Scale Factor: The ratio of corresponding linear dimensions in similar figures. If k > 1, it's an enlargement; if k < 1, it's a reduction.
- Identify the scale factor
- Multiply each linear dimension by the scale factor
- Determine if it's enlargement (k > 1) or reduction (k < 1)
- Calculate area ratio as k²
New side 1 = 3 × 2 = 6 cm
New side 2 = 4 × 2 = 8 cm
New side 3 = 5 × 2 = 10 cm
Since scale factor k = 2 > 1, this is an enlargement
Area ratio = k² = 2² = 4
The area of the new triangle is 4 times the area of the original
Original area = ½ × 3 × 4 = 6 cm² (since it's a right triangle)
New area = ½ × 6 × 8 = 24 cm²
Area ratio = 24/6 = 4 ✓
The new triangle has sides of 6 cm, 8 cm, and 10 cm. This is an enlargement since the scale factor is greater than 1. The ratio of their areas is 4:1.
• Linear Scaling: Multiply dimensions by scale factor k
• Area Scaling: Multiply by k²
• Volume Scaling: Multiply by k³
Reduction: A transformation where the scale factor is less than 1, resulting in a smaller image.
New length = 12 × (1/3) = 4 cm
New width = 8 × (1/3) = 8/3 ≈ 2.67 cm
Since k = 1/3 < 1, this is a reduction
Original perimeter = 2(12 + 8) = 40 cm
New perimeter = 2(4 + 8/3) = 2(20/3) = 40/3 cm
Perimeter ratio = (40/3)/40 = 1/3 = k ✓
Original area = 12 × 8 = 96 cm²
New area = 4 × (8/3) = 32/3 cm²
Area ratio = (32/3)/96 = 32/288 = 1/9 = k² ✓
Linear ratio = 1/3 ✓
Area ratio = (1/3)² = 1/9 ✓
Perimeter ratio = 1/3 (same as linear ratio) ✓
The new rectangle has dimensions 4 cm by 8/3 cm (approximately 2.67 cm). This is a reduction. The perimeter ratio is 1:3 and the area ratio is 1:9.
• Linear Scaling: Perimeters scale by k
• Area Scaling: Areas scale by k²
• Reduction: k < 1 results in smaller figure
Area Scaling: When a figure is scaled by a factor k, its area changes by a factor of k².
Area of square = side²
25 = side²
Original side = √25 = 5 cm
New side = original side × scale factor
New side = 5 × 3 = 15 cm
New area = (new side)² = 15² = 225 cm²
New area = original area × k²
New area = 25 × 3² = 25 × 9 = 225 cm² ✓
Area ratio = 225/25 = 9 = 3² = k² ✓
This confirms that area scales by k²
The area of the new square is 225 cm². This verifies that when a figure is scaled by a factor k, its area changes by a factor of k².
• Area Scaling: A₂ = A₁ × k²
• Linear Scaling: Side₂ = Side₁ × k
• Square Area: Area = side²
Scale Factor (k): The ratio of corresponding linear dimensions in similar figures. k = new dimension / original dimension.
Enlargement: A transformation where k > 1, making the figure larger.
Reduction: A transformation where k < 1, making the figure smaller.
Similar Figures: Figures that have the same shape but different sizes, with proportional corresponding sides and equal corresponding angles.
- Identify the scale factor: Determine if it's enlargement (k > 1) or reduction (k < 1)
- Apply to linear dimensions: Multiply by k
- Apply to areas: Multiply by k²
- Apply to volumes: Multiply by k³
- Verify relationships: Check that all scaling follows the rules
• Linear Scaling: Multiply linear dimensions by k
• Area Scaling: Multiply areas by k²
• Volume Scaling: Multiply volumes by k³
• Angle Preservation: Angles remain unchanged in similar figures
Volume Scaling: When a 3D figure is scaled by a factor k, its volume changes by a factor of k³.
New volume = original volume × k³
V₂ = 8 × (2.5)³
V₂ = 8 × 15.625 = 125 cm³
For a cube: V = s³
8 = s³
Original side = ∛8 = 2 cm
New side = original side × k
New side = 2 × 2.5 = 5 cm
New volume = (new side)³ = 5³ = 125 cm³ ✓
Original surface area = 6s² = 6 × 2² = 24 cm²
New surface area = 6s² = 6 × 5² = 150 cm²
Surface area ratio = 150/24 = 6.25 = (2.5)² = k²
The volume of the new cube is 125 cm³. The ratio of their surface areas is 6.25:1 (or 25:4).
• Volume Scaling: V₂ = V₁ × k³
• Surface Area Scaling: SA₂ = SA₁ × k²
• Cube Volume: V = s³
Scale Model: A representation of an object that is proportionally larger or smaller than the actual object, using a consistent scale factor.
Scale 1:24 means 1 unit on the model represents 24 units on the actual car
Scale factor from model to actual = 24
Actual length = 7 × 24 = 168 cm
Actual width = 3 × 24 = 72 cm
Actual height = 2.5 × 24 = 60 cm
Since weight depends on volume, and volume scales by k³
Weight scale factor = k³ = 24³ = 13,824
Actual weight = model weight × k³
Actual weight = 100 × 13,824 = 1,382,400 g = 1,382.4 kg
Actual dimensions: 168 cm × 72 cm × 60 cm ≈ 1.68 m × 0.72 m × 0.60 m
This is a reasonable car size
Weight of 1,382.4 kg is reasonable for a car
The actual car dimensions are 168 cm long, 72 cm wide, and 60 cm tall. The estimated weight of the actual car is approximately 1,382 kg.
• Linear Scaling: Multiply dimensions by scale factor
• Volume/Weight Scaling: Multiply by k³ for 3D scaling
• Real-world Context: Verify reasonableness of results
Scale Factor (k): The constant of proportionality between corresponding linear dimensions of similar figures. It represents how much larger or smaller one figure is compared to another.
Similarity Transformation: A geometric transformation that preserves shape but not necessarily size, characterized by a uniform scale factor.
Enlargement: A similarity transformation where k > 1, resulting in a larger image.
Reduction: A similarity transformation where k < 1, resulting in a smaller image.
- Identify the scale factor: Determine k from given information
- Classify transformation: Determine if enlargement (k > 1) or reduction (k < 1)
- Apply appropriate scaling: Use k, k², or k³ depending on measurement type
- Calculate unknowns: Use proportions and scaling relationships
- Verify solution: Check that all relationships are consistent
| Measurement Type | Scaling Factor | Example |
|---|---|---|
| Length, Width, Height | k | Side lengths |
| Perimeter | k | Total boundary length |
| Area | k² | Surface coverage |
| Volume | k³ | Space occupied |
| Angles | 1 | Remain unchanged |
• Linear: changes by factor k
• Area: changes by factor k²
• Volume: changes by factor k³
Analysis: The chart shows how different measurements scale with the scale factor.
- Linear: Changes proportionally (y = k)
- Area: Changes quadratically (y = k²)
- Volume: Changes cubically (y = k³)