Z-score: The number of standard deviations a data point is from the mean: z = (x - μ)/σ.
Standardization: Converting raw scores to z-scores to make different normal distributions comparable.
- Identify mean (μ) and standard deviation (σ)
- Identify the raw score (x)
- Apply z-score formula: z = (x - μ)/σ
- Use standard normal table or empirical rule to find probability
μ = 70 inches (mean), σ = 3 inches (standard deviation), x = 76 inches (raw score)
z = (x - μ)/σ = (76 - 70)/3 = 6/3 = 2.0
A z-score of 2.0 means the height is 2 standard deviations above the mean.
Using the empirical rule: approximately 95% of data falls within 2 standard deviations of the mean.
This means 2.5% of data is above 2 standard deviations and 2.5% is below -2 standard deviations.
So P(Z ≤ 2.0) ≈ 95% + 2.5% = 97.5%
The z-score for a 76-inch tall male is 2.0.
Approximately 97.5% of men are shorter than 76 inches.
• Z-score Formula: z = (x - μ)/σ
• Empirical Rule: 95% within 2 SDs, 2.5% in each tail
• Standardization: Converts any normal distribution to standard normal
Percentile: The percentage of scores that fall below a given value.
Standard Normal Distribution: Normal distribution with mean 0 and standard deviation 1.
μ = 1000 (mean), σ = 200 (standard deviation), x = 1250 (student's score)
z = (x - μ)/σ = (1250 - 1000)/200 = 250/200 = 1.25
A z-score of 1.25 means the score is 1.25 standard deviations above the mean.
Using standard normal tables or calculator: P(Z ≤ 1.25) ≈ 0.8944 = 89.44%
So the student is at the 89th percentile.
P(Z > 1.25) = 1 - P(Z ≤ 1.25) = 1 - 0.8944 = 0.1056 = 10.56%
The z-score for a 1250 SAT score is 1.25.
This represents the 89.44th percentile.
About 10.56% of students scored higher.
• Z-score Formula: z = (x - μ)/σ
• Percentile: P(X ≤ x) expressed as percentage
• Complement Rule: P(X > x) = 1 - P(X ≤ x)
Normal Distribution: A continuous probability distribution with symmetric bell-shaped curve.
Standard Deviation Units: Converting raw scores to standard deviation units for comparison.
μ = 16 oz (mean), σ = 0.2 oz (standard deviation), x = 15.7 oz (observed weight)
z = (x - μ)/σ = (15.7 - 16)/0.2 = -0.3/0.2 = -1.5
A z-score of -1.5 means the weight is 1.5 standard deviations below the mean.
Using standard normal tables: P(Z ≤ -1.5) ≈ 0.0668 = 6.68%
Alternatively, by symmetry: P(Z ≤ -1.5) = P(Z ≥ 1.5) = 1 - P(Z ≤ 1.5) = 1 - 0.9332 = 0.0668
By empirical rule, about 68% of data falls within 1 standard deviation.
So about 34% falls between the mean and 1 standard deviation below the mean.
Since 50% falls below the mean, about 50% - 34% = 16% falls below μ - 1σ = 15.8 oz.
Our value of 6.68% is reasonable as it's between μ - 1σ and μ - 2σ.
The z-score for a 15.7 oz box is -1.5.
About 6.68% of boxes weigh less than 15.7 oz.
• Z-score Formula: z = (x - μ)/σ
• Standard Normal Table: Provides cumulative probabilities
• Normal Distribution Symmetry: P(Z ≤ -a) = P(Z ≥ a)
Z-score: The number of standard deviations a data point is from the mean of its distribution.
Standard Normal Distribution: A normal distribution with mean 0 and standard deviation 1.
Percentile: The percentage of data points that fall below a given value.
Standardization: The process of converting raw scores to z-scores to make different normal distributions comparable.
• Z-score: z = (x - μ)/σ
• Standard Normal: Z ~ N(0,1)
• Percentile: P(X ≤ x) = P(Z ≤ z)
• Symmetry: P(Z ≤ -a) = P(Z ≥ a)
Normal Distribution: A continuous probability distribution with symmetric bell-shaped curve.
Standard Deviation Units: Converting raw scores to standard deviation units for comparison.
μ = 85°F (mean), σ = 5°F (standard deviation), x = 92°F (observed temperature)
z = (x - μ)/σ = (92 - 85)/5 = 7/5 = 1.4
A z-score of 1.4 means the temperature is 1.4 standard deviations above the mean.
Using standard normal tables: P(Z ≤ 1.4) ≈ 0.9192 = 91.92%
This means there's a 91.92% probability that a randomly selected day has a temperature of 92°F or less.
P(Z > 1.4) = 1 - P(Z ≤ 1.4) = 1 - 0.9192 = 0.0808 = 8.08%
The z-score for a 92°F day is 1.4.
The probability that a randomly selected day has a temperature of 92°F or less is approximately 91.92%.
• Z-score Formula: z = (x - μ)/σ
• Standard Normal Table: Provides cumulative probabilities
• Complement Rule: P(X > x) = 1 - P(X ≤ x)
IQ Distribution: Standardized intelligence test scores with mean of 100 and SD of 15.
Percentile Rank: The percentage of scores that fall below a given value.
z = (x - μ)/σ = (130 - 100)/15 = 30/15 = 2.0
For x = 85: z = (85 - 100)/15 = -15/15 = -1.0
For x = 130: z = (130 - 100)/15 = 30/15 = 2.0
P(85 ≤ X ≤ 130) = P(-1.0 ≤ Z ≤ 2.0) = P(Z ≤ 2.0) - P(Z ≤ -1.0)
= 0.9772 - 0.1587 = 0.8185 = 81.85%
We need to find x such that P(X ≤ x) = 0.95
First, find z₀.₉₅ ≈ 1.645 (from standard normal table)
Then, solve for x: z = (x - μ)/σ → 1.645 = (x - 100)/15
x = 100 + 1.645 × 15 = 100 + 24.675 = 124.675 ≈ 125
For IQ = 130: z = 2.0, so P(X ≤ 130) ≈ 97.72%
For IQ = 85: z = -1.0, so P(X ≤ 85) ≈ 15.87%
Difference: 97.72% - 15.87% = 81.85% ✓
The z-score for an IQ of 130 is 2.0.
About 81.85% of people have IQs between 85 and 130.
An IQ of approximately 125 corresponds to the 95th percentile.
• Z-score Formula: z = (x - μ)/σ
• Interval Probability: P(a ≤ X ≤ b) = P(X ≤ b) - P(X ≤ a)
• Percentile Calculation: x = μ + z_p × σ
Complete Summary: Z-Scores and Normal Distribution Probabilities
Z-score: z = (x - μ)/σ, represents standard deviation units from the mean.
Standardization: Converting any normal distribution to standard normal (μ=0, σ=1).
Standard Normal: Z ~ N(0,1), used to find probabilities for any normal distribution.
Percentiles: Values that divide the distribution into 100 equal parts.
Positive Z: Above mean, negative Z: below mean, zero Z: at mean.
Same Scale: Z-scores allow comparison across different normal distributions.
Symmetry: P(Z ≤ -a) = P(Z ≥ a).
Area Under Curve: Represents probability.
Step 1: Identify μ (mean) and σ (standard deviation).
Step 2: Apply z-score formula: z = (x - μ)/σ.
Step 3: Use standard normal table or calculator for probabilities.
Step 4: Interpret results in context of the original problem.
Always Calculate Z: Convert raw scores to z-scores first.
Use Tables/Technology: For precise probabilities beyond empirical rule.
Draw Diagram: Visualize the problem to avoid errors.
Check Reasonableness: Verify results make sense.
Z-score: A standardized value that indicates how many standard deviations an element is from the mean of a distribution.
Standard Normal Distribution: A normal distribution with mean 0 and standard deviation 1, used as a reference for all normal distributions.
Standardization: The process of converting raw scores to z-scores to make different normal distributions comparable.
Percentile: The value below which a given percentage of observations in a group of observations fall.
Cumulative Probability: The probability that a random variable takes a value less than or equal to a specific value.
- Identify Parameters: Determine μ (mean) and σ (standard deviation).
- Convert to Z-score: Calculate z = (x - μ)/σ.
- Find Probability: Use standard normal table or calculator.
- Interpret Results: Express in context of the original problem.
- Verify Answer: Check if the result makes sense.
• Z-score Formula: z = (x - μ)/σ
• Standard Normal: Z ~ N(0,1)
• Interval Probability: P(a ≤ X ≤ b) = P(X ≤ b) - P(X ≤ a)
• Percentile Calculation: x = μ + z_p × σ
Questions & Answers
Question: Why do we need z-scores? Why can't we just work with the original values?
Answer: Z-scores serve several important purposes:
Standardization:
- Allow comparison across different normal distributions with different means and standard deviations
- Convert any normal distribution to the standard normal distribution (mean=0, SD=1)
Practical Benefits:
- Relative position: Understand how far a value is from the mean in standard deviation units
- Probability calculation: Use standard normal tables to find probabilities
- Comparison: Compare values from different distributions (e.g., SAT vs. ACT scores)
For example, a height of 76" in a distribution with μ=70" and σ=3" has the same relative position as a weight of 180 lbs in a distribution with μ=160 lbs and σ=13.33 lbs - both are 2 standard deviations above their respective means.
Question: In Exercise 5, how did you calculate P(85 ≤ X ≤ 130) = P(Z ≤ 2.0) - P(Z ≤ -1.0)? Why do we subtract?
Answer: This uses the fundamental principle for calculating interval probabilities:
Interval Probability Formula:
P(a ≤ X ≤ b) = P(X ≤ b) - P(X ≤ a)
This works because P(X ≤ b) includes ALL values up to b, while P(X ≤ a) includes ALL values up to a.
Subtracting P(X ≤ a) removes the portion below a, leaving only the portion between a and b.
Visual Representation:
Think of the area under the curve: P(X ≤ 130) is the area from negative infinity to 130, P(X ≤ 85) is the area from negative infinity to 85.
Subtracting these gives the area between 85 and 130.
This principle works for any distribution, not just normal distributions.
Question: What does a negative z-score mean? Can z-scores be very large?
Answer: Negative z-scores and large z-scores have specific meanings:
Negative Z-scores:
- Indicate values below the mean (x < μ)
- The magnitude indicates how many standard deviations below the mean
- For example, z = -1.5 means 1.5 standard deviations below the mean
Large Z-scores:
Yes, z-scores can theoretically be any real number:
- Small |z| (|z| < 1): Close to the mean
- Moderate |z| (1 ≤ |z| < 2): Somewhat far from the mean
- Large |z| (|z| ≥ 2): Far from the mean (unusual values)
- Very large |z| (|z| ≥ 3): Very unusual values
In practice, values with |z| > 3 are considered outliers in many contexts, as they occur in less than 0.3% of cases in a normal distribution.