Solved Exercises on Dilations and Scale Factors

Master geometric transformations: dilations, scale factors, and similarity properties through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Enlargement
Exercise 1
Triangle ABC has vertices A(2, 3), B(4, 1), and C(1, 5).
Find the coordinates of triangle A'B'C' after a dilation centered at the origin with scale factor k = 3.
Definitions:

Dilation: A transformation that enlarges or reduces a figure by a scale factor from a center point

Scale Factor (k): The ratio of the image size to the original size

Center of Dilation: The fixed point from which the dilation occurs

Rule: (x, y) → (kx, ky) when center is at origin

Dilation Method:
  1. Identify the center of dilation and scale factor
  2. Apply the dilation rule: (x, y) → (kx, ky) for origin center
  3. Multiply each coordinate by the scale factor
  4. Verify the transformation preserves shape but changes size
Original
A(2,3), B(4,1), C(1,5)
Scale Factor
k = 3
Dilated
A'(6,9), B'(12,3), C'(3,15)
Step 1: Identify the dilation parameters

Center of dilation: Origin (0, 0)

Scale factor: k = 3

Rule: (x, y) → (3x, 3y)

Step 2: Apply dilation to point A(2, 3)

A' = (3×2, 3×3) = (6, 9)

Step 3: Apply dilation to point B(4, 1)

B' = (3×4, 3×1) = (12, 3)

Step 4: Apply dilation to point C(1, 5)

C' = (3×1, 3×5) = (3, 15)

Step 5: Verify properties of dilation

Since k = 3 > 1, this is an enlargement

Triangle A'B'C' is similar to triangle ABC

All side lengths are multiplied by 3

A'(6, 9), B'(12, 3), C'(3, 15)
Final answer:

After dilation with center at origin and scale factor k = 3, the vertices of triangle A'B'C' are A'(6, 9), B'(12, 3), and C'(3, 15).

Applied rules:

• Dilation Rule: (x, y) → (kx, ky) for center at origin

• Similarity: Dilation preserves angles but changes side lengths proportionally

• Scale Factor: k > 1 is enlargement, 0 < k < 1 is reduction

2 Reduction
Exercise 2
Point P(8, 6) is dilated with center at the origin and scale factor k = 1/2.
Find the coordinates of the image point P'.
Definitions:

Reduction: A dilation with scale factor 0 < k < 1

Enlargement: A dilation with scale factor k > 1

Scale Factor: The ratio of corresponding lengths in the image to the pre-image

Original
P(8, 6)
Scale Factor
k = 1/2
Dilated
P'(4, 3)
Step 1: Identify the dilation parameters

Center of dilation: Origin (0, 0)

Scale factor: k = 1/2

Since 0 < k < 1, this is a reduction

Step 2: Apply the dilation rule

Rule: (x, y) → (kx, ky)

P' = (1/2 × 8, 1/2 × 6) = (4, 3)

Step 3: Verify the reduction

Distance from origin to P: √(8² + 6²) = √100 = 10

Distance from origin to P': √(4² + 3²) = √25 = 5

Ratio: 5/10 = 1/2 ✓

Step 4: Confirm the scale factor

The image is 1/2 the size of the original

P'(4, 3)
Final answer:

After dilation with center at origin and scale factor k = 1/2, the image point is P'(4, 3).

Applied rules:

• Dilation Rule: (x, y) → (kx, ky)

• Reduction: Scale factor 0 < k < 1 shrinks the figure

• Distance Ratio: Image distance/original distance = scale factor

3 Dilation from Different Center
Exercise 3
Triangle DEF has vertices D(3, 2), E(5, 4), and F(2, 6).
Find the coordinates of triangle D'E'F' after a dilation with center C(1, 1) and scale factor k = 2.
Definitions:

Dilation from Center (h, k): (x, y) → (h + k(x-h), k + k(y-k))

Translation Method: Translate center to origin, dilate, then translate back

Original
D(3,2), E(5,4), F(2,6)
Center & Scale
C(1,1), k=2
Dilated
D'(5,3), E'(9,7), F'(3,11)
Step 1: Identify the dilation parameters

Center of dilation: C(1, 1)

Scale factor: k = 2

Rule: (x, y) → (h + k(x-h), k + k(y-k)) where (h,k) is center

Step 2: Apply dilation to point D(3, 2)

D' = (1 + 2(3-1), 1 + 2(2-1)) = (1 + 2×2, 1 + 2×1) = (5, 3)

Step 3: Apply dilation to point E(5, 4)

E' = (1 + 2(5-1), 1 + 2(4-1)) = (1 + 2×4, 1 + 2×3) = (9, 7)

Step 4: Apply dilation to point F(2, 6)

F' = (1 + 2(2-1), 1 + 2(6-1)) = (1 + 2×1, 1 + 2×5) = (3, 11)

Step 5: Verify properties of dilation

Since k = 2 > 1, this is an enlargement

Triangle D'E'F' is similar to triangle DEF

All distances from center C are doubled

D'(5, 3), E'(9, 7), F'(3, 11)
Final answer:

After dilation with center C(1, 1) and scale factor k = 2, the vertices of triangle D'E'F' are D'(5, 3), E'(9, 7), and F'(3, 11).

Applied rules:

• Dilation Rule: (x, y) → (h + k(x-h), k + k(y-k))

• Center Point: Distances from center are scaled by factor k

• Similarity: Dilation preserves shape but changes size

Dilation Rules and Properties
\((x, y) \rightarrow (kx, ky)\)
Dilation from Origin
From Origin
(x, y) → (kx, ky)
Center at (0,0)
From Center (h,k)
(x, y) → (h+k(x-h), k+k(y-k))
General center
Scale Factor
k > 1: Enlargement
0 < k < 1: Reduction
Key definitions:

Dilation: A similarity transformation that changes the size of a figure while preserving its shape

Scale Factor: The constant of proportionality in a dilation

Similar Figures: Figures with the same shape but possibly different sizes

Center of Dilation: The fixed point from which the dilation occurs

Dilation Application Method:
  1. Identify center and scale factor: Determine the center point and value of k
  2. Apply the rule: Use the appropriate dilation formula
  3. Calculate new coordinates: Transform each vertex using the rule
  4. Verify properties: Check that shape is preserved and sizes change proportionally
  5. Connect to similarity: Understand how dilation creates similar figures
Tip 1: When k > 1, the figure gets larger (enlargement); when 0 < k < 1, it gets smaller (reduction).
Tip 2: If k is negative, the figure is dilated and reflected across the center.
Tip 3: All angles remain the same after dilation.
Tip 4: Side lengths change by the scale factor, but ratios of lengths remain constant.
Common errors: Forgetting to apply the center adjustment for non-origin centers, misapplying scale factor to all coordinates.
Exam preparation: Memorize dilation rules, practice with different centers and scale factors, understand similarity properties.
Essential Dilation Rules:

• Dilation from Origin: (x, y) → (kx, ky)

• Dilation from Center (h, k): (x, y) → (h + k(x-h), k + k(y-k))

• Scale Factor k > 1: Enlargement

• Scale Factor 0 < k < 1: Reduction

• Scale Factor k = 1: Identity transformation

Solution: Exercises 4 to 5
4 Finding Scale Factor
Exercise 4
Triangle ABC with vertices A(2, 1), B(4, 3), C(1, 4) is dilated to triangle A'B'C' with vertices A'(6, 3), B'(12, 9), C'(3, 12).
Find the center of dilation and the scale factor.
Definition:

Scale Factor: The ratio of corresponding lengths in the image to the pre-image

Center of Dilation: The point from which all distances are scaled

Scale Factor
k = 3
Center
(0, 0)
Verification
3×original = image
Step 1: Find the scale factor

Compare corresponding coordinates:

A(2, 1) → A'(6, 3): 6/2 = 3, 3/1 = 3

B(4, 3) → B'(12, 9): 12/4 = 3, 9/3 = 3

C(1, 4) → C'(3, 12): 3/1 = 3, 12/4 = 3

Scale factor k = 3

Step 2: Find the center of dilation

For dilation with center (h, k): (x, y) → (h + k(x-h), k + k(y-k))

Using point A: (2, 1) → (6, 3)

6 = h + 3(2-h) = h + 6 - 3h = 6 - 2h

2h = 0, so h = 0

3 = k + 3(1-k) = k + 3 - 3k = 3 - 2k

2k = 0, so k = 0

Step 3: Verify with center at origin

If center is (0, 0), then (x, y) → (3x, 3y)

A(2, 1) → (6, 3) ✓

B(4, 3) → (12, 9) ✓

C(1, 4) → (3, 12) ✓

Step 4: Confirm the transformation

Center of dilation: (0, 0)

Scale factor: k = 3

Center: (0, 0), Scale Factor: k = 3
Final answer:

The center of dilation is (0, 0) and the scale factor is k = 3.

Applied rules:

• Scale Factor: Ratio of corresponding coordinates

• Center Identification: Solve system of equations from dilation formula

• Verification: Check all points satisfy the transformation

5 Real-World Application
Exercise 5
A blueprint of a house has a rectangular room measuring 3 inches by 4 inches. The scale of the blueprint is 1 inch = 10 feet.
a) Find the actual dimensions of the room.
b) If the blueprint is enlarged by a scale factor of 2, what will be the new dimensions of the room on the enlarged blueprint?
Definition:

Scale Factor: The ratio of drawing size to actual size

Blueprint Scale: A ratio comparing drawing measurements to real-world measurements

Original Scale
1 in = 10 ft
Actual Dimensions
30 ft × 40 ft
After Enlargement
6 in × 8 in
Step 1: Find actual dimensions from blueprint

Blueprint dimensions: 3 inches × 4 inches

Scale: 1 inch = 10 feet

Actual length: 3 × 10 = 30 feet

Actual width: 4 × 10 = 40 feet

Step 2: Apply enlargement to blueprint

Scale factor: k = 2

New length on blueprint: 3 × 2 = 6 inches

New width on blueprint: 4 × 2 = 8 inches

Step 3: Find new scale of enlarged blueprint

Original scale: 1 inch = 10 feet

After doubling the blueprint size: 2 inches = 10 feet

New scale: 1 inch = 5 feet

Step 4: Verify the relationship

Enlarged blueprint dimensions: 6 in × 8 in

Using new scale (1 in = 5 ft): 6×5 = 30 ft, 8×5 = 40 ft

Actual room dimensions remain 30 ft × 40 ft ✓

a) Actual: 30 ft × 40 ft
b) Enlarged blueprint: 6 in × 8 in
Final answer:

a) The actual dimensions of the room are 30 feet by 40 feet.

b) After enlarging the blueprint by a scale factor of 2, the room will measure 6 inches by 8 inches on the enlarged blueprint.

Applied rules:

• Scale Factor: Multiplies the dimensions by the same factor

• Proportional Reasoning: Maintain the same ratio between drawing and reality

• Dimensional Analysis: Keep track of units during calculations

Complete Dilations and Scale Factors Guide
\((x, y) \rightarrow (kx, ky)\)
Dilation from Origin
Key definitions:

Dilation: A transformation that produces an image that is the same shape as the original but a different size

Scale Factor: The ratio of the lengths of corresponding sides of the image and the pre-image

Similar Figures: Figures that have the same shape but not necessarily the same size

Center of Dilation: A fixed point from which all points are expanded or contracted

Complete Dilation Method:
  1. Identify parameters: Determine the center of dilation and scale factor
  2. Apply the rule: Use the appropriate dilation formula based on center location
  3. Calculate coordinates: Transform each point of the pre-image
  4. Verify properties: Check that angles are preserved and sides are proportional
  5. Connect to similarity: Understand the relationship between dilation and similar figures
Tip 1: Always identify the center of dilation first before applying the transformation.
Tip 2: Draw the original and dilated figures to visualize the transformation.
Tip 3: Remember that dilations preserve angle measures but change side lengths.
Tip 4: Check that the ratio of corresponding sides equals the scale factor.
Common errors: Misidentifying the center of dilation, applying scale factor incorrectly, confusing enlargement with reduction.
Exam preparation: Practice with different centers and scale factors, understand similarity relationships, work with real-world applications.
Essential Rules:

• Dilation from Origin: (x, y) → (kx, ky)

• Dilation from Center (h, k): (x, y) → (h + k(x-h), k + k(y-k))

• Scale Factor k > 1: Enlargement

• Scale Factor 0 < k < 1: Reduction

• Scale Factor k = 1: Identity transformation

• Similarity: Dilated figures are similar to the original

Dilation Effects and Scale Factors
Relationship Between Scale Factor and Size Change
How scale factors affect geometric properties:
Area, perimeter, and distance relationships
Example: Effect of different scale factors

Analysis: The chart shows how different scale factors affect geometric measurements.

  • Linear dimensions scale by the scale factor k
  • Areas scale by k²
  • Volumes scale by k³

Questions & Answers

Question: How do I find the center of dilation if it's not at the origin?

Answer: To find the center of dilation when it's not at the origin:

  • Method 1: Use the dilation formula: (x, y) → (h + k(x-h), k + k(y-k)) where (h, k) is the center
  • Method 2: Draw lines connecting corresponding vertices of the pre-image and image; they will intersect at the center
  • Method 3: Set up equations using the fact that the center remains fixed: if (a, b) is the center, then (a, b) → (a, b)

Example: If A(2, 1) → A'(6, 3) with scale factor k = 2:

Using (x, y) → (h + k(x-h), k + k(y-k)):

6 = h + 2(2-h) = h + 4 - 2h = 4 - h, so h = -2

3 = k + 2(1-k) = k + 2 - 2k = 2 - k, so k = -1

Wait, let me recalculate: 6 = h + 2(2-h) → 6 = h + 4 - 2h → 6 = 4 - h → h = -2

Actually, let's use: 6 = h + 2(2-h) → 6 = h + 4 - 2h → 6 = 4 - h → h = -2

3 = k + 2(1-k) → 3 = k + 2 - 2k → 3 = 2 - k → k = -1

Let me recalculate more carefully: 6 = h + 2(2-h) → 6 = h + 4 - 2h → 6 = 4 - h → h = -2

3 = k + 2(1-k) → 3 = k + 2 - 2k → 3 = 2 - k → k = -1

Actually, using the correct formula: If center is (c, d), then:

6 = c + 2(2-c) → 6 = c + 4 - 2c → 6 = 4 - c → c = -2

3 = d + 2(1-d) → 3 = d + 2 - 2d → 3 = 2 - d → d = -1

So center is (-2, -1)

Question: What happens when the scale factor is negative?

Answer: When the scale factor is negative, the dilation includes both a size change and a reflection:

  • The absolute value of the scale factor determines the size change
  • The negative sign causes the image to be reflected across the center of dilation
  • The image appears on the opposite side of the center from the pre-image

Examples:

  • k = -1: Creates a reflection across the center (180° rotation)
  • k = -2: Enlarges by factor 2 and reflects across center
  • k = -0.5: Reduces by factor 0.5 and reflects across center

The dilation still preserves shape (creates similar figures) but also creates a mirror image effect.

Question: How do dilations affect area and perimeter of figures?

Answer: Dilations affect different measurements differently:

  • Linear measurements (sides, perimeter): Scale by the factor k
  • Area: Scales by the factor k²
  • Volume: Would scale by the factor k³ (for 3D figures)

Example: If a rectangle with length 4 and width 3 is dilated by k = 2:

  • Original perimeter: 2(4+3) = 14
  • New perimeter: 2(8+6) = 28 (14 × 2)
  • Original area: 4 × 3 = 12
  • New area: 8 × 6 = 48 (12 × 4 = 12 × 2²)

This is why area changes by k² rather than k.

Question: How do I determine if two figures are related by a dilation?

Answer: To determine if two figures are related by a dilation:

  1. Check similarity: All corresponding angles must be equal
  2. Check proportional sides: All corresponding sides must be in the same ratio
  3. Find center: Lines connecting corresponding vertices should intersect at a single point
  4. Verify scale factor: The ratio of any pair of corresponding sides should be the same

Steps:

  • Measure corresponding sides and calculate ratios
  • Measure corresponding angles to confirm they're equal
  • Draw lines from corresponding vertices to find the center
  • Confirm that the same scale factor applies to all measurements

If all conditions are met, the figures are related by a dilation.

Question: Where are dilations used in real life?

Answer: Dilations have many real-world applications:

  • Architecture and Engineering: Blueprints and scale models
  • Cartography: Maps at different scales
  • Photography: Zooming and resizing images
  • Manufacturing: Creating parts in different sizes from the same template
  • Computer Graphics: Scaling objects in video games and design software
  • Medicine: Enlarging medical images for better diagnosis

Understanding dilations helps in fields requiring scaling, modeling, and proportional reasoning.