 320π ≈ 1005.31 m³
Cone Volume: (160π)/3 ≈ 167.55 m³
Cone Percentage: 33.33%
Final Answer:

The original cylinder has a volume of 160π m³ (≈502.65 m³). The cylinder with double height has a volume of 320π m³ (≈1005.31 m³). The cone with the same base and height has a volume of (160π)/3 m³ (≈167.55 m³), which is 33.33% of the cylinder's volume.

Applied Rules:

• Cylinder Formula: V = πr²h

• Direct Proportionality: Volume is directly proportional to height

• Cone-Cylinder Relationship: Cone volume is 1/3 of cylinder volume with same base and height

• Dimensional Scaling: Volume changes linearly with height when other dimensions are constant

3 Sphere Volume
Exercise 3
Calculate the volume of a sphere with radius 6 cm. Then find the volume of a sphere with diameter 10 cm. Compare the volumes and explain the relationship between radius and volume. Also calculate how much the volume changes if the radius is tripled. Finally, find the volume of a hemisphere with the same radius as the first sphere.
Given: Sphere 1: r = 6 cm; Sphere 2: d = 10 cm (so r = 5 cm)
Key Definitions:

Sphere Volume: V = (4/3)πr³

Hemisphere Volume: V = (2/3)πr³

Radius: The distance from center to any point on the surface

Diameter: The distance across the sphere through the center (d = 2r)

Cubic Relationship: Volume changes with the cube of the radius

Sphere Volume
V = (4/3)πr³
Radius Scaling
V ∝ r³
Hemisphere
V = (2/3)πr³
Step 1: Calculate the volume of the first sphere

V₁ = (4/3)πr³ = (4/3)π(6³) = (4/3)π(216) = (864π)/3 = 288π cm³

V₁ ≈ 288 × 3.14159 ≈ 904.78 cm³

Step 2: Calculate the volume of the second sphere

For sphere 2: diameter = 10 cm, so radius = 5 cm

V₂ = (4/3)πr³ = (4/3)π(5³) = (4/3)π(125) = (500π)/3 cm³

V₂ ≈ 500π/3 ≈ 523.60 cm³

Step 3: Calculate the volume when radius is tripled

If original radius is r, then new radius is 3r

New V = (4/3)π(3r)³ = (4/3)π(27r³) = 27 × (4/3)πr³

This is 27 times the original volume (since 3³ = 27)

Step 4: Calculate the volume of a hemisphere with r = 6 cm

V_hemisphere = (1/2)V_sphere = (1/2) × (4/3)πr³ = (2/3)πr³

V_hemisphere = (2/3)π(6³) = (2/3)π(216) = (432π)/3 = 144π cm³

V_hemisphere ≈ 144 × 3.14159 ≈ 452.39 cm³

Step 5: Analyze the radius-volume relationship

Since V = (4/3)πr³, volume is proportional to the cube of the radius

When radius doubles, volume increases by factor of 8 (2³ = 8)

When radius triples, volume increases by factor of 27 (3³ = 27)

Step 6: Compare the two spheres

V₁ = 288π cm³ (r = 6 cm)

V₂ = (500π)/3 cm³ (r = 5 cm)

Ratio = 288π ÷ (500π/3) = 288 × 3/500 = 864/500 = 1.728

This means V₁ is 1.728 times larger than V₂

Sphere 1 Volume: 288π ≈ 904.78 cm³
Sphere 2 Volume: (500π)/3 ≈ 523.60 cm³
Radius Tripling: Volume × 27
Hemisphere: 144π ≈ 452.39 cm³
Final Answer:

The first sphere has a volume of 288π cm³ (≈904.78 cm³), the second has (500π)/3 cm³ (≈523.60 cm³). When radius triples, volume increases by a factor of 27. The hemisphere with radius 6 cm has a volume of 144π cm³ (≈452.39 cm³).

Applied Rules:

• Sphere Formula: V = (4/3)πr³

• Cubic Scaling: V ∝ r³ (volume scales with cube of linear dimensions)

• Hemisphere Formula: V = (2/3)πr³ (half of full sphere)

• Proportional Analysis: Understanding how changes affect volume

Volume of 3D Figures: Complete Guide
V = (4/3)πr³
Sphere Volume
Core Concepts and Definitions:

Volume: The amount of space occupied by a three-dimensional figure, measured in cubic units

Prism: A 3D figure with two parallel congruent bases and rectangular lateral faces

Pyramid: A 3D figure with a polygonal base and triangular lateral faces meeting at an apex

Cylinder: A 3D figure with two parallel circular bases and a curved lateral surface

Cone: A 3D figure with a circular base and a curved lateral surface meeting at an apex

Sphere: A perfectly round 3D figure where all points on the surface are equidistant from the center

Rectangular Prism
V = lwh
Length × Width × Height
Cylinder
V = πr²h
Base Area × Height
Sphere
V = (4/3)πr³
Four-thirds π × Radius³
Volume Calculation Strategy:
  1. Identify the 3D shape: Determine if it's a prism, pyramid, cylinder, cone, or sphere
  2. Select the appropriate formula: Use the correct volume formula for the shape
  3. Identify required dimensions: Measure or extract necessary values
  4. Replace variables with known measurements
  5. Calculate: Perform the mathematical operations
  6. Verify units: Ensure the answer is in cubic units
Tip 1: For prisms and cylinders, use V = Base Area × Height regardless of base shape.
Tip 2: For pyramids and cones, use V = (1/3) × Base Area × Height.
Tip 3: Volume scales with the cube of linear dimensions (V ∝ r³).
Tip 4: Volume is always expressed in cubic units (cm³, m³, etc.).
Solution: Exercises 4 to 5
4 Square Pyramid Volume
Exercise 4
Calculate the volume of a square pyramid with base edge length 10 cm and height 12 cm. Then find the volume of a pyramid with the same base but double the height. Explain the relationship between height and volume. Also calculate the volume of a rectangular pyramid with base dimensions 8 cm × 6 cm and height 15 cm. Finally, determine how the volume changes if all linear dimensions are doubled.
Given: Square pyramid: base edge = 10 cm, height = 12 cm; Double height = 24 cm
Key Definitions:

Square Pyramid Volume: V = (1/3)Bh, where B is base area

Base Area: B = s² for square base

Rectangular Pyramid Volume: V = (1/3)Bh, where B = lw

Pyramid Volume Formula: V = (1/3) × Base Area × Height

Dimensional Scaling: How volume changes with size changes

Pyramid Volume
V = (1/3)Bh
Base Area
B = s² or B = lw
Dimension Scaling
V ∝ l³
Step 1: Calculate the base area of the square pyramid

B = s² = 10² = 100 cm²

Step 2: Calculate the volume of the original square pyramid

V₁ = (1/3)Bh = (1/3) × 100 × 12 = (1/3) × 1200 = 400 cm³

Step 3: Calculate the volume of the pyramid with double height

V₂ = (1/3)Bh = (1/3) × 100 × 24 = (1/3) × 2400 = 800 cm³

Step 4: Analyze the height-volume relationship

When height doubles from 12 cm to 24 cm, volume doubles from 400 cm³ to 800 cm³

This shows that volume is directly proportional to height when base area is constant

V ∝ h (when B is constant)

Step 5: Calculate the volume of the rectangular pyramid

Base area = length × width = 8 × 6 = 48 cm²

V_rect = (1/3)Bh = (1/3) × 48 × 15 = (1/3) × 720 = 240 cm³

Step 6: Calculate the volume when all linear dimensions are doubled

If all linear dimensions double: base edge becomes 20 cm, height becomes 24 cm

New base area = (20)² = 400 cm² (4 times original)

New volume = (1/3) × 400 × 24 = (1/3) × 9600 = 3200 cm³

This is 8 times the original volume (400 × 8 = 3200)

Step 7: Verify the cubic scaling relationship

When linear dimensions double, volume increases by factor of 2³ = 8

Original volume: 400 cm³

Scaled volume: 3200 cm³

Ratio: 3200/400 = 8 ✓

Original Pyramid: 400 cm³
Double Height: 800 cm³
Rectangular Pyramid: 240 cm³
All Dimensions Doubled: 3200 cm³
Final Answer:

The original square pyramid has a volume of 400 cm³. When height is doubled, volume becomes 800 cm³. The rectangular pyramid has a volume of 240 cm³. When all linear dimensions are doubled, the volume increases to 3200 cm³ (8 times the original).

Applied Rules:

• Pyramid Formula: V = (1/3)Bh for any pyramid

• Direct Proportionality: Volume is directly proportional to height when base is constant

• Cubic Scaling: When all dimensions double, volume increases by factor of 8

• Base Area Calculation: Square base: B = s², Rectangular base: B = lw

5 Cone Volume
Exercise 5
Calculate the volume of a cone with radius 7 cm and height 10 cm. Then find the volume of a cone with the same height but double the radius. Explain the relationship between radius and volume. Also calculate the volume of a cone where both radius and height are doubled. Finally, determine how many small cones (r = 1 cm, h = 2 cm) would be needed to equal the volume of the original cone.
Given: Original cone: r = 7 cm, h = 10 cm; Double radius: r = 14 cm, h = 10 cm
Key Definitions:

Cone Volume: V = (1/3)πr²h

Radius: Distance from center of base to edge

Height: Perpendicular distance from base to apex

Proportional Relationships: How volume changes with dimensional changes

Similar Cones: Cones with proportional dimensions

Cone Volume
V = (1/3)πr²h
Radius Effect
V ∝ r² (when h constant)
Combined Effect
V ∝ r²h
Step 1: Calculate the volume of the original cone

V₁ = (1/3)πr²h = (1/3)π(7²)(10) = (1/3)π(49)(10) = (490π)/3 cm³

V₁ ≈ 490π/3 ≈ 513.13 cm³

Step 2: Calculate the volume of the cone with double radius

V₂ = (1/3)πr²h = (1/3)π(14²)(10) = (1/3)π(196)(10) = (1960π)/3 cm³

V₂ ≈ 1960π/3 ≈ 2052.52 cm³

Step 3: Analyze the radius-volume relationship

When radius doubles from 7 cm to 14 cm, volume increases by factor of 4 (since 2² = 4)

V₂/V₁ = (1960π/3) ÷ (490π/3) = 1960/490 = 4

This shows that volume is proportional to the square of the radius when height is constant

V ∝ r² (when h is constant)

Step 4: Calculate the volume when both dimensions are doubled

New cone: r = 14 cm, h = 20 cm

V_new = (1/3)π(14²)(20) = (1/3)π(196)(20) = (3920π)/3 cm³

This is 8 times the original volume (490π/3 × 8 = 3920π/3)

Step 5: Calculate the volume of the small cone

V_small = (1/3)π(1²)(2) = (1/3)π(2) = (2π)/3 cm³

V_small ≈ 2π/3 ≈ 2.09 cm³

Step 6: Calculate how many small cones equal the original cone

Number of small cones = Original volume ÷ Small cone volume

Number = (490π/3) ÷ (2π/3) = (490π/3) × (3/2π) = 490/2 = 245

Step 7: Verify the cubic scaling relationship

When linear dimensions double (r from 7 to 14, h from 10 to 20), volume increases by factor of 2³ = 8

Original: (490π)/3 cm³

Scaled: (3920π)/3 cm³

Ratio: (3920π/3) ÷ (490π/3) = 3920/490 = 8 ✓

Original Cone: (490π)/3 ≈ 513.13 cm³
Double Radius: (1960π)/3 ≈ 2052.52 cm³
Both Doubled: (3920π)/3 ≈ 4105.04 cm³
Small Cones Needed: 245
Final Answer:

The original cone has a volume of (490π)/3 cm³ (≈513.13 cm³). When radius doubles, volume becomes (1960π)/3 cm³ (≈2052.52 cm³). When both dimensions double, volume becomes (3920π)/3 cm³ (≈4105.04 cm³). A total of 245 small cones are needed to equal the original cone's volume.

Applied Rules:

• Cone Formula: V = (1/3)πr²h

• Quadratic Proportionality: Volume is proportional to r² when h is constant

• Cubic Scaling: When all dimensions scale by factor k, volume scales by k³

• Division Principle: Number of objects = total volume ÷ individual volume

Volume of 3D Figures: Comprehensive Guide
V = (1/3)Bh
Pyramid/Cone Volume
Complete Concept Overview:

Volume: The measure of space occupied by a three-dimensional figure, expressed in cubic units

Prism Volume: V = Bh (Base Area × Height)

Pyramid Volume: V = (1/3)Bh (One-third Base Area × Height)

Cylinder Volume: V = πr²h

Cone Volume: V = (1/3)πr²h

Sphere Volume: V = (4/3)πr³

Systematic Volume Calculation:
  1. Shape Identification: Determine the type of 3D figure
  2. Dimension Measurement: Identify all required measurements
  3. Formula Selection: Choose the appropriate volume formula
  4. Value Substitution: Carefully substitute measurements into the formula
  5. Calculation Execution: Perform mathematical operations with precision
  6. Unit Verification: Ensure the answer is in cubic units
  7. Reasonableness Check: Verify the answer makes sense in context
Tip 1: For pyramids and cones, always use the perpendicular height, not slant height.
Tip 2: Volume scales with the cube of linear dimensions (V ∝ r³).
Tip 3: Draw diagrams to visualize the 3D shape and identify dimensions.
Tip 4: Always include units in your calculations and final answer.
Tip 5: Verify your answer using alternative methods when possible.
Common Relationships: Cones and pyramids have 1/3 the volume of prisms/cylinders with same base and height.
Scaling Rules: Volume changes by the cube of the linear scale factor.
Essential Volume Formulas:

• Cube: V = s³

• Rectangular Prism: V = lwh

• Triangular Prism: V = (1/2)bh × length

• Cylinder: V = πr²h

• Cone: V = (1/3)πr²h

• Square Pyramid: V = (1/3)s²h

• Triangular Pyramid: V = (1/3) × (1/2)bh × height

• Sphere: V = (4/3)πr³

• Hemisphere: V = (2/3)πr³

• General Pyramid/Cone: V = (1/3)Bh (where B is base area)

Volume Comparison: Different Shapes
Exercise 6: Volume Analysis
Compare volumes of different shapes with the same base area and height:
• Cylinder: r = 5 cm, h = 10 cm
• Cone: r = 5 cm, h = 10 cm
• Square Prism: base area = π(25), h = 10 cm
• Square Pyramid: base area = π(25), h = 10 cm

Analysis: The chart shows how different shapes with the same base area and height have different volumes.

  • Cylinder: V = πr²h = 250π cm³
  • Cone: V = (1/3)πr²h = (250π)/3 cm³
  • Square Prism: V = Bh = 250π cm³
  • Square Pyramid: V = (1/3)Bh = (250π)/3 cm³

Questions & Answers

Question: Why is the volume of a pyramid one-third the volume of a prism with the same base and height?

Answer: The 1/3 factor in pyramid volume comes from calculus and integration, but it can be understood intuitively:

  • Physical demonstration: You can fit exactly 3 pyramids of the same base and height into a prism of the same base and height
  • Integration approach: The volume is found by integrating cross-sectional areas that decrease linearly from the base to the apex
  • Similar reasoning: As you move from the base toward the apex, the cross-sectional area decreases quadratically with distance

The same principle applies to cones: V = (1/3)πr²h. This is because a cone is essentially a circular pyramid.

This relationship is fundamental in geometry and shows how the pointed shape of pyramids and cones reduces their volume compared to prisms and cylinders with the same base and height.

Question: What's the difference between volume and surface area? How do I know which one to calculate?

Answer: The key differences are:

  • Volume: Measures the space inside a 3D shape (cubic units: cm³, m³)
  • Surface Area: Measures the area of all external surfaces (square units: cm², m²)

Calculate Volume when you need to know:

  • How much liquid a container can hold
  • Amount of material needed to fill a space
  • Capacity of a tank or container
  • Space occupied by an object

Calculate Surface Area when you need to know:

  • Amount of paint needed to cover an object
  • Material needed for wrapping or covering
  • Heat transfer surface area
  • Amount of material needed for construction

Look for keywords: "fill," "contain," "capacity," "space," and "volume" suggest volume calculations. "Cover," "paint," "wrap," "surface," and "area" suggest surface area calculations.

Question: Why does the sphere volume formula have (4/3)πr³? Where does the 4/3 come from?

Answer: The (4/3) in the sphere volume formula V = (4/3)πr³ comes from calculus:

  • The volume is found by integrating the surface area of circular cross-sections
  • Using the disk method: V = ∫π(radius of cross-section)² dx from -r to r
  • This integration results in the coefficient 4/3

Intuitively, you can think of it this way: if you took the surface area of a sphere (4πr²) and integrated it radially inward, you'd get (4/3)πr³.

The sphere is unique because it has the maximum volume for a given surface area among all shapes, which is why water droplets and soap bubbles form spherical shapes (they maximize volume while minimizing surface energy).

For practical purposes, just remember that the volume of a sphere is (4/3)πr³, which is slightly more than 4 times the volume of a cone with the same radius and height.

Question: How do I know if I should use the slant height or perpendicular height for volume calculations?

Answer: For volume calculations, always use the perpendicular height (the vertical distance from base to apex), not the slant height:

  • Pyramids: Use perpendicular height from base to apex
  • Cones: Use perpendicular height from base center to apex
  • Slant height: Only used for surface area calculations

The perpendicular height is the shortest distance from the apex to the base plane, which is what determines the "thickness" of the shape for volume purposes.

Example: If a cone has radius 3 cm and slant height 5 cm, the perpendicular height is √(5² - 3²) = √(25 - 9) = √16 = 4 cm. For volume, use V = (1/3)πr²h = (1/3)π(3²)(4) = 12π cm³.

Remember: volume formulas use perpendicular heights because they're based on the "base area × height" principle, where height is the perpendicular distance.

Question: How do I remember all these different volume formulas? They seem to blend together.

Answer: Here are memory techniques to organize volume formulas:

  • Prisms/Cylinders: V = Base Area × Height (think: stacking layers)
  • Pyramids/Cones: V = (1/3) × Base Area × Height (think: 1/3 of prism/cone)
  • Spheres: V = (4/3)πr³ (think: 4/3 times circular volume)

Group by similarity:

  • Base × Height family: Rectangular prism, cylinder, triangular prism
  • (1/3)Base × Height family: Square pyramid, cone, triangular pyramid
  • Special formulas: Sphere and hemisphere

Create visual associations: pyramids and cones come to a point, so they have 1/3 factor. Cylinders and prisms have flat tops, so no reduction factor. Spheres are completely round, so they have the (4/3)πr³ formula.

Practice with the general formulas: V = Bh for prisms/cylinders and V = (1/3)Bh for pyramids/cones, where B is the base area. This reduces the number of formulas to memorize.