Solved Exercises on Surface Area of Prisms and Cylinders in Grade 10

Master surface area calculations: prisms, cylinders, nets, lateral areas, and total surface areas through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Rectangular Prism Surface Area
Exercise 1
Find the surface area of a rectangular prism with length 8 cm, width 5 cm, and height 3 cm.
Definition:

Surface Area of a Rectangular Prism: Sum of the areas of all six faces. Formula: SA = 2(lw + lh + wh)

Calculation method:
  1. Identify the dimensions: length (l), width (w), height (h)
  2. Calculate the area of each pair of opposite faces
  3. Apply the formula: SA = 2(lw + lh + wh)
  4. Substitute values and compute
Dimensions
l=8, w=5, h=3
Formula
SA = 2(lw + lh + wh)
Result
158 cm²
Step 1: Identify dimensions

Length (l) = 8 cm, Width (w) = 5 cm, Height (h) = 3 cm

Step 2: Calculate face areas

Front/back faces: l × h = 8 × 3 = 24 cm² (×2 = 48 cm²)

Top/bottom faces: l × w = 8 × 5 = 40 cm² (×2 = 80 cm²)

Left/right faces: w × h = 5 × 3 = 15 cm² (×2 = 30 cm²)

Step 3: Apply the formula

SA = 2(lw + lh + wh)

SA = 2(8×5 + 8×3 + 5×3)

SA = 2(40 + 24 + 15)

SA = 2(79) = 158 cm²

Surface Area = 158 cm²
Final answer:

The surface area of the rectangular prism is 158 cm²

Applied rules:

• Surface Area Formula: SA = 2(lw + lh + wh)

• Face Areas: Opposite faces are equal in area

• Units: Surface area is measured in square units

2 Triangular Prism Surface Area
Exercise 2
Find the surface area of a triangular prism with base sides 3 cm, 4 cm, 5 cm, and height 10 cm.
Definition:

Surface Area of a Triangular Prism: Sum of the areas of two triangular bases and three rectangular lateral faces. Formula: SA = 2(Base Area) + Lateral Area

Dimensions
Base: 3,4,5; Height: 10
Formula
SA = 2(½bh) + Ph
Result
132 cm²
Step 1: Identify the shape

This is a right triangular prism since the base is a 3-4-5 triangle (Pythagorean triple)

Step 2: Calculate base area

Area of triangular base = ½ × base × height = ½ × 3 × 4 = 6 cm²

Since there are 2 bases: 2 × 6 = 12 cm²

Step 3: Calculate lateral area

Lateral area = Perimeter of base × height of prism

Perimeter = 3 + 4 + 5 = 12 cm

Lateral area = 12 × 10 = 120 cm²

Step 4: Calculate total surface area

SA = Base areas + Lateral area = 12 + 120 = 132 cm²

Surface Area = 132 cm²
Final answer:

The surface area of the triangular prism is 132 cm²

Applied rules:

• Triangular Prism SA: SA = 2(Base Area) + (Perimeter × Height)

• Base Area: For right triangle, A = ½bh

• Lateral Area: Perimeter of base × height of prism

3 Cylinder Surface Area
Exercise 3
Find the surface area of a cylinder with radius 4 cm and height 7 cm. Use π ≈ 3.14.
Definition:

Surface Area of a Cylinder: Sum of areas of two circular bases and the curved lateral surface. Formula: SA = 2πr² + 2πrh

Dimensions
r=4, h=7
Formula
SA = 2πr² + 2πrh
Result
≈276.32 cm²
Step 1: Identify dimensions

Radius (r) = 4 cm, Height (h) = 7 cm

Step 2: Calculate base areas

Area of one circular base = πr² = π × 4² = 16π cm²

Area of two bases = 2 × 16π = 32π cm²

Step 3: Calculate lateral surface area

Lateral surface area = 2πrh = 2 × π × 4 × 7 = 56π cm²

Step 4: Calculate total surface area

SA = 2πr² + 2πrh = 32π + 56π = 88π cm²

SA = 88 × 3.14 ≈ 276.32 cm²

Surface Area ≈ 276.32 cm²
Final answer:

The surface area of the cylinder is approximately 276.32 cm²

Applied rules:

• Cylinder SA Formula: SA = 2πr² + 2πrh

• Base Area: Area of circle = πr²

• Lateral Area: Circumference × height = 2πr × h

Surface Area Formulas and Properties
\(SA = 2(lw + lh + wh)\)
Rectangular Prism
Triangular Prism
\(SA = 2B + Ph\)
B = base area, P = perimeter, h = height
Cylinder
\(SA = 2πr^2 + 2πrh\)
r = radius, h = height
General Prism
\(SA = 2B + Ph\)
B = base area, P = perimeter, h = height
Key definitions:

Surface Area: Total area of all faces/surfaces of a 3D shape

Lateral Area: Area of all side faces, excluding bases

Net: 2D representation of a 3D shape when unfolded

Surface Area calculation methods:
  1. Rectangular Prism: Count 6 faces, use SA = 2(lw + lh + wh)
  2. Triangular Prism: 2 triangular bases + 3 rectangular sides
  3. Cylinder: 2 circular bases + curved lateral surface
  4. General Prism: 2 bases + lateral area = 2B + Ph
Tip 1: Draw the net of the shape to visualize all faces.
Tip 2: Remember that opposite faces of rectangular prisms have equal areas.
Tip 3: For cylinders, lateral area is circumference × height.
Tip 4: Always include units in your final answer (cm², m², etc.).
Common errors: Forgetting to multiply base areas by 2, confusing lateral area with total surface area, using wrong formulas for different shapes.
Memory aid: "Surface area is all the wrapping paper needed to cover a gift box."
Essential formulas to memorize:

• Rectangular Prism: SA = 2(lw + lh + wh)

• Cube: SA = 6s² (where s is side length)

• General Prism: SA = 2B + Ph

• Cylinder: SA = 2πr² + 2πrh

• Circle: A = πr², C = 2πr

Comparative Analysis: Surface Area Relationships
Exercise 6: Surface Area Comparison
Compare surface areas of different shapes with equal volumes:
- Cube with side 4 cm
- Rectangular prism with dimensions 4×4×4 cm
- Cylinder with radius 2.52 cm and height 4.02 cm (same volume as cube)

Analysis: Different shapes with the same volume have different surface areas.

  • Cube: SA = 6s² = 6(4²) = 96 cm²
  • Rectangular prism: SA = 2(4×4 + 4×4 + 4×4) = 96 cm²
  • Cylinder: SA = 2πr² + 2πrh = 2π(2.52²) + 2π(2.52)(4.02) ≈ 103.7 cm²

Questions & Answers

Question: Why does the formula for a triangular prism's surface area use the perimeter of the base multiplied by the height for the lateral area? It seems different from rectangular prisms.

Answer: Great observation! The key is understanding the structure of prisms:

  • For any prism, the lateral area is the perimeter of the base multiplied by the height of the prism.
  • In a rectangular prism, the perimeter is 2(l+w), so the lateral area is 2(l+w)h.
  • In a triangular prism, the perimeter is the sum of the three sides of the triangle, so the lateral area is (side₁ + side₂ + side₃)h.

The general formula for any prism is: SA = 2(Base Area) + (Perimeter of Base) × (Height of Prism).

This explains why the rectangular prism formula SA = 2(lw + lh + wh) can also be written as SA = 2(lw) + 2(l+w)h, where 2(l+w) is the perimeter of the rectangular base.

Question: How do I remember whether the lateral area of a cylinder is πr²h or 2πrh? I keep mixing up the formulas.

Answer: Here's a helpful way to remember the difference:

  • Base area of cylinder: πr² (area of one circular base)
  • Lateral area of cylinder: 2πrh (think of it as "unrolling" the curved surface into a rectangle with width = circumference = 2πr and height = h)
  • Volume of cylinder: πr²h (base area × height)

Think of it this way: For lateral area, imagine cutting the cylinder vertically and flattening it out - you get a rectangle with dimensions (circumference) × (height) = 2πr × h = 2πrh.

A good memory trick: The lateral area has two parts - 2πr (the "edge" of the circle) and h (the height), so it's 2πrh.

Question: When calculating surface area, how do I know if I need to include both bases or just one? Like in some problems about containers or pipes.

Answer: The context of the problem determines which surfaces to include:

  • Complete solid: Include all surfaces (both bases and lateral area) unless specified otherwise
  • Open container: May exclude the top (one base missing)
  • Pipe or tube: Usually only lateral surface area (no bases)
  • Word problems: Carefully read to determine which surfaces are relevant

Always pay attention to the problem wording. If it says "closed cylinder," include both bases. If it says "pipe" or "tubing," typically only the lateral surface matters. For containers, consider if the top is open or closed.

When in doubt, calculate the total surface area including all surfaces, then subtract any surfaces that shouldn't be included based on the problem context.