Solved Exercises on Congruent and Similar Figures in Grade 8

Master congruent and similar figures: definitions, properties, applications, and problem-solving techniques through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Identifying congruent figures
Exercise 1
Two triangles have sides of lengths 3 cm, 4 cm, and 5 cm. Are the triangles congruent? Explain your reasoning.
Definition:

Congruent figures: Two figures are congruent if they have the same shape and size. This means all corresponding sides are equal and all corresponding angles are equal.

SSS Congruence: Side-Side-Side - If three sides of one triangle equal three sides of another triangle, the triangles are congruent.

Congruence Criteria:

For triangles: SSS, SAS, ASA, AAS, HL (for right triangles)

Solution method:
  1. Compare corresponding sides: Check if all sides match
  2. Apply congruence criterion: Use SSS, SAS, etc.
  3. Verify angles: Confirm corresponding angles are equal
  4. State conclusion: Declare if figures are congruent
Triangle 1
3, 4, 5 cm
Triangle 2
3, 4, 5 cm
Result
Congruent
Step 1: Compare corresponding sides

Triangle 1: 3 cm, 4 cm, 5 cm

Triangle 2: 3 cm, 4 cm, 5 cm

All corresponding sides are equal.

Step 2: Apply SSS Congruence Criterion

Since all three sides of Triangle 1 equal all three sides of Triangle 2, the triangles are congruent by SSS (Side-Side-Side).

Step 3: Verify angles

Since all sides are equal, by the properties of triangles, all corresponding angles must also be equal.

Step 4: Conclusion

The triangles are congruent.

Triangles are congruent by SSS
Final answer:

Yes, the triangles are congruent. Since all three sides of one triangle equal all three sides of the other triangle, they are congruent by the SSS (Side-Side-Side) congruence criterion.

Applied rules:

• SSS Congruence: Three equal sides guarantee congruence

• Definition of congruence: Same shape and size

• Triangle properties: Equal sides imply equal angles

2 Identifying similar figures
Exercise 2
Triangle ABC has sides 6 cm, 8 cm, and 10 cm. Triangle DEF has sides 3 cm, 4 cm, and 5 cm. Are the triangles similar? If so, what is the scale factor?
Definition:

Similar figures: Two figures are similar if they have the same shape but not necessarily the same size. Corresponding angles are equal and corresponding sides are proportional.

Scale factor: The ratio of corresponding sides in similar figures.

Triangle ABC
6, 8, 10 cm
Triangle DEF
3, 4, 5 cm
Scale factor
2:1
Step 1: Compare ratios of corresponding sides

Ratio 1: 6/3 = 2

Ratio 2: 8/4 = 2

Ratio 3: 10/5 = 2

Step 2: Check if ratios are equal

All ratios equal 2, so corresponding sides are proportional.

Step 3: Verify angles

Since the sides are proportional, corresponding angles must be equal.

Step 4: Determine scale factor

Scale factor = 2:1 (Triangle ABC is 2 times larger than Triangle DEF)

Triangles are similar with scale factor 2:1
Final answer:

Yes, the triangles are similar. The scale factor is 2:1, meaning Triangle ABC is twice the size of Triangle DEF.

Applied rules:

• Definition of similarity: Proportional sides and equal angles

• Scale factor: Ratio of corresponding sides

• SSS Similarity: Proportional sides imply similarity

3 Comparing congruent and similar
Exercise 3
Explain the difference between congruent and similar figures. Provide examples of figures that are: a) both congruent and similar, b) similar but not congruent, c) neither congruent nor similar.
Definition:

Congruent figures: Same shape and same size (exact copies).

Similar figures: Same shape but different sizes (proportional).

Congruent
Same size & shape
Similar
Same shape, diff size
Examples
See below
Step 1: Define congruence

Congruent figures have identical shape and size. All corresponding sides and angles are equal.

Step 2: Define similarity

Similar figures have the same shape but different sizes. Corresponding angles are equal, and corresponding sides are proportional.

Step 3: Example a) Both congruent and similar

Two identical squares: same size (congruent) and same shape (similar with scale factor 1:1).

Step 4: Example b) Similar but not congruent

A 3x3 square and a 6x6 square: same shape but different sizes (scale factor 2:1).

Step 5: Example c) Neither congruent nor similar

A triangle and a circle: different shapes and different sizes.

Congruent: same size & shape, Similar: same shape, diff size
Final answer:

Congruent figures have the same shape and size; similar figures have the same shape but different sizes. Examples: a) Two identical rectangles (both), b) Small and large equilateral triangles (similar only), c) A triangle and a pentagon (neither).

Applied rules:

• Definition of congruence: Same shape and size

• Definition of similarity: Same shape, proportional sizes

• Relationship: All congruent figures are similar, but not all similar figures are congruent

Congruent and Similar Figures: Rules, Properties & Methods
Scale Factor = Larger/Smaller
Similarity Scale Factor
k = A₁/A₂
Area Ratio
Congruent
≡
Same size & shape
Similar
~
Same shape, diff size
Scale Factor
k
Side ratio
Key definitions:

Congruent figures: Figures with identical shape and size. All corresponding sides and angles are equal.

Similar figures: Figures with the same shape but different sizes. Corresponding angles are equal and corresponding sides are proportional.

Scale factor: The ratio of corresponding sides in similar figures.

Proportion: An equation stating that two ratios are equal.

Corresponding parts: Parts of figures that match when the figures are aligned properly.

Problem-solving methodology:
  1. Identify the figures: Determine what shapes are being compared
  2. Compare corresponding parts: Match sides and angles appropriately
  3. Check for equality: Determine if sides are equal (congruence)
  4. Check for proportionality: Determine if sides are proportional (similarity)
  5. Calculate scale factor: If similar, find the ratio of corresponding sides
  6. State conclusion: Declare if figures are congruent, similar, or neither
Tip 1: Remember: All congruent figures are similar (with scale factor 1), but not all similar figures are congruent.
Tip 2: For triangles, check if all sides are proportional to determine similarity.
Tip 3: When comparing figures, ensure you're matching corresponding parts correctly.
Tip 4: The scale factor applies to lengths; for areas, use the square of the scale factor.
Common errors: Confusing congruent with similar, mismatching corresponding parts, forgetting that similarity requires both equal angles AND proportional sides.
Exam preparation: Practice identifying corresponding parts, memorize triangle congruence and similarity criteria, understand how scale factor affects different measurements.
Key properties and formulas:

• Triangle congruence: SSS, SAS, ASA, AAS, HL

• Triangle similarity: AA, SAS, SSS

• Scale factor: k = corresponding side of image/corresponding side of preimage

• Area relationship: Area ratio = (scale factor)²

• Volume relationship: Volume ratio = (scale factor)³

Solution: Exercises 4 to 5
4 Scale factor applications
Exercise 4
Rectangle A has dimensions 4 cm × 6 cm. Rectangle B is similar to Rectangle A with a scale factor of 3. Find the dimensions, perimeter, and area of Rectangle B.
Definition:

Scale factor: The ratio used to enlarge or reduce a figure. When applied to lengths, it changes the size proportionally.

Original
4×6 cm
Scale factor
3
New rectangle
12×18 cm
Step 1: Apply scale factor to dimensions

New length = 6 × 3 = 18 cm

New width = 4 × 3 = 12 cm

Step 2: Calculate new perimeter

Perimeter of B = 2(18 + 12) = 2(30) = 60 cm

Step 3: Calculate new area

Area of B = 18 × 12 = 216 cm²

Step 4: Verify with scale factor relationships

Original perimeter = 2(6 + 4) = 20 cm

Ratio of perimeters = 60/20 = 3 ✓

Original area = 6 × 4 = 24 cm²

Ratio of areas = 216/24 = 9 = 3² ✓

Dimensions: 12×18 cm, Perimeter: 60 cm, Area: 216 cm²
Final answer:

Rectangle B has dimensions 12 cm × 18 cm, perimeter 60 cm, and area 216 cm².

Applied rules:

• Scale factor application: Multiply linear dimensions by scale factor

• Perimeter relationship: Scales by the same factor

• Area relationship: Scales by the square of the factor

5 Real-world application
Exercise 5
A map uses a scale of 1:50,000. If two cities are 8 cm apart on the map, how far are they actually? If a park is 15 km long in reality, how long would it be on the map?
Definition:

Map scale: A ratio that compares distances on the map to actual distances. A scale of 1:50,000 means 1 unit on the map represents 50,000 units in reality.

Scale
1:50,000
Map distance
8 cm
Real distance
4 km
Step 1: Convert map distance to real distance

Real distance = Map distance × Scale factor

Real distance = 8 cm × 50,000 = 400,000 cm = 4 km

Step 2: Convert real distance to map distance

Map distance = Real distance ÷ Scale factor

First convert 15 km to cm: 15 km = 1,500,000 cm

Map distance = 1,500,000 ÷ 50,000 = 30 cm

Step 3: Verify the relationships

8 cm on map → 4 km in reality

30 cm on map → 15 km in reality

Ratio check: 8/4 = 30/15 = 2 (constant scale) ✓

Step 4: Interpret the results

The scale of 1:50,000 maintains the proportional relationship between map and reality.

8 cm on map = 4 km in reality, 15 km = 30 cm on map
Final answer:

The cities are actually 4 km apart. The park would be represented as 30 cm on the map.

Applied rules:

• Scale factor application: Multiply or divide by the scale ratio

• Unit conversion: Convert between different units as needed

• Proportional relationships: Maintain constant ratios

Comprehensive Summary: Congruent and Similar Figures
k = A₁/A₂
Scale Factor
A₁/A₂ = k²
Area Ratio
Key definitions:

Congruent figures: Figures that are identical in both shape and size. They can be superimposed on each other perfectly.

Similar figures: Figures that have the same shape but different sizes. Corresponding angles are equal and corresponding sides are proportional.

Scale factor: The ratio of corresponding lengths in similar figures.

Corresponding parts: Sides or angles that occupy the same relative position in similar or congruent figures.

Proportional: Having the same ratio between corresponding parts.

Complete methodology:
  1. Identify the figures: Determine the type of shapes being compared
  2. Match corresponding parts: Align the figures properly to identify corresponding sides and angles
  3. Check for congruence: Verify if all corresponding sides and angles are equal
  4. Check for similarity: Verify if corresponding angles are equal and sides are proportional
  5. Calculate scale factor: If similar, determine the ratio of corresponding sides
  6. Apply properties: Use scale factor to find missing measurements
Tip 1: Remember: All congruent figures are similar (scale factor = 1), but not all similar figures are congruent.
Tip 2: For triangles, use specific criteria: SSS, SAS, ASA for congruence; AA, SAS, SSS for similarity.
Tip 3: Scale factor affects lengths linearly, areas by the square, and volumes by the cube.
Tip 4: Always check that corresponding parts are properly matched when comparing figures.

Key properties: Congruent figures have equal areas and perimeters; similar figures have proportional areas (scale factor squared) and proportional perimeters (scale factor).
Applications: Maps, blueprints, models, photography, engineering, architecture, and any situation requiring scaled representations.
Essential formulas and properties:

• Triangle congruence: SSS, SAS, ASA, AAS, HL

• Triangle similarity: AA, SAS, SSS

• Scale factor: k = Length₁/Length₂

• Area relationship: Area₁/Area₂ = k²

• Perimeter relationship: Perimeter₁/Perimeter₂ = k

• Volume relationship: Volume₁/Volume₂ = k³

Visualizing Scale Factor Effects
Scale Factor Impact
Analyzing how scale factor affects linear, area, and volume measurements:
Linear scales by k, area by k², volume by k³.

Analysis: The chart demonstrates how different measurements scale with the scale factor.

  • Linear measurements scale by factor k
  • Area measurements scale by factor k²
  • Volume measurements scale by factor k³

Questions & Answers

Question: I'm confused about the difference between congruent and similar figures. How can I tell them apart?

Answer: The key differences are:

  • Congruent figures: Same shape AND same size (exact copies)
  • Similar figures: Same shape BUT different sizes (proportional copies)

Think of it this way:

  • Congruent = Photocopies at 100% (identical)
  • Similar = Photocopies at different sizes (same shape, different sizes)

For triangles specifically:

  • Congruent: All sides equal AND all angles equal
  • Similar: All angles equal AND sides proportional

All congruent figures are automatically similar (with scale factor 1), but not all similar figures are congruent.

Question: How do I find the scale factor between two similar figures?

Answer: To find the scale factor between two similar figures:

  1. Identify corresponding sides: Match sides that are in the same relative position
  2. Set up the ratio: Scale factor = (length of side in image)/(length of corresponding side in preimage)
  3. Calculate: Divide the lengths to get the scale factor
  4. Verify: Check that all corresponding sides have the same ratio

Examples:

  • If a side of the larger figure is 10 and the corresponding side of the smaller is 5, scale factor = 10/5 = 2
  • If a side of the smaller figure is 3 and the corresponding side of the larger is 9, scale factor = 9/3 = 3

The scale factor tells you how much larger or smaller one figure is compared to the other.

Question: How does the scale factor affect area and perimeter of similar figures?

Answer: The scale factor affects different measurements differently:

  • Linear measurements (sides, perimeter): Scale by the same factor (k)
  • Area measurements: Scale by the square of the factor (k²)
  • Volume measurements: Scale by the cube of the factor (k³)

Examples:

  • If scale factor is 2: Perimeter doubles, Area increases by 4x, Volume increases by 8x
  • If scale factor is 3: Perimeter triples, Area increases by 9x, Volume increases by 27x

This happens because:

  • Perimeter is a 1-dimensional measurement (affected once by scale factor)
  • Area is a 2-dimensional measurement (affected twice by scale factor)
  • Volume is a 3-dimensional measurement (affected three times by scale factor)