Solved Exercises on Dilations and Similarity Transformations in Grade 8

Master dilations and similarity transformations: scale factors, coordinate geometry, and properties preservation through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Basic Dilation
Exercise 1
Triangle ABC has vertices A(2, 1), B(4, 1), and C(3, 3). Find the coordinates of the image after a dilation centered at the origin with scale factor k = 2.
Definition:

Dilation: A transformation that changes the size of a figure while preserving its shape. Every point moves along a ray from the center of dilation.

Scale Factor (k): The ratio of distances from the center of dilation to corresponding points on the image and pre-image.

Dilation Method:
  1. Identify the center of dilation and scale factor
  2. Apply the dilation rule: (x, y) → (kx, ky) when center is at origin
  3. Calculate new coordinates for each vertex
  4. Connect the new points to form the dilated image
Pre-image
A(2,1), B(4,1), C(3,3)
Rule
(x,y)→(2x,2y)
Image
A'(4,2), B'(8,2), C'(6,6)
Step 1: Identify the dilation parameters

Center of dilation: Origin (0, 0)

Scale factor: k = 2

Original vertices: A(2, 1), B(4, 1), C(3, 3)

Step 2: Apply the dilation rule

When center is at origin: (x, y) → (kx, ky)

For k = 2: (x, y) → (2x, 2y)

Step 3: Calculate new coordinates

A(2, 1) → A'(2×2, 2×1) = A'(4, 2)

B(4, 1) → B'(2×4, 2×1) = B'(8, 2)

C(3, 3) → C'(2×3, 2×3) = C'(6, 6)

Step 4: Verify the dilation

Distances from origin have doubled:

A: √(2² + 1²) = √5 → A': √(4² + 2²) = √20 = 2√5

Scale factor: 2√5/√5 = 2 ✓

A'(4,2), B'(8,2), C'(6,6)
Final answer:

The coordinates of the dilated triangle A'B'C' are: A'(4, 2), B'(8, 2), and C'(6, 6).

Applied rules:

• Dilation Rule: (x, y) → (kx, ky) when center is at origin

• Scale Factor: k > 1 creates enlargement, 0 < k < 1 creates reduction

• Coordinate Transformation: Multiply each coordinate by scale factor

2 Reduction Dilation
Exercise 2
Rectangle PQRS has vertices P(6, 4), Q(6, -2), R(-2, -2), and S(-2, 4). Find the coordinates after a dilation centered at the origin with scale factor k = 1/2.
Reduction:

Reduction Dilation: A dilation with scale factor 0 < k < 1, making the image smaller than the original.

Properties Preserved: Shape, angle measures, and parallelism remain unchanged.

Pre-image
P(6,4), Q(6,-2), R(-2,-2), S(-2,4)
Rule
(x,y)→(½x,½y)
Image
P'(3,2), Q'(3,-1), R'(-1,-1), S'(-1,2)
Step 1: Identify the dilation parameters

Center of dilation: Origin (0, 0)

Scale factor: k = 1/2 (reduction)

Original vertices: P(6, 4), Q(6, -2), R(-2, -2), S(-2, 4)

Step 2: Apply the dilation rule

When center is at origin: (x, y) → (kx, ky)

For k = 1/2: (x, y) → (1/2x, 1/2y)

Step 3: Calculate new coordinates

P(6, 4) → P'(1/2×6, 1/2×4) = P'(3, 2)

Q(6, -2) → Q'(1/2×6, 1/2×(-2)) = Q'(3, -1)

R(-2, -2) → R'(1/2×(-2), 1/2×(-2)) = R'(-1, -1)

S(-2, 4) → S'(1/2×(-2), 1/2×4) = S'(-1, 2)

Step 4: Verify the reduction

Lengths have been halved:

Original width: 6 - (-2) = 8 → New width: 3 - (-1) = 4

Scale factor: 4/8 = 1/2 ✓

P'(3,2), Q'(3,-1), R'(-1,-1), S'(-1,2)
Final answer:

The coordinates of the dilated rectangle P'Q'R'S' are: P'(3, 2), Q'(3, -1), R'(-1, -1), and S'(-1, 2).

Applied rules:

• Reduction Dilation: Scale factor 0 < k < 1 shrinks the figure

• Coordinate Transformation: Each coordinate multiplied by scale factor

• Properties Preservation: Shape and angles remain the same

3 Dilation with Different Center
Exercise 3
Point T(5, 3) undergoes a dilation with center C(2, 1) and scale factor k = 3. Find the coordinates of the image T'.
Dilation with Arbitrary Center:

General Dilation Rule: To dilate point (x, y) with center (h, k) and scale factor r: (x', y') = (h + r(x - h), k + r(y - k)).

Translation Concept: Move center to origin, apply dilation, move back.

Given
T(5,3), C(2,1), k=3
Formula
(x',y')=(h+r(x-h), k+r(y-k))
Result
T'(11,7)
Step 1: Identify the parameters

Original point: T(5, 3)

Center of dilation: C(2, 1)

Scale factor: k = 3

Step 2: Apply the general dilation formula

For center (h, k) and scale factor r:

x' = h + r(x - h)

y' = k + r(y - k)

Step 3: Calculate the new x-coordinate

x' = h + r(x - h)

x' = 2 + 3(5 - 2)

x' = 2 + 3(3)

x' = 2 + 9 = 11

Step 4: Calculate the new y-coordinate

y' = k + r(y - k)

y' = 1 + 3(3 - 1)

y' = 1 + 3(2)

y' = 1 + 6 = 7

T'(11, 7)
Final answer:

The coordinates of the image T' are (11, 7).

Applied rules:

• General Dilation Formula: (x', y') = (h + r(x - h), k + r(y - k))

• Arbitrary Center: Points move along rays from the center

• Distance Scaling: Distance from center is multiplied by scale factor

Dilations and Similarity Rules and Properties
\((x, y) \rightarrow (kx, ky)\)
Dilation at Origin
\((x', y') = (h + r(x - h), k + r(y - k))\)
Dilation at Center (h,k)
Enlargement
k > 1
Figure gets larger
Reduction
0 < k < 1
Figure gets smaller
Similarity
Shape preserved
Angles stay the same
Properties Preserved: Angle measures, parallelism, collinearity
Properties Changed: Side lengths, area, perimeter
Area Change: Multiplied by k² where k is scale factor
Solution: Exercises 4 to 5
4 Finding Scale Factor
Exercise 4
Triangle DEF with vertices D(1, 2), E(3, 2), F(2, 5) is dilated to triangle D'E'F' with vertices D'(2, 4), E'(6, 4), F'(4, 10). Find the center of dilation and the scale factor.
Finding Dilation Parameters:

Scale Factor: The ratio of corresponding side lengths or distances from the center.

Center of Dilation: The fixed point from which all distances scale proportionally.

Pre-image
D(1,2), E(3,2), F(2,5)
Image
D'(2,4), E'(6,4), F'(4,10)
Result
k=2, Center=(0,0)
Step 1: Calculate potential scale factor

Compare corresponding coordinates: D(1, 2) → D'(2, 4)

x-coordinate: 1 → 2 (multiplied by 2)

y-coordinate: 2 → 4 (multiplied by 2)

Check E: 3 → 6 (×2), 2 → 4 (×2)

Check F: 2 → 4 (×2), 5 → 10 (×2)

Scale factor k = 2

Step 2: Determine the center of dilation

Since each coordinate is multiplied by 2, this suggests center is at origin

Verify: (x, y) → (2x, 2y) maps (0, 0) → (0, 0)

Origin remains fixed, confirming center is (0, 0)

Step 3: Verify with dilation formula

Using (x', y') = (h + r(x - h), k + r(y - k)) with center (0, 0) and r = 2:

D(1, 2) → (0 + 2(1-0), 0 + 2(2-0)) = (2, 4) ✓

E(3, 2) → (0 + 2(3-0), 0 + 2(2-0)) = (6, 4) ✓

F(2, 5) → (0 + 2(2-0), 0 + 2(5-0)) = (4, 10) ✓

Step 4: Confirm with distance ratios

Distance from origin to D: √(1² + 2²) = √5

Distance from origin to D': √(2² + 4²) = √20 = 2√5

Ratio: 2√5/√5 = 2 ✓

k = 2, Center = (0, 0)
Final answer:

The scale factor is k = 2 and the center of dilation is at the origin (0, 0).

Applied rules:

• Scale Factor Calculation: Ratio of corresponding lengths

• Center Verification: Fixed point under transformation

• Coordinate Analysis: Look for consistent multiplication factors

5 Real-World Application
Exercise 5
A rectangular picture measuring 4 inches by 6 inches is enlarged on a photocopier by 150%. What are the dimensions of the copy, and what is the scale factor?
Real-World Context:

Percentage Enlargement: 150% means the new size is 150% of the original.

Scale Factor Conversion: Percentage ÷ 100 = decimal scale factor.

Original
4×6 inches
Scale Factor
k = 1.5
New Size
6×9 inches
Step 1: Convert percentage to scale factor

150% = 150/100 = 1.5

Scale factor k = 1.5

Step 2: Calculate new dimensions

New width = Original width × Scale factor

New width = 4 × 1.5 = 6 inches

New height = Original height × Scale factor

New height = 6 × 1.5 = 9 inches

Step 3: Verify the enlargement

Original area: 4 × 6 = 24 square inches

New area: 6 × 9 = 54 square inches

Area scale factor: 54/24 = 2.25 = (1.5)² ✓

Step 4: Confirm properties

Shape remains rectangular (similarity preserved)

Angle measures remain 90°

Ratio of sides stays the same: 4:6 = 2:3 and 6:9 = 2:3

Dimensions: 6×9 inches, Scale factor: 1.5
Final answer:

The dimensions of the copy are 6 inches by 9 inches, and the scale factor is 1.5.

Applied rules:

• Percentage Conversion: Percentage ÷ 100 = decimal scale factor

• Dimension Scaling: Each dimension multiplied by scale factor

• Area Scaling: Area multiplied by square of scale factor

Dilations and Similarity Laws, Methods, Definitions
\((x, y) \rightarrow (kx, ky)\)
Dilation at Origin
\((x', y') = (h + r(x - h), k + r(y - k))\)
Dilation at Center (h,k)
Key definitions:

Dilation: A transformation that changes the size of a figure while preserving its shape and orientation.

Scale Factor (k): The constant ratio of distances from the center of dilation to corresponding points on the image and pre-image.

Center of Dilation: The fixed point from which all points move proportionally during the dilation.

Similar Figures: Figures with the same shape but possibly different sizes; corresponding angles are equal and corresponding sides are proportional.

Complete methodology:
  1. Identify Parameters: Determine center of dilation and scale factor
  2. Select Formula: Use appropriate formula based on center location
  3. Apply Transformation: Calculate new coordinates for each point
  4. Verify Results: Check that distances scale by the correct factor
  5. Analyze Properties: Confirm which properties are preserved
Tip 1: Scale factor k > 1 creates enlargement; 0 < k < 1 creates reduction.
Tip 2: When center is at origin, multiply each coordinate by scale factor.
Tip 3: Area changes by the square of the scale factor.
Tip 4: Angles and shape are always preserved in dilations.
Tip 5: Negative scale factors create reflections across the center.
Common errors: Forgetting to apply scale factor to both coordinates, confusing center of dilation, miscalculating scale factor.
Exam preparation: Practice with different centers, memorize formulas, understand property preservation.
Formulas to know by heart:

• Dilation at origin: (x, y) → (kx, ky)

• Dilation at center (h, k): (x', y') = (h + r(x - h), k + r(y - k))

• Area scaling: A' = k² × A

• Perimeter scaling: P' = k × P

Dilation Effects Visualization
Scale Factor Impact
Visualization of how different scale factors affect figure size:
• k > 1: Enlargement
• 0 < k < 1: Reduction
• k = 1: Identity (no change)
• k < 0: Reflection and scaling

Analysis: The chart shows how scale factor affects the size of geometric figures.

  • Scale factors greater than 1 create enlargements
  • Scale factors between 0 and 1 create reductions
  • Negative scale factors create reflections across the center
  • Area changes by the square of the scale factor

Questions & Answers

Question: What happens when the scale factor is negative? How is that different from positive scale factors?

Answer: Negative scale factors create a dilation combined with a reflection:

  • Magnitude: The absolute value of the scale factor determines size change
  • Reflection: The figure is reflected across the center of dilation
  • Example: Scale factor k = -2 means enlarge by factor 2 AND reflect across center

For a point (x, y) with center at origin:

  • k = 2: (x, y) → (2x, 2y) [enlargement]
  • k = -2: (x, y) → (-2x, -2y) [enlargement + reflection]

The negative sign flips the figure to the opposite side of the center while changing its size.

Question: How do dilations relate to similarity? Are all dilated figures similar to the original?

Answer: Yes, all dilated figures are similar to the original! This is the fundamental connection:

Definition of Similarity: Two figures are similar if one can be transformed into the other by a dilation followed by rigid motions (translations, rotations, reflections).

Properties preserved in dilations:

  • Angle measures remain the same
  • Parallel lines remain parallel
  • Shapes remain the same
  • Corresponding sides are proportional

Every dilation produces a figure that is similar to the original because it maintains the same shape while changing size proportionally.

Question: Why does area change by the square of the scale factor? Why isn't it just multiplied by the scale factor?

Answer: This happens because area is a two-dimensional measurement:

Concept: Area involves two dimensions (length × width), so both dimensions scale by the scale factor.

Example with rectangle:

  • Original: length = l, width = w, area = l × w
  • After dilation with scale factor k: new length = kl, new width = kw
  • New area = (kl) × (kw) = k²lw = k² × (original area)

This applies to all shapes because any area can be thought of as composed of small squares, and each square's area changes by k².

Similarly, volume changes by k³ for three-dimensional figures.