Solved Exercises on Translations, Reflections, Rotations

Master geometric transformations: translations, reflections, and rotations with coordinate methods through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Translation
Exercise 1
Triangle ABC has vertices A(2, 3), B(5, 1), and C(4, 6).
Find the coordinates of triangle A'B'C' after translating by vector (3, -2).
Definitions:

Translation: A transformation that moves every point of a figure by the same distance in the same direction

Translation Vector: A directed line segment that defines the direction and magnitude of the translation

Rule: (x, y) → (x + a, y + b) where (a, b) is the translation vector

Translation Method:
  1. Identify the translation vector (a, b)
  2. Apply the transformation rule: (x, y) → (x + a, y + b)
  3. Add the vector components to each coordinate of the original points
  4. Verify the transformation preserves distances and orientation
Original
A(2,3), B(5,1), C(4,6)
Vector
(3, -2)
Translated
A'(5,1), B'(8,-1), C'(7,4)
Step 1: Identify the translation vector

Translation vector: (3, -2)

This means move 3 units right and 2 units down

Step 2: Apply translation to point A(2, 3)

A' = (2 + 3, 3 + (-2)) = (5, 1)

Step 3: Apply translation to point B(5, 1)

B' = (5 + 3, 1 + (-2)) = (8, -1)

Step 4: Apply translation to point C(4, 6)

C' = (4 + 3, 6 + (-2)) = (7, 4)

Step 5: Verify properties of translation

Translation preserves distances, angles, and orientation

Triangle A'B'C' is congruent to triangle ABC

A'(5, 1), B'(8, -1), C'(7, 4)
Final answer:

After translation by vector (3, -2), the vertices of triangle A'B'C' are A'(5, 1), B'(8, -1), and C'(7, 4).

Applied rules:

• Translation Rule: (x, y) → (x + a, y + b)

• Isometry: Translation preserves distances and angles

• Parallelism: Lines remain parallel after translation

2 Rotation
Exercise 2
Point P(3, 4) is rotated 90° counterclockwise about the origin.
Find the coordinates of the image point P'.
Definitions:

Rotation: A transformation that turns a figure around a fixed point called the center of rotation

Center of Rotation: The fixed point around which the figure rotates

Angle of Rotation: The measure of rotation in degrees

Counterclockwise: Positive direction of rotation

Rule 90° CCW
(x, y) → (-y, x)
Apply
(3, 4) → (-4, 3)
Result
P'(-4, 3)
Step 1: Identify the rotation parameters

Center of rotation: Origin (0, 0)

Angle of rotation: 90° counterclockwise

Original point: P(3, 4)

Step 2: Apply the 90° counterclockwise rotation rule

For rotation of 90° counterclockwise about the origin: (x, y) → (-y, x)

Step 3: Apply the rule to point P(3, 4)

P' = (-4, 3)

Step 4: Verify the rotation

Distance from origin: OP = √(3² + 4²) = √25 = 5

Distance from origin: OP' = √((-4)² + 3²) = √25 = 5

Distances are preserved ✓

Step 5: Confirm the angle of rotation

Original point P(3, 4) is in the first quadrant

Rotated point P'(-4, 3) is in the second quadrant

This confirms a 90° counterclockwise rotation ✓

P'(-4, 3)
Final answer:

After rotating point P(3, 4) 90° counterclockwise about the origin, the image point is P'(-4, 3).

Applied rules:

• Rotation Rules: 90° CCW: (x, y) → (-y, x)

• Isometry: Rotation preserves distances and angles

• Orientation: Counterclockwise rotation is positive

3 Reflection
Exercise 3
Triangle DEF has vertices D(2, 5), E(4, 1), and F(6, 3).
Find the coordinates of triangle D'E'F' after reflecting across the y-axis.
Definitions:

Reflection: A transformation that flips a figure across a line called the line of reflection

Line of Reflection: The mirror line across which the figure is reflected

Rule for y-axis: (x, y) → (-x, y)

Original
D(2,5), E(4,1), F(6,3)
Reflection Rule
(x, y) → (-x, y)
Reflected
D'(-2,5), E'(-4,1), F'(-6,3)
Step 1: Identify the line of reflection

Line of reflection: y-axis (x = 0)

Rule for reflection across y-axis: (x, y) → (-x, y)

Step 2: Apply reflection to point D(2, 5)

D' = (-2, 5)

Step 3: Apply reflection to point E(4, 1)

E' = (-4, 1)

Step 4: Apply reflection to point F(6, 3)

F' = (-6, 3)

Step 5: Verify properties of reflection

Reflection preserves distances but reverses orientation

Triangle D'E'F' is congruent to triangle DEF

The y-coordinates remain unchanged, x-coordinates change sign

D'(-2, 5), E'(-4, 1), F'(-6, 3)
Final answer:

After reflecting triangle DEF across the y-axis, the vertices of triangle D'E'F' are D'(-2, 5), E'(-4, 1), and F'(-6, 3).

Applied rules:

• Reflection Rule: Across y-axis: (x, y) → (-x, y)

• Isometry: Reflection preserves distances and angles

• Orientations: Reflection reverses the orientation of the figure

Transformation Rules and Properties
\((x, y) \rightarrow (x+a, y+b)\)
Translation by vector (a, b)
Translation
(x, y) → (x+a, y+b)
Vector (a, b)
Rotation
(x, y) → (-y, x)
90° CCW about origin
Reflection
(x, y) → (-x, y)
Across y-axis
Key definitions:

Transformation: A function that maps a geometric figure onto another figure

Pre-image: The original figure before the transformation

Image: The figure after the transformation

Isometry: A transformation that preserves distances (translation, reflection, rotation)

Transformation Application Method:
  1. Identify transformation type: Determine if it's translation, reflection, or rotation
  2. Identify parameters: Translation vector, line of reflection, or center and angle of rotation
  3. Apply the rule: Use the appropriate transformation rule for each point
  4. Verify properties: Check that the transformation preserves necessary properties
  5. Connect to geometry: Understand how the transformation affects geometric properties
Tip 1: For rotations, memorize the rules for 90°, 180°, and 270° about the origin.
Tip 2: For reflections, identify which axis or line you're reflecting across.
Tip 3: All isometries preserve distances and angles.
Tip 4: Draw the original and transformed figures to visualize the transformation.
Common errors: Forgetting to apply the transformation to all points, misapplying rotation rules, confusing reflection rules.
Exam preparation: Memorize transformation rules, practice with different transformation types, understand preservation properties.
Essential Transformation Rules:

• Translation: (x, y) → (x + a, y + b)

• Rotation 90° CCW: (x, y) → (-y, x)

• Rotation 180°: (x, y) → (-x, -y)

• Rotation 270° CCW: (x, y) → (y, -x)

• Reflection across y-axis: (x, y) → (-x, y)

• Reflection across x-axis: (x, y) → (x, -y)

Solution: Exercises 4 to 5
4 Combined Transformations
Exercise 4
Point Q(2, 3) undergoes two transformations in sequence:
1) Reflect across the x-axis
2) Translate by vector (4, -1)
Find the final coordinates of point Q".
Definition:

Composition of Transformations: Applying multiple transformations in sequence

Order Matters: The result depends on the order of transformations

Original
Q(2, 3)
After Reflection
Q'(2, -3)
After Translation
Q"(6, -4)
Step 1: Apply the first transformation (reflection across x-axis)

Rule for reflection across x-axis: (x, y) → (x, -y)

Q(2, 3) → Q'(2, -3)

Step 2: Apply the second transformation (translation by vector (4, -1))

Rule for translation: (x, y) → (x + a, y + b)

Q'(2, -3) → Q"(2 + 4, -3 + (-1)) = Q"(6, -4)

Step 3: Verify the transformations

Distance from origin: OQ = √(2² + 3²) = √13

Distance from origin: OQ" = √(6² + (-4)²) = √52 = 2√13

Note: Combined transformations may not preserve distances

Step 4: Describe the overall transformation

The composition of a reflection and a translation is called a glide reflection

Q"(6, -4)
Final answer:

After reflecting point Q(2, 3) across the x-axis and then translating by vector (4, -1), the final coordinates are Q"(6, -4).

Applied rules:

• Sequential Application: Apply transformations in the specified order

• Composition: The result of combining multiple transformations

• Glide Reflection: Combination of reflection and translation

5 Real-World Application
Exercise 5
A robot arm starts at position (5, 2). It first rotates 90° clockwise about the origin, then translates 3 units right and 4 units up.
Find the final position of the robot arm.
Definition:

Real-World Transformations: Applying geometric transformations to practical scenarios

Rotation Direction: Clockwise is negative, counterclockwise is positive

Original
(5, 2)
After Rotation
(2, -5)
After Translation
(5, -1)
Step 1: Apply the rotation (90° clockwise about origin)

Rule for 90° clockwise: (x, y) → (y, -x)

Rotation is 90° clockwise, which is the same as 270° counterclockwise

(5, 2) → (2, -5)

Step 2: Apply the translation (3 units right, 4 units up)

Translation vector: (3, 4)

Rule: (x, y) → (x + 3, y + 4)

(2, -5) → (2 + 3, -5 + 4) = (5, -1)

Step 3: Verify the transformations

Original distance from origin: √(5² + 2²) = √29

After rotation: √(2² + (-5)²) = √29 (rotation preserves distance)

After translation: √(5² + (-1)²) = √26 (translation preserves distance)

Step 4: Interpret the result in context

The robot arm ends at position (5, -1) after the two transformations

Final position: (5, -1)
Final answer:

The final position of the robot arm is (5, -1) after rotating 90° clockwise about the origin and then translating by vector (3, 4).

Applied rules:

• Rotation Rules: 90° CW: (x, y) → (y, -x)

• Translation Rules: (x, y) → (x + a, y + b)

• Sequential Transformations: Apply in the specified order

Complete Transformations Reference Guide
\((x, y) \rightarrow (x', y')\)
General Transformation Rule
Key definitions:

Transformation: A mapping from a pre-image to an image that changes the position, size, or orientation of a figure

Isometry: A transformation that preserves distances and angles (rigid motion)

Similarity Transformation: A transformation that preserves shape but not necessarily size

Composition: Applying multiple transformations in sequence

Complete Transformation Method:
  1. Identify the transformation type: Determine if it's translation, reflection, rotation, or dilation
  2. Identify transformation parameters: Vector, line, center, angle, or scale factor
  3. Apply the appropriate rule: Use the specific transformation rule
  4. Verify the result: Check that properties are preserved as expected
  5. Connect to geometry: Understand the geometric implications of the transformation
Tip 1: Always draw the original and transformed figures to visualize the transformation.
Tip 2: Remember that rotations about the origin have specific rules for 90°, 180°, and 270°.
Tip 3: For compositions, apply transformations in the specified order.
Tip 4: All isometries (translations, reflections, rotations) preserve distances and angles.
Common errors: Applying transformations in wrong order, confusing clockwise/counterclockwise rotations, misremembering reflection rules.
Exam preparation: Memorize transformation rules, practice compositions, understand geometric properties preserved by each transformation.
Essential Transformation Rules:

• Translation: (x, y) → (x + a, y + b)

• Rotation 90° CCW: (x, y) → (-y, x)

• Rotation 180°: (x, y) → (-x, -y)

• Rotation 270° CCW: (x, y) → (y, -x)

• Rotation 90° CW: (x, y) → (y, -x)

• Reflection across x-axis: (x, y) → (x, -y)

• Reflection across y-axis: (x, y) → (-x, y)

• Reflection across line y=x: (x, y) → (y, x)

Types of Transformations
Transformation Categories
Types of transformations and their properties:
Isometries, Dilations, and Compositions
Example: Preserved vs non-preserved properties

Analysis: The chart shows the different types of transformations and their characteristics.

  • Isometries: Preserve distances and angles
  • Dilations: Preserve angles but scale distances
  • Compositions: Combined effects of multiple transformations

Questions & Answers

Question: How do I remember the rotation rules for 90°, 180°, and 270° about the origin?

Answer: Here are some memory aids for rotation rules about the origin:

  • 90° Counterclockwise: (x, y) → (-y, x) - "Switch and negate the first"
  • 180°: (x, y) → (-x, -y) - "Negate both coordinates"
  • 270° Counterclockwise: (x, y) → (y, -x) - "Switch and negate the second"

Alternative approach:

  • For 90° CCW: Think of a point (3, 4) moving from first to second quadrant: (3, 4) → (-4, 3)
  • For 270° CCW: Think of the same point moving from first to fourth quadrant: (3, 4) → (4, -3)

Note that 90° clockwise is the same as 270° counterclockwise, and vice versa.

Question: What's the difference between reflecting across the x-axis and y-axis?

Answer: The key difference is which coordinate changes sign:

  • Reflection across x-axis: (x, y) → (x, -y) - y-coordinate changes sign
  • Reflection across y-axis: (x, y) → (-x, y) - x-coordinate changes sign

Memory aid:

  • When reflecting across the x-axis, the x stays the same, y flips
  • When reflecting across the y-axis, the y stays the same, x flips

Example: Point (3, 4) becomes (3, -4) when reflected across x-axis, and (-3, 4) when reflected across y-axis.

Question: Does the order matter when applying multiple transformations?

Answer: Yes, the order usually matters when composing transformations. In general, transformations are not commutative.

Example: Starting with point (1, 2)

  • Translate by (1, 0) then reflect across y-axis: (1, 2) → (2, 2) → (-2, 2)
  • Reflect across y-axis then translate by (1, 0): (1, 2) → (-1, 2) → (0, 2)

The results are different! However, some special pairs of transformations do commute, such as two translations.

Always follow the order specified in the problem.

Question: What does it mean for a transformation to be an isometry?

Answer: An isometry is a transformation that preserves distances. This means:

  • Any two points maintain the same distance after the transformation
  • All side lengths of shapes remain unchanged
  • All angle measures remain unchanged
  • The transformed figure is congruent to the original figure

Isometries include:

  • Translations (slides)
  • Reflections (flips)
  • Rotations (turns)
  • Glide reflections (combination of reflection and translation)

A dilation (scaling) is not an isometry because it changes distances.

Question: Where are transformations used in real life?

Answer: Transformations have many real-world applications:

  • Computer Graphics: Moving, rotating, and scaling objects in video games and design software
  • Robotics: Programming movement and positioning of robotic arms
  • Architecture: Creating symmetrical designs and floor plans
  • Art and Design: Creating patterns, tessellations, and symmetrical artwork
  • Navigation: GPS systems use coordinate transformations
  • Engineering: CAD software relies heavily on transformations

Understanding transformations helps in fields requiring spatial reasoning and geometric problem-solving.