Solved Exercises on Similar Figures and Scale Factors in Grade 8

Master similar figures and scale factors: identifying similarity, finding scale factors, calculating missing dimensions, and solving real-world problems through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Identifying Similar Figures
Exercise 1
Determine if triangles ABC and DEF are similar. Triangle ABC has sides AB = 6 cm, BC = 8 cm, AC = 10 cm. Triangle DEF has sides DE = 9 cm, EF = 12 cm, DF = 15 cm.
Definition:

Similar Figures: Two figures are similar if their corresponding angles are congruent and their corresponding sides are proportional.

Scale Factor: The ratio of corresponding side lengths in similar figures.

Similarity Method:
  1. Identify corresponding sides in both figures
  2. Calculate the ratio of each pair of corresponding sides
  3. Check if all ratios are equal
  4. If ratios are equal, figures are similar; if not, they are not similar
Triangle ABC
6, 8, 10
Triangle DEF
9, 12, 15
Ratios
2:3
Step 1: Identify corresponding sides

Assuming correspondence: AB corresponds to DE, BC to EF, AC to DF

Triangle ABC: AB = 6 cm, BC = 8 cm, AC = 10 cm

Triangle DEF: DE = 9 cm, EF = 12 cm, DF = 15 cm

Step 2: Calculate ratios of corresponding sides

Ratio of AB to DE: 6/9 = 2/3

Ratio of BC to EF: 8/12 = 2/3

Ratio of AC to DF: 10/15 = 2/3

Step 3: Compare the ratios

All three ratios are equal: 2/3 = 2/3 = 2/3

Since all ratios are equal, the triangles are similar

Step 4: Determine the scale factor

The scale factor from triangle ABC to triangle DEF is 3/2

The scale factor from triangle DEF to triangle ABC is 2/3

Yes, triangles are similar with scale factor 2:3
Final answer:

Yes, triangles ABC and DEF are similar. The scale factor from ABC to DEF is 3/2 (or 1.5), and from DEF to ABC is 2/3.

Applied rules:

• Similarity Condition: Corresponding sides must be proportional

• Proportionality: All ratios of corresponding sides must be equal

• Scale Factor: Consistent ratio between corresponding sides

2 Finding Missing Dimensions
Exercise 2
Rectangle PQRS is similar to rectangle WXYZ. If PQ = 8 cm, QR = 6 cm, and WX = 12 cm, find the length of XY.
Proportional Sides:

Corresponding Sides: In similar figures, corresponding sides are in the same position and have the same relative orientation.

Proportion: When two ratios are equal, they form a proportion.

Given
PQ=8, QR=6, WX=12
Find
XY
Scale Factor
3:2
Step 1: Identify corresponding sides

Since rectangles PQRS ~ WXYZ, corresponding sides are:

PQ corresponds to WX, and QR corresponds to XY

Step 2: Set up the proportion

PQ/WX = QR/XY

8/12 = 6/XY

Step 3: Cross multiply to solve for XY

8 × XY = 12 × 6

8 × XY = 72

XY = 72/8 = 9

Step 4: Verify the scale factor

Scale factor from PQRS to WXYZ: 12/8 = 3/2

Scale factor for QR to XY: 9/6 = 3/2

Both ratios are equal ✓

XY = 9 cm
Final answer:

The length of XY is 9 cm. The scale factor from rectangle PQRS to WXYZ is 3:2.

Applied rules:

• Corresponding Sides: Set up proportions using corresponding sides

• Cross Multiplication: Solve proportions by cross multiplying

• Verification: Check that scale factor is consistent across all sides

3 Scale Factor Calculations
Exercise 3
A map has a scale of 1 inch representing 5 miles. If two cities are 3.5 inches apart on the map, how far are they in reality? Also, if two mountains are 45 miles apart in reality, how far apart are they on the map?
Scale Factor Applications:

Map Scale: A ratio that compares distances on a map to actual distances.

Proportional Reasoning: Using equivalent ratios to solve real-world problems.

Scale
1 in : 5 mi
Part A
3.5 in → ? mi
Part B
? in → 45 mi
Step 1: Understand the scale factor

Scale: 1 inch on map = 5 miles in reality

Scale factor from map to reality: 5 (multiply by 5)

Scale factor from reality to map: 1/5 (divide by 5)

Step 2: Part A - Map distance to actual distance

Map distance: 3.5 inches

Actual distance = 3.5 × 5 = 17.5 miles

Step 3: Part B - Actual distance to map distance

Actual distance: 45 miles

Map distance = 45 ÷ 5 = 9 inches

Step 4: Verify with proportions

Part A: 1/5 = 3.5/x → x = 17.5 ✓

Part B: 1/5 = y/45 → y = 9 ✓

Part A: 17.5 miles, Part B: 9 inches
Final answer:

The cities are 17.5 miles apart in reality. The mountains are 9 inches apart on the map.

Applied rules:

• Scale Factor: Convert between model and actual sizes

• Proportional Reasoning: Set up and solve proportions

• Unit Conversion: Maintain consistent units in calculations

Similarity Rules and Properties
\(Scale \, Factor = \frac{New \, Size}{Original \, Size}\)
Scale Factor Formula
\(Corresponding \, Sides \, Proportional: \frac{a_1}{a_2} = \frac{b_1}{b_2} = \frac{c_1}{c_2}\)
Similarity Condition
Scale Factor
k = New/Old
k > 1: Enlargement
Area Scaling
A' = k² × A
Area changes by k²
Volume Scaling
V' = k³ × V
Volume changes by k³
Perimeter Scaling
P' = k × P
Perimeter changes by k
Similar Figures Properties: Corresponding angles are equal, sides are proportional
Scale Factor Direction: k from A to B, 1/k from B to A
Proportional Reasoning: All corresponding parts maintain the same ratio
Solution: Exercises 4 to 5
4 Area and Perimeter Scaling
Exercise 4
A triangle has an area of 24 cm² and a perimeter of 20 cm. If the triangle is dilated with a scale factor of 3, what are the area and perimeter of the new triangle?
Dimensional Scaling:

Linear Dimensions: Scale by factor k (perimeter, side lengths)

Area: Scales by factor k²

Volume: Scales by factor k³

Original
A=24, P=20
Scale Factor
k=3
New Values
A'=216, P'=60
Step 1: Identify the scale factor

Scale factor k = 3

Step 2: Calculate new perimeter

Perimeter scales linearly by factor k

New perimeter = Original perimeter × k

New perimeter = 20 × 3 = 60 cm

Step 3: Calculate new area

Area scales by factor k²

New area = Original area × k²

New area = 24 × 3² = 24 × 9 = 216 cm²

Step 4: Verify the relationship

Side lengths scale by k = 3

Perimeter (sum of sides) scales by k = 3

Area (product of two dimensions) scales by k² = 9

New area = 216 cm², New perimeter = 60 cm
Final answer:

The new triangle has an area of 216 cm² and a perimeter of 60 cm.

Applied rules:

• Perimeter Scaling: Linear dimensions scale by factor k

• Area Scaling: Area scales by factor k²

• Dimensional Analysis: Area involves two dimensions, so squares the scale factor

5 Real-World Application
Exercise 5
An architect creates a scale model of a building where 1 cm represents 50 cm of the actual building. If the model is 20 cm tall and 15 cm wide, what are the actual dimensions of the building? If the model has a surface area of 1200 cm², what is the actual surface area?
Scale Model Applications:

Architectural Scales: Ratios used to represent large structures in smaller, manageable models.

Surface Area Scaling: Surface area scales by the square of the linear scale factor.

Scale
1 cm : 50 cm
Model Dimensions
20 cm × 15 cm
Actual Dimensions
1000 cm × 750 cm
Step 1: Identify the scale factor

Scale: 1 cm model = 50 cm actual

Scale factor from model to actual: 50

Scale factor from actual to model: 1/50

Step 2: Calculate actual height

Model height = 20 cm

Actual height = 20 × 50 = 1000 cm = 10 m

Step 3: Calculate actual width

Model width = 15 cm

Actual width = 15 × 50 = 750 cm = 7.5 m

Step 4: Calculate actual surface area

Model surface area = 1200 cm²

Surface area scales by k² where k = 50

Actual surface area = 1200 × 50² = 1200 × 2500 = 3,000,000 cm²

Convert to m²: 3,000,000 cm² = 300 m²

Actual dimensions: 10m × 7.5m, Surface area: 300 m²
Final answer:

The actual building is 10 meters tall and 7.5 meters wide. The actual surface area is 300 m².

Applied rules:

• Linear Scaling: Actual dimension = Model dimension × scale factor

• Area Scaling: Actual area = Model area × (scale factor)²

• Unit Conversion: Convert cm² to m² when needed

Similar Figures Laws, Methods, Definitions
\(k = \frac{a'}{a} = \frac{b'}{b} = \frac{c'}{c}\)
Scale Factor Proportion
\(A' = k^2 \times A, P' = k \times P\)
Area and Perimeter Scaling
Key definitions:

Similar Figures: Figures that have the same shape but not necessarily the same size. Corresponding angles are equal and corresponding sides are proportional.

Scale Factor: The ratio of corresponding side lengths in similar figures. It describes how much a figure has been enlarged or reduced.

Corresponding Parts: Sides or angles that are in the same relative position in similar figures.

Proportion: An equation stating that two ratios are equal.

Complete methodology:
  1. Identify Corresponding Parts: Match up sides and angles in similar figures
  2. Set Up Proportions: Write ratios of corresponding sides
  3. Solve for Unknowns: Use cross multiplication to find missing values
  4. Apply Scale Factor: Use scale factor to find other measurements
  5. Verify Results: Check that proportions are maintained
Tip 1: Always identify corresponding sides before setting up proportions.
Tip 2: Scale factor k > 1 creates enlargement, k < 1 creates reduction.
Tip 3: Area scales by k², perimeter by k, volume by k³.
Tip 4: Cross multiply to solve proportions: a/b = c/d → a×d = b×c.
Tip 5: Always check that your answer makes sense in the context of the problem.
Common errors: Mixing up corresponding sides, forgetting to square the scale factor for area, incorrect cross multiplication.
Exam preparation: Practice identifying corresponding parts, memorize scaling relationships, work on unit conversions.
Formulas to know by heart:

• Scale Factor: k = New Size / Original Size

• Corresponding Sides Proportional: a₁/a₂ = b₁/b₂ = c₁/c₂

• Area Scaling: A' = k² × A

• Perimeter Scaling: P' = k × P

• Volume Scaling: V' = k³ × V

Scale Factor Effects Visualization
Dimensional Scaling
Visualization of how different dimensions scale with the scale factor:
• Linear dimensions scale by k
• Area scales by k²
• Volume scales by k³

Analysis: The chart shows how different measurements scale with the scale factor.

  • Linear dimensions (length, width, height) scale directly with k
  • Area scales with k² (involves two dimensions)
  • Volume scales with k³ (involves three dimensions)
  • The effect becomes more pronounced with higher dimensions

Questions & Answers

Question: How do I know which sides correspond to each other in similar figures?

Answer: Here are strategies to identify corresponding sides:

  • Vertex Order: If triangle ABC ~ triangle DEF, then A corresponds to D, B to E, C to F
  • Side Position: Look for sides in the same relative position (top, bottom, left, right)
  • Angle Matching: Sides between equal angles are corresponding sides
  • Size Order: Longest sides correspond to each other, shortest sides correspond to each other

When figures are drawn in the same orientation, corresponding parts are in matching positions.

Question: Why does area scale by k² instead of just k like perimeter?

Answer: This happens because area involves two dimensions:

  • Perimeter: Measures distance around (linear, one dimension)
  • Area: Measures space inside (length × width, two dimensions)

Example: If you scale a rectangle by factor k:

  • Original: length = l, width = w
  • Scaled: length = kl, width = kw
  • Original area: l × w
  • Scaled area: (kl) × (kw) = k²(lw)

Since area involves multiplying two scaled dimensions, the scale factor appears twice (k²).

Question: What's the difference between saying two figures are similar and saying they are congruent?

Answer: The key differences are:

  • Congruent: Same shape AND same size (scale factor = 1)
  • Similar: Same shape BUT different size (scale factor ≠ 1)

For congruent figures:

  • Corresponding sides are equal in length
  • Corresponding angles are equal in measure
  • Figures are identical in every way

For similar figures:

  • Corresponding sides are proportional (not equal)
  • Corresponding angles are equal in measure
  • Figures have the same shape but different sizes

All congruent figures are similar, but not all similar figures are congruent.