Solved Exercises on Identifying Transformations in Grade 8

Master identifying transformations: translation, rotation, reflection, and dilation with coordinate analysis through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Translation Identification
Exercise 1
Determine the transformation that maps triangle ABC with vertices A(1, 2), B(4, 2), C(2, 5) to triangle A'B'C' with vertices A'(4, 6), B'(7, 6), C'(5, 9).
Definition:

Translation: A transformation that moves every point of a figure the same distance in the same direction. The mapping rule is (x, y) → (x + a, y + b).

Identification Method: Compare corresponding coordinates to find consistent change.

Identification Method:
  1. Compare corresponding points: A to A', B to B', C to C'
  2. Calculate the change in x-coordinates and y-coordinates
  3. Verify that the change is consistent for all points
  4. Write the transformation rule
Pre-image
A(1,2), B(4,2), C(2,5)
Image
A'(4,6), B'(7,6), C'(5,9)
Rule
(x,y)→(x+3,y+4)
Step 1: Compare A to A'

A(1, 2) → A'(4, 6)

Change in x: 4 - 1 = 3

Change in y: 6 - 2 = 4

Step 2: Compare B to B'

B(4, 2) → B'(7, 6)

Change in x: 7 - 4 = 3

Change in y: 6 - 2 = 4

Step 3: Compare C to C'

C(2, 5) → C'(5, 9)

Change in x: 5 - 2 = 3

Change in y: 9 - 5 = 4

Step 4: Identify the transformation

All points move 3 units right and 4 units up

Rule: (x, y) → (x + 3, y + 4)

This is a translation

Translation: (x,y)→(x+3,y+4)
Final answer:

The transformation is a translation with the rule (x, y) → (x + 3, y + 4). Each point moves 3 units to the right and 4 units up.

Applied rules:

• Translation Rule: (x, y) → (x + a, y + b)

• Consistent Change: All points move by the same amount

• Coordinate Analysis: Compare corresponding coordinates

2 Rotation Identification
Exercise 2
Point P(3, 4) is mapped to P'(-4, 3). Determine the type of transformation and its characteristics.
Rotation Properties:

Rotation: A transformation that turns a figure around a fixed point (center of rotation) by a given angle.

Special Case: 90° counterclockwise rotation about origin: (x, y) → (-y, x).

Pre-image
P(3,4)
Image
P'(-4,3)
Rule
(x,y)→(-y,x)
Step 1: Analyze the coordinate change

P(3, 4) → P'(-4, 3)

Notice: (3, 4) → (-4, 3)

Original x-coordinate (3) becomes new y-coordinate (3)

Original y-coordinate (4) becomes negative new x-coordinate (-4)

Step 2: Compare with rotation rules

For 90° CCW rotation about origin: (x, y) → (-y, x)

Applying to P(3, 4): (3, 4) → (-4, 3)

This matches our transformation!

Step 3: Verify with distance preservation

Distance from origin to P: √(3² + 4²) = √(9 + 16) = √25 = 5

Distance from origin to P': √((-4)² + 3²) = √(16 + 9) = √25 = 5

Distance preserved → confirms rotation

Step 4: Identify the transformation

Rotation of 90° counterclockwise about the origin

Rule: (x, y) → (-y, x)

90° CCW rotation about origin
Final answer:

The transformation is a 90° counterclockwise rotation about the origin with the rule (x, y) → (-y, x).

Applied rules:

• Rotation Rule: 90° CCW: (x, y) → (-y, x)

• Distance Preservation: Rotations preserve distance to center

• Coordinate Pattern: Look for specific rotation patterns

3 Reflection Identification
Exercise 3
Determine the transformation that maps rectangle QRST with vertices Q(2, 1), R(5, 1), S(5, 4), T(2, 4) to rectangle Q'R'S'T' with vertices Q'(2, -1), R'(5, -1), S'(5, -4), T'(2, -4).
Reflection Properties:

Reflection: A transformation that creates a mirror image of a figure across a line (line of reflection).

Pattern Recognition: Look for consistent changes in one coordinate.

Pre-image
Q(2,1), R(5,1), S(5,4), T(2,4)
Image
Q'(2,-1), R'(5,-1), S'(5,-4), T'(2,-4)
Rule
(x,y)→(x,-y)
Step 1: Compare corresponding coordinates

Q(2, 1) → Q'(2, -1): x stays 2, y changes from 1 to -1

R(5, 1) → R'(5, -1): x stays 5, y changes from 1 to -1

S(5, 4) → S'(5, -4): x stays 5, y changes from 4 to -4

T(2, 4) → T'(2, -4): x stays 2, y changes from 4 to -4

Step 2: Identify the pattern

In all cases: x-coordinate remains unchanged

In all cases: y-coordinate changes sign (becomes negative)

This is the pattern for reflection over the x-axis

Step 3: Verify the reflection rule

Reflection over x-axis: (x, y) → (x, -y)

Q(2, 1) → (2, -1) ✓

R(5, 1) → (5, -1) ✓

S(5, 4) → (5, -4) ✓

T(2, 4) → (2, -4) ✓

Step 4: Identify the transformation

Reflection over the x-axis

Rule: (x, y) → (x, -y)

Reflection over x-axis: (x,y)→(x,-y)
Final answer:

The transformation is a reflection over the x-axis with the rule (x, y) → (x, -y).

Applied rules:

• Reflection Rule: Over x-axis: (x, y) → (x, -y)

• Pattern Recognition: One coordinate changes sign consistently

• Axis Reflection: Only one coordinate changes

Transformation Identification Patterns
\(Translation: (x, y) \rightarrow (x+a, y+b)\)
Translation
\(Rotation: (x, y) \rightarrow (-y, x) \text{ (90° CCW)}\)
Rotation
Translation
Constant change
All points move same distance
Rotation
Coordinate swap/sign
Distance to center preserved
Reflection
One coordinate changes
Flip over axis/line
Dilation
Proportional change
Scale factor applied
Translation Pattern: (x+a, y+b) - constant addition/subtraction
Rotation Pattern: (x,y)→(-y,x) or (y,-x) - coordinate swapping
Reflection Pattern: One coordinate changes sign consistently
Solution: Exercises 4 to 5
4 Dilation Identification
Exercise 4
Triangle XYZ with vertices X(2, 1), Y(4, 1), Z(3, 4) is mapped to triangle X'Y'Z' with vertices X'(6, 3), Y'(12, 3), Z'(9, 12). Determine the transformation.
Dilation Properties:

Dilation: A transformation that changes the size of a figure while preserving its shape. It's characterized by a scale factor k and a center of dilation.

Special Case: Dilation at origin: (x, y) → (kx, ky).

Pre-image
X(2,1), Y(4,1), Z(3,4)
Image
X'(6,3), Y'(12,3), Z'(9,12)
Rule
(x,y)→(3x,3y)
Step 1: Analyze the coordinate relationships

X(2, 1) → X'(6, 3): 6 = 3×2, 3 = 3×1

Y(4, 1) → Y'(12, 3): 12 = 3×4, 3 = 3×1

Z(3, 4) → Z'(9, 12): 9 = 3×3, 12 = 3×4

Step 2: Identify the scale factor

Each coordinate is multiplied by 3

Scale factor k = 3

Rule appears to be: (x, y) → (3x, 3y)

Step 3: Verify the center of dilation

Check if origin (0, 0) maps to itself: (0, 0) → (3×0, 3×0) = (0, 0)

Yes, origin is preserved → center of dilation is at origin

Step 4: Verify with distance scaling

Distance from origin to X: √(2² + 1²) = √5

Distance from origin to X': √(6² + 3²) = √45 = 3√5

Ratio: 3√5/√5 = 3 ✓

Step 5: Identify the transformation

Dilation with scale factor 3 and center at origin

Rule: (x, y) → (3x, 3y)

Dilation: (x,y)→(3x,3y), k=3
Final answer:

The transformation is a dilation with scale factor 3 and center at the origin, with the rule (x, y) → (3x, 3y).

Applied rules:

• Dilation Rule: At origin: (x, y) → (kx, ky)

• Scale Factor: Consistent multiplicative factor

• Center Verification: Fixed point under transformation

5 Complex Transformation
Exercise 5
Point A(1, 2) is mapped to A'(5, 6), and point B(3, 4) is mapped to B'(7, 8). Determine the transformation and verify it's consistent.
Complex Transformation Analysis:

Multiple Points Verification: Use multiple point pairs to confirm transformation type and parameters.

Consistency Check: Ensure the same rule applies to all point pairs.

Points
A(1,2)→A'(5,6), B(3,4)→B'(7,8)
Analysis
Δx=4, Δy=4
Rule
(x,y)→(x+4,y+4)
Step 1: Analyze transformation from A to A'

A(1, 2) → A'(5, 6)

Change in x: 5 - 1 = 4

Change in y: 6 - 2 = 4

Step 2: Analyze transformation from B to B'

B(3, 4) → B'(7, 8)

Change in x: 7 - 3 = 4

Change in y: 8 - 4 = 4

Step 3: Compare the changes

Both points move 4 units right and 4 units up

The change is consistent

This indicates a translation

Step 4: Write the transformation rule

Rule: (x, y) → (x + 4, y + 4)

Verify: A(1, 2) → (1+4, 2+4) = (5, 6) ✓

Verify: B(3, 4) → (3+4, 4+4) = (7, 8) ✓

Step 5: Identify the transformation

Translation with vector (4, 4)

Rule: (x, y) → (x + 4, y + 4)

Translation: (x,y)→(x+4,y+4)
Final answer:

The transformation is a translation with the rule (x, y) → (x + 4, y + 4). Each point moves 4 units right and 4 units up.

Applied rules:

• Multiple Points: Use multiple point pairs to verify consistency

• Translation Pattern: Constant additive change in coordinates

• Verification: Check rule with all given points

Transformation Identification Laws, Methods, Definitions
\(Translation: (x, y) \rightarrow (x+a, y+b)\)
Translation Rule
\(Dilation: (x, y) \rightarrow (kx, ky)\)
Dilation Rule
Key definitions:

Translation: Moves every point the same distance in the same direction. Identified by constant additive changes in coordinates.

Rotation: Turns a figure around a fixed point. Identified by specific coordinate swapping and sign changes.

Reflection: Creates a mirror image across a line. Identified by consistent sign change in one coordinate.

Dilation: Changes size while preserving shape. Identified by proportional multiplicative changes in coordinates.

Complete identification methodology:
  1. Compare Coordinates: Calculate the change from pre-image to image
  2. Look for Patterns: Identify consistent changes across all points
  3. Match with Rules: Compare pattern with known transformation rules
  4. Verify: Apply the rule to all given points to confirm
  5. State Parameters: Specify scale factor, angle, or translation vector
Tip 1: For translation, look for constant additive changes in coordinates.
Tip 2: For rotation, look for coordinate swapping with sign changes.
Tip 3: For reflection, look for consistent sign change in one coordinate.
Tip 4: For dilation, look for consistent multiplicative changes.
Tip 5: Always verify with multiple points to ensure consistency.
Common errors: Confusing transformation types, not checking all points, misreading coordinates.
Exam preparation: Memorize transformation rules, practice pattern recognition, verify with multiple points.
Rules to know by heart:

• Translation: (x, y) → (x + a, y + b)

• 90° CCW rotation: (x, y) → (-y, x)

• 90° CW rotation: (x, y) → (y, -x)

• Reflection over x-axis: (x, y) → (x, -y)

• Reflection over y-axis: (x, y) → (-x, y)

• Dilation at origin: (x, y) → (kx, ky)

Transformation Identification Guide
Transformation Characteristics
Quick reference guide for identifying transformations based on coordinate changes:
• Translation: Same change added to all coordinates
• Rotation: Coordinates swapped with specific sign changes
• Reflection: One coordinate changes sign consistently
• Dilation: All coordinates multiplied by same factor

Analysis: The chart shows how different transformations affect coordinate values.

  • Translation shifts coordinates by constant amounts
  • Rotation changes coordinate values based on trigonometric relationships
  • Reflection changes sign of coordinates relative to axis of symmetry
  • Dilation scales coordinates by the same factor

Questions & Answers

Question: How can I tell the difference between a 90° clockwise rotation and a 90° counterclockwise rotation just by looking at the coordinates?

Answer: The coordinate patterns are different for clockwise vs counterclockwise rotations:

  • 90° CCW (Counterclockwise): (x, y) → (-y, x)
  • 90° CW (Clockwise): (x, y) → (y, -x)

Example: Starting with point (3, 4)

  • 90° CCW: (3, 4) → (-4, 3)
  • 90° CW: (3, 4) → (4, -3)

Notice how in CCW, the x becomes negative y and y becomes positive x, while in CW, x becomes positive y and y becomes negative x.

Question: How do I identify reflections over lines other than the axes, like y = x or y = -x?

Answer: Reflections over diagonal lines have specific coordinate patterns:

  • Reflection over y = x: (x, y) → (y, x) [coordinates swap]
  • Reflection over y = -x: (x, y) → (-y, -x) [coordinates swap and change signs]

Example: For point (2, 5)

  • Over y = x: (2, 5) → (5, 2)
  • Over y = -x: (2, 5) → (-5, -2)

The key is recognizing that points reflect to the other side of the line of symmetry.

Question: What if the dilation doesn't have its center at the origin? How do I identify it then?

Answer: For dilation with center at point (h, k), the rule is more complex:

General dilation rule: (x, y) → (h + k(x - h), k + k(y - k))

Identification method:

  • Look for a fixed point that doesn't move
  • This fixed point is the center of dilation
  • Calculate distances from center to points and their images
  • Check if distance ratios are constant

The scale factor is the constant ratio of distances from the center to corresponding points.