Density: Mass per unit volume, ρ = m/V
Volume of Cube: V = s³ where s is the side length
- Calculate the volume of the geometric shape
- Use the given mass to calculate density
- Compare with the density of the medium (water)
V = s³ = (5 cm)³ = 125 cm³
ρ = m/V = 125 g / 125 cm³ = 1 g/cm³
Density of material = 1 g/cm³
Density of water = 1 g/cm³
Since material density = water density, the cube will neither sink nor float but remain suspended in water.
The density of the material is 1 g/cm³. Since this equals the density of water, the cube will remain suspended in water rather than sinking or floating.
• Density Formula: ρ = m/V
• Volume of Cube: V = s³
• Float/Sink Rule: If ρ_material < ρ_medium, object floats; if ρ_material > ρ_medium, object sinks
Volume of Sphere: V = (4/3)πr³
Population Density: Number of people per unit area
V = (4/3)πr³ = (4/3)π(3)³ = (4/3)π(27) = 36π ≈ 113.1 cm³
ρ = m/V = 226 g / 113.1 cm³ ≈ 2.0 g/cm³
Surface area of sphere = 4πR²
Earth's radius ≈ 6,371 km
Surface area ≈ 4π(6,371)² ≈ 510 million km²
Population density = 8 billion people / 510 million km² ≈ 15.7 people/km²
The density of the material is approximately 2.0 g/cm³. If Earth were made of this material, the population density would be approximately 15.7 people per km².
• Volume of Sphere: V = (4/3)πr³
• Surface Area of Sphere: SA = 4πr²
• Population Density: PD = population / area
Volume of Cylinder: V = πr²h
Scale Factor: Linear dimensions change by the scale factor
V = πr²h = π(4)²(10) = π(16)(10) = 160π ≈ 502.7 cm³
m = ρV = (0.8 g/cm³)(502.7 cm³) ≈ 402.1 g
Scale factor 1:100 means actual dimensions are 100 times model dimensions
Actual radius = 4 × 100 = 400 cm = 4 m
Actual height = 10 × 100 = 1000 cm = 10 m
Actual volume = π(4)²(10) = 160π m³ ≈ 502.7 m³
Convert to liters: 502.7 m³ × 1000 L/m³ = 502,700 L
The mass of the liquid in the model is approximately 402.1 g. The actual water tower would have a capacity of approximately 502,700 liters.
• Volume of Cylinder: V = πr²h
• Mass-Density Relationship: m = ρV
• Scale Factor: Volume scales by the cube of the linear scale factor
Density: Mass per unit volume (ρ = m/V), typically measured in g/cm³ or kg/m³.
Population Density: Number of individuals per unit area (people/km²).
Scale Factor: Ratio of corresponding linear dimensions in similar figures.
- Identify Shape: Determine the geometric shape involved
- Calculate Volume: Use appropriate volume formula
- Apply Density Formula: Use ρ = m/V relationship
- Scale Appropriately: Apply scale factors when modeling
- Convert Units: Ensure consistent units throughout
Area of Circle: A = πr²
Population Density: Maximum allowed = 2000 people/km²
A = πr² = π(5)² = 25π ≈ 78.5 km²
Current density = 100,000 people / 78.5 km² ≈ 1,274 people/km²
Maximum allowed density = 2,000 people/km²
Current density (1,274) < maximum (2,000), so the city is large enough.
Minimum area = Population / Max density = 100,000 / 2,000 = 50 km²
50 = πr², so r² = 50/π ≈ 15.92, so r ≈ 3.99 km
Yes, the city is large enough. With a radius of 5 km, the population density is approximately 1,274 people/km², which is below the maximum allowed 2,000 people/km². The minimum required radius would be approximately 3.99 km.
• Area of Circle: A = πr²
• Population Density: PD = Population/Area
• Reverse Calculation: Work backwards to find required dimensions
Volume of Rectangular Prism: V = lwh
Scale Model: All linear dimensions reduced by scale factor
V = lwh = 20 m × 15 m × 0.5 m = 150 m³
Concrete density = 2.4 g/cm³ = 2,400 kg/m³ = 2.4 tons/m³
m = ρV = (2.4 tons/m³)(150 m³) = 360 tons
Scale factor 1:50 means divide each dimension by 50
Model length = 20 m/50 = 0.4 m = 40 cm
Model width = 15 m/50 = 0.3 m = 30 cm
Model height = 0.5 m/50 = 0.01 m = 1 cm
Model volume = (0.4 m)(0.3 m)(0.01 m) = 0.0012 m³ = 1,200 cm³
Model mass = (2.4 g/cm³)(1,200 cm³) = 2,880 g = 2.88 kg
The total mass of concrete needed for the actual foundation is 360 tons. In the scale model (1:50), the dimensions would be 40 cm × 30 cm × 1 cm, and the mass would be 2.88 kg.
• Volume of Rectangular Prism: V = lwh
• Unit Conversion: 1 g/cm³ = 1,000 kg/m³
• Scale Factor: Linear dimensions scale by factor k, volumes scale by k³
Density: The amount of matter per unit volume (ρ = m/V).
Volume: The amount of space occupied by a three-dimensional object.
Scale Factor: The ratio of corresponding linear dimensions in similar geometric figures.
Population Density: The number of individuals per unit area.
- Identify the geometric shape: Determine which volume formula to use
- Calculate the volume: Apply the appropriate volume formula
- Apply the density relationship: Use ρ = m/V to find missing values
- Handle scale models: Apply scale factor to linear dimensions
- Convert units as needed: Ensure consistency throughout calculations
• Density Formula: ρ = m/V
• Cube Volume: V = s³
• Sphere Volume: V = (4/3)πr³
• Cylinder Volume: V = πr²h
• Rectangular Prism Volume: V = lwh
• Metals
• Liquids
• Gases
• Common solids
Analysis: Density values vary significantly across different materials and states of matter.
- Solids generally have higher densities than liquids
- Liquids have higher densities than gases
- Metals typically have high densities