Solved Exercises on Properties of Similarity in Grade 8

Master the properties of similarity: reflexive, symmetric, transitive properties, scale factors, and their applications through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Reflexive Property
Exercise 1
Demonstrate the reflexive property of similarity by showing that triangle ABC with vertices A(2, 3), B(5, 3), C(3, 7) is similar to itself. Verify that all corresponding angles are equal and that the ratio of corresponding sides is 1:1.
Definition:

Reflexive property of similarity: Any geometric figure is similar to itself. For any figure F, F ~ F. This means all corresponding angles are equal and the ratio of corresponding sides is 1:1 (scale factor = 1).

Verification method:
  1. Identify the figure being compared to itself
  2. Calculate the lengths of all sides using distance formula
  3. Calculate all angles using geometric properties
  4. Confirm that ratios of corresponding sides are 1:1
  5. Verify that all corresponding angles are equal
Original Triangle
△ABC
Same Triangle
△ABC
Conclusion
△ABC ~ △ABC
Step 1: Calculate Side Lengths of △ABC

AB = √[(5-2)² + (3-3)²] = √[9+0] = 3

BC = √[(3-5)² + (7-3)²] = √[4+16] = √20 = 2√5

AC = √[(3-2)² + (7-3)²] = √[1+16] = √17

Step 2: Calculate Ratios of Corresponding Sides

When comparing △ABC to itself:

AB/AB = 3/3 = 1

BC/BC = 2√5/2√5 = 1

AC/AC = √17/√17 = 1

Step 3: Verify Angles

When comparing △ABC to itself:

∠A = ∠A, ∠B = ∠B, ∠C = ∠C

All corresponding angles are equal

△ABC ~ △ABC (scale factor = 1)
Final answer:

By the reflexive property of similarity, △ABC ~ △ABC since all corresponding angles are equal and the ratio of corresponding sides is 1:1.

Applied rules:

• Reflexive property: Any figure is similar to itself

• Distance formula: Used to calculate side lengths

• Similarity definition: Equal angles and proportional sides

2 Symmetric Property
Exercise 2
Given that triangle PQR with vertices P(1, 2), Q(4, 2), R(2.5, 5) is similar to triangle XYZ with vertices X(2, 4), Y(8, 4), Z(5, 10) with a scale factor of 2:1, demonstrate the symmetric property of similarity by showing that triangle XYZ is also similar to triangle PQR with the reciprocal scale factor.
Definition:

Symmetric property of similarity: If figure A is similar to figure B, then figure B is similar to figure A. If A ~ B, then B ~ A. The scale factor becomes the reciprocal when the relationship is reversed.

Given
△PQR ~ △XYZ (scale factor 2:1)
To Prove
△XYZ ~ △PQR (scale factor 1:2)
Conclusion
Symmetric Property
Step 1: Verify Given Similarity (△PQR ~ △XYZ)

Side lengths of △PQR:

PQ = 3, QR = √[(2.5-4)² + (5-2)²] = √[2.25+9] = √11.25

PR = √[(2.5-1)² + (5-2)²] = √[2.25+9] = √11.25

Step 2: Calculate Side Lengths of △XYZ

XY = 6, YZ = √[(5-8)² + (10-4)²] = √[9+36] = √45

XZ = √[(5-2)² + (10-4)²] = √[9+36] = √45

Step 3: Verify Symmetric Property (△XYZ ~ △PQR)

Ratio of corresponding sides:

XY/PQ = 6/3 = 2

YZ/QR = √45/√11.25 = √(45/11.25) = √4 = 2

XZ/PR = √45/√11.25 = 2

Scale factor from △XYZ to △PQR is 1:2

△XYZ ~ △PQR (scale factor 1:2)
Final answer:

By the symmetric property of similarity, if △PQR ~ △XYZ with scale factor 2:1, then △XYZ ~ △PQR with scale factor 1:2.

Applied rules:

• Symmetric property: Similarity relationship is reversible

• Reciprocal scale factor: When reversing similarity, scale factor becomes reciprocal

• Angle preservation: Similar figures have equal corresponding angles

3 Transitive Property
Exercise 3
Given that triangle ABC ~ triangle DEF with scale factor 3:2, and triangle DEF ~ triangle GHI with scale factor 4:3, prove that triangle ABC ~ triangle GHI and find the scale factor. Use coordinate geometry with A(0, 0), B(6, 0), C(0, 8), D(0, 0), E(4, 0), F(0, 5.33).
Definition:

Transitive property of similarity: If figure A is similar to figure B, and figure B is similar to figure C, then figure A is similar to figure C. If A ~ B and B ~ C, then A ~ C. The scale factor is the product of the individual scale factors.

Given 1
△ABC ~ △DEF (scale factor 3:2)
Given 2
△DEF ~ △GHI (scale factor 4:3)
To Prove
△ABC ~ △GHI (scale factor ?)
Step 1: Verify Given Similarities

△ABC: AB = 6, BC = 10, AC = 8 (3-4-5 triangle scaled by 2)

△DEF: DE = 4, EF = 6.67, DF = 5.33 (approximately 3-4-5 triangle)

Ratio AB/DE = 6/4 = 3/2 ✓

Step 2: Apply Transitive Property

If △ABC ~ △DEF with scale factor 3:2

And △DEF ~ △GHI with scale factor 4:3

Then △ABC ~ △GHI with scale factor (3/2) × (4/3) = 12/6 = 2

Step 3: Verify the Result

Total scale factor from △ABC to △GHI is 2:1

This means each side of △ABC is twice the corresponding side of △GHI

Step 4: Confirm Properties

All corresponding angles in △ABC, △DEF, and △GHI are equal

Sides are proportional according to the calculated scale factors

△ABC ~ △GHI (scale factor 2:1)
Final answer:

By the transitive property of similarity, since △ABC ~ △DEF and △DEF ~ △GHI, then △ABC ~ △GHI with a scale factor of 2:1.

Applied rules:

• Transitive property: Similarity relationships can be chained

• Scale factor multiplication: Combined scale factor = product of individual scale factors

• Angle preservation: All similar figures have equal corresponding angles

Rules and methods, laws,...
A ~ A
Reflexive Property
Property 1
Reflexive: A ~ A
Figure ~ itself
Property 2
Symmetric: A ~ B ⇒ B ~ A
Reverse relationship
Property 3
Transitive: A ~ B ∧ B ~ C ⇒ A ~ C
Chain relationship
Key definitions:

Similarity: Two geometric figures are similar if they have the same shape but not necessarily the same size. All corresponding angles are equal and corresponding sides are proportional.

Scale factor: The ratio of lengths of corresponding sides in similar figures.

Reflexive property: Every figure is similar to itself (A ~ A).

Symmetric property: If one figure is similar to another, the reverse is also true (A ~ B ⇒ B ~ A).

Transitive property: Similarity relationships can be chained together (A ~ B ∧ B ~ C ⇒ A ~ C).

Complete methodology:
  1. Identify the property: Determine which property of similarity applies
  2. Set up the relationship: Write the given similarity statements
  3. Apply the property: Use the appropriate property to derive new relationships
  4. Calculate scale factors: When applicable, determine the ratio of corresponding sides
  5. Verify results: Check that the derived relationships make sense
Tip 1: Similarity means same shape but not necessarily same size - angles are equal, sides are proportional.
Tip 2: The symmetric property reverses the scale factor (k becomes 1/k).
Tip 3: The transitive property multiplies scale factors (k₁ × k₂).
Tip 4: These properties are fundamental for geometric proofs involving similar figures.

Applications: Map scaling, architectural drawings, geometric proofs, trigonometry.
Proof Techniques: Essential for establishing proportional relationships in geometry.

Properties of Similarity:

• Reflexive: A ~ A (Every figure is similar to itself)

• Symmetric: If A ~ B, then B ~ A (Similarity relationship is reversible)

• Transitive: If A ~ B and B ~ C, then A ~ C (Similarity is transitive)

• Scale factors: When A ~ B with factor k, then B ~ A with factor 1/k

• Combined scale factors: If A ~ B (factor k₁) and B ~ C (factor k₂), then A ~ C (factor k₁×k₂)

Solution: Exercises 4 to 5
4 Combined Properties with Scale Factors
Exercise 4
Given that rectangle ABCD ~ rectangle EFGH with scale factor 3:1, and rectangle EFGH ~ rectangle IJKL with scale factor 2:3, use the properties of similarity to find the relationship between rectangle ABCD and rectangle IJKL. Also determine the relationship between rectangle EFGH and rectangle ABCD using the symmetric property.
Definition:

Combined properties with scale factors: Using multiple properties of similarity simultaneously while tracking scale factor relationships.

Given
ABCD ~ EFGH (scale factor 3:1)
Also Given
EFGH ~ IJKL (scale factor 2:3)
Results
ABCD ~ IJKL (scale factor 2:1)
Step 1: Apply Transitive Property

Given: ABCD ~ EFGH with scale factor 3:1

Given: EFGH ~ IJKL with scale factor 2:3

Combined scale factor: (3/1) × (2/3) = 6/3 = 2

Therefore: ABCD ~ IJKL with scale factor 2:1

Step 2: Apply Symmetric Property

From ABCD ~ EFGH with scale factor 3:1

By symmetric property: EFGH ~ ABCD with scale factor 1:3

Step 3: Verify Scale Factor Relationships

Original: ABCD to EFGH = 3:1

Reverse: EFGH to ABCD = 1:3 (reciprocal ✓)

Chain: ABCD to IJKL = 2:1

ABCD ~ IJKL (scale factor 2:1); EFGH ~ ABCD (scale factor 1:3)
Final answer:

ABCD ~ IJKL with scale factor 2:1 by the transitive property. EFGH ~ ABCD with scale factor 1:3 by the symmetric property.

Applied rules:

• Transitive property: Chains similarity relationships

• Scale factor multiplication: 3/1 × 2/3 = 2/1

• Symmetric property: Reverses similarity with reciprocal scale factor

5 Formal Proof with Similarity Properties
Exercise 5
Construct a formal proof using the properties of similarity to show that if circle P with radius 4 is similar to circle Q with radius 6, and circle Q is similar to circle R with radius 9, then circle P is similar to circle R. Include all relevant properties and scale factors used in each step.
Definition:

Circle similarity: All circles are similar to each other. The scale factor is the ratio of their radii.

Given
Circle P (r=4) ~ Circle Q (r=6)
Also Given
Circle Q (r=6) ~ Circle R (r=9)
To Prove
Circle P (r=4) ~ Circle R (r=9)
Step 1: State Given Information

Given: Circle P with radius 4 ~ Circle Q with radius 6

Scale factor: P to Q = 6/4 = 3/2

Given: Circle Q with radius 6 ~ Circle R with radius 9

Scale factor: Q to R = 9/6 = 3/2

Step 2: Apply Transitive Property

If Circle P ~ Circle Q and Circle Q ~ Circle R, then by the transitive property of similarity, Circle P ~ Circle R

Combined scale factor: (3/2) × (3/2) = 9/4

Step 3: Verify Direct Relationship

Direct scale factor from P to R: 9/4 = 2.25

Check: Radius of R / Radius of P = 9/4 = 2.25 ✓

Step 4: Conclusion

Therefore, Circle P ~ Circle R with scale factor 9:4

This completes the proof using the transitive property of similarity

Circle P ~ Circle R (scale factor 9:4)
Final answer:

Proof completed: Since Circle P ~ Circle Q and Circle Q ~ Circle R, by the transitive property of similarity, Circle P ~ Circle R with scale factor 9:4.

Applied rules:

• Transitive property: Primary property used in the proof

• Circle similarity: All circles are similar with scale factor = ratio of radii

• Scale factor multiplication: Combined scale factor = product of individual scale factors

Key Concepts: Properties of Similarity, Scale Factors, and Proportional Relationships
A ~ B ∧ B ~ C ⇒ A ~ C
Transitive Property
Key definitions:

Similarity: Two geometric figures are similar if they have the same shape but not necessarily the same size. All corresponding angles are equal and corresponding sides are proportional.

Scale factor: The constant ratio between corresponding lengths in similar figures. If k is the scale factor from figure A to figure B, then every length in B is k times the corresponding length in A.

Reflexive property: Any geometric figure is similar to itself (A ~ A) with scale factor 1.

Symmetric property: If one figure is similar to another, then the second is similar to the first (A ~ B ⇒ B ~ A). The scale factor becomes the reciprocal.

Transitive property: If one figure is similar to a second, and the second is similar to a third, then the first is similar to the third (A ~ B ∧ B ~ C ⇒ A ~ C). The scale factor is the product of the individual scale factors.

Complete methodology:
  1. Identify the property needed: Determine which property of similarity applies to the situation
  2. State the given information: Clearly write what is known including scale factors
  3. Apply the appropriate property: Use the relevant property to establish new relationships
  4. Calculate scale factors: When chaining similarities, multiply scale factors
  5. Draw logical conclusions: Use the property to prove the desired result
  6. Verify the result: Check that the scale factors and relationships make sense
Tip 1: Similarity means same shape, proportional size - angles equal, sides proportional.
Tip 2: The reflexive property is always true for similarity with scale factor 1.
Tip 3: The transitive property multiplies scale factors (not adds them).
Tip 4: These properties are fundamental for geometric proofs involving proportional relationships.

Applications: Map scaling, architectural blueprints, geometric constructions, trigonometry.
Proof Techniques: Essential for establishing proportional relationships in geometric arguments.

Properties of Similarity:

• Reflexive: A ~ A (Every figure is similar to itself, scale factor = 1)

• Symmetric: If A ~ B with scale factor k, then B ~ A with scale factor 1/k

• Transitive: If A ~ B with scale factor k₁ and B ~ C with scale factor k₂, then A ~ C with scale factor k₁×k₂

Exercise with Visualization: Similarity Relationships
Exercise 6: Property Applications
Visualize how the three properties of similarity work together:
Reflexive: A ~ A (loop with scale factor 1)
Symmetric: A ~ B ↔ B ~ A (bidirectional arrow with reciprocal scale factors)
Transitive: A ~ B, B ~ C → A ~ C (chain with multiplied scale factors)

Analysis: The chart illustrates how the three properties of similarity create a network of proportional relationships between geometric figures.

  • Reflexive: Each figure relates to itself with scale factor 1
  • Symmetric: Relationships work in both directions with reciprocal scale factors
  • Transitive: Relationships can be chained with multiplied scale factors

Questions & Answers

Question: How is similarity different from congruence? Both seem to involve the same shape.

Answer: While both similarity and congruence involve the same shape, there's a crucial difference:

Congruence:

  • Same shape AND same size
  • Corresponding sides are equal (scale factor = 1)
  • Corresponding angles are equal
  • Denoted by ≅

Similarity:

  • Same shape BUT different sizes
  • Corresponding sides are proportional (scale factor ≠ 1)
  • Corresponding angles are equal
  • Denoted by ~

All congruent figures are similar (with scale factor 1), but not all similar figures are congruent.

Question: Why does the symmetric property reverse the scale factor?

Answer: The symmetric property reverses the scale factor because it reverses the direction of comparison:

Example:

  • If Figure A ~ Figure B with scale factor 3:1, then every length in B is 3 times the corresponding length in A
  • When we reverse to B ~ A, then every length in A is 1/3 the corresponding length in B
  • So the scale factor becomes 1:3 (the reciprocal of 3:1)

Mathematical reasoning:

If A/B = k, then B/A = 1/k. This is the fundamental property of reciprocals.

For instance, if a small triangle has sides of length 2, 3, 4 and a large similar triangle has sides 6, 9, 12, the scale factor from small to large is 3:1, but from large to small it's 1:3.

Question: Do these properties apply to all geometric shapes?

Answer: Yes, the properties of similarity apply to all geometric figures:

Two-dimensional figures:

  • Triangles, rectangles, squares, polygons
  • Circles (all circles are similar to each other)
  • Ellipses, other curved shapes

Three-dimensional figures:

  • Cubes, rectangular prisms, pyramids
  • Spheres (all spheres are similar to each other)
  • Cylinders, cones

General principle:

  • Reflexive: Any figure is similar to itself
  • Symmetric: If A ~ B, then B ~ A
  • Transitive: If A ~ B and B ~ C, then A ~ C

These properties are fundamental logical relationships that apply to the concept of similarity regardless of the dimension or complexity of the figures.

Question: How do these properties help in solving real-world problems?

Answer: The properties of similarity are essential in many real-world applications:

Map scaling:

  • Using transitive property to relate distances at different scales
  • Converting between different map scales

Architecture and engineering:

  • Creating scale models using known relationships
  • Applying symmetric property to understand bidirectional relationships

Photography and optics:

  • Understanding how images scale with different focal lengths
  • Calculating magnification using scale factors

Manufacturing:

  • Creating templates and patterns of different sizes
  • Ensuring proportional relationships in scaled production

These properties provide the logical framework for understanding and calculating proportional relationships in practical situations.

Question: How can I remember the scale factor relationships for these properties?

Answer: Use these memory aids for scale factor relationships:

Reflexive Property:

  • Scale factor is always 1:1 (figure to itself)
  • Remember: "Reflexive = Reflecting to myself, so no change"

Symmetric Property:

  • Take the reciprocal of the original scale factor
  • If A ~ B has scale factor k, then B ~ A has scale factor 1/k
  • Memory: "Symmetric = Switch the fraction upside down"

Transitive Property:

  • Multiply the scale factors together
  • If A ~ B (scale factor k₁) and B ~ C (scale factor k₂), then A ~ C (scale factor k₁×k₂)
  • Memory: "Transitive = Transfer through the middle, so multiply"

Example: If A ~ B with factor 2 and B ~ C with factor 3, then A ~ C with factor 2×3=6.