Solved Exercises on Radian Measure in Grade 9

Master radian measure: converting between degrees and radians, circular measurements, and geometric relationships through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Degrees to Radians
Exercise 1
Convert 120° to radians. Express your answer in terms of π.
Definition:

Radian: The angle subtended at the center of a circle by an arc equal in length to the radius. 180° = π radians.

Degrees to Radians Method:
  1. Identify the conversion factor: π/180°
  2. Multiply the degree measure by π/180°
  3. Simplify the fraction if possible
Given
120°
Multiply by π/180°
120° × π/180°
Simplify
2π/3 radians
Step 1: Apply the conversion formula

To convert from degrees to radians, multiply by π/180°

Step 2: Set up the multiplication

120° × π/180° = 120π/180

Step 3: Simplify the fraction

120π/180 = 2π/3 radians

120° = 2π/3 radians
Final answer:

120° = 2π/3 radians

Applied rules:

• Conversion Factor: π/180° to convert degrees to radians

• Proportional Reasoning: 180° = π radians

• Fraction Simplification: Reduce 120/180 to 2/3

2 Radians to Degrees
Exercise 2
Convert 5π/6 radians to degrees.
Definition:

Conversion Factor: To convert radians to degrees, multiply by 180°/π.

Given
5π/6 radians
Multiply by 180°/π
5π/6 × 180°/π
Simplify
150°
Step 1: Apply the conversion formula

To convert from radians to degrees, multiply by 180°/π

Step 2: Set up the multiplication

5π/6 × 180°/π = (5π × 180°)/(6 × π)

Step 3: Cancel π and simplify

(5π × 180°)/(6π) = (5 × 180°)/6 = 900°/6 = 150°

5π/6 radians = 150°
Final answer:

5π/6 radians = 150°

Applied rules:

• Conversion Factor: 180°/π to convert radians to degrees

• Cancel Like Terms: Cancel π from numerator and denominator

• Fraction Arithmetic: Multiply numerators and denominators

3 Finding Arc Length
Exercise 3
A circle has a radius of 6 cm. Find the length of an arc that subtends a central angle of 2π/3 radians.
Definition:

Arc Length Formula: When using radians, arc length s = rθ, where r is the radius and θ is the central angle in radians.

Given
r = 6 cm, θ = 2π/3
Formula
s = rθ
Calculate
s = 6 × 2π/3 = 4π cm
Step 1: Identify given values

Radius r = 6 cm, Central angle θ = 2π/3 radians

Step 2: Apply arc length formula

Arc length s = rθ = 6 × 2π/3

Step 3: Calculate the result

s = (6 × 2π)/3 = 12π/3 = 4π cm

Step 4: Provide decimal approximation

s = 4π ≈ 12.57 cm

Arc length = 4π cm ≈ 12.57 cm
Final answer:

The arc length is 4π cm or approximately 12.57 cm

Applied rules:

• Arc Length Formula: s = rθ (when θ is in radians)

• Radian Measure: Direct relationship between angle and arc length

• Proportional Reasoning: Arc length is proportional to central angle

Radian Measure Fundamentals
π radians = 180°
Basic Radian Conversion
Degrees to Radians
θ (rad) = θ° × π/180°
Multiply by π/180°
Radians to Degrees
θ° = θ (rad) × 180°/π
Multiply by 180°/π
Arc Length
s = rθ
Requires θ in radians
Key definitions:

Radian: The angle subtended at the center of a circle by an arc equal in length to the radius

Degree: A unit of angle measure where 360° equals one complete revolution

Central Angle: An angle whose vertex is at the center of the circle

Arc Length: The distance along the curved line making up an arc

Conversion Factor: π radians = 180°

Radian conversion approach:
  1. Identify the direction: Degrees to radians or radians to degrees
  2. Select conversion factor: π/180° or 180°/π
  3. Set up multiplication: Multiply the angle by the factor
  4. Simplify: Reduce fractions if possible
  5. Verify: Check that the conversion makes sense
Tip 1: Remember: π radians = 180°, so 1 radian ≈ 57.3°.
Tip 2: Always multiply by the conversion factor that cancels out the original unit.
Tip 3: Common angles in radians: 30° = π/6, 45° = π/4, 60° = π/3, 90° = π/2.
Common Radian Measures: 0° = 0, 30° = π/6, 45° = π/4, 60° = π/3, 90° = π/2, 180° = π, 270° = 3π/2, 360° = 2π.
Key Notes: Radians are dimensionless and are the natural unit for mathematical calculations involving angles.
Essential formulas:

• Conversion: π radians = 180°

• Degrees to Radians: θ (rad) = θ° × π/180°

• Radians to Degrees: θ° = θ (rad) × 180°/π

• Arc Length: s = rθ (when θ is in radians)

• Sector Area: A = ½r²θ (when θ is in radians)

Solution: Exercises 4 to 5
4 Sector Area
Exercise 4
Find the area of a sector of a circle with radius 8 cm and central angle π/4 radians.
Definition:

Sector Area Formula: When using radians, sector area A = ½r²θ, where r is the radius and θ is the central angle in radians.

Given
r = 8 cm, θ = π/4
Formula
A = ½r²θ
Calculate
A = ½ × 8² × π/4 = 8π cm²
Step 1: Identify given values

Radius r = 8 cm, Central angle θ = π/4 radians

Step 2: Apply sector area formula

Area A = ½r²θ = ½ × 8² × π/4

Step 3: Calculate the result

A = ½ × 64 × π/4 = 32 × π/4 = 8π cm²

Step 4: Provide decimal approximation

A = 8π ≈ 25.13 cm²

Sector area = 8π cm² ≈ 25.13 cm²
Final answer:

The sector area is 8π cm² or approximately 25.13 cm²

Applied rules:

• Sector Area Formula: A = ½r²θ (when θ is in radians)

• Radian Measure: Enables direct calculation without conversion

• Proportional Reasoning: Sector area is proportional to central angle

5 Finding Central Angle
Exercise 5
An arc of length 10π cm is part of a circle with radius 15 cm. Find the central angle in radians and degrees.
Definition:

Finding Central Angle: Using arc length and radius to determine the central angle that intercepts the arc.

Given
s = 10π cm, r = 15 cm
Formula
θ = s/r
Calculate radians
θ = 10π/15 = 2π/3
Convert to degrees
θ = 120°
Step 1: Identify given values

Arc length s = 10π cm, radius r = 15 cm

Step 2: Rearrange arc length formula

Since s = rθ, then θ = s/r

Step 3: Calculate in radians

θ = 10π/15 = 2π/3 radians

Step 4: Convert to degrees

2π/3 × (180°/π) = (2π × 180°)/(3π) = 360°/3 = 120°

Central angle = 2π/3 radians = 120°
Final answer:

The central angle is 2π/3 radians or 120°

Applied rules:

• Angle from Arc Length: θ = s/r

• Unit Conversion: radians to degrees using 180°/π

• Algebraic Manipulation: Rearranging formulas to solve for unknowns

Advanced Radian Measure Applications
π radians = 180°
Basic Radian Conversion
Key definitions:

Radian: The angle subtended at the center of a circle by an arc equal in length to the radius

Degree: A unit of angle measure where 360° equals one complete revolution

Central Angle: An angle whose vertex is at the center of the circle

Arc Length: The distance along the curved line making up an arc

Conversion Factor: π radians = 180°

Proportional Relationships: Arc length and sector area are proportional to central angles

Advanced problem-solving approach:
  1. Identify given values: radius, angle, arc length, or area
  2. Convert units: Ensure angles are in radians when required
  3. Select formula: Arc length, sector area, or angle
  4. Substitute values: Into the appropriate formula
  5. Solve: For the unknown quantity
  6. Verify: Check reasonableness of answer
  7. Extend: Apply to complex geometric figures
Tip 1: Always use radians in formulas s = rθ and A = ½r²θ.
Tip 2: Remember that 180° = π radians.
Tip 3: Common angles in radians: 30° = π/6, 45° = π/4, 60° = π/3, 90° = π/2.
Tip 4: Radians are dimensionless and are preferred in higher mathematics.
Common Radian Measures: 0° = 0, 30° = π/6, 45° = π/4, 60° = π/3, 90° = π/2, 180° = π, 270° = 3π/2, 360° = 2π.
Common Errors: Forgetting to convert degrees to radians, misapplying formulas, incorrect unit conversions.
Real Applications: Engineering, physics, astronomy, and mechanical design.
Essential formulas:

• Conversion: π radians = 180°

• Degrees to Radians: θ (rad) = θ° × π/180°

• Radians to Degrees: θ° = θ (rad) × 180°/π

• Arc Length: s = rθ (when θ is in radians)

• Sector Area: A = ½r²θ (when θ is in radians)

• Segment Area: A = Sector Area - Triangle Area

Visual Application: Wheel Rotation Problem
Exercise 6: Rotating Wheel
A wheel with radius 20 cm rotates through an angle of 3π/2 radians. How far does a point on the rim of the wheel travel? If the wheel rotates through 3π/2 radians, what is the area of the sector swept by the radius?

Wheel Rotation Application: Distance traveled by point on rim equals arc length.

  • Distance traveled: s = rθ = 20 × 3π/2 = 30π cm ≈ 94.25 cm
  • Sector area: A = ½r²θ = ½ × 20² × 3π/2 = 300π cm² ≈ 942.48 cm²
  • 3π/2 radians = 270° (three-quarters of a full rotation)

Questions & Answers

Question: Why do we need radians when we already have degrees?

Answer: Radians are preferred in advanced mathematics because:

  • Natural Measure: Radians are based on the radius of the circle
  • Calculus: Trigonometric functions have simpler derivatives in radians
  • Physics: Angular velocity and acceleration use radians naturally
  • Direct Proportionality: Arc length s = rθ when θ is in radians

Degrees are more convenient for everyday use, but radians are essential for mathematical analysis.

Question: How do I remember the conversion factors?

Answer: Use this memory trick:

  • From degrees to radians: Multiply by π/180° (degrees cancel)
  • From radians to degrees: Multiply by 180°/π (radians cancel)
  • Remember: π radians = 180°

The conversion factor always has the unit you want in the numerator and the unit you're converting from in the denominator.

Question: What does it mean for an angle to be 1 radian?

Answer: One radian is defined as:

  • Central Angle: An angle at the center of a circle
  • Arc Length: The arc length equals the radius
  • Measurement: Approximately 57.3°

If you take the radius of a circle and lay it along the circumference, the angle subtended at the center is 1 radian.