Proportions and Similarity Ratios: 5 Detailed Exercises

Master proportions and similarity ratios: cross multiplication, geometric similarity, scale factors with these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Basic Proportion
Exercise 1
Solve the proportion: x/6 = 8/12. Then verify your solution using cross multiplication and explain how this relates to similarity ratios.
Definition:

Proportion: An equation stating that two ratios are equal. If a/b = c/d, then ad = bc (cross multiplication property).

Proportion solving method:
  1. Apply cross multiplication: multiply diagonally
  2. Solve the resulting equation for the unknown
  3. Verify by substituting back into the original proportion
  4. Connect to similarity ratios when applicable
Cross Multiply
x × 12 = 6 × 8
Solve
12x = 48
Result
x = 4
Step 1: Apply cross multiplication property

For the proportion x/6 = 8/12, cross multiply to get:

x × 12 = 6 × 8

12x = 48

Step 2: Solve for x

Divide both sides by 12:

x = 48/12 = 4

Step 3: Verify the solution

Substitute x = 4 back into the original proportion:

4/6 = 8/12

Simplify both sides: 4/6 = 2/3 and 8/12 = 2/3

Since both sides equal 2/3, the solution is verified

Step 4: Relate to similarity ratios

This proportion could represent the similarity ratio of two figures:

If two similar figures have a linear scale factor of 2:3, then corresponding sides are in the ratio 2:3

So if one side of the first figure is 4, the corresponding side of the second figure is 6

x = 4, Verification: 4/6 = 8/12 = 2/3
Final answer:

x = 4. The proportion 4/6 = 8/12 is equivalent to 2/3 = 2/3, confirming our solution. This represents a similarity ratio of 2:3.

Applied rules:

• Cross Multiplication: If a/b = c/d, then ad = bc

• Proportion Property: Equivalent ratios form valid proportions

• Similarity Ratios: Corresponding sides of similar figures are proportional

2 Similarity Ratio
Exercise 2
Triangle ABC is similar to triangle DEF with a similarity ratio of 3:5. If side AB = 9 cm, find the length of the corresponding side DE. Also, if the area of triangle ABC is 27 cm², find the area of triangle DEF.
Definition:

Similarity Ratio: The ratio of corresponding linear dimensions of similar figures. If k is the similarity ratio, then linear dimensions scale by k, areas by k², and volumes by k³.

Similarity Ratio
ABC:DEF = 3:5
Linear Scaling
AB/DE = 3/5
Area Scaling
A_ABC/A_DEF = (3/5)²
Step 1: Set up the proportion for linear dimensions

Given: Similarity ratio of ABC to DEF is 3:5

So AB/DE = 3/5

Substituting AB = 9: 9/DE = 3/5

Step 2: Solve for DE using cross multiplication

9/DE = 3/5

9 × 5 = 3 × DE

45 = 3 × DE

DE = 45/3 = 15 cm

Step 3: Calculate area of triangle DEF

For areas, the ratio is the square of the linear ratio

Area ratio = (3/5)² = 9/25

So: A_ABC/A_DEF = 9/25

27/A_DEF = 9/25

27 × 25 = 9 × A_DEF

675 = 9 × A_DEF

A_DEF = 675/9 = 75 cm²

Step 4: Verify the relationships

Linear ratio: AB/DE = 9/15 = 3/5 ✓

Area ratio: A_ABC/A_DEF = 27/75 = 9/25 = (3/5)² ✓

DE = 15cm, Area of DEF = 75cm²
Final answer:

The length of side DE is 15 cm, and the area of triangle DEF is 75 cm².

Applied rules:

• Linear Scaling: Linear dimensions scale by the similarity ratio k

• Area Scaling: Areas scale by k²

• Cross Multiplication: For solving proportions

3 Proportional Segments
Exercise 3
In triangle ABC, a line parallel to BC intersects sides AB and AC at points D and E respectively. If AD = 4 cm, DB = 6 cm, and AE = 5 cm, find the length of EC using the proportion theorem.
Definition:

Triangle Proportionality Theorem: If a line is parallel to one side of a triangle and intersects the other two sides, then it divides those sides proportionally.

Proportionality
AD/DB = AE/EC
Substitute Values
4/6 = 5/EC
Solve for EC
EC = (5×6)/4
Step 1: Apply the triangle proportionality theorem

Since DE || BC, the segments are divided proportionally

Therefore: AD/DB = AE/EC

Step 2: Substitute known values

AD = 4 cm, DB = 6 cm, AE = 5 cm

So: 4/6 = 5/EC

Step 3: Cross multiply to solve for EC

4 × EC = 6 × 5

4 × EC = 30

EC = 30/4 = 7.5 cm

Step 4: Verify the proportion

AD/DB = 4/6 = 2/3

AE/EC = 5/7.5 = 50/75 = 2/3

Since both ratios equal 2/3, the proportion is verified

Step 5: Understand the geometric significance

This theorem is fundamental to similarity, showing how parallel lines create proportional segments

It's the basis for understanding how similar triangles maintain proportional relationships

EC = 7.5cm
Final answer:

The length of segment EC is 7.5 cm. This maintains the proportion AD/DB = AE/EC = 2/3.

Applied rules:

• Triangle Proportionality Theorem: Parallel lines create proportional segments

• Cross Multiplication: For solving proportions

• Similarity: Parallel lines preserve proportional relationships

Proportion and Similarity Properties
a/b = c/d ⟺ ad = bc
Cross Multiplication Property
Proportion
a/b = c/d
Two ratios are equal
Cross Product
ad = bc
Product of extremes = means
Similarity
k = a'/a = b'/b
Linear scale factor
Area Ratio
A'/A = k²
Areas scale by k²
Key definitions:

Proportion: An equation stating that two ratios are equal. Written as a/b = c/d or a:b = c:d.

Similarity Ratio: The constant ratio of corresponding linear dimensions in similar figures.

Extremes: In the proportion a/b = c/d, a and d are the extremes.

Means: In the proportion a/b = c/d, b and c are the means.

Proportion solving methodology:
  1. Set up the proportion: Ensure corresponding quantities are in the same positions
  2. Cross multiply: Multiply the extremes and the means
  3. Solve: Use algebra to find the unknown value
  4. Verify: Substitute back to ensure the proportion is true
Tip 1: Always make sure corresponding parts are in the same position in your proportion.
Tip 2: In similarity problems, write the ratio as (figure 1):(figure 2) consistently.
Tip 3: For area problems, remember to square the linear scale factor.
Tip 4: Always verify your solution by substituting back into the original proportion.
Important Property: The product of the extremes equals the product of the means in any valid proportion.
Key Relationship: Area ratios equal the square of linear similarity ratios.
Essential proportion rules:

• Cross Multiplication: If a/b = c/d, then ad = bc

• Reciprocal Property: If a/b = c/d, then b/a = d/c

• Alternation Property: If a/b = c/d, then a/c = b/d

• Similarity Scaling: Linear by k, Area by k², Volume by k³

Solution: Exercises 4 to 5
4 Complex Proportion
Exercise 4
Two similar rectangles have areas in the ratio 16:25. If the length of the first rectangle is 8 cm, find the length of the corresponding side of the second rectangle. Also, if the width of the first rectangle is 4 cm, find the width of the second rectangle.
Definition:

Area Ratio: For similar figures, the ratio of their areas equals the square of the ratio of their corresponding linear dimensions.

Area Ratio
A₁:A₂ = 16:25
Linear Ratio
l₁:l₂ = √16:√25 = 4:5
Solve for l₂
8/l₂ = 4/5
Step 1: Find the linear scale factor from area ratio

Given: A₁/A₂ = 16/25

Since A₁/A₂ = (l₁/l₂)², we have (l₁/l₂)² = 16/25

Therefore: l₁/l₂ = √(16/25) = 4/5

Step 2: Find the length of the second rectangle

l₁/l₂ = 4/5

8/l₂ = 4/5

8 × 5 = 4 × l₂

40 = 4 × l₂

l₂ = 10 cm

Step 3: Find the width of the second rectangle

Using the same linear ratio: w₁/w₂ = 4/5

4/w₂ = 4/5

4 × 5 = 4 × w₂

20 = 4 × w₂

w₂ = 5 cm

Step 4: Verify the solution

First rectangle: 8 × 4 = 32 cm²

Second rectangle: 10 × 5 = 50 cm²

Area ratio: 32/50 = 16/25 ✓

Linear ratio: 8/10 = 4/5 and 4/5 ✓

Second rectangle: length = 10cm, width = 5cm
Final answer:

The corresponding length of the second rectangle is 10 cm, and its width is 5 cm.

Applied rules:

• Area-Linear Relationship: Area ratio = (linear ratio)²

• Cross Multiplication: For solving proportions

• Similarity Property: All linear dimensions scale by the same factor

5 Advanced Application
Exercise 5
A model airplane is built at a scale of 1:50. If the wingspan of the model is 15 cm and its length is 20 cm, find the actual dimensions of the airplane. If the model weighs 250 grams, find the weight of the actual airplane assuming the same density.
Definition:

Scale Model: A representation of an object that is proportionally larger or smaller than the actual object, using a consistent scale factor.

Scale Factor
k = 50
Linear Scaling
Actual = Model × k
Weight Scaling
Weight ∝ k³
Step 1: Interpret the scale

Scale 1:50 means 1 unit on the model represents 50 units on the actual airplane

Scale factor from model to actual = 50

Step 2: Calculate actual linear dimensions

Actual wingspan = model wingspan × scale factor

Actual wingspan = 15 × 50 = 750 cm = 7.5 m

Actual length = 20 × 50 = 1000 cm = 10 m

Step 3: Calculate weight scaling

Weight depends on volume, and volume scales by k³

Weight scale factor = k³ = 50³ = 125,000

Step 4: Calculate actual weight

Actual weight = model weight × k³

Actual weight = 250 × 125,000 = 31,250,000 g = 31,250 kg

Step 5: Verify reasonableness

Actual dimensions: 7.5m wingspan, 10m length

This is reasonable for a small aircraft

Weight of 31,250 kg is reasonable for an airplane of this size

Actual dimensions: 7.5m wingspan, 10m length, Weight: 31,250kg
Final answer:

The actual airplane has a wingspan of 7.5 meters, a length of 10 meters, and weighs approximately 31,250 kilograms.

Applied rules:

• Linear Scaling: Multiply dimensions by scale factor

• Volume/Weight Scaling: Multiply by k³ for 3D scaling

• Real-world Context: Verify reasonableness of results

Comprehensive Proportion Guide
A₂ = A₁ × (k)²
Area Scaling Formula
Comprehensive definitions:

Proportion: An equation stating that two ratios are equal (a/b = c/d). It's a fundamental concept in similarity and geometric relationships.

Similarity Ratio: The constant of proportionality between corresponding linear dimensions of similar figures. If k is the similarity ratio, then linear dimensions scale by k, areas by k², and volumes by k³.

Cross Multiplication: The fundamental property that if a/b = c/d, then ad = bc. This is the basis for solving most proportion problems.

Direct Proportionality: A relationship where two quantities increase or decrease at the same rate. If y is directly proportional to x, then y = kx for some constant k.

Complete proportion solving methodology:
  1. Identify the relationship: Determine what quantities are proportional
  2. Set up the proportion: Write the ratios with corresponding quantities aligned
  3. Cross multiply: Apply the cross multiplication property
  4. Solve algebraically: Use algebra to find unknown values
  5. Verify solution: Check that the solution maintains the proportion
Tip 1: Always ensure that corresponding parts are in the same positions in your proportion.
Tip 2: For area problems, remember that area scales as the square of linear dimensions.
Tip 3: When dealing with scale models, volume (and therefore weight) scales as the cube of the linear scale factor.
Tip 4: Always verify your answer by substituting back into the original proportion.
Tip 5: In geometric similarity, all corresponding linear measurements have the same ratio.
Common Mistakes: Misaligning corresponding parts in proportions, forgetting to square scale factors for areas, confusing linear and area scaling.
Memorization Aid: "Linear by k, Area by k², Volume by k³" - remember this sequence!
Complete proportion and similarity rules:
Measurement Type Scaling Factor Example
Length, Width, Height k Side lengths
Perimeter k Total boundary length
Area k² Surface coverage
Volume k³ Space occupied
Angles 1 Remain unchanged
Proportion and Similarity Relationships
Exercise 6: Scaling Effects
How measurements change with scale factor:
• Linear: by factor k
• Area: by factor k²
• Volume: by factor k³

Analysis: The chart shows how different measurements scale with the scale factor.

  • Linear: Changes proportionally (y = k)
  • Area: Changes quadratically (y = k²)
  • Volume: Changes cubically (y = k³)

Questions & Answers

Question: I don't understand why we square the scale factor when dealing with areas. Can you explain this concept?

Answer: This is a fundamental concept that relates to the dimensions of area measurements:

Area is a two-dimensional measurement (length × width), so it scales in two directions:

If a rectangle has length L and width W, its area is L × W

After scaling by factor k: new length = kL, new width = kW

New area = (kL) × (kW) = k²(L × W) = k² × original area

For example, if you double the dimensions of a square (k=2), its area becomes 2² = 4 times larger, not just 2 times larger.

This principle applies to any 2D shape, not just rectangles!

Question: How does cross multiplication work? Why can we multiply diagonally?

Answer: Cross multiplication is based on the fundamental property of equations:

If a/b = c/d, then multiplying both sides by bd gives:

(a/b) × bd = (c/d) × bd

This simplifies to: ad = bc

Visually, you're multiplying the "extremes" (a and d) and the "means" (b and c)

This works because we're essentially eliminating the fractions by multiplying by the common denominator, which is bd.

It's a shortcut that maintains the equality of the original proportion.

Question: How do I know if two figures are similar? What properties must they have?

Answer: Two figures are similar if and only if:

  1. Corresponding angles are equal
  2. Corresponding sides are proportional

For triangles specifically, there are shortcuts:

• AA (Angle-Angle): If two angles of one triangle equal two angles of another

• SAS (Side-Angle-Side): Two sides proportional and included angle equal

• SSS (Side-Side-Side): All three sides proportional

All corresponding linear measurements in similar figures have the same ratio!

Question: How does volume scaling work with the scale factor?

Answer: Volume is a three-dimensional measurement, so it scales in three directions:

Volume = length × width × height

If all three dimensions scale by factor k:

New Volume = (k × length) × (k × width) × (k × height) = k³ × (length × width × height) = k³ × old volume

For example, if a cube with side 2 (volume = 8) is scaled by factor 3, the new cube has side 6 (volume = 216). Notice that 216 = 8 × 3³.

This is why when you double the linear dimensions of a 3D object, its volume increases by a factor of 8!

Question: What's the best strategy for solving proportion problems?

Answer: Follow this systematic approach:

  1. Identify: Determine what quantities are proportional
  2. Align: Make sure corresponding parts are in the same positions
  3. Cross multiply: Apply the cross multiplication property
  4. Solve: Use algebra to find unknown values
  5. Verify: Check that your answer makes sense in context

Always double-check that corresponding parts are properly matched before setting up proportions. Draw diagrams when possible to visualize the relationship between the quantities.