Solved Exercises on Rotations (turns) in Grade 8

Master rotations: center of rotation, angle of rotation, coordinate rules, clockwise vs counterclockwise, and geometric transformations through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 90° Counterclockwise Rotation
Exercise 1
Rotate triangle ABC with vertices A(2, 1), B(4, 3), C(1, 4) 90° counterclockwise around the origin (0, 0).
Definition:

Rotation: A transformation that turns a figure around a fixed point called the center of rotation by a specific angle.

Rotation method:
  1. Identify the center of rotation (origin in this case)
  2. Determine the angle of rotation (90° counterclockwise)
  3. Apply the coordinate rule for 90° counterclockwise rotation: (x, y) → (-y, x)
  4. Calculate new coordinates for each vertex
Original Points
A(2,1), B(4,3), C(1,4)
Rule
(x,y)→(-y,x)
Rotated Points
A'(-1,2), B'(-3,4), C'(-4,1)
Step 1: Apply 90° CCW Rule

For 90° counterclockwise around origin: (x, y) → (-y, x)

A(2, 1) → A'(-1, 2)

B(4, 3) → B'(-3, 4)

C(1, 4) → C'(-4, 1)

Step 2: Verify Distance Preservation

Distance from origin to each point remains the same after rotation

|OA| = √(2² + 1²) = √5 = |OA'| = √((-1)² + 2²) = √5

Step 3: Verify Angle of Rotation

Each point rotates 90° counterclockwise around the origin

A'(−1, 2), B'(−3, 4), C'(−4, 1)
Final answer:

The rotated triangle has vertices A'(−1, 2), B'(−3, 4), C'(−4, 1)

Applied rules:

• Coordinate Rule: (x, y) → (-y, x) for 90° CCW rotation

• Distance Preservation: Rotations preserve distances

• Angle Preservation: Shape and angles remain unchanged

2 180° Rotation
Exercise 2
Rotate point P(3, -2) 180° around the origin. Then rotate rectangle DEFG with D(1, 1), E(4, 1), F(4, 3), G(1, 3) 180° around the origin.
Definition:

180° Rotation: A half-turn rotation that maps every point (x, y) to (-x, -y).

Original Point
P(3,-2)
Rule
(x,y)→(-x,-y)
Rotated Point
P'(-3,2)
Step 1: Apply 180° Rule to Point P

For 180° rotation around origin: (x, y) → (-x, -y)

P(3, -2) → P'(-3, 2)

Step 2: Apply 180° Rule to Rectangle

D(1, 1) → D'(-1, -1)

E(4, 1) → E'(-4, -1)

F(4, 3) → F'(-4, -3)

G(1, 3) → G'(-1, -3)

Step 3: Verify Properties

180° rotation is equivalent to reflection across the origin

Distances and angles are preserved

P'(−3, 2), D'(−1,−1), E'(−4,−1), F'(−4,−3), G'(−1,−3)
Final answer:

Point P rotates to P'(−3, 2)

Rectangle DEFG rotates to D'(−1,−1), E'(−4,−1), F'(−4,−3), G'(−1,−3)

Applied rules:

• Coordinate Rule: (x, y) → (-x, -y) for 180° rotation

• Central Symmetry: 180° rotation is reflection across the origin

• Distance Preservation: All distances remain unchanged

3 90° Clockwise Rotation
Exercise 3
Rotate triangle XYZ with vertices X(-2, 3), Y(1, 4), Z(0, -1) 90° clockwise around the origin.
Definition:

90° Clockwise Rotation: Maps (x, y) to (y, -x) around the origin.

Original Points
X(-2,3), Y(1,4), Z(0,-1)
Rule
(x,y)→(y,-x)
Rotated Points
X'(3,2), Y'(4,-1), Z'(-1,0)
Step 1: Apply 90° CW Rule

For 90° clockwise around origin: (x, y) → (y, -x)

X(-2, 3) → X'(3, 2)

Y(1, 4) → Y'(4, -1)

Z(0, -1) → Z'(-1, 0)

Step 2: Compare with CCW Rotation

90° CW is equivalent to 270° CCW

90° CW: (x, y) → (y, -x)

90° CCW: (x, y) → (-y, x)

Step 3: Verify Rotation Direction

Clockwise means moving in the direction of clock hands

X'(3, 2), Y'(4, -1), Z'(-1, 0)
Final answer:

The rotated triangle has vertices X'(3, 2), Y'(4, -1), Z'(-1, 0)

Applied rules:

• Coordinate Rule: (x, y) → (y, -x) for 90° CW rotation

• Direction Matters: Clockwise vs counterclockwise gives different results

• Equivalence: 90° CW = 270° CCW

Rules and methods, laws,...
(x,y) → (-y,x)
90° CCW Rotation
Rule 1
(x,y) → (-y,x)
90° Counterclockwise
Rule 2
(x,y) → (y,-x)
90° Clockwise
Rule 3
(x,y) → (-x,-y)
180° Rotation
Key definitions:

Center of Rotation: Fixed point around which the figure rotates

Angle of Rotation: Amount of turn measured in degrees

Direction of Rotation: Clockwise (CW) or counterclockwise (CCW)

Complete methodology:
  1. Identify rotation parameters: Center, angle, direction
  2. Select appropriate rule: Based on angle and direction
  3. Apply rule to each point: Transform coordinates systematically
  4. Verify results: Check distances and orientation
Tip 1: Remember: 90° CCW moves points from quadrant I to II, II to III, etc.
Tip 2: Negative angles indicate clockwise rotation.
Tip 3: 270° CCW is the same as 90° CW.
Tip 4: Always verify that distances from center remain unchanged.
Properties Preserved: Distance, angle measures, parallelism, perpendicularity.
Common Errors: Confusing CW/CCW directions, applying wrong coordinate rules.
Formulas to know by heart:

• 90° CCW: (x, y) → (-y, x)

• 90° CW: (x, y) → (y, -x)

• 180°: (x, y) → (-x, -y)

• 270° CCW: (x, y) → (y, -x)

• 270° CW: (x, y) → (-y, x)

Solution: Exercises 4 to 5
4 Rotation Around Non-Origin Point
Exercise 4
Rotate point R(5, 2) 90° counterclockwise around point C(2, 1).
Definition:

Rotation around non-origin: Translate to origin, rotate, then translate back.

Translate to Origin
(3,1)
Rotate 90° CCW
(-1,3)
Translate Back
(1,4)
Step 1: Translate so C is at origin

Move everything by subtracting C's coordinates: (5,2) - (2,1) = (3,1)

Step 2: Apply 90° CCW rule

(3,1) → (-1,3) using (x,y) → (-y,x)

Step 3: Translate back to original center

Add C's coordinates: (-1,3) + (2,1) = (1,4)

R'(1, 4)
Final answer:

After rotating 90° CCW around C(2,1), point R(5,2) becomes R'(1,4)

Applied rules:

• Translation Method: Move center to origin, rotate, move back

• Order Matters: Translation → Rotation → Reverse Translation

• Distance Preservation: |RC| = |R'C| after rotation

5 Multiple Rotations
Exercise 5
Start with point S(3, 1). First rotate 90° CCW around origin, then rotate the result 90° CCW around origin again.
Definition:

Composition of rotations: Applying multiple rotations sequentially.

Initial Point
S(3,1)
After 1st Rotation
S'(-1,3)
After 2nd Rotation
S''(-3,-1)
Step 1: First 90° CCW rotation

S(3,1) → S'(-1,3) using (x,y) → (-y,x)

Step 2: Second 90° CCW rotation

S'(-1,3) → S''(-3,-1) using (x,y) → (-y,x)

Step 3: Verify total rotation

Two 90° CCW rotations = 180° rotation

Check: (3,1) → (-3,-1) using 180° rule (x,y) → (-x,-y) ✓

Step 4: Understand rotation composition

n × 90° CCW = (n×90)° CCW rotation

S''(-3, -1)
Final answer:

After two 90° CCW rotations, S(3,1) becomes S''(-3,-1)

Applied rules:

• Composition: Two 90° rotations equal one 180° rotation

• Associativity: Order of rotations matters if centers differ

• Periodicity: Four 90° rotations return to original position

Key Concepts: Rotation Properties, Coordinate Rules, and Applications
(x,y) → (-y,x)
Rotation Formula
Key definitions:

Rotation: A rigid transformation that turns a figure around a fixed point by a specified angle.

Center of Rotation: The fixed point around which the figure rotates (usually origin unless specified).

Angle of Rotation: The amount of turn measured in degrees, typically 90°, 180°, or 270°.

Direction: Clockwise (CW) follows clock hands, counterclockwise (CCW) opposes them.

Complete methodology:
  1. Analyze the rotation: Identify center, angle, and direction
  2. Choose the appropriate rule: Based on angle and direction
  3. Transform each point: Apply the coordinate rule systematically
  4. Verify properties: Confirm distances and angles are preserved
Tip 1: For rotations around non-origin points, translate to origin, rotate, then translate back.
Tip 2: Remember: 270° CCW = 90° CW (both move in same direction).
Tip 3: Rotations preserve distance, angle measure, and shape - they are isometries.
Tip 4: Four 90° rotations bring a figure back to its original position.
Preserved Properties: Distance, angle measures, parallelism, perpendicularity, area, perimeter.
Real-world Applications: Wheels, Ferris wheels, clock hands, architectural symmetry.
Standard Rotation Rules (around origin):

• 90° CCW: (x, y) → (-y, x)

• 90° CW: (x, y) → (y, -x)

• 180°: (x, y) → (-x, -y)

• 270° CCW: (x, y) → (y, -x)

• 270° CW: (x, y) → (-y, x)

Exercise with Visualization: Rotation Patterns
Exercise 6: Rotating Shapes
Consider the following rotations of point P(2, 1):
R₁: 90° CCW → P₁(-1, 2)
R₂: 180° → P₂(-2, -1)
R₃: 270° CCW → P₃(1, -2)

Analysis: The chart shows how rotations create circular patterns around the center of rotation.

  • Each 90° rotation moves the point to the next quadrant
  • After four 90° rotations, the point returns to its original position
  • The distance from origin remains constant throughout rotations

Questions & Answers

Question: I'm confused about the difference between 90° clockwise and 90° counterclockwise rotations. They seem to give completely different results!

Answer: You're absolutely right that they give different results! The direction of rotation is crucial:

  • 90° Counterclockwise (CCW): (x, y) → (-y, x)
  • 90° Clockwise (CW): (x, y) → (y, -x)

Think of it this way: if you're standing at point (2, 1) and turn left (CCW), you face a different direction than if you turn right (CW). These rotations are actually inverses of each other!

Example: Starting at (2, 1)
90° CCW → (-1, 2)
90° CW → (1, -2)

Notice that (-1, 2) and (1, -2) are reflections of each other across the origin!

Question: When rotating around a point that's not the origin, like (3, 2), what's the process?

Answer: For rotations around non-origin points, use the three-step translation method:

  1. Translate: Move the center of rotation to the origin by subtracting its coordinates from all points
  2. Rotate: Apply the standard rotation rule around the origin
  3. Translate Back: Add the original center coordinates to all rotated points

Example: Rotating point (5, 4) 90° CCW around center (3, 2):

  • Translate: (5,4) - (3,2) = (2,2)
  • Rotate: (2,2) → (-2,2)
  • Translate back: (-2,2) + (3,2) = (1,4)

This method preserves all the properties of rotation while allowing for any center point!

Question: How do I remember all these rotation rules? They're so easy to mix up!

Answer: Here are memory tricks for the rotation rules:

  • 90° CCW: "Negative Y, X" → (x, y) → (-y, x)
  • 90° CW: "Y, Negative X" → (x, y) → (y, -x)
  • 180°: "Both Negative" → (x, y) → (-x, -y)

Another approach is to think about quadrants:

  • Starting in Quadrant I, 90° CCW moves to Quadrant II
  • So positive x becomes negative y, positive y becomes positive x

Practice with a simple point like (1, 0) to verify: 90° CCW → (0, 1), which confirms (x, y) → (-y, x).

The 180° rule is easiest: just negate both coordinates!

Question: What happens when I perform multiple rotations? Are there shortcuts?

Answer: Yes, there are important shortcuts for multiple rotations!

Same center rotations combine:

  • Two 90° CCW rotations = One 180° rotation
  • Three 90° CCW rotations = One 270° CCW rotation
  • Four 90° CCW rotations = Identity (back to start)

Special equivalences:

  • 90° CW = 270° CCW
  • 270° CW = 90° CCW
  • n × 90° CCW = (n×90)° CCW

For rotations around different centers, you generally must apply each rotation separately, but the final result is still a rigid transformation!

These properties make rotations predictable and systematic.

Question: Why do rotations preserve distances and shapes? What makes them special?

Answer: Rotations are "rigid transformations" or "isometries" because they preserve all geometric properties:

  1. Distance preservation: The distance between any two points stays the same
  2. Angle preservation: All angles in the figure remain unchanged
  3. Shape preservation: Congruence is maintained - figures are identical in size and shape
  4. Parallelism/perpendicularity: Parallel lines stay parallel, perpendicular lines stay perpendicular

This happens because rotation is essentially turning without stretching, shrinking, or distorting. It's like spinning a piece of paper - the paper doesn't change, only its orientation changes!

This property makes rotations fundamental in engineering, architecture, and physics where preserving exact measurements is critical.

Other rigid transformations include translations and reflections.