Solved Exercises on Surface Area of Pyramids and Cones in Grade 10

Master surface area calculations: pyramids, cones, slant heights, lateral areas, and total surface areas through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Square Pyramid Surface Area
Exercise 1
Find the surface area of a square pyramid with base edge length 6 cm and slant height 8 cm.
Definition:

Surface Area of a Square Pyramid: Sum of the base area and the area of four triangular faces. Formula: SA = B + ½Pl, where B is base area, P is perimeter of base, and l is slant height.

Calculation method:
  1. Calculate the base area (square base: B = s²)
  2. Calculate the perimeter of the base (P = 4s)
  3. Calculate the lateral area (LA = ½Pl)
  4. Add base area and lateral area
Dimensions
s=6, l=8
Formula
SA = B + ½Pl
Result
132 cm²
Step 1: Calculate base area

Base is a square with side length 6 cm

Base area B = s² = 6² = 36 cm²

Step 2: Calculate perimeter of base

Perimeter P = 4s = 4 × 6 = 24 cm

Step 3: Calculate lateral area

Lateral area LA = ½Pl = ½ × 24 × 8 = 96 cm²

Step 4: Calculate total surface area

SA = Base area + Lateral area = 36 + 96 = 132 cm²

Surface Area = 132 cm²
Final answer:

The surface area of the square pyramid is 132 cm²

Applied rules:

• Pyramid SA Formula: SA = B + ½Pl

• Base Area: For square base, A = s²

• Lateral Area: Sum of triangular face areas = ½Pl

2 Triangular Pyramid Surface Area
Exercise 2
Find the surface area of a triangular pyramid (tetrahedron) with equilateral triangle faces of side length 5 cm.
Definition:

Surface Area of a Triangular Pyramid: Sum of the areas of all four triangular faces. For regular tetrahedron, SA = 4 × (Area of one equilateral triangle).

Dimensions
s=5 (all edges)
Formula
SA = 4 × (√3/4)s²
Result
≈43.3 cm²
Step 1: Identify the shape

This is a regular tetrahedron with 4 congruent equilateral triangles

Step 2: Calculate area of one equilateral triangle

Area of equilateral triangle = (√3/4)s²

Area = (√3/4) × 5² = (√3/4) × 25 = 25√3/4 cm²

Step 3: Calculate total surface area

SA = 4 × (25√3/4) = 25√3 cm²

SA = 25 × 1.732 ≈ 43.3 cm²

Step 4: Alternative approach

Each face: Area = ½ × base × height = ½ × 5 × (5√3/2) = 25√3/4 cm²

Total: 4 × (25√3/4) = 25√3 ≈ 43.3 cm²

Surface Area ≈ 43.3 cm²
Final answer:

The surface area of the triangular pyramid is approximately 43.3 cm²

Applied rules:

• Regular Tetrahedron SA: SA = 4 × (Area of one face)

• Equilateral Triangle Area: A = (√3/4)s²

• Height of Equilateral Triangle: h = (s√3)/2

3 Cone Surface Area
Exercise 3
Find the surface area of a cone with radius 3 cm and slant height 5 cm. Use π ≈ 3.14.
Definition:

Surface Area of a Cone: Sum of the circular base area and the curved lateral surface area. Formula: SA = πr² + πrl, where r is radius and l is slant height.

Dimensions
r=3, l=5
Formula
SA = πr² + πrl
Result
≈75.4 cm²
Step 1: Identify dimensions

Radius (r) = 3 cm, Slant height (l) = 5 cm

Step 2: Calculate base area

Base area = πr² = π × 3² = 9π cm²

Step 3: Calculate lateral surface area

Lateral area = πrl = π × 3 × 5 = 15π cm²

Step 4: Calculate total surface area

SA = πr² + πrl = 9π + 15π = 24π cm²

SA = 24 × 3.14 ≈ 75.4 cm²

Surface Area ≈ 75.4 cm²
Final answer:

The surface area of the cone is approximately 75.4 cm²

Applied rules:

• Cone SA Formula: SA = πr² + πrl

• Base Area: Area of circle = πr²

• Lateral Area: πrl (where l is slant height)

Surface Area Formulas and Properties
\(SA = B + \frac{1}{2}Pl\)
Pyramid
Square Pyramid
\(SA = s^2 + 2sl\)
s = base edge, l = slant height
Cone
\(SA = πr^2 + πrl\)
r = radius, l = slant height
General Pyramid
\(SA = B + \frac{1}{2}Pl\)
B = base area, P = perimeter, l = slant height
Key definitions:

Surface Area: Total area of all faces/surfaces of a 3D shape

Slant Height: Distance along the face of a pyramid or cone from the apex to the base edge

Lateral Area: Area of all side faces, excluding the base

Apex: Top vertex of a pyramid or cone

Surface Area calculation methods:
  1. Pyramids: Base area + Lateral area = B + ½Pl
  2. Cones: Base area + Lateral area = πr² + πrl
  3. Regular Pyramids: Calculate one triangular face area and multiply by number of faces
  4. When slant height unknown: Use Pythagorean theorem to find it
Tip 1: Slant height is NOT the same as vertical height of the pyramid/cone.
Tip 2: For pyramids, lateral area = ½ × perimeter of base × slant height.
Tip 3: If given vertical height and radius/base, use Pythagorean theorem to find slant height.
Tip 4: Always include units in your final answer (cm², m², etc.).
Common errors: Confusing slant height with vertical height, forgetting to include the base area, using wrong formula for different pyramid shapes.
Memory aid: "Surface area is all the wrapping paper needed to cover a pyramid or cone."
Essential formulas to memorize:

• General Pyramid: SA = B + ½Pl

• Square Pyramid: SA = s² + 2sl

• Triangular Pyramid: SA = 4 × (Triangle Area)

• Cone: SA = πr² + πrl

• Circle: A = πr², C = 2πr

Comparative Analysis: Surface Area Relationships
Exercise 6: Surface Area Comparison
Compare surface areas of different shapes with equal base perimeters:
- Square pyramid with base edge 4 cm and slant height 6 cm
- Cone with radius 2.55 cm and slant height 6 cm (same base perimeter as square)
- Triangular pyramid with equilateral triangle base of side 5.33 cm and slant height 6 cm (same base perimeter)

Analysis: Different shapes with the same base perimeter have different surface areas.

  • Square pyramid: SA = 16 + 2(4)(6) = 16 + 48 = 64 cm²
  • Cone: SA = π(2.55)² + π(2.55)(6) ≈ 20.43 + 48.07 = 68.5 cm²
  • Triangular pyramid: SA = √3(5.33)²/4 + 3(½ × 5.33 × 6) ≈ 12.32 + 47.97 = 60.29 cm²

Questions & Answers

Question: I'm confused about the difference between slant height and vertical height in pyramids and cones. How do I know which one to use in the formulas?

Answer: Great question! The distinction is crucial:

  • Vertical Height (h): The perpendicular distance from the apex to the base (goes straight down)
  • Slant Height (l): The distance along the face from the apex to the edge of the base (goes diagonally along the surface)

For surface area calculations, you ALWAYS use slant height (l), not vertical height:

  • Pyramid lateral area: ½Pl (uses slant height)
  • Cone lateral area: πrl (uses slant height)

If you're only given the vertical height, you can find the slant height using the Pythagorean theorem. In a cone: l² = r² + h². In a square pyramid: l² = (s/2)² + h², where s is the base edge length.

Question: How do I remember the difference between the formulas for volume and surface area of a cone? They both have πr² in them.

Answer: Here's a helpful way to remember:

  • Volume of cone: V = (1/3)πr²h (has height h, not slant height)
  • Surface Area of cone: SA = πr² + πrl (has slant height l, not h)

Think of it this way:

  • Volume is about "filling" the interior, so it uses vertical height (h)
  • Surface area is about "wrapping" the exterior, so it uses slant height (l)

Also note that volume is in cubic units (cm³) while surface area is in square units (cm²). The volume formula has an extra dimension (h) to make it cubic.

A good memory trick: "Volume goes up and down (vertical height), Surface goes across the slope (slant height)."

Question: When calculating the surface area of a pyramid, how do I know if I need to include the base or not? Some problems seem to ask for just the lateral area.

Answer: The problem wording determines what to calculate:

  • "Surface area": Include both base and lateral faces
  • "Lateral surface area": Only the triangular faces, not the base
  • "Without base": Only the lateral area
  • "Material needed": Usually includes all surfaces unless specified otherwise

Always read carefully:

  • If it says "total surface area" or just "surface area," include the base
  • If it specifically mentions "lateral area" or "excluding the base," only calculate the triangular faces

For word problems, consider the real-world context. If calculating material for a pyramid-shaped tent, you might exclude the base floor. If calculating paint for a pyramid monument, you'd include all surfaces.