Solved Exercises on Volume of Prisms and Cylinders

Master volume of prisms and cylinders: rectangular prisms, triangular prisms, cylinders, and real-world applications with these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Rectangular prism
Exercise 1
Find the volume of a rectangular prism with length 8 cm, width 5 cm, and height 4 cm.
Definition:

Rectangular Prism: A three-dimensional shape with six rectangular faces. Volume Formula: V = length × width × height or V = lwh.

Method:
  1. Identify the three dimensions of the rectangular prism
  2. Apply the volume formula: V = l × w × h
  3. Multiply the three dimensions together
  4. Express the answer in cubic units
Dimensions
l=8, w=5, h=4
Formula
V = lwh
Result
V = 160 cm³
Step 1: Identify the dimensions

Length (l) = 8 cm

Width (w) = 5 cm

Height (h) = 4 cm

Step 2: Apply the volume formula

Volume = Length × Width × Height

V = l × w × h

V = 8 × 5 × 4

Step 3: Calculate the volume

V = 40 × 4 = 160 cubic centimeters

Volume = 160 cm³
Final answer:

The volume of the rectangular prism is 160 cm³.

Applied rules:

• Volume Formula: V = l × w × h

• Cubic Units: Volume is measured in cubic units

• Multiplication: Multiply all three dimensions together

2 Triangular prism
Exercise 2
Find the volume of a triangular prism with a base triangle of base 6 inches and height 4 inches, and a prism height of 10 inches.
Definition:

Triangular Prism: A three-dimensional shape with two triangular bases and three rectangular faces. Volume Formula: V = Base Area × Height = (1/2)bh × H, where b and h are the base triangle's dimensions and H is the prism height.

Triangle
b=6, h=4
Prism H
H=10
Volume
V = 120 in³
Step 1: Calculate the base area

Base area = (1/2) × base × height of triangle

Base area = (1/2) × 6 × 4 = 12 square inches

Step 2: Apply the volume formula

Volume = Base Area × Prism Height

V = 12 × 10

Step 3: Calculate the volume

V = 120 cubic inches

Step 4: Verify the calculation

Check: V = (1/2) × 6 × 4 × 10 = (1/2) × 240 = 120 ✓

Volume = 120 in³
Final answer:

The volume of the triangular prism is 120 in³.

Applied rules:

• Triangular Prism Volume: V = Base Area × Height

• Triangle Area: A = (1/2)bh

• Cubic Units: Volume in cubic units

3 Cylinder volume
Exercise 3
Find the volume of a cylinder with radius 3 feet and height 7 feet. Use π ≈ 3.14.
Definition:

Cylinder: A three-dimensional shape with two parallel circular bases connected by a curved surface. Volume Formula: V = πr²h, where r is the radius and h is the height.

Given
r=3, h=7
Formula
V = πr²h
Result
V ≈ 197.82 ft³
Step 1: Identify the dimensions

Radius (r) = 3 feet

Height (h) = 7 feet

π ≈ 3.14

Step 2: Apply the cylinder volume formula

Volume = π × radius² × height

V = πr²h

V = π × 3² × 7

Step 3: Calculate radius squared

r² = 3² = 9

Step 4: Multiply the values

V = π × 9 × 7 = 63π

Step 5: Calculate using π ≈ 3.14

V = 63 × 3.14 = 197.82 cubic feet

Step 6: Express the final answer

V ≈ 197.82 ft³

Volume ≈ 197.82 ft³
Final answer:

The volume of the cylinder is approximately 197.82 ft³.

Applied rules:

• Cylinder Volume: V = πr²h

• Exponent: Square the radius (r²)

• Decimal Approximation: Use π ≈ 3.14 for calculations

Rules and methods, laws,...
\(V = Bh\)
General Volume Formula
Rectangular Prism
\(V = lwh\)
Length × width × height
Triangular Prism
\(V = \frac{1}{2}bhl\)
Base area × height
Cylinder
\(V = \pi r^2h\)
Base area × height
Key definitions:

Volume: The amount of space inside a three-dimensional object, measured in cubic units.

Prism: A three-dimensional shape with two parallel, congruent bases connected by rectangular faces.

Cylinder: A three-dimensional shape with two parallel circular bases connected by a curved surface.

Base Area: The area of the shape that forms the top and bottom of the prism or cylinder.

Height: The perpendicular distance between the two bases.

Complete methodology:
  1. Identify the shape: Determine if it's a rectangular prism, triangular prism, or cylinder
  2. Identify dimensions: Locate the necessary measurements (length, width, height, radius, etc.)
  3. Select appropriate formula: Use the correct volume formula for the shape
  4. Calculate base area: Find the area of the base shape if needed
  5. Substitute values: Replace variables with known measurements
  6. Perform calculations: Multiply dimensions accurately
  7. Express answer: Include proper cubic units
Important Properties: Volume is always measured in cubic units. The general formula is V = Base Area × Height for all prisms and cylinders.
Measurement Units: Volume units are cubic versions of linear units (cm³, m³, ft³, etc.).

Formulas to know by heart:

• General Volume: V = Bh (Base Area × Height)

• Rectangular Prism: V = lwh

• Cube: V = s³

• Triangular Prism: V = (1/2)bhl

• Cylinder: V = πr²h

Solution: Exercises 4 to 5
4 Finding missing dimension
Exercise 4
A rectangular prism has a volume of 240 cubic inches. If its length is 8 inches and its width is 5 inches, find its height.
Definition:

Formula Rearrangement: The volume formula V = lwh can be rearranged to solve for any variable when the others are known: h = V/(lw).

Given
V=240, l=8, w=5
Formula
h = V/(lw)
Result
h = 6 in
Step 1: Identify known values

Volume (V) = 240 cubic inches

Length (l) = 8 inches

Width (w) = 5 inches

Height (h) = ? (unknown)

Step 2: Start with the volume formula

V = l × w × h

240 = 8 × 5 × h

Step 3: Solve for the unknown height

Divide both sides by (l × w): h = V/(l × w)

h = 240/(8 × 5)

Step 4: Calculate the denominator

8 × 5 = 40

Step 5: Calculate the height

h = 240/40 = 6 inches

Step 6: Verify the answer

Check: V = 8 × 5 × 6 = 240 ✓

Height = 6 inches
Final answer:

The height of the rectangular prism is 6 inches.

Applied rules:

• Formula Rearrangement: V = lwh → h = V/(lw)

• Algebra: Divide both sides by known factors

• Verification: Check answer by substitution

5 Real-world application
Exercise 5
A cylindrical water tank has a radius of 4 feet and a height of 10 feet. If water costs $0.002 per cubic foot, how much would it cost to fill the tank completely?
Definition:

Real-world Application: Using volume calculations to solve practical problems involving cost, capacity, or distribution.

Tank volume
V = π(4²)(10) ≈ 502.4 ft³
Cost per ft³
$0.002
Total cost
502.4×$0.002 = $1.00
Step 1: Calculate the volume of the cylindrical tank

Volume = πr²h

V = π × 4² × 10 = π × 16 × 10 = 160π

V ≈ 160 × 3.14 = 502.4 cubic feet

Step 2: Identify the cost per cubic foot

Cost per cubic foot = $0.002

Step 3: Calculate the total cost

Total cost = Volume × Cost per cubic foot

Total cost = 502.4 × $0.002 = $1.0048

Rounding to nearest cent: $1.00

Step 4: Verify the calculation

Check: 502.4 ft³ × $0.002/ft³ = $1.0048 ≈ $1.00 ✓

Step 5: Consider practical aspects

In reality, tanks might not be filled to 100% capacity for safety reasons

Total cost ≈ $1.00
Final answer:

It would cost approximately $1.00 to fill the cylindrical tank completely.

Applied rules:

• Volume Calculation: Find total volume using cylinder formula

• Cost Calculation: Multiply volume by cost per unit volume

• Real-world Context: Apply mathematical results to practical situations

Comprehensive Summary: Volume of Prisms and Cylinders
\(V = Bh\)
Fundamental Formula
Key Definitions:

Volume: The measure of space inside a three-dimensional shape, expressed in cubic units.

Prism: A three-dimensional figure with two parallel, congruent bases connected by rectangular faces.

Cylinder: A three-dimensional figure with two parallel circular bases connected by a curved surface.

Base Area (B): The area of the shape that forms the top and bottom of the prism or cylinder.

Height (h): The perpendicular distance between the two parallel bases.

Core Methods and Procedures:
  1. Shape Identification: Determine if it's a rectangular prism, triangular prism, or cylinder
  2. Dimension Measurement: Identify all necessary measurements (length, width, height, radius)
  3. Formula Selection: Use appropriate volume formula for the shape
  4. Unit Consistency: Ensure all measurements are in the same units
  5. Calculation: Multiply base area by height
  6. Expression: State the answer in appropriate cubic units
Tip 1: Always ensure the height is measured perpendicular to the base in any prism or cylinder.
Tip 2: Remember that volume is always expressed in cubic units (cm³, m³, ft³, etc.).
Tip 3: You can rearrange volume formulas to find missing dimensions: h = V/B, B = V/h.
Tip 4: The general formula V = Bh applies to all prisms and cylinders.
Tip 5: When working with π, use the value specified in the problem (3.14, 3.14159, etc.).
Common Mistakes: Confusing area with volume, using incorrect base area formula, forgetting cubic units.
Exam Preparation: Memorize all volume formulas, practice finding missing dimensions, work on real-world applications.
Essential Rules and Laws:

• General Volume: V = Bh

• Rectangular Prism: V = lwh

• Triangular Prism: V = (1/2)bhl

• Cylinder: V = πr²h

• Missing Dimensions: h = V/B, B = V/h

• Cubic Units: Volume always expressed in cubic units

• Unit Consistency: All measurements must be in the same units

Example Progression (Simple to Advanced)

Simple: Rectangular prism with given dimensions → V = lwh

Intermediate: Cylinder with radius and height → V = πr²h

Advanced: Real-world problem requiring multiple steps and unit conversions

Questions & Answers

Question: I'm confused about why we multiply by height in the volume formula. How is this different from area?

Answer: Great question! The key difference is dimensionality:

  • Area: Measures two-dimensional space (length × width) - square units
  • Volume: Measures three-dimensional space (length × width × height) - cubic units

Think of it this way:

  • Area tells you how much surface something covers (like a carpet on a floor)
  • Volume tells you how much space something occupies (like how much water a container holds)

For a rectangular prism: Area of base = length × width, then multiply by height to get volume: V = (l × w) × h

For a cylinder: Area of base = πr², then multiply by height: V = (πr²) × h

The height adds the third dimension that transforms a flat area into a three-dimensional volume!

Question: Why do triangular prisms use (1/2)bh for the base area but cylinders use πr²? How do I know which formula to use?

Answer: The base area formula depends on the shape of the base:

  • Triangular Prism: The base is a triangle, so use triangle area formula: A = (1/2)bh
  • Cylinder: The base is a circle, so use circle area formula: A = πr²
  • Rectangular Prism: The base is a rectangle, so use rectangle area formula: A = lw

The general formula is: Volume = Base Area × Height

So you first identify the shape of the base, calculate its area using the appropriate formula, then multiply by the height of the prism/cylinder.

For a triangular prism with triangular base of base=6, height=4, and prism height=10:

  • Base area = (1/2) × 6 × 4 = 12
  • Volume = 12 × 10 = 120

For a cylinder with radius=3, height=7:

  • Base area = π × 3² = 9π
  • Volume = 9π × 7 = 63π

The key is to identify the base shape first!

Question: When I need to find a missing dimension, how do I rearrange the volume formulas? I always get confused.

Answer: The general approach is the same for all volume formulas! Starting with V = Bh (Base Area × Height):

  • To find height: h = V/B (divide volume by base area)
  • To find base area: B = V/h (divide volume by height)

For specific shapes:

  • Rectangular Prism: V = lwh
  • To find l: l = V/(wh)
  • To find w: w = V/(lh)
  • To find h: h = V/(lw)

Example: If V = 120, l = 8, w = 5, find h:

h = V/(l × w) = 120/(8 × 5) = 120/40 = 3

To verify: V = 8 × 5 × 3 = 120 ✓

The key is to isolate the variable you want to find by performing the inverse operation of what's being done to it.

Question: How can I remember all the different volume formulas? Are there any patterns or memory tricks?

Answer: Yes, there are patterns and memory aids!

  • Universal Pattern: All formulas follow V = Base Area × Height
  • Rectangular Prism: V = lwh → "length times width times height"
  • Cylinder: V = πr²h → "pi r squared h" (like a stack of circular pancakes)
  • Triangular Prism: V = (1/2)bhl → "half base times height times length"

Memory tricks:

  • "V = Bh" → "Volume equals Base times Height"
  • For cylinders: "pie are squared" (area of circle) times height
  • For prisms: Same base area stacked up to the height

The key insight is that all these formulas are really the same concept: take the base area and multiply by how tall the shape is!

Practice with different shapes to build familiarity. The more you use the formulas, the more natural they become!

Question: What are some real-world applications of calculating volume? Why is this concept important?

Answer: Volume calculations have numerous practical applications:

  • Construction: Calculating concrete needed for foundations, water storage capacity
  • Manufacturing: Container design, packaging optimization
  • Transportation: Cargo capacity, fuel tank volume
  • Agriculture: Silo capacity, irrigation pond volume
  • Chemistry: Container volume for liquid storage

In construction, knowing the volume of concrete needed for a cylindrical column helps determine material costs. For a column with radius 2 ft and height 10 ft: V = π × 2² × 10 = 40π ≈ 125.6 cubic feet of concrete.

In manufacturing, volume calculations determine how much liquid a container can hold.

These calculations are essential for budgeting materials, planning projects efficiently, and solving real-world measurement problems. Understanding volume also builds the foundation for more advanced geometry concepts.

Volume calculations are fundamental in engineering, architecture, and many other professions that involve measurement and design!