Solved Exercises on Geometric Probability in Geometry

Master geometric probability: area-based probability, length-based probability, dartboard problems, and random point selection through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Circular dartboard probability
Exercise 1
A circular dartboard has a radius of 10 cm. The bullseye is a circle with radius 2 cm at the center. What is the probability that a randomly thrown dart lands in the bullseye?
Definition:

Geometric Probability: The probability of an event occurring based on geometric measures such as area, length, or volume.

Formula: P(E) = (Measure of favorable region) / (Measure of total region)

Area-Based Probability Method:
  1. Calculate the area of the favorable region (bullseye)
  2. Calculate the area of the total region (entire dartboard)
  3. Divide the favorable area by the total area
Formula
P = A_favorable/A_total
Method
Area Ratio
Step 1: Calculate bullseye area

Area of bullseye = π × r² = π × (2)² = 4π cm²

Step 2: Calculate total dartboard area

Total area = π × R² = π × (10)² = 100π cm²

Step 3: Calculate probability

P(bullseye) = (Area of bullseye)/(Total area) = (4π)/(100π) = 4/100 = 1/25

Step 4: Express as percentage

Probability = 1/25 = 0.04 = 4%

P(bullseye) = 1/25 = 4%
Final answer:

The probability that a randomly thrown dart lands in the bullseye is 1/25 or 4%.

Applied rules:

• Geometric Probability Formula: P = favorable area / total area

• Circle Area Formula: A = πr²

• Ratio Calculation: Simplify fraction when possible

2 Square region probability
Exercise 2
A point is randomly selected from a square with side length 8 cm. Inside this square is a smaller square with side length 3 cm, positioned in the center. What is the probability that the point falls in the smaller square?
Definition:

Random Selection: Every point in the region has an equal chance of being selected.

Area Probability: Probability = (Area of desired region)/(Total area)

Formula
P = A_smaller/A_larger
Method
Area Ratio
Result
9/64
Step 1: Calculate area of larger square

Area of large square = side² = 8² = 64 cm²

Step 2: Calculate area of smaller square

Area of small square = side² = 3² = 9 cm²

Step 3: Calculate probability

P(smaller square) = (Area of small square)/(Area of large square) = 9/64

Step 4: Express as decimal

Probability = 9/64 ≈ 0.1406 = 14.06%

P(smaller square) = 9/64 ≈ 14.06%
Final answer:

The probability that a randomly selected point falls in the smaller square is 9/64 or approximately 14.06%.

Applied rules:

• Square Area Formula: A = side²

• Geometric Probability: P = favorable area / total area

• Position Independence: Location doesn't affect probability if shape is contained

3 Triangle region probability
Exercise 3
A point is randomly selected from a triangle with vertices at A(0,0), B(6,0), and C(0,4). What is the probability that the point falls below the line y = x?
Definition:

Coordinate Geometry: Using coordinates to solve geometric problems.

Linear Inequality: Points below y = x satisfy y < x.

Formula
P = A_favorable/A_total
Method
Area Comparison
Result
5/12
Step 1: Calculate total triangle area

Area of triangle ABC = ½ × base × height = ½ × 6 × 4 = 12 cm²

Step 2: Find intersection of y = x with triangle

Line y = x intersects hypotenuse of triangle. Hypotenuse: y = -2x/3 + 4. Solving y = x and y = -2x/3 + 4: x = -2x/3 + 4, so 5x/3 = 4, x = 12/5 = 2.4. Intersection point is (2.4, 2.4).

Step 3: Calculate favorable area

The region below y = x within the triangle is a triangle with vertices at (0,0), (2.4, 2.4), and (2.4, 0). Area = ½ × 2.4 × 2.4 = 2.88 cm².

Step 4: Calculate probability

P(y < x) = 2.88/12 = 288/1200 = 6/25 = 0.24 or 24%

P(y < x) = 6/25 = 24%
Final answer:

The probability that a randomly selected point falls below the line y = x is 6/25 or 24%.

Applied rules:

• Triangle Area Formula: A = ½ × base × height

• System of Equations: Solve for intersection points

• Geometric Probability: P = favorable area / total area

Geometric Probability Fundamentals
P(E) = \frac{\text{Measure of favorable region}}{\text{Measure of total region}}
Geometric Probability Formula
Area Probability
P = A_favorable/A_total
Two-dimensional regions
Length Probability
P = L_favorable/L_total
One-dimensional regions
Volume Probability
P = V_favorable/V_total
Three-dimensional regions
Key Definitions:

Geometric Probability: A probability model where outcomes correspond to geometric measures such as area, length, or volume.

Favorable Region: The subset of the sample space where the event occurs.

Total Region: The complete sample space of possible outcomes.

Solution Methods:
  1. Identify Regions: Determine the favorable and total regions
  2. Calculate Measures: Compute areas, lengths, or volumes as appropriate
  3. Apply Formula: Use the geometric probability formula
  4. Simplify: Reduce fractions and convert to percentages if needed
Uniform Distribution: In geometric probability, all points in the region are equally likely to be selected.
Dimension Consistency: Both numerator and denominator must use the same dimensional measure.
Scale Invariance: The probability ratio remains unchanged under scaling transformations.
Tip 1: Always verify that the favorable region is entirely contained within the total region.
Tip 2: Draw diagrams to visualize the regions involved in the problem.
Tip 3: Be careful with units - make sure both measures use the same units.
Solution: Exercises 4 to 5
4 Linear probability
Exercise 4
A point is randomly selected from a line segment of length 12 cm. What is the probability that the point is within 3 cm of either end of the segment?
Definition:

Linear Probability: Probability based on length measures rather than area or volume.

Segment Division: Dividing a line segment into favorable and unfavorable parts.

Formula
P = L_favorable/L_total
Method
Length Ratio
Result
1/2
Step 1: Identify total length

Total length of segment = 12 cm

Step 2: Identify favorable regions

Within 3 cm of left end: [0, 3]
Within 3 cm of right end: [9, 12]
Total favorable length = 3 + 3 = 6 cm

Step 3: Calculate probability

P(within 3 cm of ends) = (Favorable length)/(Total length) = 6/12 = 1/2

Step 4: Express as percentage

Probability = 1/2 = 0.5 = 50%

P(within 3 cm of ends) = 1/2 = 50%
Final answer:

The probability that a randomly selected point is within 3 cm of either end is 1/2 or 50%.

Applied rules:

• Linear Probability Formula: P = favorable length / total length

• Interval Union: Combine disjoint intervals for total favorable measure

• Addition Principle: For disjoint events, probabilities add

5 Annulus probability
Exercise 5
A point is randomly selected from an annular region (ring) with inner radius 3 cm and outer radius 7 cm. What is the probability that the point is closer to the outer edge than to the inner edge?
Definition:

Annulus: The region between two concentric circles.

Distance to Edge: Distance from a point to the nearest boundary of the region.

Formula
P = A_favorable/A_total
Method
Area Ratio
Result
5/8
Step 1: Calculate total area of annulus

Total area = π(outer radius)² - π(inner radius)² = π(7² - 3²) = π(49 - 9) = 40π cm²

Step 2: Determine condition for being closer to outer edge

A point at distance r from center is:
Distance to inner edge = r - 3
Distance to outer edge = 7 - r
Condition: 7 - r < r - 3, so 10 < 2r, so r > 5

Step 3: Calculate favorable area

Favorable region: points with 5 < r ≤ 7
Area = π(7² - 5²) = π(49 - 25) = 24π cm²

Step 4: Calculate probability

P(closer to outer edge) = 24π/40π = 24/40 = 3/5 = 0.6 or 60%

P(closer to outer edge) = 3/5 = 60%
Final answer:

The probability that a randomly selected point is closer to the outer edge than to the inner edge is 3/5 or 60%.

Applied rules:

• Annulus Area Formula: A = π(R² - r²)

• Distance Comparison: Set up inequality based on distance condition

• Geometric Probability: P = favorable area / total area

Complete Guide: Geometric Probability
P(E) = \frac{\text{Measure of favorable region}}{\text{Measure of total region}}
Fundamental Formula
Key definitions:

Geometric Probability: A probability model where outcomes are determined by geometric measures such as area, length, or volume.

Favorable Region: The subset of the sample space where the desired event occurs.

Total Region: The complete sample space of possible outcomes.

Uniform Distribution: Every point in the region has an equal likelihood of being selected.

Complete methodology:
  1. Define the Sample Space: Identify the total region where points can be selected
  2. Define the Event: Specify the condition that defines the favorable region
  3. Calculate Measures: Compute the appropriate geometric measures (area, length, volume)
  4. Apply Formula: Divide favorable measure by total measure
  5. Verify: Ensure probability is between 0 and 1
Tip 1: Draw accurate diagrams to visualize the problem.
Tip 2: Use coordinate geometry for complex regions.
Tip 3: Check that your answer is dimensionless (probability has no units).
Tip 4: Remember that geometric probability assumes uniform distribution.
Common errors: Using different dimensional measures, forgetting to account for all favorable regions, incorrect area/volume calculations.
Exam preparation: Practice with circles, rectangles, triangles, and composite figures.
Formulas to know by heart:

• General Formula: P(E) = (Measure of favorable region)/(Measure of total region)

• Circle Area: A = πr²

• Rectangle Area: A = length × width

• Triangle Area: A = ½ × base × height

• Annulus Area: A = π(R² - r²)

Geometric Probability Examples
Exercise 6: Probability Comparison
Compare probabilities for different geometric scenarios:
• Circle within square
• Square within circle
• Triangle within rectangle

Analysis: The probability depends on the ratio of the areas of the regions.

  • Circle in square: π/4 ≈ 0.785
  • Square in circle: 2/π ≈ 0.637
  • Smaller triangle in larger triangle: area ratio

Questions & Answers

Question: How is geometric probability different from regular probability? It seems like the same concept.

Answer: While geometric probability uses the same fundamental concept of favorable outcomes over total outcomes, there's an important distinction:

  • Regular Probability: Typically deals with discrete, countable outcomes (like rolling dice or drawing cards).
  • Geometric Probability: Deals with continuous, uncountable outcomes based on geometric measures like area, length, or volume.

In regular probability, you might ask "What's the probability of rolling a 6?" (discrete outcome). In geometric probability, you ask "What's the probability that a randomly selected point falls in this region?" (continuous outcome).

The key difference is that geometric probability uses geometric measures (areas, lengths, volumes) instead of counting individual outcomes.

For example, the probability of selecting a specific point in a region is technically zero since points have no area, but we can find the probability of selecting a point in a subregion.

Question: How do I handle problems where the favorable region isn't completely contained in the total region? Can I still use the formula?

Answer: That's a great question! When the favorable region extends beyond the total region, you need to consider only the intersection:

  • Identify the intersection of the favorable region with the total region.
  • Use the area/length/volume of this intersection as your "favorable measure."
  • The formula remains: P = (Intersection area)/(Total area).

For example, if you're finding the probability that a point in a square is also in a circle that partially overlaps the square, use only the area of the circle that lies within the square as your favorable region.

The geometric probability formula always applies to the portion of the favorable region that actually exists within the total region.

This ensures that your probability will always be between 0 and 1, as required.

Question: Do the shapes have to be simple like circles and squares? Can I use geometric probability with irregular shapes?

Answer: Yes, geometric probability can be applied to irregular shapes, but the difficulty depends on your ability to calculate the necessary areas:

  • Simple shapes: Easy to apply formulas for areas (rectangles, circles, triangles).
  • Complex shapes: May require integration, decomposition into simpler shapes, or approximation methods.
  • Real-world applications: Often involve irregular boundaries (like probability of landing in a lake within a park).

The fundamental principle remains the same: P = (Measure of favorable region)/(Measure of total region).

For complex shapes, you might need calculus to find areas, or you could approximate by dividing the shape into smaller, simpler pieces.

In educational problems, you'll typically encounter shapes with calculable areas, but the principle extends to any measurable region.