Solved Exercises on Rigid Transformations in Grade 10

Master rigid transformations: translations, rotations, reflections, and their properties through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Translation Transformation
Exercise 1
Translate triangle ABC with vertices A(2, 3), B(5, 1), and C(4, 6) by the vector (3, -2).
Definition:

Translation: A rigid transformation that moves every point of a figure the same distance in the same direction. For translation by vector (h, k), each point (x, y) maps to (x+h, y+k).

Translation method:
  1. Identify the translation vector (h, k)
  2. Add h to each x-coordinate
  3. Add k to each y-coordinate
  4. List the new coordinates
Original
A(2,3), B(5,1), C(4,6)
Vector
(3,-2)
Translated
A'(5,1), B'(8,-1), C'(7,4)
Step 1: Identify the translation vector

Translation vector: (h, k) = (3, -2)

Step 2: Apply translation to point A

A(2, 3) → A'(2+3, 3-2) = A'(5, 1)

Step 3: Apply translation to point B

B(5, 1) → B'(5+3, 1-2) = B'(8, -1)

Step 4: Apply translation to point C

C(4, 6) → C'(4+3, 6-2) = C'(7, 4)

A'(5, 1), B'(8, -1), C'(7, 4)
Final answer:

The translated triangle has vertices A'(5, 1), B'(8, -1), and C'(7, 4)

Applied rules:

• Translation Rule: (x, y) → (x+h, y+k)

• Vector Addition: Add translation components to coordinates

• Rigid Transformation: Preserves shape and size

2 Rotation Transformation
Exercise 2
Rotate point P(4, 2) 90° counterclockwise about the origin. Then rotate it 180° about the origin.
Definition:

Rotation: A rigid transformation that turns a figure around a fixed point (center of rotation). For rotations about the origin: 90° CCW: (x, y) → (-y, x); 180°: (x, y) → (-x, -y).

Original
P(4,2)
90° CCW
P'(-2,4)
180°
P''(-4,-2)
Step 1: Apply 90° counterclockwise rotation

Rule: (x, y) → (-y, x)

P(4, 2) → P'(-2, 4)

Step 2: Apply 180° rotation

Rule: (x, y) → (-x, -y)

P(4, 2) → P''(-4, -2)

Step 3: Verify the rotation properties

Distance from origin is preserved: OP = OP' = OP'' = √(4² + 2²) = √20

Step 4: General rotation rules

90° CCW: (x, y) → (-y, x)

90° CW: (x, y) → (y, -x)

180°: (x, y) → (-x, -y)

270° CCW: (x, y) → (y, -x)

90° CCW: P'(-2, 4), 180°: P''(-4, -2)
Final answer:

After 90° CCW rotation: P'(-2, 4); After 180° rotation: P''(-4, -2)

Applied rules:

• 90° CCW Rotation: (x, y) → (-y, x)

• 180° Rotation: (x, y) → (-x, -y)

• Distance Preservation: Rigid transformation property

3 Reflection Transformation
Exercise 3
Reflect triangle ABC with vertices A(3, 4), B(1, 2), and C(5, 1) across the y-axis. Then reflect it across the x-axis.
Definition:

Reflection: A rigid transformation that flips a figure across a line (line of reflection). Across y-axis: (x, y) → (-x, y); Across x-axis: (x, y) → (x, -y).

Original
A(3,4), B(1,2), C(5,1)
Across y-axis
A'(-3,4), B'(-1,2), C'(-5,1)
Across x-axis
A''(3,-4), B''(1,-2), C''(5,-1)
Step 1: Reflect across y-axis

Rule: (x, y) → (-x, y)

A(3, 4) → A'(-3, 4)

B(1, 2) → B'(-1, 2)

C(5, 1) → C'(-5, 1)

Step 2: Reflect across x-axis

Rule: (x, y) → (x, -y)

A(3, 4) → A''(3, -4)

B(1, 2) → B''(1, -2)

C(5, 1) → C''(5, -1)

Step 3: Verify properties

All distances are preserved in reflection

Orientation is reversed in reflection

Step 4: General reflection rules

Across y-axis: (x, y) → (-x, y)

Across x-axis: (x, y) → (x, -y)

Across line y=x: (x, y) → (y, x)

Across y-axis: A'(-3,4), B'(-1,2), C'(-5,1)
Across x-axis: A''(3,-4), B''(1,-2), C''(5,-1)
Final answer:

Reflection across y-axis: A'(-3,4), B'(-1,2), C'(-5,1)
Reflection across x-axis: A''(3,-4), B''(1,-2), C''(5,-1)

Applied rules:

• Y-axis Reflection: (x, y) → (-x, y)

• X-axis Reflection: (x, y) → (x, -y)

• Rigid Transformation: Preserves distances and angles

Rigid Transformation Properties and Rules
\((x, y) \rightarrow (x+h, y+k)\)
Translation
Rotation 90° CCW
\((x, y) \rightarrow (-y, x)\)
Counterclockwise about origin
Reflection across y-axis
\((x, y) \rightarrow (-x, y)\)
Flip horizontally
Reflection across x-axis
\((x, y) \rightarrow (x, -y)\)
Flip vertically
Key definitions:

Rigid Transformation: A transformation that preserves distances and angles (isometry)

Translation: Moving every point by the same vector

Rotation: Turning around a fixed point by a given angle

Reflection: Flipping across a line of symmetry

Rigid transformation methods:
  1. Translation: Add the same vector to each coordinate
  2. Rotation: Apply rotation rules based on angle and center
  3. Reflection: Apply reflection rules based on line of symmetry
  4. Verification: Check that distances and angles are preserved
Tip 1: Remember: rigid transformations preserve shape and size.
Tip 2: For rotations, visualize the movement of points around the center.
Tip 3: In reflections, the line of reflection is the perpendicular bisector of segments connecting pre-image and image points.
Tip 4: Always verify that corresponding sides and angles remain equal after transformation.
Common errors: Forgetting to apply transformation to all points, mixing up rotation directions, misapplying reflection rules, not preserving distances.
Memory aid: "Rigid = rigid = same size and shape!"
Essential rigid transformation rules:

• Translation: (x, y) → (x+h, y+k)

• 90° CCW rotation: (x, y) → (-y, x)

• 180° rotation: (x, y) → (-x, -y)

• 270° CCW rotation: (x, y) → (y, -x)

• Y-axis reflection: (x, y) → (-x, y)

• X-axis reflection: (x, y) → (x, -y)

Transformation Properties Comparison
Exercise 6: Rigid Transformation Effects
Compare how different rigid transformations affect a point (3,4):
- Translation by (2,-1): (5,3)
- 90° CCW rotation: (-4,3)
- Reflection across y-axis: (-3,4)
- Reflection across x-axis: (3,-4)

Analysis: All transformations preserve distance from origin, but change position/orientation differently.

  • Translation: Changes position, preserves orientation
  • Rotation: Changes position and orientation
  • Reflection: Changes position and reverses orientation

Questions & Answers

Question: Why are these transformations called "rigid"? What makes them different from other transformations?

Answer: Transformations are called "rigid" because they preserve the "rigidity" or structure of the geometric figure. Specifically:

  • Distance preservation: The distance between any two points in the pre-image equals the distance between corresponding points in the image
  • Angle preservation: All angle measures remain unchanged
  • Size preservation: The shape and size of the figure remain the same
  • Area preservation: The area of the figure is unchanged

This distinguishes rigid transformations from non-rigid transformations like dilations, which change the size of the figure while preserving shape. Rigid transformations are also called "isometries" because they preserve distances ("iso" = same, "metry" = measure).

The term "rigid" emphasizes that the transformation doesn't bend, stretch, or compress the figure in any way.

Question: What is meant by "orientation" in transformations? Which transformations preserve it and which don't?

Answer: Orientation refers to the order in which the vertices of a figure are traversed (clockwise or counterclockwise). If you trace the vertices of a triangle ABC in order:

  • Preserved orientation: The image vertices A'B'C' follow the same order (both clockwise or both counterclockwise)
  • Reversed orientation: The image vertices A'B'C' follow the opposite order

Orientations preserved: Translations and rotations preserve orientation. If you traced the original triangle ABC counterclockwise, the transformed triangle A'B'C' will also be traced counterclockwise.

Orientations reversed: Reflections reverse orientation. If you traced the original triangle ABC counterclockwise, the reflected triangle A'B'C' will be traced clockwise.

This is why reflections are said to create mirror images - they reverse the orientation of the figure.

Question: What happens when you combine multiple rigid transformations? Is the result still rigid?

Answer: Yes, when you compose (combine) multiple rigid transformations, the result is still a rigid transformation. This is a fundamental property of rigid transformations.

For example:

  • Translation followed by rotation is still rigid
  • Reflection followed by translation is still rigid
  • Two reflections result in either a translation or rotation (still rigid)

The set of all rigid transformations forms what mathematicians call a "group" because:

  • The composition of two rigid transformations is rigid
  • Every rigid transformation has an inverse that is also rigid
  • There exists an identity transformation (doing nothing)

This closure property means that no matter how many rigid transformations you combine, the final result will always preserve distances and angles, maintaining the "rigidity" of the transformation.