Understanding Similar Figures: 5 Detailed Exercises

Master similar figures: ratios, proportions, scale factors with these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Basic Similarity Check
Exercise 1
Triangle ABC has sides of lengths 6, 8, and 10. Triangle DEF has sides of lengths 9, 12, and 15. Determine if these triangles are similar and find the scale factor.
Definition:

Similar Figures: Two figures are similar if their corresponding angles are equal and their corresponding sides are proportional.

Similarity verification method:
  1. Arrange corresponding sides in order
  2. Calculate the ratio of each pair of corresponding sides
  3. Check if all ratios are equal
  4. Identify the scale factor if similar
Side Ratios
6/9 = 8/12 = 10/15
Simplify
2/3 = 2/3 = 2/3
Scale Factor
k = 2/3
Step 1: Arrange corresponding sides

Triangle ABC: 6, 8, 10

Triangle DEF: 9, 12, 15

Corresponding sides: 6→9, 8→12, 10→15

Step 2: Calculate ratios of corresponding sides

Ratio 1: 6/9 = 2/3

Ratio 2: 8/12 = 2/3

Ratio 3: 10/15 = 2/3

Step 3: Check if ratios are equal

All ratios equal 2/3, so triangles are similar

Step 4: Identify the scale factor

Scale factor k = 2/3 (from ABC to DEF)

This means triangle DEF is 3/2 times larger than triangle ABC

Step 5: Verify with the original sides

ABC × (3/2) = DEF: 6×(3/2)=9, 8×(3/2)=12, 10×(3/2)=15 ✓

Triangles are similar, Scale factor = 2/3
Final answer:

Yes, the triangles are similar. The scale factor is 2/3, meaning each side of triangle ABC is 2/3 the length of the corresponding side in triangle DEF.

Applied rules:

• Similarity Criterion: All corresponding sides must be proportional

• Scale Factor: Ratio of corresponding sides

• Proportional Relationships: Cross multiply to verify

2 Scale Factor Application
Exercise 2
Rectangle PQRS has dimensions 4 cm by 6 cm. Rectangle WXYZ is similar to PQRS with a scale factor of 3:2. Find the dimensions of rectangle WXYZ and the ratio of their perimeters and areas.
Definition:

Scale Factor: The ratio of corresponding linear dimensions of similar figures. If k is the scale factor, then linear dimensions scale by k, areas by k², and volumes by k³.

Original Dimensions
PQRS: 4cm × 6cm
Scale Factor
k = 3/2
New Dimensions
WXYZ: 6cm × 9cm
Step 1: Apply scale factor to dimensions

Scale factor = 3:2, so k = 3/2

Length of WXYZ = 6 × (3/2) = 9 cm

Width of WXYZ = 4 × (3/2) = 6 cm

Step 2: Calculate perimeters

Perimeter of PQRS = 2(4 + 6) = 20 cm

Perimeter of WXYZ = 2(6 + 9) = 30 cm

Ratio of perimeters = 30:20 = 3:2

Step 3: Calculate areas

Area of PQRS = 4 × 6 = 24 cm²

Area of WXYZ = 6 × 9 = 54 cm²

Ratio of areas = 54:24 = 9:4 = (3/2)²

Step 4: Verify relationships

Perimeter ratio = scale factor = 3:2 ✓

Area ratio = (scale factor)² = (3/2)² = 9:4 ✓

Step 5: State the relationships

For similar figures with scale factor k:

Linear dimensions scale by k

Areas scale by k²

Perimeters scale by k

WXYZ: 6cm × 9cm, Perimeter ratio: 3:2, Area ratio: 9:4
Final answer:

Rectangle WXYZ has dimensions 6 cm by 9 cm. The ratio of perimeters is 3:2, and the ratio of areas is 9:4.

Applied rules:

• Scale Factor: Multiplies linear dimensions

• Perimeter Scaling: Scales by the same factor as linear dimensions

• Area Scaling: Scales by the square of the linear scale factor

3 Proportional Relationships
Exercise 3
Two similar pentagons have corresponding sides in the ratio 5:7. If the area of the smaller pentagon is 100 cm², find the area of the larger pentagon. Also, if the perimeter of the smaller pentagon is 40 cm, find the perimeter of the larger pentagon.
Definition:

Proportional Relationships: For similar figures, if the scale factor is k, then linear dimensions scale by k, areas scale by k², and volumes scale by k³.

Scale Factor
k = 5/7
Area Scaling
A₂ = A₁ × (k₂/k₁)²
Perimeter Scaling
P₂ = P₁ × (k₂/k₁)
Step 1: Identify the scale factor

Given ratio of corresponding sides = 5:7

So the scale factor from smaller to larger = 7/5

Step 2: Calculate the area of the larger pentagon

For areas: A_large = A_small × (scale factor)²

A_large = 100 × (7/5)²

A_large = 100 × 49/25

A_large = 196 cm²

Step 3: Calculate the perimeter of the larger pentagon

For perimeters: P_large = P_small × scale factor

P_large = 40 × 7/5

P_large = 56 cm

Step 4: Verify the relationships

Area ratio = 196:100 = 49:25 = (7:5)² ✓

Perimeter ratio = 56:40 = 7:5 ✓

Step 5: Generalize the relationships

For any similar figures with linear scale factor k:

Linear dimensions: multiply by k

Areas: multiply by k²

Perimeters: multiply by k

Larger area = 196cm², Larger perimeter = 56cm
Final answer:

The area of the larger pentagon is 196 cm², and its perimeter is 56 cm.

Applied rules:

• Area Scaling: Areas scale by the square of the linear scale factor

• Perimeter Scaling: Perimeters scale by the linear scale factor

• Proportional Relationships: Maintain consistent ratios

Similarity Concepts and Properties
k = a₂/a₁ = b₂/b₁ = c₂/c₁
Scale Factor Definition
Scale Factor
k = a₂/a₁
Ratio of corresponding sides
Area Scaling
A₂ = A₁ × k²
Areas scale by k²
Perimeter Scaling
P₂ = P₁ × k
Perimeters scale by k
Volume Scaling
V₂ = V₁ × k³
Volumes scale by k³
Key definitions:

Similar Figures: Figures that have the same shape but not necessarily the same size. Corresponding angles are equal and corresponding sides are proportional.

Scale Factor: The ratio of the lengths of corresponding sides of similar figures.

Corresponding Parts: Parts of similar figures that are in the same relative position.

Proportion: An equation stating that two ratios are equal.

Similarity verification methodology:
  1. Identify corresponding parts: Match vertices and sides
  2. Check angles: Verify corresponding angles are equal
  3. Check sides: Verify corresponding sides are proportional
  4. Calculate scale factor: Find the ratio of corresponding sides
  5. Apply relationships: Use scale factor for other measurements
Tip 1: Always arrange corresponding sides in the same order when checking proportions.
Tip 2: For areas, scale factor is squared; for perimeters, it's linear.
Tip 3: All circles are similar to each other.
Tip 4: All squares are similar to each other.
Important Property: If two figures are similar, then all corresponding linear measurements have the same ratio.
Key Relationship: Area scales as the square of the linear scale factor.
Essential similarity rules:

• AA Similarity: Two angles equal implies similarity (for triangles)

• SSS Similarity: All sides proportional implies similarity

• SAS Similarity: Two sides proportional and included angle equal

• Scale Relationships: Linear by k, Area by k², Volume by k³

Solution: Exercises 4 to 5
4 Real-world Application
Exercise 4
A map uses a scale of 1:50,000. If the distance between two cities on the map is 8 cm, what is the actual distance between the cities? Also, if a park on the map has an area of 6 cm², what is the actual area of the park?
Definition:

Map Scale: A ratio that compares distances on the map to actual distances in the real world. A scale of 1:50,000 means 1 unit on the map represents 50,000 units in reality.

Map Scale
1:50,000
Distance Calculation
Actual = Map × 50,000
Area Calculation
Actual Area = Map Area × (50,000)²
Step 1: Understand the scale factor

Scale 1:50,000 means 1 cm on map = 50,000 cm in reality

Linear scale factor k = 50,000

Step 2: Calculate actual distance

Map distance = 8 cm

Actual distance = 8 × 50,000 = 400,000 cm

Convert to km: 400,000 cm = 4,000 m = 4 km

Step 3: Calculate actual area

Map area = 6 cm²

For areas, use k²: Actual area = 6 × (50,000)²

Actual area = 6 × 2,500,000,000 = 15,000,000,000 cm²

Convert to km²: 15,000,000,000 cm² = 1.5 km²

Step 4: Verify the relationships

Linear: 1 cm → 50,000 cm (factor of 50,000)

Area: 1 cm² → (50,000)² cm² = 2,500,000,000 cm² (factor of k²)

Step 5: Check dimensional consistency

Distance: cm → km ✓

Area: cm² → km² ✓

Distance = 4km, Area = 1.5km²
Final answer:

The actual distance between the cities is 4 km, and the actual area of the park is 1.5 km².

Applied rules:

• Scale Factor: Multiplies linear measurements

• Area Scaling: Multiplies by the square of the scale factor

• Unit Conversion: Convert to appropriate real-world units

5 Advanced Proportion Problem
Exercise 5
Two similar triangles have perimeters in the ratio 3:5. If the area of the smaller triangle is 27 cm², find the area of the larger triangle. Also, if the height of the smaller triangle is 6 cm, find the height of the larger triangle.
Definition:

Perimeter-Linear Relationship: For similar figures, the ratio of perimeters equals the ratio of corresponding linear dimensions.

Perimeter Ratio
P₁:P₂ = 3:5
Scale Factor
k = 3/5
Area Relationship
A₂ = A₁ × (5/3)²
Step 1: Determine the scale factor from perimeter ratio

Since perimeters of similar figures are proportional to linear dimensions

Perimeter ratio = 3:5

Therefore, linear scale factor = 3:5

From smaller to larger: k = 5/3

Step 2: Calculate the area of the larger triangle

Area scales by k²

A_larger = A_smaller × (5/3)²

A_larger = 27 × 25/9

A_larger = 75 cm²

Step 3: Calculate the height of the larger triangle

Heights scale by the linear scale factor k

h_larger = h_smaller × 5/3

h_larger = 6 × 5/3

h_larger = 10 cm

Step 4: Verify the relationships

Linear dimensions (including height): 6:10 = 3:5 ✓

Areas: 27:75 = 9:25 = 3²:5² ✓

Perimeters: 3:5 (given) ✓

Step 5: Generalize the solution

For any similar figures:

Linear dimensions: scale by k

Areas: scale by k²

Perimeters: scale by k

When given perimeter ratio, it equals linear dimension ratio

Larger area = 75cm², Larger height = 10cm
Final answer:

The area of the larger triangle is 75 cm², and its height is 10 cm.

Applied rules:

• Perimeter-Linearity: Perimeter ratio equals linear dimension ratio

• Area Scaling: Areas scale by the square of the linear scale factor

• Linear Scaling: Heights scale by the linear scale factor

Comprehensive Similarity Guide
A₂ = A₁ × (k)²
Area Scaling Formula
Comprehensive definitions:

Similar Figures: Geometric figures that have the same shape but not necessarily the same size. All corresponding angles are equal, and all corresponding sides are in proportion.

Scale Factor: The constant ratio between corresponding linear measurements of similar figures. If k is the scale factor, then for similar figures, linear dimensions scale by k, areas by k², and volumes by k³.

Proportional Relationships: Mathematical relationships where ratios of corresponding measurements remain constant between similar figures.

Corresponding Parts: Parts of similar figures that occupy the same relative position and have the same geometric relationship to other parts.

Complete similarity problem-solving methodology:
  1. Identify similarity: Determine if figures are similar by checking angles and side ratios
  2. Find scale factor: Calculate the ratio of corresponding linear dimensions
  3. Apply scaling relationships: Use k for linear, k² for area, k³ for volume
  4. Calculate unknowns: Use proportions to find missing measurements
  5. Verify solution: Check that all relationships are consistent
Tip 1: Always identify corresponding parts correctly before setting up proportions.
Tip 2: Remember that area scales as the square of linear dimensions.
Tip 3: Perimeter scales linearly, just like lengths.
Tip 4: All circles are similar, all squares are similar.
Tip 5: Check that your scale factor makes sense (enlargement vs. reduction).
Common Mistakes: Mixing up area and linear scaling, misidentifying corresponding parts, forgetting to square the scale factor for areas.
Memorization Aid: "Linear by k, Area by k², Volume by k³" - remember this sequence!
Complete similarity relationships:
Measurement Type Scaling Factor Example
Length, Width, Height k Side lengths
Perimeter k Total boundary length
Area k² Surface coverage
Volume k³ Space occupied
Angles 1 Remain unchanged
Similarity Scaling Relationships
Exercise 6: Scale Factor Effects
How different measurements change with scale factor:
• Linear: changes by factor k
• Area: changes by factor k²
• Volume: changes by factor k³

Analysis: The chart shows how different measurements scale with the scale factor.

  • Linear: Changes proportionally (y = k)
  • Area: Changes quadratically (y = k²)
  • Volume: Changes cubically (y = k³)

Questions & Answers

Question: I'm confused about when to use k versus k² versus k³. How do I know which one to use?

Answer: The key is to think about the dimension of the measurement:

  • Linear (1D): Use k for lengths, widths, heights, perimeters, radii, diameters
  • Area (2D): Use k² for areas, surface areas (because area = length × width)
  • Volume (3D): Use k³ for volumes (because volume = length × width × height)

A helpful way to remember: count the dimensions! A line is 1-dimensional (k¹ = k), an area is 2-dimensional (k²), and a volume is 3-dimensional (k³).

Question: How do I identify corresponding parts in similar figures?

Answer: Here are methods to identify corresponding parts:

1. Vertex Order: If triangles ABC and DEF are similar as △ABC ~ △DEF, then A corresponds to D, B to E, and C to F.

2. Angle Equality: Corresponding angles are equal. The largest angle in one figure corresponds to the largest in the other.

3. Side Proportionality: Longest sides correspond to each other, shortest to shortest, etc.

4. Relative Position: Parts in the same relative position correspond (top left corner, bottom edge, etc.).

Always arrange the vertices in the same order when naming similar figures to maintain correspondence.

Question: Why does area scale by k² rather than just k?

Answer: Area is a two-dimensional measurement, so it scales in two directions:

Think of area as length × width. If both length and width scale by factor k:

New Area = (k × old length) × (k × old width) = k² × (old length × old width) = k² × old area

For example, if a square with side length 2 (area = 4) is scaled by factor 3, the new square has side length 6 (area = 36). Notice that 36 = 4 × 3², confirming the k² relationship.

This principle extends to any 2D shape, not just squares!

Question: How does similarity apply to maps and scale drawings?

Answer: Maps and scale drawings are perfect examples of similarity in action:

Linear Scale: The scale (like 1:50,000) tells you how linear dimensions relate. 1 cm on the map equals 50,000 cm in reality.

Area Scale: Areas scale by the square of the linear scale factor. A 1 cm² area on the map represents (50,000)² cm² = 2.5 km² in reality.

Applications: This allows us to measure distances and areas on maps and convert them to real-world measurements. Architects, engineers, and navigators use these principles daily.

The key is recognizing that the map and the real world are similar figures with a known scale factor!

Question: What's the best approach to solve similarity problems?

Answer: Follow this systematic approach:

  1. Identify: Confirm the figures are similar and identify corresponding parts
  2. Find k: Calculate the scale factor using known corresponding measurements
  3. Classify: Determine if you need linear, area, or volume scaling
  4. Apply: Use the appropriate scaling factor (k, k², or k³)
  5. Verify: Check that your answer makes sense dimensionally

Always double-check that corresponding parts are properly matched before setting up proportions. Draw diagrams to visualize the relationship between the figures.