Using Formulas for Area: Detailed Exercises and Solutions

Master area formulas: triangles, rectangles, circles, and composite figures through these 5 comprehensive exercises.

Solution: Exercises 1 to 3
1 Triangle Area Formula
Exercise 1
Find the area of a triangle with base 15 cm and height 8 cm. Then calculate the area of a triangle with the same base but double the height. Explain the relationship between the heights and areas. Also, find the area of a right triangle with legs of 9 cm and 12 cm.
Given: Base = 15 cm, Height₁ = 8 cm, Height₂ = 16 cm
Key Definitions:

Triangle Area Formula: A = ½ × base × height

Base: Any side of the triangle

Height: The perpendicular distance from the base to the opposite vertex

Right Triangle: A triangle with one 90° angle

Proportional Relationship: Area changes proportionally with height when base is constant

Formula Application Method:
  1. Identify the correct base and corresponding height
  2. Apply the triangle area formula: A = ½bh
  3. Substitute known values into the formula
  4. Perform calculations carefully
  5. Compare results to understand proportional relationships
Triangle Area
A = ½bh
Height Relationship
h₂ = 2h₁ → A₂ = 2A₁
Right Triangle Area
A = ½ab
Step 1: Calculate the area of the first triangle

A₁ = ½ × base × height₁ = ½ × 15 × 8 = ½ × 120 = 60 cm²

Step 2: Calculate the area of the second triangle (double height)

A₂ = ½ × base × height₂ = ½ × 15 × 16 = ½ × 240 = 120 cm²

Step 3: Analyze the relationship between heights and areas

When height doubles from 8 cm to 16 cm, the area doubles from 60 cm² to 120 cm²

This demonstrates the direct proportional relationship: A ∝ h (when base is constant)

Step 4: Calculate the area of the right triangle

In a right triangle, the legs serve as base and height

A = ½ × leg₁ × leg₂ = ½ × 9 × 12 = ½ × 108 = 54 cm²

Triangle 1: 60 cm²
Triangle 2: 120 cm²
Right Triangle: 54 cm²
Final Answer:

The area of the first triangle is 60 cm², the area of the second triangle (with double the height) is 120 cm², and the area of the right triangle is 54 cm².

Applied Rules:

• Triangle Area Formula: A = ½bh, where h is perpendicular to the base

• Direct Proportionality: When base is constant, area is directly proportional to height

• Right Triangle Property: Legs serve as base and height

• Dimensional Analysis: Area units are squared (cm²)

2 Rectangle and Square Area Formulas
Exercise 2
A rectangular garden has a length that is 3 times its width. If the perimeter of the garden is 64 meters, find the area of the garden. Then calculate the area of a square with the same perimeter as the rectangle. Which shape has the larger area? Also find the diagonal length of both shapes.
Given: Perimeter = 64 m, Length = 3 × Width
Key Definitions:

Rectangle Area: A = length × width

Rectangle Perimeter: P = 2(length + width)

Square Area: A = s² (where s is side length)

Square Perimeter: P = 4s

Diagonal Length: d = √(l² + w²) for rectangle, d = s√2 for square

Isoperimetric Property: Among all shapes with the same perimeter, the circle has maximum area

Define Variables
w = width, l = 3w
Perimeter Equation
2(l + w) = 64
Area Comparison
Arect vs Asq
Step 1: Set up the perimeter equation for the rectangle

Let width = w, then length = 3w

Perimeter = 2(length + width) = 2(3w + w) = 2(4w) = 8w

So: 8w = 64

Step 2: Solve for the width and find dimensions

w = 64/8 = 8 meters

Length = 3w = 3 × 8 = 24 meters

Step 3: Calculate the rectangle's area

Area of rectangle = length × width = 24 × 8 = 192 m²

Step 4: Calculate the square's dimensions and area

For a square with the same perimeter: 4s = 64, so s = 16 meters

Area of square = s² = 16² = 256 m²

Step 5: Compare the areas

Rectangle area: 192 m²

Square area: 256 m²

The square has a larger area (256 > 192)

Step 6: Calculate diagonal lengths

Rectangle diagonal = √(l² + w²) = √(24² + 8²) = √(576 + 64) = √640 ≈ 25.30 m

Square diagonal = s√2 = 16√2 ≈ 22.63 m

Rectangle: 192 m²
Square: 256 m²
Square has larger area
Final Answer:

The rectangle has an area of 192 m², the square has an area of 256 m². The square has the larger area. The rectangle's diagonal is approximately 25.30 m, and the square's diagonal is approximately 22.63 m.

Applied Rules:

• Algebraic Modeling: Translate verbal descriptions into equations

• Isoperimetric Property: Among rectangles with fixed perimeter, the square has maximum area

• Pythagorean Theorem: Used to find diagonal lengths

• Variable Substitution: Express one variable in terms of another

3 Circle Area Formula
Exercise 3
Find the area of a circle with radius 7 cm. Then calculate the area of a circle with diameter 10 cm. Compare the areas and explain the relationship. Finally, find the area of a sector with central angle 60° in the first circle. Also determine how the area changes if the radius is tripled.
Given: Circle 1: r = 7 cm; Circle 2: d = 10 cm; Sector: r = 7 cm, θ = 60°
Key Definitions:

Circle Area: A = πr²

Diameter: d = 2r

Sector Area: A = (θ/360°) × πr² (when θ is in degrees)

Quadratic Proportionality: Area changes with the square of the radius

Sector: A pie-shaped portion of a circle bounded by two radii and an arc

Circle Area
A = πr²
Sector Area
A = (θ/360°)πr²
Radius Scaling
A ∝ r²
Step 1: Calculate the area of the first circle

Circle 1: A₁ = πr² = π × 7² = π × 49 = 49π cm²

≈ 49 × 3.14159 ≈ 153.94 cm²

Step 2: Calculate the area of the second circle

Circle 2: radius = d/2 = 10/2 = 5 cm

A₂ = πr² = π × 5² = π × 25 = 25π cm²

≈ 25 × 3.14159 ≈ 78.54 cm²

Step 3: Calculate the sector area

Sector area = (central angle/360°) × πr²

Sector area = (60°/360°) × π × 7² = (1/6) × 49π = 49π/6 cm²

≈ 8.17π ≈ 25.66 cm²

Step 4: Analyze the effect of tripling the radius

If radius is tripled: new radius = 3r

New area = π(3r)² = π × 9r² = 9πr²

This is 9 times the original area (since 3² = 9)

Step 5: Compare the results

Circle 1 (r=7): 49π cm²

Circle 2 (r=5): 25π cm²

The first circle has a larger area as expected

Circle 1: 49π ≈ 153.94 cm²
Circle 2: 25π ≈ 78.54 cm²
Sector: 49π/6 ≈ 25.66 cm²
Final Answer:

The first circle has an area of 49π cm² (≈153.94 cm²), the second circle has an area of 25π cm² (≈78.54 cm²), and the sector has an area of 49π/6 cm² (≈25.66 cm²). When the radius is tripled, the area increases by a factor of 9.

Applied Rules:

• Circle Area Formula: A = πr² always uses radius, not diameter

• Quadratic Scaling: Area scales with the square of linear dimensions

• Sector Area: Proportional to the central angle

• Unit Conversion: Diameter to radius: r = d/2

Area Formulas: Complete Guide
A = πr²
Circle Area
Core Concepts and Definitions:

Area: The measure of the space inside a two-dimensional shape, expressed in square units

Formula: A mathematical rule that expresses the relationship between quantities

Dimensions: Linear measurements (length, width, height, radius) that define the size of a shape

Square Units: Units used to measure area (cm², m², ft², etc.)

Triangle
A = ½bh
Base × Height ÷ 2
Rectangle
A = lw
Length × Width
Circle
A = πr²
π × Radius²
Formula Application Strategy:
  1. Identify the shape: Determine which geometric figure is involved
  2. Select the formula: Choose the appropriate area formula
  3. Identify dimensions: Find the required measurements
  4. Substitute values: Replace variables with known values
  5. Calculate: Perform the mathematical operations
  6. Check units: Ensure the answer is in square units
  7. Verify: Check if the answer is reasonable
Tip 1: Always use the perpendicular height in triangle area formulas.
Tip 2: For circles, always use radius (not diameter) in the area formula.
Tip 3: Remember that area scales with the square of linear dimensions.
Tip 4: Draw diagrams to visualize the problem and identify dimensions.
Solution: Exercises 4 to 5
4 Trapezoid Area Formula
Exercise 4
Find the area of a trapezoid with parallel sides (bases) of 12 cm and 8 cm, and a height of 5 cm. Then calculate the area of a trapezoid where the height is doubled but the bases remain the same. Explain the relationship between height and area. Also find the area of an isosceles trapezoid with bases 10 cm and 16 cm, and legs of 5 cm each.
Given: Trapezoid 1: b₁ = 12 cm, b₂ = 8 cm, h = 5 cm; Trapezoid 2: b₁ = 12 cm, b₂ = 8 cm, h = 10 cm
Key Definitions:

Trapezoid: A quadrilateral with exactly one pair of parallel sides

Trapezoid Area: A = ½h(b₁ + b₂), where h is height and b₁, b₂ are parallel bases

Parallel Bases: The two sides that never meet

Height: The perpendicular distance between the parallel bases

Isosceles Trapezoid: A trapezoid with equal-length non-parallel sides

Trapezoid Area
A = ½h(b₁ + b₂)
Height Relationship
A ∝ h (constant bases)
Isosceles Trapezoid
Find height first
Step 1: Calculate the area of the first trapezoid

A₁ = ½h(b₁ + b₂) = ½ × 5 × (12 + 8) = ½ × 5 × 20 = ½ × 100 = 50 cm²

Step 2: Calculate the area of the second trapezoid (double height)

A₂ = ½h(b₁ + b₂) = ½ × 10 × (12 + 8) = ½ × 10 × 20 = ½ × 200 = 100 cm²

Step 3: Analyze the height-area relationship

When height doubles from 5 cm to 10 cm, area doubles from 50 cm² to 100 cm²

This demonstrates the direct proportionality: A ∝ h when bases are constant

Step 4: Calculate the area of the isosceles trapezoid

First, find the height using the Pythagorean theorem

The difference in bases: 16 - 10 = 6 cm

This difference is split equally on both sides: 6/2 = 3 cm each

Height = √(leg² - horizontal distance²) = √(5² - 3²) = √(25 - 9) = √16 = 4 cm

Step 5: Calculate the area of the isosceles trapezoid

A = ½h(b₁ + b₂) = ½ × 4 × (10 + 16) = ½ × 4 × 26 = ½ × 104 = 52 cm²

Trapezoid 1: 50 cm²
Trapezoid 2: 100 cm²
Isosceles Trapezoid: 52 cm²
Final Answer:

The first trapezoid has an area of 50 cm², the second (with double height) has an area of 100 cm², and the isosceles trapezoid has an area of 52 cm².

Applied Rules:

• Trapezoid Area Formula: A = ½h(b₁ + b₂) for any trapezoid

• Direct Proportionality: Area is directly proportional to height when bases are constant

• Pythagorean Theorem: Used to find height in isosceles trapezoid

• Geometric Relationships: Understanding how sides relate in special quadrilaterals

5 Composite Figure Area
Exercise 5
A composite figure consists of a rectangle (length 14 cm, width 8 cm) with a semicircle (diameter 8 cm) attached to one of its shorter sides. Find the total area of the composite figure. Then calculate the area of the same rectangle with a quarter circle (radius 4 cm) cut out from one corner. Compare the two areas. Also find the perimeter of the outer boundary of the first composite figure.
Given: Rectangle: l = 14 cm, w = 8 cm; Semicircle: d = 8 cm; Quarter circle: r = 4 cm
Key Definitions:

Composite Figure: A shape formed by combining two or more basic geometric shapes

Semicircle Area: A = ½πr²

Quarter Circle Area: A = ¼πr²

Outer Perimeter: The total distance around the exterior of a composite figure

Area Addition/Subtraction: Add areas when shapes are combined, subtract when shapes are removed

Rectangle Area
A = lw
Semicircle Area
A = ½πr²
Composite Area
A = Arect + Asemi
Step 1: Calculate the rectangle area

Rectangle Area = length × width = 14 × 8 = 112 cm²

Step 2: Calculate the semicircle area

Semicircle: diameter = 8 cm, so radius = 4 cm

Semicircle Area = ½πr² = ½ × π × 4² = ½ × π × 16 = 8π cm²

≈ 8 × 3.14159 ≈ 25.13 cm²

Step 3: Calculate the total area of the first composite figure

Total Area = Rectangle Area + Semicircle Area = 112 + 8π cm²

≈ 112 + 25.13 = 137.13 cm²

Step 4: Calculate the area with quarter circle cut out

Quarter Circle Area = ¼πr² = ¼ × π × 4² = ¼ × π × 16 = 4π cm²

Area with cutout = Rectangle Area - Quarter Circle Area = 112 - 4π cm²

≈ 112 - 12.57 = 99.43 cm²

Step 5: Calculate the perimeter of the first composite figure

Perimeter = 3 sides of rectangle + semicircle arc length

Rectangle sides: 14 + 8 + 14 = 36 cm (excluding the side where semicircle is attached)

Semicircle arc: ½ × 2πr = πr = π × 4 = 4π cm

Total perimeter = 36 + 4π ≈ 36 + 12.57 = 48.57 cm

Step 6: Compare the two composite areas

First composite (with semicircle): 112 + 8π ≈ 137.13 cm²

Second composite (with cutout): 112 - 4π ≈ 99.43 cm²

The first composite has a larger area

First Composite: 112 + 8π ≈ 137.13 cm²
Second Composite: 112 - 4π ≈ 99.43 cm²
Perimeter: 36 + 4π ≈ 48.57 cm
Final Answer:

The first composite figure (rectangle with semicircle) has an area of 112 + 8π cm² (≈137.13 cm²), while the second (rectangle with quarter circle cutout) has an area of 112 - 4π cm² (≈99.43 cm²). The perimeter of the first composite figure is 36 + 4π cm (≈48.57 cm).

Applied Rules:

• Composite Area Addition: Add areas of non-overlapping parts

• Composite Area Subtraction: Subtract areas of removed parts

• Perimeter Calculation: Only count outer boundaries of composite figures

• Circle Relationships: Diameter = 2 × radius, arc length = θr (in radians)

Using Area Formulas: Comprehensive Guide
A = ½h(b₁ + b₂)
Trapezoid Area
Complete Concept Overview:

Area Formula: A mathematical expression that calculates the space inside a geometric shape

Triangle Area: A = ½bh, where b is base and h is perpendicular height

Rectangle Area: A = lw, where l is length and w is width

Circle Area: A = πr², where r is radius

Proportional Relationships: How area changes with changes in dimensions

Systematic Formula Application:
  1. Shape Recognition: Identify the geometric figure and its properties
  2. Formula Selection: Choose the correct area formula based on the shape
  3. Dimension Identification: Locate the required measurements in the problem
  4. Unit Verification: Ensure all measurements use consistent units
  5. Substitution: Replace variables in the formula with known values
  6. Calculation: Perform mathematical operations carefully
  7. Verification: Check if the answer is reasonable and in correct units
Tip 1: Always use perpendicular height in area formulas, not slanted height.
Tip 2: Remember that area scales quadratically with linear dimensions.
Tip 3: Draw diagrams to visualize the problem and identify dimensions.
Tip 4: For composite figures, break them into simpler shapes.
Tip 5: Always express area answers in square units.
Common Proportionalities: If dimensions double, area quadruples; if dimensions triple, area increases by factor of 9.
Key Relationships: Area ∝ (linear dimension)² for similar shapes.
Essential Area Formulas:

• Triangle: A = ½bh

• Rectangle: A = lw

• Square: A = s²

• Parallelogram: A = bh

• Rhombus: A = ½d₁d₂

• Trapezoid: A = ½h(b₁ + b₂)

• Circle: A = πr²

• Semicircle: A = ½πr²

• Quarter Circle: A = ¼πr²

• Regular Polygon: A = ½Pa (where P is perimeter, a is apothem)

Area Scaling Relationships
Exercise 6: Proportional Relationships
Demonstrate how area changes with linear dimensions:
• Square: s = 1, 2, 3, 4, 5
• Circle: r = 1, 2, 3, 4, 5
• Triangle: b = h = 1, 2, 3, 4, 5

Analysis: The chart shows quadratic scaling of area with linear dimensions.

  • Square: A = s² → Area increases as 1, 4, 9, 16, 25
  • Circle: A = πr² → Area increases proportionally to r²
  • Triangle: A = ½bh → With b=h, A = ½s² → quadratic scaling

Questions & Answers

Question: How do I know which area formula to use for a particular shape? Sometimes I get confused about which one applies.

Answer: Identifying the correct area formula involves recognizing the shape and its defining characteristics:

  • Triangle: 3 sides → A = ½bh
  • Rectangle: 4 sides, all angles 90° → A = lw
  • Square: 4 equal sides, all angles 90° → A = s²
  • Parallelogram: 4 sides, opposite sides parallel → A = bh
  • Trapezoid: 4 sides, one pair parallel → A = ½h(b₁ + b₂)
  • Circle: Curved shape with constant radius → A = πr²

Look for specific properties: number of sides, parallel sides, right angles, curved boundaries. If you're unsure, try to break the shape into simpler parts for which you know formulas. Draw the shape and label its parts to help identify which measurements correspond to which variables in the formulas.

Practice with various shapes will help build your recognition skills. When in doubt, start by counting the sides and noting any special properties like parallel lines or right angles.

Question: What if the height of a triangle isn't given? How do I find it? And what if the height falls outside the triangle?

Answer: There are several methods to find the height of a triangle when it's not given:

  • If you have area and base: h = 2A/b
  • If you have two sides and included angle: A = ½ab sin(C), then use A = ½bh to find h
  • If you have all three sides: Use Heron's formula to find area, then h = 2A/b
  • If it's a right triangle: The legs can serve as base and height
  • If you have coordinates: Use coordinate geometry to find perpendicular distance

Regarding obtuse triangles: Yes, the height can fall outside the triangle! This happens when you choose a base adjacent to the obtuse angle. The height is still the perpendicular distance from the base (extended if necessary) to the opposite vertex. The area formula A = ½bh still applies regardless of where the height falls.

Always remember that height must be perpendicular to the chosen base, regardless of where it intersects the base line.

Question: Why do we use π in the circle area formula? Where does it come from?

Answer: Pi (π) is a fundamental mathematical constant that represents the ratio of a circle's circumference to its diameter. This ratio is constant for all circles, approximately 3.14159...

The origin of π in the area formula comes from calculus and the relationship between the circumference and area of a circle. One way to think about it is to imagine cutting a circle into very thin wedges and rearranging them to form a shape approaching a rectangle:

  • The "length" of this rectangle approaches half the circumference: πr
  • The "width" approaches the radius: r
  • So the area approaches: length × width = πr × r = πr²

Pi appears in circle formulas because it represents the fundamental relationship between linear measurements (radius, diameter, circumference) and the area of circular shapes. It's not arbitrarily chosen—it emerges from the geometric properties of circles.

For practical purposes, you can use π ≈ 3.14 or the π button on your calculator for more precision.

Question: Why does area scale with the square of linear dimensions? If I double the sides, why doesn't the area double?

Answer: Area is a two-dimensional measurement, involving two linear dimensions. When you scale a shape, you're changing both dimensions simultaneously:

  • Rectangle example: If length and width both double, new area = (2l)(2w) = 4lw (4 times original)
  • Square example: If side doubles, new area = (2s)² = 4s² (4 times original)
  • Circle example: If radius doubles, new area = π(2r)² = 4πr² (4 times original)

Think of it this way: if you make a shape twice as long and twice as wide, you're essentially creating 4 copies of the original shape within the new, larger shape. This is why area scales quadratically (with the power of 2) while linear measurements scale linearly (with the power of 1).

For volume, which is three-dimensional, scaling occurs with the cube of linear dimensions (power of 3). This principle applies to all similar shapes.

This is why, in our exercises, when we doubled the height of a triangle, the area doubled (linear relationship with one dimension), but when we doubled both length and width of a rectangle, the area quadrupled (quadratic relationship).

Question: How do I find the area of irregular shapes that don't match standard formulas?

Answer: For irregular shapes, use decomposition techniques:

  • Break into standard shapes: Divide the irregular shape into triangles, rectangles, and other shapes with known formulas
  • Additive method: Add the areas of component shapes
  • Subtractive method: Enclose the shape in a rectangle and subtract unwanted areas
  • Grid method: Count squares on graph paper to estimate area
  • Coordinate method: Use the shoelace formula if you have vertex coordinates

For example, an L-shaped region can be viewed as a large rectangle with a smaller rectangle removed, or as two rectangles added together. A complex polygon might be divided into triangles.

Always look for ways to partition the irregular shape into pieces for which you know area formulas. The total area is the sum (or difference) of the component areas.

In our composite figure exercise, we demonstrated this principle by combining a rectangle and semicircle, or by removing a quarter circle from a rectangle.