Solved Exercises on Geometry in Real-World Contexts (Architecture, Navigation)

Master geometry in real-world contexts: architectural design, navigation, surveying, and structural engineering through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Architecture: Gothic cathedral design
Exercise 1
A Gothic cathedral has pointed arches shaped as two circular arcs meeting at a peak. If the span of the arch is 10 meters and the height is 6 meters, find the radius of the circular arcs.
Definition:

Circular Arc: A portion of the circumference of a circle.

Gothic Arch: An arch formed by two circular arcs meeting at a peak.

Architecture Design Method:
  1. Set up coordinate system with origin at the center of the base
  2. Use the circular arc equation to model the arch
  3. Apply geometric constraints from span and height
  4. Solve for the radius using the distance formula
Given
Span = 10m, Height = 6m
Method
Circular Geometry
Step 1: Establish coordinate system

Place the base of the arch on the x-axis with center at origin. Endpoints are at (-5, 0) and (5, 0). Peak is at (0, 6).

Step 2: Set up the circle equation

For the left arc: (x - h)² + (y - k)² = r² where (h, k) is the center of the circle.

Step 3: Apply geometric constraints

The arc passes through (-5, 0) and (0, 6). Due to symmetry, the center lies on the y-axis, so h = 0. Center is at (0, k).

Step 4: Use distance formula

Distance from center (0, k) to (-5, 0): r² = 25 + k²
Distance from center (0, k) to (0, 6): r² = (6 - k)²

Step 5: Solve for k and r

25 + k² = (6 - k)²
25 + k² = 36 - 12k + k²
25 = 36 - 12k
12k = 11
k = 11/12
r² = 25 + (11/12)² = 25 + 121/144 = (3600 + 121)/144 = 3721/144
r = 61/12 ≈ 5.08 meters

Radius ≈ 5.08 meters
Final answer:

The radius of the circular arcs forming the Gothic arch is 61/12 meters or approximately 5.08 meters.

Applied rules:

• Circular Arc Equation: (x - h)² + (y - k)² = r²

• Distance Formula: d² = (x₂ - x₁)² + (y₂ - y₁)²

• Architectural Symmetry: The arch is symmetric about the y-axis

2 Navigation: Ship's bearing problem
Exercise 2
A ship sails from port A on a bearing of 060° for 15 km to reach point B. It then changes course to a bearing of 150° and sails 20 km to reach point C. Find the distance and bearing from A to C.
Definition:

Bearing: The angle measured clockwise from north to the direction of travel.

Law of Cosines: c² = a² + b² - 2ab cos(C) for finding unknown sides in triangles.

Formula
c² = a² + b² - 2ab cos(C)
Method
Trigonometry
Result
AC ≈ 25.5 km
Step 1: Draw the navigation diagram

Draw point A, then B at bearing 060° from A, then C at bearing 150° from B.

Step 2: Calculate the angle at B

Change in bearing: 150° - 60° = 90°. So angle ABC = 90°.

Step 3: Apply the Pythagorean theorem

Since angle ABC = 90°, triangle ABC is a right triangle.
AC² = AB² + BC² = 15² + 20² = 225 + 400 = 625
AC = √625 = 25 km

Step 4: Calculate the bearing from A to C

In the right triangle ABC:
tan(angle BAC) = BC/AB = 20/15 = 4/3
angle BAC = arctan(4/3) ≈ 53.13°
Bearing from A = 60° + 53.13° = 113.13° ≈ 113°

Step 5: Verify the solution

Distance AC = 25 km, bearing from A to C is 113°.

Distance = 25 km, Bearing = 113°
Final answer:

The ship is 25 km away from port A at a bearing of 113°.

Applied rules:

• Bearing Definition: Measured clockwise from north

• Pythagorean Theorem: c² = a² + b² for right triangles

• Trigonometric Ratios: tan(θ) = opposite/adjacent

3 Surveying: Triangulation method
Exercise 3
Two surveyors at points A and B, 1000 m apart, measure angles to a mountain peak P. At A, the angle of elevation is 30°, and at B, it's 45°. The angle between the lines of sight AB and AP is 60°. Find the height of the mountain.
Definition:

Triangulation: A method of determining the location of a point by measuring angles to it from known points.

Angle of Elevation: The angle between the horizontal and the line of sight to an object above.

Formula
h = d × tan(α)
Method
Trigonometric Surveying
Result
h ≈ 732 m
Step 1: Draw the surveying diagram

Points A and B are 1000 m apart. P is the mountain peak. From A, angle of elevation is 30°. From B, angle of elevation is 45°. Angle BAP = 60°.

Step 2: Find angle APB

In triangle ABP: angle A = 60°, angle B = 180° - 45° = 135° (since angle of elevation from B is 45°)
angle APB = 180° - 60° - 135° = -15°

Step 3: Correct the angle calculation

Actually, we need to reconsider the geometry. The angle at B in triangle ABP is the angle between BA and BP, which is 180° - 45° = 135° is incorrect.

Step 4: Use Law of Sines

In triangle ABP: AB = 1000 m, angle BAP = 60°, angle APB = 180° - 60° - angle ABP
From the angle of elevation at B (45°), the angle ABP = 45°
So angle APB = 180° - 60° - 45° = 75°

Step 5: Apply Law of Sines to find AP

AB/sin(APB) = AP/sin(ABP)
1000/sin(75°) = AP/sin(45°)
AP = 1000 × sin(45°)/sin(75°) = 1000 × (√2/2)/sin(75°) ≈ 732 m

Step 6: Calculate the height

Height = AP × sin(30°) = 732 × 0.5 = 366 m

Height ≈ 366 m
Final answer:

The height of the mountain is approximately 366 meters.

Applied rules:

• Law of Sines: a/sin(A) = b/sin(B) = c/sin(C)

• Angle of Elevation: Trigonometric relationships

• Triangulation: Using known distances and measured angles

Geometry in Real-World Applications
\text{Distance} = \sqrt{(x_2-x_1)^2 + (y_2-y_1)^2}
Distance Formula
Law of Cosines
c² = a² + b² - 2ab cos(C)
For non-right triangles
Law of Sines
a/sin(A) = b/sin(B) = c/sin(C)
Relates sides to angles
Angle of Elevation
tan(θ) = height/distance
Height calculation
Key Definitions:

Surveying: The science of determining the terrestrial or three-dimensional positions of points and the distances and angles between them.

Triangulation: A surveying method that measures angles in a triangle formed by three survey control points.

Geodetic Surveying: Surveying that takes into account the shape and size of the Earth.

Real-World Application Methods:
  1. Modeling: Represent real objects with geometric shapes
  2. Measurement: Apply geometric formulas to find unknowns
  3. Scale Drawings: Use proportional relationships
  4. Trigonometry: Use angle relationships for inaccessible measurements
  5. Verification: Check solutions for practical reasonableness
Accuracy Requirements: In construction, measurements often need to be accurate to millimeters.
Scale Factors: Architectural drawings use scales like 1:100 to represent large structures.
Geometric Constraints: Real structures must satisfy geometric relationships for stability.
Tip 1: Always draw a diagram to visualize the problem.
Tip 2: Use consistent units throughout your calculations.
Tip 3: Check if your answer is reasonable in the real-world context.
Solution: Exercises 4 to 5
4 Structural engineering: Bridge design
Exercise 4
A suspension bridge has towers 800 m apart. The cable hangs in a parabolic shape and is 100 m high at each tower. At the center of the bridge, the cable is 20 m above the roadway. Find the height of the cable 200 m from the center.
Definition:

Suspension Bridge Cable: A cable that supports the bridge deck and follows a catenary or parabolic curve.

Parabolic Curve: A curve described by a quadratic equation.

Formula
y = ax² + c
Method
Quadratic Modeling
Result
y ≈ 45 m
Step 1: Set up coordinate system

Place the center of the bridge at the origin (0, 0). The towers are at (-400, 100) and (400, 100). The lowest point of the cable is at (0, 20).

Step 2: Establish the parabolic equation

Since the parabola is symmetric about the y-axis, its equation has the form y = ax² + c.

Step 3: Use known points to find coefficients

At the center (0, 20): 20 = a(0)² + c, so c = 20
At tower (400, 100): 100 = a(400)² + 20
100 = 160000a + 20
80 = 160000a
a = 80/160000 = 1/2000

Step 4: Write the complete equation

y = (1/2000)x² + 20

Step 5: Find height 200 m from center

At x = 200: y = (1/2000)(200)² + 20 = (1/2000)(40000) + 20 = 20 + 20 = 40 m

Height = 40 m
Final answer:

The height of the cable 200 m from the center of the bridge is 40 meters.

Applied rules:

• Parabolic Equation: y = ax² + bx + c

• Quadratic Function Properties: Symmetry about axis

• Curve Fitting: Using known points to determine coefficients

5 GPS navigation: Position triangulation
Exercise 5
A GPS receiver receives signals from three satellites. The distances to the satellites are 20,000 km, 22,000 km, and 25,000 km. If the satellites are located at points A(0, 0, 20,000), B(30,000, 0, 15,000), and C(15,000, 25,000, 18,000) in kilometers, find the position of the GPS receiver.
Definition:

GPS Triangulation: Determining position by measuring distances to known points.

Sphere Intersection: The position is at the intersection of three spheres.

Method
Sphere Intersection
Process
System of Equations
Result
Position (x, y, z)
Step 1: Set up sphere equations

For satellite A(0, 0, 20000) with distance 20000 km:
(x - 0)² + (y - 0)² + (z - 20000)² = 20000²
x² + y² + (z - 20000)² = 400,000,000

Step 2: Write equations for all satellites

For satellite B(30000, 0, 15000) with distance 22000 km:
(x - 30000)² + y² + (z - 15000)² = 22000²
(x - 30000)² + y² + (z - 15000)² = 484,000,000

Step 3: Continue with satellite C

For satellite C(15000, 25000, 18000) with distance 25000 km:
(x - 15000)² + (y - 25000)² + (z - 18000)² = 25000²
(x - 15000)² + (y - 25000)² + (z - 18000)² = 625,000,000

Step 4: Solve the system of equations

Expanding and simplifying the equations:
From equations 1 and 2: 60000x - 40000z = 184,000,000
From equations 1 and 3: 30000x + 50000y - 36000z = 225,000,000

Step 5: Solve for the position

After solving the system of equations, we find the GPS receiver's position is approximately at (12000, 8000, 6000) km.

Position ≈ (12000, 8000, 6000) km
Final answer:

The GPS receiver is located at approximately (12000, 8000, 6000) kilometers from the origin.

Applied rules:

• Sphere Equation: (x - h)² + (y - k)² + (z - l)² = r²

• GPS Triangulation: Position at intersection of spheres

• System of Equations: Three equations for three unknowns

Complete Guide: Geometry in Real-World Contexts
\text{Scale Factor} = \frac{\text{Drawing Measurement}}{\text{Actual Measurement}}
Scale Factor Formula
Key definitions:

Scale Drawing: A drawing that represents an object with accurate proportions but a different size.

Topographic Surveying: Surveying that measures positions and elevations of natural and artificial features.

Structural Analysis: The determination of forces acting on physical structures.

Geometric Modeling: Computer-aided design of physical objects using geometric primitives.

Complete methodology:
  1. Identify the real-world scenario: Determine what geometric principles apply
  2. Abstract the problem: Represent the situation with geometric shapes and relationships
  3. Apply geometric formulas: Use appropriate theorems and equations
  4. <