Similar Triangles: Triangles with corresponding angles equal and corresponding sides proportional. When objects cast shadows at the same time, the sun creates similar triangles.
- Identify the similar triangles formed by objects and their shadows
- Set up a proportion with corresponding sides
- Solve for the unknown measurement
- Verify the solution makes sense in context
When the sun shines, it creates similar triangles:
Triangle 1: Person (height 1.8m) and shadow (2.4m)
Triangle 2: Flagpole (height h) and shadow (12m)
Since the triangles are similar, corresponding sides are proportional:
(Person height)/(Flagpole height) = (Person shadow)/(Flagpole shadow)
1.8/h = 2.4/12
1.8 × 12 = h × 2.4
21.6 = 2.4h
h = 21.6/2.4 = 9 meters
Check: 1.8/9 = 2.4/12
0.2 = 0.2 ✓
The ratio of heights equals the ratio of shadows
The height of the flagpole is 9 meters. This solution makes sense because the flagpole's shadow is 5 times longer than the person's shadow, so the flagpole should be 5 times taller (1.8 × 5 = 9).
• Similarity: Objects at the same time create similar triangles
• Proportion Property: Corresponding sides of similar triangles are proportional
• Cross Multiplication: For solving proportions
Scale Factor: The ratio of model dimensions to actual dimensions. Linear measurements scale by k, areas by k², and volumes by k³.
Given: 1 cm represents 5 m
5 m = 500 cm
So the scale factor from model to actual = 500
Model height = 24 cm
Actual height = Model height × scale factor
Actual height = 24 × 500 = 12,000 cm = 120 m
For areas, scale by k²
Model area = 40 cm²
Actual area = Model area × (scale factor)²
Actual area = 40 × (500)² = 40 × 250,000 = 10,000,000 cm²
Actual area = 1,000 m²
Height ratio: 24/12,000 = 1/500 ✓
Area ratio: 40/10,000,000 = 1/250,000 = (1/500)² ✓
The actual building is 120 meters tall with a base area of 1,000 square meters.
• Linear Scaling: Multiply by scale factor k
• Area Scaling: Multiply by k²
• Volume Scaling: Multiply by k³
Indirect Measurement: Using geometric properties (especially similar triangles) to measure distances that cannot be measured directly.
We have a right triangle ABC where:
∠B = 90° (right angle at B)
∠A = 60° (measured angle)
AB = 50 m (measured distance along bank)
BC = width of river (unknown)
In right triangle ABC:
tan(∠A) = opposite side / adjacent side
tan(60°) = BC / AB
√3 = BC / 50
BC = 50 × tan(60°)
BC = 50 × √3
BC = 50 × 1.732 ≈ 86.6 meters
We can create similar triangles by using the fact that a 30-60-90 triangle has sides in the ratio 1:√3:2
This confirms our calculation since tan(60°) = √3/1 = √3
The width of the river is approximately 86.6 meters.
• Trigonometric Ratios: tan = opposite/adjacent
• Special Angles: tan(60°) = √3
• Right Triangle Properties: SOH-CAH-TOA relationships
Similar Figures: Figures that have the same shape but not necessarily the same size. All corresponding angles are equal, and all corresponding sides are proportional.
Scale Factor: The ratio of corresponding linear dimensions of similar figures.
Indirect Measurement: Using geometric properties to measure distances that cannot be measured directly.
Proportion: An equation stating that two ratios are equal.
- Identify similar figures: Look for triangles formed by shadows, mirrors, or parallel lines
- Set up proportions: Match corresponding parts in the same positions
- Solve systematically: Use cross multiplication and algebra
- Verify reasonableness: Check if the answer makes sense in context
• Corresponding Angles: Equal in similar figures
• Corresponding Sides: Proportional in similar figures
• Scale Factors: Linear by k, Area by k², Volume by k³
• Proportions: Cross multiply to solve
Angle of Elevation: The angle between the horizontal line and the line of sight to an object above the horizontal.
For the bridge support:
tan(30°) = height / distance from base
tan(30°) = h / 100
h = 100 × tan(30°)
h = 100 × (1/√3) = 100/√3 ≈ 57.74 meters
The stick and its shadow form a triangle similar to the bridge support triangle:
Stick height / Stick shadow = Bridge height / Bridge shadow
2 / 3.46 = h / (distance to bridge shadow)
Since tan(30°) = 2/3.46 ≈ 0.577, this confirms our calculation
We can also use the fact that tan(30°) = 1/√3 ≈ 0.577
h = 100 × 0.577 ≈ 57.7 meters
Shadow ratio = 2/3.46 ≈ 0.577
If the bridge creates a shadow of length x, then:
h/x = 2/3.46
h = (2 × x)/3.46
Using the angle of elevation, x = h/tan(30°) = h√3
So: h = (2 × h√3)/3.46 = (2h√3)/3.46
This confirms our solution
The height of the bridge support is approximately 57.74 meters.
• Trigonometric Ratios: tan = opposite/adjacent
• Special Angles: tan(30°) = 1/√3
• Similar Triangles: Shadow method verification
Similar Triangles: Triangles with equal corresponding angles and proportional corresponding sides.
Original longest side = 10m
New longest side = 25m
Scale factor k = 25/10 = 2.5
New side 1 = 6 × 2.5 = 15m
New side 2 = 8 × 2.5 = 20m
New side 3 = 10 × 2.5 = 25m
For similar figures, area ratio = (scale factor)²
Area ratio = (2.5)² = 6.25
Check: 6/15 = 8/20 = 10/25 = 1/2.5 = 0.4 ✓
The ratios are equal, confirming similarity
Original triangle is a right triangle (6² + 8² = 10²)
New triangle: 15² + 20² = 225 + 400 = 625 = 25²
This confirms the new triangle is also a right triangle, maintaining the same shape
The new room has dimensions of 15m, 20m, and 25m. The area ratio of the new room to the original is 6.25:1.
• Similarity: Corresponding sides are proportional
• Area Scaling: Areas scale by k²
• Right Triangle: Maintains shape with similarity
Similarity Transformation: A transformation that changes the size but not the shape of a figure, preserving all angle measures and maintaining proportional relationships between corresponding parts.
Scale Factor: The constant of proportionality between corresponding linear dimensions of similar figures. If k > 1, it's an enlargement; if k < 1, it's a reduction.
Indirect Measurement: The process of determining distances, heights, or other measurements using geometric properties and similar figures, especially when direct measurement is impractical or impossible.
Proportional Reasoning: The ability to understand and work with relationships between quantities that maintain a constant ratio.
- Model the situation: Represent the real-world scenario with geometric figures
- Identify similar figures: Find triangles or other shapes that are similar
- Set up proportions: Create equations using corresponding parts
- Solve systematically: Use algebra to find unknown values
- Verify reasonableness: Check if the answer makes sense in context
| Measurement Type | Scaling Factor | Example |
|---|---|---|
| Length, Width, Height | k | Sides of similar triangles |
| Perimeter | k | Boundary length |
| Area | k² | Surface coverage |
| Volume | k³ | Space occupied |
| Angles | 1 | Remain unchanged |
• Architecture: 1:100 to 1:500
• Engineering: 1:10 to 1:50
• Surveying: 1:1 (actual scale)
• Photography: Variable magnification
Analysis: The chart shows how different applications use various scale factors.
- Architecture: Large reductions for building plans
- Engineering: Moderate reductions for detailed drawings
- Surveying: Actual measurements (no scaling)
- Photography: Variable magnification for details