Area of Triangles, Rectangles, and Composite Figures: Detailed Exercises and Solutions

Master area calculations: triangles, rectangles, and composite figures through these 5 comprehensive exercises.

Solution: Exercises 1 to 3
1 Triangle Area
Exercise 1
Find the area of a triangle with a base of 12 cm and a height of 8 cm. Then calculate the area of the triangle if the height is increased by 25%. Also determine the percentage increase in the area.
Given: Base = 12 cm, Height = 8 cm
Key Definitions:

Triangle Area: A = ½ × base × height

Base: Any side of the triangle

Height: The perpendicular distance from the base to the opposite vertex

Percentage Increase: ((New Value - Original Value) / Original Value) × 100%

Area Calculation Method:
  1. Identify the base and corresponding height
  2. Apply the triangle area formula
  3. Calculate the modified height if needed
  4. Apply the formula again with new dimensions
  5. Calculate percentage change
Original Area
A = ½bh
Increased Height
h = 8 × 1.25
New Area
A = ½ × 12 × 10
Step 1: Calculate the original area

A = ½ × base × height = ½ × 12 × 8 = ½ × 96 = 48 cm²

Step 2: Calculate the increased height

New height = Original height + 25% of original height

New height = 8 + (0.25 × 8) = 8 + 2 = 10 cm

Step 3: Calculate the new area

New area = ½ × 12 × 10 = ½ × 120 = 60 cm²

Step 4: Calculate the percentage increase

% Increase = ((New Area - Original Area) / Original Area) × 100%

% Increase = ((60 - 48) / 48) × 100% = (12 / 48) × 100% = 25%

Original Area = 48 cm²
New Area = 60 cm²
% Increase = 25%
Final Answer:

The original area is 48 cm². When the height increases by 25%, the new area becomes 60 cm², representing a 25% increase in area.

Applied Rules:

• Triangle Area Formula: A = ½bh always uses perpendicular height

• Linear Proportionality: Area changes linearly with height when base is constant

• Percentage Calculations: Proper formula for finding percent change

• Dimensional Analysis: Area units are squared

2 Rectangle Area
Exercise 2
A rectangular garden has a length that is 4 meters longer than its width. If the perimeter of the garden is 36 meters, find the area of the garden. Also determine the diagonal length and the ratio of length to width.
Given: Perimeter = 36 m, Length = Width + 4 m
Key Definitions:

Rectangle Area: A = length × width

Rectangle Perimeter: P = 2(length + width)

Rectangle Diagonal: d = √(length² + width²)

Ratio: Comparison of two quantities using division

Define Variables
w = width, l = w + 4
Perimeter Equation
2(l + w) = 36
Area Formula
A = l × w
Step 1: Set up the perimeter equation

Let width = w, then length = w + 4

Perimeter = 2(length + width) = 2(w + 4 + w) = 2(2w + 4) = 4w + 8

So: 4w + 8 = 36

Step 2: Solve for width

4w + 8 = 36

4w = 36 - 8 = 28

w = 28/4 = 7 meters

Step 3: Find the length

Length = w + 4 = 7 + 4 = 11 meters

Step 4: Calculate the area

Area = length × width = 11 × 7 = 77 m²

Step 5: Calculate the diagonal

Diagonal = √(length² + width²) = √(11² + 7²) = √(121 + 49) = √170 ≈ 13.04 meters

Step 6: Calculate the ratio of length to width

Ratio = length : width = 11 : 7

Area = 77 m²
Diagonal ≈ 13.04 m
Ratio = 11:7
Final Answer:

The area of the garden is 77 square meters, the diagonal is approximately 13.04 meters, and the ratio of length to width is 11:7.

Applied Rules:

• Algebraic Modeling: Translate verbal descriptions into equations

• Pythagorean Theorem: Applies to rectangle diagonals

• Ratio Formation: Express comparison in simplest form

• Linear Equation Solving: Isolate variables systematically

3 Composite Figure Area
Exercise 3
A composite figure consists of a rectangle (length 10 cm, width 6 cm) with a semicircle (radius 3 cm) attached to one of its longer sides. Find the total area of the composite figure and the perimeter of the outer boundary. Also calculate the ratio of the semicircle area to the rectangle area.
Given: Rectangle: l = 10 cm, w = 6 cm; Semicircle: r = 3 cm
Key Definitions:

Composite Figure: A shape made up of two or more basic geometric shapes

Step 7: Calculate the ratio of semicircle area to rectangle area

Ratio = (Semicircle Area) : (Rectangle Area) = 4.5π : 60 = π : 40/3 ≈ 1 : 4.24

Rectangle Area: A = length × width

Semicircle Area: A = ½πr²

Perimeter of Composite Figure: Sum of outer boundaries only

Ratio: Comparison of two quantities using division

Rectangle Area
A = l × w
Semicircle Area
A = ½πr²
Total Area
A = Arect + Asemi
Step 1: Calculate the rectangle area

Rectangle Area = length × width = 10 × 6 = 60 cm²

Step 2: Calculate the semicircle area

Semicircle Area = ½πr² = ½ × π × 3² = ½ × π × 9 = 4.5π cm²

≈ 4.5 × 3.14159 ≈ 14.14 cm²

Step 3: Calculate the total area

Total Area = Rectangle Area + Semicircle Area = 60 + 4.5π cm²

≈ 60 + 14.14 = 74.14 cm²

Step 4: Calculate the perimeter of the outer boundary

Perimeter = 3 sides of rectangle + semicircle arc length

Rectangle sides: 10 + 6 + 10 = 26 cm (excluding the side where semicircle is attached)

Semicircle arc: ½ × 2πr = πr = π × 3 = 3π cm

Total perimeter = 26 + 3π ≈ 26 + 9.42 = 35.42 cm

Step 5: Calculate the ratio of semicircle area to rectangle area

Ratio = Semicircle Area : Rectangle Area = 4.5π : 60

= π : 40/3 ≈ 14.14 : 60 ≈ 1 : 4.24

Total Area = 60 + 4.5π ≈ 74.14 cm²
Perimeter ≈ 35.42 cm
Ratio ≈ 1 : 4.24
Final Answer:

The total area of the composite figure is 60 + 4.5π cm² (approximately 74.14 cm²), the perimeter is approximately 35.42 cm, and the ratio of semicircle area to rectangle area is approximately 1:4.24.

Applied Rules:

• Composite Area Addition: Areas of non-overlapping parts add together

• Perimeter of Composite Figures: Only count outer boundaries

• Circle Measurements: Circumference = 2πr, Arc length = θr (in radians)

• Shape Integration: Combine formulas for different geometric shapes

Area of Geometric Figures: Complete Guide
A = ½bh
Triangle Area
Core Concepts and Definitions:

Area: The measure of the space inside a two-dimensional shape

Triangle: A polygon with three sides and three angles

Rectangle: A quadrilateral with four right angles and opposite sides equal

Composite Figure: A shape formed by combining two or more basic geometric shapes

Triangle
A = ½bh
Base × Height ÷ 2
Rectangle
A = lw
Length × Width
Composite Figure
A = Σ(Areas)
Sum of component areas
Area Calculation Strategy:
  1. Identify the shape(s): Determine if it's a triangle, rectangle, or composite
  2. Measure dimensions: Find the required measurements (base, height, length, width)
  3. Select the formula: Choose the appropriate area formula
  4. Substitute values: Plug measurements into the formula
  5. Calculate: Perform the mathematical operations
  6. Check units: Ensure the answer is in square units
Tip 1: For triangles, always use the perpendicular height from base to opposite vertex.
Tip 2: In rectangles, length and width are interchangeable; opposite sides are equal.
Tip 3: For composite figures, break them into simpler shapes and add the areas.
Tip 4: Area answers should always be in square units (cm², m², ft², etc.).
Solution: Exercises 4 to 5
4 Right Triangle Area
Exercise 4
A right triangle has legs measuring 9 cm and 12 cm. Find the area of the triangle, the length of the hypotenuse, and the altitude to the hypotenuse. Also calculate the area using the hypotenuse and altitude to verify the answer.
Given: Leg 1 = 9 cm, Leg 2 = 12 cm
Key Definitions:

Right Triangle: A triangle with one 90° angle

Legs: The two sides forming the right angle

Hypotenuse: The side opposite the right angle (longest side)

Pythagorean Theorem: a² + b² = c² (for right triangles)

Altitude to Hypotenuse: The perpendicular distance from the right angle to the hypotenuse

Triangle Area
A = ½bh
Hypotenuse
c = √(a² + b²)
Altitude Verification
A = ½ch
Step 1: Calculate the area using the legs

Area = ½ × leg₁ × leg₂ = ½ × 9 × 12 = ½ × 108 = 54 cm²

Step 2: Calculate the hypotenuse using Pythagorean theorem

c² = a² + b² = 9² + 12² = 81 + 144 = 225

c = √225 = 15 cm

Step 3: Calculate the altitude to the hypotenuse

We know: Area = ½ × base × height

54 = ½ × 15 × altitude

54 = 7.5 × altitude

Altitude = 54/7.5 = 7.2 cm

Step 4: Verify the area using hypotenuse and altitude

Area = ½ × hypotenuse × altitude = ½ × 15 × 7.2 = ½ × 108 = 54 cm² ✓

Area = 54 cm²
Hypotenuse = 15 cm
Altitude to Hypotenuse = 7.2 cm
Final Answer:

The area of the triangle is 54 cm², the hypotenuse is 15 cm, and the altitude to the hypotenuse is 7.2 cm. The verification confirms the area calculation.

Applied Rules:

• Pythagorean Theorem: Essential for right triangle calculations

• Area Consistency: Same area regardless of which base-height pair is used

• Right Triangle Properties: Legs serve as base and height

• Verification Techniques: Use alternative methods to confirm answers

5 Complex Composite Figure
Exercise 5
A composite figure consists of a square (side 8 cm) with a quarter circle (radius 4 cm) cut out from one corner. Find the area of the remaining figure. Then calculate the area of a rectangle that has the same area as the remaining figure and has a length that is twice its width.
Given: Square: side = 8 cm; Quarter circle: radius = 4 cm
Key Definitions:

Square Area: A = s²

Quarter Circle Area: A = ¼πr²

Subtractive Composition: Area of main shape minus area of removed shape

Rectangle Dimensions: When length = 2 × width, area = 2w²

Area Preservation: Finding dimensions of equivalent area shapes

Square Area
A = s²
Quarter Circle Area
A = ¼πr²
Remaining Area
A = Asquare - Aquarter
Step 1: Calculate the area of the square

Square Area = side² = 8² = 64 cm²

Step 2: Calculate the area of the quarter circle

Quarter Circle Area = ¼πr² = ¼ × π × 4² = ¼ × π × 16 = 4π cm²

≈ 4 × 3.14159 ≈ 12.57 cm²

Step 3: Calculate the area of the remaining figure

Remaining Area = Square Area - Quarter Circle Area = 64 - 4π cm²

≈ 64 - 12.57 = 51.43 cm²

Step 4: Find dimensions of equivalent rectangle

Let width = w, then length = 2w

Rectangle Area = length × width = 2w × w = 2w²

Set equal to remaining area: 2w² = 64 - 4π

w² = (64 - 4π)/2 = 32 - 2π

w = √(32 - 2π) ≈ √(32 - 6.28) ≈ √25.72 ≈ 5.07 cm

Step 5: Calculate the rectangle dimensions

Width ≈ 5.07 cm

Length = 2 × width ≈ 2 × 5.07 ≈ 10.14 cm

Remaining Area = 64 - 4π ≈ 51.43 cm²
Rectangle: w ≈ 5.07 cm, l ≈ 10.14 cm
Final Answer:

The area of the remaining figure is 64 - 4π cm² (approximately 51.43 cm²). A rectangle with the same area and length twice its width would have dimensions of approximately 5.07 cm by 10.14 cm.

Applied Rules:

• Subtractive Area: Area of whole minus area of removed part

• Quarter Circle Formula: One-fourth of full circle area

• Algebraic Substitution: Set areas equal to find unknown dimensions

• Dimensional Analysis: Maintain consistent units throughout

Area Calculations: Comprehensive Guide
A = ½bh
General Triangle Area
Complete Concept Overview:

Area: The amount of space enclosed within a two-dimensional shape, measured in square units

Triangle Area: A = ½ × base × height, where height is perpendicular to the base

Rectangle Area: A = length × width, where opposite sides are equal and all angles are 90°

Composite Figure: A shape formed by combining or subtracting basic geometric shapes

Systematic Approach to Area Problems:
  1. Shape Identification: Determine the type of geometric figure(s) involved
  2. Dimension Measurement: Identify all required measurements
  3. Formula Selection: Choose the appropriate area formula
  4. Value Substitution: Carefully substitute measurements into the formula
  5. Calculation Execution: Perform mathematical operations with precision
  6. Unit Verification: Ensure the answer is in square units
  7. Reasonableness Check: Verify the answer makes sense in context
Tip 1: For triangles, the height must be perpendicular to the chosen base, even if it falls outside the triangle.
Tip 2: In composite figures, clearly identify which parts to add and which to subtract.
Tip 3: Draw diagrams to visualize the problem and label all known dimensions.
Tip 4: Always include units in your calculations and final answer.
Tip 5: Verify your answer using alternative methods when possible.
Common Pitfalls: Using slanted height instead of perpendicular height in triangles, forgetting to square units, miscounting dimensions in composite figures.
Key Relationships: Area scales with the square of linear dimensions; doubling dimensions quadruples area.
Essential Area Formulas:

• Triangle: A = ½bh

• Rectangle: A = lw

• Square: A = s²

• Parallelogram: A = bh

• Rhombus: A = ½d₁d₂

• Trapezoid: A = ½h(b₁ + b₂)

• Circle: A = πr²

• Semicircle: A = ½πr²

• Quarter Circle: A = ¼πr²

• Composite Figure: A = sum of component areas (with subtractions as needed)

Area Comparison: Different Figures
Exercise 6: Area Analysis
Compare areas of different figures with the same perimeter:
• Square: P = 20 cm
• Rectangle: P = 20 cm, l = 7 cm, w = 3 cm
• Triangle: P = 20 cm, equilateral
• Circle: P = 20 cm (circumference)

Analysis: The chart shows how different shapes with the same perimeter have different areas.

  • Square: A = 25 cm²
  • Rectangle: A = 21 cm²
  • Equilateral Triangle: A ≈ 19.25 cm²
  • Circle: A ≈ 31.83 cm²

Questions & Answers

Question: Why do we divide by 2 in the triangle area formula? Where does that come from?

Answer: The division by 2 in the triangle area formula comes from the relationship between triangles and parallelograms:

  • Parallelogram area: A = base × height
  • Triangle relationship: Two congruent triangles form a parallelogram
  • Therefore: One triangle has half the area of the parallelogram

If you take any parallelogram and draw a diagonal, you create two triangles of equal area. Since the parallelogram's area is base × height, each triangle must have an area of ½(base × height).

You can also think of it as: a triangle is essentially "half of a rectangle" with the same base and height. If you imagine completing the triangle into a rectangle, the triangle occupies exactly half of that rectangle's area.

This is why the formula is A = ½bh, not A = bh.

Question: What's the difference between area and perimeter? When do I use each one?

Answer: Area and perimeter are two different measurements of geometric figures:

  • Perimeter: The distance around the outside of a shape (linear measurement)
  • Area: The space inside a shape (square measurement)

Use perimeter when you need to:

  • Fence a yard
  • Frame a picture
  • Run around a track
  • Install baseboards

Use area when you need to:

  • Carpet a floor
  • Paint a wall
  • Plant a garden
  • Tile a surface

Perimeter is measured in linear units (cm, m, ft), while area is measured in square units (cm², m², ft²). Think of perimeter as the "outline" and area as the "filling" of a shape.

Question: How do I know whether to add or subtract areas when working with composite figures?

Answer: The decision to add or subtract depends on how the shapes are arranged:

  • Add areas when: Shapes are combined together (adjacent or overlapping)
  • Subtract areas when: One shape is cut out from or removed from another

Adding examples:

  • A rectangle with a triangle on top (add rectangle area + triangle area)
  • A house shape (rectangle + triangle for roof)

Subtracting examples:

  • A square with a circle cut out (subtract circle area from square area)
  • A rectangle with a triangle cut out (subtract triangle area from rectangle area)

Look for words like "cut out," "removed," "carved," or "subtracted" for subtraction. Look for words like "combined," "added," "attached," or "together" for addition.

Always visualize the final shape and ask yourself: "Am I finding the total covered area or the remaining area?"

Question: What if the height of a triangle is not given? How do I find it?

Answer: If the height of a triangle is not given, you have several options depending on available information:

  • If you have two sides and included angle: Use A = ½ab sin(C)
  • If you have all three sides: Use Heron's formula
  • If you have area and base: Rearrange A = ½bh to find h = 2A/b
  • If it's a right triangle: The legs serve as base and height
  • If you have coordinates: Use coordinate geometry to find perpendicular distance
  • If you have trigonometric ratios: Use sine, cosine, or tangent relationships

For example, if you know two sides of a triangle are 8 cm and 10 cm with an included angle of 60°, you can find the area without knowing the height: A = ½ × 8 × 10 × sin(60°) = 40 × (√3/2) = 20√3 cm².

The key is to identify what information you do have and match it to the appropriate formula or geometric relationship.

Question: How do I find the area of an irregular shape that doesn't fit standard formulas?

Answer: For irregular shapes, use decomposition techniques:

  • Divide and conquer: Break the shape into simpler, recognizable shapes (triangles, rectangles, trapezoids)
  • Grid method: Count squares on a grid to estimate area
  • Enclose and subtract: Enclose the shape in a rectangle and subtract unwanted areas
  • Coordinate geometry: Use the shoelace formula if you have vertex coordinates
  • Approximation: Treat as a combination of standard shapes

For example, an L-shaped region can be viewed as a large rectangle with a smaller rectangle removed, or as two rectangles added together. A complex shape might be broken into triangles and rectangles.

Always look for ways to partition the irregular shape into pieces for which you know area formulas. The total area is the sum (or difference) of the component areas.

Draw lines to create familiar shapes, and remember that the same irregular shape might be divided in multiple ways to achieve the same result.