Given: Side lengths: a = 7 cm, b = 10 cm, c = 12 cm
Perimeter: The sum of all side lengths of a polygon
Triangle Types: Scalene (all sides different), Isosceles (two sides equal), Equilateral (all sides equal)
Semi-perimeter: Half the perimeter, s = P/2
Triangle Inequality: The sum of any two sides must exceed the third side
- Add all side lengths together
- Classify the triangle based on side equality
- Calculate the semi-perimeter
- Verify triangle inequality if required
P = a + b + c = 7 + 10 + 12 = 29 cm
Since all three sides are different (7 ≠ 10 ≠ 12), this is a scalene triangle
s = P/2 = 29/2 = 14.5 cm
7 + 10 = 17 > 12 ✓
7 + 12 = 19 > 10 ✓
10 + 12 = 22 > 7 ✓
Semi-perimeter = 14.5 cm
Triangle Type: Scalene
The perimeter of the triangle is 29 cm. It is a scalene triangle with a semi-perimeter of 14.5 cm.
• Perimeter Definition: Sum of all side lengths
• Triangle Classification: Based on equality of sides
• Triangle Inequality: Ensures the three sides can form a valid triangle
• Semi-perimeter Use: Needed for Heron's formula and other calculations
Given: Area = 70 m², Length = Width + 3 m
Rectangle Perimeter: P = 2(length + width)
Rectangle Area: A = length × width
Rectangle Diagonal: d = √(length² + width²)
Quadratic Equation: ax² + bx + c = 0, solved using factoring or quadratic formula
Let width = w, then length = w + 3
Area = length × width = w(w + 3) = 70
w² + 3w = 70
w² + 3w - 70 = 0
(w + 10)(w - 7) = 0
So w = 7 (since width cannot be negative)
Length = w + 3 = 7 + 3 = 10 meters
P = 2(length + width) = 2(10 + 7) = 2(17) = 34 meters
d = √(length² + width²) = √(10² + 7²) = √(100 + 49) = √149 ≈ 12.21 meters
Diagonal ≈ 12.21 m
The perimeter of the garden is 34 meters, and the diagonal measures approximately 12.21 meters.
• Algebraic Modeling: Translate word problems into equations
• Quadratic Solution: Factor or use quadratic formula
• Pythagorean Theorem: Applies to rectangle diagonals
• Positive Solutions: Physical measurements must be positive
Given: Apothem = 5√3 ft, Regular hexagon
Regular Polygon: A polygon with all sides and angles equal
Apothem: The distance from the center to the midpoint of any side
Regular Hexagon Properties: 6 equal sides, internal angles of 120°
Relationship: In a regular hexagon, apothem = (s√3)/2, where s is side length
In a regular hexagon: apothem = (side × √3)/2
5√3 = (s × √3)/2
5√3 × 2 = s × √3
10√3 = s × √3
s = 10√3/√3 = 10 feet
P = 6 × side length = 6 × 10 = 60 feet
Area = (Perimeter × Apothem)/2 = (60 × 5√3)/2 = 150√3 ≈ 259.81 ft²
Perimeter = 60 ft
Area ≈ 259.81 ft²
Each side of the hexagon is 10 feet long, the perimeter is 60 feet, and the area is approximately 259.81 square feet.
• Regular Polygon Properties: Special relationships exist in regular polygons
• Apothem-Side Relationship: Specific ratios in regular polygons
• Area Formula: A = (Perimeter × Apothem)/2 for regular polygons
• Algebraic Manipulation: Isolate variables in geometric formulas
Polygon: A closed plane figure formed by three or more straight line segments
Perimeter: The total distance around the boundary of a polygon
Regular Polygon: A polygon with all sides and angles equal
Irregular Polygon: A polygon with sides and/or angles of different measures
- Identify the polygon type: Regular, irregular, or specific type
- Count the number of sides: Determine how many sides to add
- Measure or find side lengths: Use given information or geometric relationships
- Apply the appropriate formula: Sum all sides or use specific formulas
- Verify units: Ensure all measurements use the same units
- Check reasonableness: Verify the answer makes sense
Given: Four sides: 8, 12, 15, 10 cm; Total perimeter = 60 cm
Irregular Polygon: A polygon with sides and angles of different measures
Perimeter Sum Property: The sum of all side lengths equals the perimeter
Statistical Measures: Average = sum/n, Range = max - min
Missing Value: Use perimeter property to find unknown side length
Sum of known sides = 8 + 12 + 15 + 10 = 45 cm
Total perimeter = Sum of all five sides
60 = 45 + fifth side
Fifth side = 60 - 45 = 15 cm
Average = Total perimeter ÷ Number of sides = 60 ÷ 5 = 12 cm
Side lengths: 8, 10, 12, 15, 15
Range = Maximum - Minimum = 15 - 8 = 7 cm
Average Side Length = 12 cm
Range = 7 cm
The fifth side measures 15 cm, the average side length is 12 cm, and the range of side lengths is 7 cm.
• Perimeter Property: Sum of all sides equals perimeter
• Algebraic Solution: Use subtraction to find missing values
• Statistical Analysis: Calculate averages and ranges for geometric data
• Organizational Skills: List all values to avoid errors
Given: Square: side = 10 cm; Rectangle: length = 10 cm, width = 6 cm
Composite Shape: A shape formed by combining two or more basic geometric shapes
Shared Boundary: When shapes are joined, the shared edge is not part of the exterior perimeter
Exterior Perimeter: Only count the edges that form the outer boundary
Ratio Calculation: Comparison of two quantities using division
Square perimeter = 4 × 10 = 40 cm
Rectangle perimeter = 2(10 + 6) = 2(16) = 32 cm
The square and rectangle share a side of length 10 cm
This shared edge appears in both perimeters but doesn't contribute to the composite perimeter
Composite perimeter = Psquare + Prect - 2 × shared edge
Composite perimeter = 40 + 32 - 2(10) = 72 - 20 = 52 cm
Sum of individual perimeters = 40 + 32 = 72 cm
Composite perimeter = 52 cm
Ratio = 52/72 = 13/18 ≈ 0.722
Ratio ≈ 0.722 (13:18)
The perimeter of the composite shape is 52 cm, which is approximately 72.2% of the sum of the individual perimeters.
• Composite Perimeter: Subtract shared boundaries from the sum of individual perimeters
• Boundary Analysis: Count only exterior edges
• Ratio Understanding: Shows the relationship between combined and individual measurements
• Visualization: Draw diagrams to identify shared boundaries
Polygon: A two-dimensional shape formed by connecting straight line segments to create a closed figure
Perimeter: The total linear distance around the boundary of a polygon
Regular Polygon: A polygon with all sides equal in length and all angles equal in measure
Irregular Polygon: A polygon with sides and/or angles of different measures
- Identify the polygon: Determine the type and number of sides
- Label all sides: Mark known and unknown side lengths
- Apply appropriate formula: Use general sum or specific formulas
- Calculate carefully: Perform arithmetic operations accurately
- Check units: Ensure all measurements are consistent
- Verify reasonableness: Ensure the answer makes sense
• Triangle: P = a + b + c
• Rectangle: P = 2(l + w)
• Square: P = 4s
• Parallelogram: P = 2(a + b)
• Rhombus: P = 4s
• Trapezoid: P = a + b + c + d
• Regular Polygon: P = n × s
• Irregular Polygon: P = sum of all side lengths
• Composite Shape: P = sum of perimeters - shared boundaries
• General Rule: P = Σ(all side lengths)
• Triangle: s = 5 cm
• Square: s = 5 cm
• Pentagon: s = 5 cm
• Hexagon: s = 5 cm
• Octagon: s = 5 cm
Analysis: The chart shows how perimeter increases with the number of sides when side length is constant.
- Triangle: P = 3 × 5 = 15 cm
- Square: P = 4 × 5 = 20 cm
- Pentagon: P = 5 × 5 = 25 cm
- Hexagon: P = 6 × 5 = 30 cm
- Octagon: P = 8 × 5 = 40 cm