Stem-and-Leaf Plots: Organizing and Analyzing Quantitative Data

Master stem-and-leaf plots: learn construction, interpretation, and analysis of quantitative data distributions through 5 detailed exercises with visual examples and step-by-step solutions.

Solution: Exercises 1 to 3
1 Basic Stem-and-Leaf Construction
Exercise 1
Create a stem-and-leaf plot for the following test scores: 78, 82, 85, 76, 91, 88, 79, 84, 90, 87, 75, 89.
Definition:

Stem-and-Leaf Plot: A graphical display that organizes quantitative data by separating each value into a "stem" (leading digit(s)) and a "leaf" (trailing digit).

Stem-and-leaf construction method:
  1. Identify the stem: Usually the tens digit or higher place value
  2. Identify the leaf: Usually the units digit or lower place value
  3. Arrange stems in order: List stems from smallest to largest
  4. Record leaves: Place leaves in ascending order for each stem
  5. Add a key: Clarify what each stem and leaf represents
Sorted Data
75, 76, 78, 79, 82, 84, 85, 87, 88, 89, 90, 91
Stems
7, 8, 9
Plot
Shown below
Step 1: Sort the data

75, 76, 78, 79, 82, 84, 85, 87, 88, 89, 90, 91

Step 2: Determine stems and leaves

For two-digit numbers, use tens digit as stem and units digit as leaf.

Step 3: Create the stem column

Stems: 7, 8, 9 (covering the range from 75 to 91)

Step 4: Add the leaves for each stem

Stem 7: leaves 5, 6, 8, 9
Stem 8: leaves 2, 4, 5, 7, 8, 9
Stem 9: leaves 0, 1

Step 5: Format the plot

Arrange leaves in ascending order for each stem and add a key.

Stem | Leaf
7 | 5 6 8 9
8 | 2 4 5 7 8 9
9 | 0 1
Key: 7 | 5 = 75
Final answer:

7 | 5 6 8 9
8 | 2 4 5 7 8 9
9 | 0 1
Key: 7 | 5 = 75

Applied rules:

• Stem-Leaf Separation: Maintain consistent digit assignment

• Ascending Order: Arrange leaves in ascending order for each stem

• Key Requirement: Include a key to clarify the representation

2 Distribution Analysis
Exercise 2
Analyze the following stem-and-leaf plot for student heights (in inches): 5 | 8 9 6 | 0 1 2 3 5 6 7 8 9 7 | 0 1 2 Key: 6 | 0 = 60 inches
Definition:

Distribution Shape: The overall pattern of how data values are distributed across the range of possible values. Key features include center, spread, shape, and unusual features.

Minimum
58 inches
Maximum
72 inches
Shape
Roughly symmetric
Step 1: Extract all data values

58, 59, 60, 61, 62, 63, 65, 66, 67, 68, 69, 70, 71, 72

Step 2: Determine the range

Maximum: 72 inches, Minimum: 58 inches
Range: 72 - 58 = 14 inches

Step 3: Analyze the shape

The distribution appears roughly symmetric with a peak in the 60s range.

Step 4: Identify the center

With 14 values, the median is between the 7th and 8th values: (66 + 67)/2 = 66.5 inches.

Step 5: Assess the spread

Most values cluster in the 60s with fewer values in the 50s and 70s.

Min: 58, Max: 72, Median: 66.5, Shape: Symmetric
Final answer:

The distribution of student heights ranges from 58 to 72 inches with a median of 66.5 inches. The distribution appears roughly symmetric.

Applied rules:

• Data Extraction: Read all values from the stem-and-leaf plot

• Shape Recognition: Identify patterns in leaf distribution

• Center Calculation: Use median for ordered data

3 Back-to-Back Plot
Exercise 3
Create a back-to-back stem-and-leaf plot comparing test scores of two classes: Class A: 65, 72, 78, 81, 84, 86, 88, 90, 92, 95 Class B: 68, 70, 73, 75, 77, 79, 80, 82, 85, 88
Definition:

Back-to-Back Stem-and-Leaf Plot: A comparative display that uses a common stem column with leaves extending to both sides to compare two datasets.

Common Stems
6, 7, 8, 9
Class A Leaves
Right side
Class B Leaves
Left side
Step 1: Identify the common stems

Both classes have data in the 60s, 70s, 80s, and 90s, so stems are 6, 7, 8, 9.

Step 2: Organize Class A data

65, 72, 78, 81, 84, 86, 88, 90, 92, 95

Step 3: Organize Class B data

68, 70, 73, 75, 77, 79, 80, 82, 85, 88

Step 4: Create the back-to-back plot

Place Class B leaves on the left and Class A leaves on the right for each stem.

Step 5: Format with a key

Include a key explaining both sides of the plot.

Class B | Stem | Class A
8 | 6 | 5
0 3 5 7 9 | 7 | 2 8
0 2 5 8 | 8 | 1 4 6 8 0 2 5 8
| 9 | 0 2 5
Key: 7 | 2 = 72 (Class A), 3 | 7 | = 73 (Class B)
Final answer:

Class B | Stem | Class A
8 | 6 | 5
0 3 5 7 9 | 7 | 2 8
0 2 5 8 | 8 | 1 4 6 8
| 9 | 0 2 5
Key: 7 | 2 = 72 (Class A), 3 | 7 = 73 (Class B)

Applied rules:

• Back-to-Back Structure: Common stem with leaves on both sides

• Side Assignment: Typically left for first dataset, right for second

• Comparison Feature: Allows direct visual comparison of distributions

Stem-and-Leaf Plots: Key Concepts and Analysis Methods
Stem = Leading Digit(s) | Leaf = Trailing Digit | Value = Stem × 10 + Leaf
Core Components
Stem
Leading digit(s)
Groups values
Leaf
Trailing digit
Individual values
Key
Explanation
Interpretation
Key definitions:

Stem-and-Leaf Plot: A graphical representation that separates each data point into a "stem" (usually the tens digit or higher place value) and a "leaf" (usually the units digit or lower place value).

Stem: The leading digit(s) that group data values into categories.

Leaf: The trailing digit that represents the individual data points within each stem.

Key: An explanation that clarifies how to read the stem-and-leaf plot (e.g., 7 | 5 = 75).

Back-to-Back Plot: A comparative stem-and-leaf plot with a common stem column and leaves extending to both sides.

Complete construction methodology:
  1. Examine the data: Determine appropriate stem and leaf separation
  2. Identify stems: List all possible stem values in ascending order
  3. Record leaves: For each stem, record the corresponding leaves in ascending order
  4. Include a key: Provide an example showing how to interpret the plot
  5. Analyze the plot: Identify center, spread, shape, and unusual features
Tip 1: For decimal values, use the whole number part as the stem and decimal part as the leaf.
Tip 2: Always include a key to avoid ambiguity in interpretation.
Tip 3: Arrange leaves in ascending order to make the plot easier to read and analyze.
Tip 4: Stem-and-leaf plots preserve individual data values, unlike histograms.
Common errors: Incorrectly assigning digits to stems and leaves, not ordering leaves, omitting the key, misreading the plot when values span multiple stems.
Key properties: Preserves original data values, shows distribution shape, works well for small to medium datasets, allows for easy identification of outliers.
Essential rules for construction and interpretation:

• Consistent Separation: Use the same digit assignment for all values

• Ordered Leaves: Arrange leaves in ascending order for each stem

• Key Requirement: Always include a key to clarify interpretation

• Stem Range: Include all stems between minimum and maximum values

• Shape Analysis: Use the plot to identify distribution characteristics

Stem-and-Leaf Analysis Framework
📊
Construction Steps

• Separate each value into stem and leaf

• List stems in ascending order

• Record leaves in ascending order

• Include a key for interpretation

Distribution Features

• Center: Where most values cluster

• Spread: How values are dispersed

• Shape: Symmetric, skewed, uniform

• Outliers: Unusual values

Center Measures

• Median: Middle value in ordered list

• Mode: Most frequent value(s)

• Range: Difference between max and min

• Clustering: Areas with many values

Analysis Process
1
Construct
2
Identify
3
Analyze
4
Interpret
Visual Patterns
Symmetric distributions form balanced shapes, skewed distributions have tails
Master Stem-and-Leaf Plots!
Solution: Exercises 4 to 5
4 Comparative Analysis
Exercise 4
Using the stem-and-leaf plot from Exercise 3, compare the two classes. Which class performed better overall?
Definition:

Comparative Analysis: Examining two or more datasets to identify similarities, differences, and relative performance characteristics.

Class A Median
85
Class B Median
77
Conclusion
Class A better
Step 1: Analyze Class A distribution

Values: 65, 72, 78, 81, 84, 86, 88, 90, 92, 95
Median: Average of 5th and 6th values = (84 + 86)/2 = 85

Step 2: Analyze Class B distribution

Values: 68, 70, 73, 75, 77, 79, 80, 82, 85, 88
Median: Average of 5th and 6th values = (77 + 79)/2 = 78

Step 3: Compare centers

Class A median (85) > Class B median (78), suggesting Class A performed better.

Step 4: Compare ranges

Class A: 65 to 95 (range = 30)
Class B: 68 to 88 (range = 20)
Class A has more variability.

Step 5: Compare highest scores

Class A has higher maximum score (95 vs 88).

Class A performed better with median of 85 vs 78
Final answer:

Class A performed better overall with a higher median score (85 vs 78) and higher maximum score (95 vs 88).

Applied rules:

• Median Comparison: Compare central tendencies

• Range Analysis: Compare variability between datasets

• Overall Performance: Consider center and extremes

5 Outlier Identification
Exercise 5
The following stem-and-leaf plot shows daily temperatures (in °F): 6 | 8 9 7 | 0 2 3 4 5 6 7 8 9 8 | 0 1 2 3 4 5 9 | 8 9 Key: 7 | 5 = 75°F Identify any potential outliers and justify your answer.
Definition:

Outlier: A data point that is significantly different from other observations in the dataset, often lying outside the overall pattern.

Dataset
68, 69, 70, ..., 85, 98, 99
Potential Outliers
98, 99
Justification
Separated by gap
Step 1: List all data values

68, 69, 70, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 98, 99

Step 2: Identify the main cluster

Most values are in the 70s and 80s with a few in the 60s.

Step 3: Look for gaps

There's a significant gap between 85 and 98 (13-degree gap).

Step 4: Apply outlier criteria

Values 98 and 99 appear to be separated from the main distribution by an unusually large gap.

Step 5: Justify the identification

Temperatures of 98°F and 99°F are significantly higher than the main cluster of values, which range from 68°F to 85°F. The 13-degree gap between 85°F and 98°F suggests these values are outliers.

Potential outliers: 98°F and 99°F
Final answer:

Temperatures of 98°F and 99°F are potential outliers due to the large gap (13°F) between these values and the main cluster of data.

Applied rules:

• Gap Analysis: Large gaps between values suggest outliers

• Cluster Identification: Values separated from main cluster are potential outliers

• Contextual Consideration: Consider if values make sense in the problem context

Comprehensive Stem-and-Leaf Analysis Guide
Value = Stem × Place Value + Leaf | Median Position = (n+1)/2 | Quartiles: 25% and 75% points
Key Formulas
Key definitions:

Stem-and-Leaf Plot: A data display that organizes quantitative data by separating each value into a stem (leading digit(s)) and leaf (trailing digit), preserving the original data values while showing the distribution.

Stem: The part of the data value used for grouping (typically tens, hundreds, or thousands place).

Leaf: The part of the data value that distinguishes individual values within each group (typically units, tenths, or hundredths place).

Key: A statement that explains how to read the stem-and-leaf plot (e.g., 7 | 5 = 75).

Back-to-Back Plot: A comparative display with a common stem column and leaves on both sides for comparing two datasets.

Split Stem: A stem that is divided to show more detail, such as using 7L for 70-74 and 7H for 75-79.

Complete analysis methodology:
  1. Construction: Separate each value into stem and leaf, list stems in order, arrange leaves in order
  2. Center Identification: Find median by locating middle position in ordered data
  3. Spread Assessment: Calculate range and identify quartiles
  4. Shape Analysis: Determine symmetry, skewness, and modality
  5. Unusual Features: Identify outliers, gaps, and clusters
Tip 1: For large numbers, use the highest place values as stems (e.g., for 1234, use 12|34).
Tip 2: For decimal values, decide where to split based on precision needed.
Tip 3: If stems have too many leaves, consider splitting stems to improve readability.
Tip 4: Stem-and-leaf plots are excellent for identifying the exact values and distribution shape simultaneously.
Common errors: Misassigning digits to stems and leaves, not ordering leaves, forgetting the key, misreading values when stems span multiple digits, not considering the place value properly.
Key properties: Preserves original data, shows distribution shape, works for small to medium datasets (typically n ≤ 100), allows easy identification of five-number summary.
Essential rules and properties:

• Digit Assignment: Consistently assign digits to stems and leaves across all values

• Ordering: Always arrange leaves in ascending order for each stem

• Key Requirement: Include a key to clarify the plot's interpretation

• Completeness: Include all stems between minimum and maximum values, even if some have no leaves

• Place Value: Understand how stems and leaves relate to actual values

Applications in Statistics and Data Analysis
Advanced Application: Statistical Summaries
Stem-and-leaf plots provide excellent visualization for statistical summaries and are foundational for understanding data distributions in advanced statistics.

Analysis: Stem-and-leaf plots connect to box plots, statistical inference, and data analysis applications.

  • Statistical Summaries: Five-number summary and quartiles
  • Quality Control: Identifying outliers in manufacturing
  • Research: Preliminary data analysis
  • Education: Teaching distribution concepts

Questions & Answers

Question: How do I decide what to use as the stem and what to use as the leaf? Is there a rule?

Answer: The general principle is to use the leading digit(s) as the stem and the trailing digit(s) as the leaf:

  • Two-digit numbers: Tens digit = stem, units digit = leaf (e.g., 73 → 7 | 3)
  • Three-digit numbers: Hundreds/tens = stem, units = leaf (e.g., 173 → 17 | 3) or hundreds = stem, tens = leaf (e.g., 173 → 1 | 73)
  • Decimal numbers: Whole part = stem, decimal part = leaf (e.g., 7.3 → 7 | 3)

The goal is to have enough stems to show the distribution clearly but not so many that the plot becomes unwieldy. Generally, aim for 5-12 stems for optimal readability.

Example: For data ranging from 120 to 195, using the hundreds and tens as stem (12 | 13 | 14 | ...) might create too many stems. Instead, use hundreds as stem (1 | 2 | 3 | ...) with tens and units as leaves.

Question: How do I find the median from a stem-and-leaf plot?

Answer: Finding the median from a stem-and-leaf plot is straightforward:

  1. Count total values: Count all the leaves in the plot
  2. Find middle position: If n is the total count, the median is at position (n+1)/2
  3. Locate the value: Count through the ordered leaves to find the one at the middle position

Example: If there are 15 values, the median is at position (15+1)/2 = 8th value. Count the 8th leaf when reading the plot from top to bottom, left to right within each stem.

For even numbers of values, average the two middle values. If there are 10 values, average the 5th and 6th values.

The stem-and-leaf plot makes this process easier because the leaves are already ordered within each stem.

Question: What's the difference between a stem-and-leaf plot and a histogram?

Answer: The main differences are:

  • Stem-and-leaf plot: Preserves individual data values, shows exact numbers, good for small to medium datasets
  • Histogram: Groups data into bins, shows frequency distribution, works well for large datasets

Advantages of stem-and-leaf plots:

  • Shows exact data values
  • Preserves original data
  • Easy to construct by hand
  • Good for identifying outliers

Advantages of histograms:

  • Works better with large datasets
  • Smaller visual footprint
  • Better for continuous data
  • Smoothing effect on data

Both show distribution shape, but stem-and-leaf plots retain more information about individual values.

Question: How do I handle data with many repeated values in a stem-and-leaf plot?

Answer: Repeated values are handled naturally in stem-and-leaf plots - each occurrence gets its own leaf:

Example: If your data includes 72, 72, 72, 75, 75, the stem-and-leaf plot would show:
7 | 2 2 2 5 5

However, if a stem has too many leaves (making the plot hard to read), consider:

  • Splitting stems: Use 7L for 70-74 and 7H for 75-79
  • Changing the leaf assignment: Use tens as stems, units as leaves

Split stems example: For values 72, 72, 72, 75, 75, 77:
7L | 2 2 2
7H | 5 5 7

This maintains the visual representation while improving readability.

Question: Can stem-and-leaf plots show negative values or decimals?

Answer: Yes, stem-and-leaf plots can handle both negative values and decimals:

For negative values: Use the negative sign with the stem. Example: -23 would be represented as -2 | 3.

For decimals: Decide where to split. For values like 3.2, 3.7, 4.1, you could use:
3 | 2 7
4 | 1
Key: 3 | 2 = 3.2

For values with more decimal places (like 3.24, 3.78), you might use:
3.2 | 4
3.7 | 8
Key: 3.2 | 4 = 3.24

The key is consistency in how you assign stems and leaves, and always include a key to clarify the interpretation.