Translations (Slides) in Geometry

Master translations: coordinate transformations, vector movements, and systematic approaches through these 5 detailed exercises.

Comprehensive Summary & Properties
📐 Translations (Slides)
Geometric Transformations
Key Definitions:

Translation: A transformation that moves every point of a figure the same distance in the same direction

Vector: A quantity with both magnitude and direction, represented as (a, b)

Slide: Informal term for translation transformation

Pre-image: The original figure before transformation

Image: The figure after transformation

Rigid Transformation: A transformation that preserves size and shape

Coordinate Rule: The rule that describes how coordinates change during translation

Translation Vector: The directed distance and direction of the slide

Translation Framework:
  1. Identify Pre-image Coordinates: Determine all vertices of the original figure
  2. Identify Translation Vector: Determine the horizontal and vertical movement (a, b)
  3. Apply Translation Rule: Add vector components to each coordinate: (x, y) → (x+a, y+b)
  4. Calculate Image Coordinates: Find new positions of all vertices
  5. Plot Image Figure: Draw the translated figure
  6. Verify Properties: Confirm that size and shape are preserved
  7. Check Direction: Ensure movement is in the correct direction
Tip 1: In vector (a, b), 'a' is horizontal movement (+right, -left), 'b' is vertical movement (+up, -down).
Tip 2: All points move the same distance in the same direction.
Tip 3: Translation preserves lengths, angles, and parallelism.
Tip 4: Use the same translation vector for all points of the figure.
Tip 5: Check that corresponding sides remain parallel after translation.
Common Pitfalls: Forgetting to apply the same vector to all points, confusing positive and negative directions, not preserving distances and angles, misreading coordinate notation.
Key Takeaways: Translations are rigid transformations that preserve all geometric properties while changing position.
Solution: Exercises 1 to 3
1 Point Translation
Exercise 1
Point A(3, -2) is translated by the vector (5, 4). Find the coordinates of the image point A'.
Definition:

Point Translation: Moving a single point by a specified vector

Solution Strategy:
  1. Identify the original coordinates
  2. Identify the translation vector
  3. Apply the translation rule: (x, y) → (x+a, y+b)
  4. Calculate the new coordinates
Step 1: Identify the original point

Point A has coordinates (3, -2)

Step 2: Identify the translation vector

Translation vector is (5, 4)

This means: move 5 units right and 4 units up

Step 3: Apply the translation rule

(x, y) → (x+5, y+4)

(3, -2) → (3+5, -2+4)

Step 4: Calculate the new coordinates

(3+5, -2+4) = (8, 2)

Step 5: Verify the result

Starting at (3, -2), moving 5 right: 3+5=8

Moving 4 up: -2+4=2

Final position: (8, 2) ✓

Final Answer:

The coordinates of the image point A' are (8, 2).

Applied Rules:

• Translation Rule: (x, y) → (x+a, y+b)

• Vector Components: Horizontal and vertical movements

• Coordinate Addition: Adding vector components to original coordinates

2 Triangle Translation
Exercise 2
Triangle ABC has vertices A(1, 2), B(4, 1), and C(2, 5). Translate the triangle by the vector (-3, 2). Find the coordinates of the new triangle A'B'C'.
Definition:

Figure Translation: Moving all vertices of a figure by the same vector

Step 1: Identify all pre-image coordinates

A(1, 2), B(4, 1), C(2, 5)

Step 2: Identify the translation vector

Translation vector: (-3, 2)

This means: move 3 units left and 2 units up

Step 3: Apply translation rule to each vertex

Rule: (x, y) → (x-3, y+2)

A(1, 2) → A'(1-3, 2+2) = A'(-2, 4)

B(4, 1) → B'(4-3, 1+2) = B'(1, 3)

C(2, 5) → C'(2-3, 5+2) = C'(-1, 7)

Step 4: List the new coordinates

A'(-2, 4), B'(1, 3), C'(-1, 7)

Step 5: Verify properties are preserved

Distance AB = √[(4-1)² + (1-2)²] = √[9+1] = √10

Distance A'B' = √[(1-(-2))² + (3-4)²] = √[9+1] = √10

Distances are preserved ✓

Final Answer:

The coordinates of the translated triangle A'B'C' are: A'(-2, 4), B'(1, 3), and C'(-1, 7).

Applied Rules:

• Uniform Translation: Apply the same vector to all vertices

• Rigid Transformation: Preserves distances and angles

• Coordinate Transformation: (x, y) → (x+a, y+b) for each point

3 Line Segment Translation
Exercise 3
Line segment PQ has endpoints P(-1, 3) and Q(2, -1). If the segment is translated by vector (4, -3), find the coordinates of P'Q'. What is the length of P'Q'?
Definition:

Line Segment Translation: Moving both endpoints of a segment by the same vector

Step 1: Identify the endpoints

P(-1, 3) and Q(2, -1)

Step 2: Identify the translation vector

Translation vector: (4, -3)

This means: move 4 units right and 3 units down

Step 3: Apply translation to each endpoint

Rule: (x, y) → (x+4, y-3)

P(-1, 3) → P'(-1+4, 3-3) = P'(3, 0)

Q(2, -1) → Q'(2+4, -1-3) = Q'(6, -4)

Step 4: Calculate the length of P'Q'

Length = √[(6-3)² + (-4-0)²]

Length = √[3² + (-4)²] = √[9 + 16] = √25 = 5 units

Step 5: Verify length preservation

Original length PQ = √[(2-(-1))² + (-1-3)²] = √[3² + (-4)²] = √25 = 5 units

Length preserved ✓

Final Answer:

The translated segment P'Q' has endpoints P'(3, 0) and Q'(6, -4). The length of P'Q' is 5 units, the same as the original segment PQ.

Applied Rules:

• Distance Preservation: Translations preserve lengths

• Endpoint Translation: Apply vector to both endpoints

• Distance Formula: √[(x₂-x₁)² + (y₂-y₁)²]

Solution: Exercises 4 to 5
4 Rectangle Translation
Exercise 4
Rectangle DEFG has vertices D(0, 0), E(4, 0), F(4, 3), and G(0, 3). Translate it by vector (-2, 5). Find the new coordinates and verify that the shape remains a rectangle.
Definition:

Rectangle Translation: Moving all vertices of a rectangle by the same vector

Step 1: Identify all vertices

D(0, 0), E(4, 0), F(4, 3), G(0, 3)

Step 2: Identify the translation vector

Translation vector: (-2, 5)

Move 2 units left and 5 units up

Step 3: Apply translation to each vertex

Rule: (x, y) → (x-2, y+5)

D(0, 0) → D'(0-2, 0+5) = D'(-2, 5)

E(4, 0) → E'(4-2, 0+5) = E'(2, 5)

F(4, 3) → F'(4-2, 3+5) = F'(2, 8)

G(0, 3) → G'(0-2, 3+5) = G'(-2, 8)

Step 4: Verify rectangle properties

Check if opposite sides are equal and parallel:

Length D'E' = √[(2-(-2))² + (5-5)²] = √[16+0] = 4

Length G'F' = √[(2-(-2))² + (8-8)²] = √[16+0] = 4

Length D'G' = √[(-2-(-2))² + (8-5)²] = √[0+9] = 3

Length E'F' = √[(2-2)² + (8-5)²] = √[0+9] = 3

Step 5: Verify right angles

Check if adjacent sides are perpendicular:

Vector D'G' = (0, 3), Vector D'E' = (4, 0)

Dot product: (0)(4) + (3)(0) = 0, so they're perpendicular ✓

Final Answer:

The translated rectangle D'E'F'G' has vertices D'(-2, 5), E'(2, 5), F'(2, 8), and G'(-2, 8). The shape remains a rectangle with sides of length 4 and 3.

Applied Rules:

• Shape Preservation: Translations preserve geometric properties

• Rectangle Verification: Check equal opposite sides and right angles

• Parallelism: Opposite sides remain parallel after translation

5 Reverse Translation Problem
Exercise 5
Point M' has coordinates (7, -1) after a translation by vector (3, -4). What were the original coordinates of point M before the translation?
Definition:

Reverse Translation: Finding the original position by applying the opposite vector

Step 1: Understand the problem

Translation: M → M' by vector (3, -4)

Known: M'(7, -1)

Unknown: M(x, y)

Step 2: Set up the translation equation

M(x, y) + (3, -4) = M'(7, -1)

(x+3, y-4) = (7, -1)

Step 3: Solve for x and y

x + 3 = 7 → x = 7 - 3 = 4

y - 4 = -1 → y = -1 + 4 = 3

Step 4: Verify the solution

Original point M(4, 3)

Apply translation (3, -4): (4+3, 3-4) = (7, -1) ✓

Step 5: Alternative approach

To reverse a translation by vector (a, b), apply the vector (-a, -b)

M' + (-3, 4) = (7, -1) + (-3, 4) = (4, 3) ✓

Final Answer:

The original coordinates of point M were (4, 3).

Applied Rules:

• Reverse Translation: Apply the opposite vector to find original position

• Vector Addition: (x, y) + (a, b) = (x+a, y+b)

• Inverse Operations: Subtract translation vector to reverse transformation

Questions & Answers

Question: How do I know if a transformation is a translation versus another type of transformation like reflection or rotation?

Answer: Here are the key characteristics to identify translations:

  • Translation: All points move the same distance in the same direction
  • Reflection: Points are flipped over a line (mirror image)
  • Rotation: Points move around a center point in circular motion
  • Dilation: Points move toward or away from a center point (changes size)

In a translation, the orientation of the figure remains the same, while reflections and rotations change orientation.

Question: Do translations preserve all properties of geometric figures? What stays the same and what changes?

Answer: Translations are rigid transformations that preserve most properties:

  • Preserved: Side lengths, angle measures, parallelism, perpendicularity, area, shape
  • Changed: Position, coordinates, orientation (relative to axes)
  • Preserved: Distance relationships, collinearity, midpoints
  • Preserved: Congruence with original figure

Only the location in the coordinate plane changes, not the intrinsic geometric properties.

Question: How can I check if I've performed a translation correctly?

Answer: Use these verification methods:

  • Distance Check: Measure that all points moved the same distance
  • Direction Check: Verify all points moved in the same direction
  • Property Check: Confirm lengths and angles are preserved
  • Vector Check: Apply the same vector to all original coordinates
  • Visual Check: The translated figure should look identical to the original

You can also graph both figures to visually confirm the translation.