Solved Exercises on Exponential Growth and Decay Models in Differential Equations

Master exponential models: population growth, radioactive decay, compound interest, and logistic applications through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Population growth model
Exercise 1
A bacterial culture starts with 100 bacteria and grows at a rate proportional to its size. After 2 hours, there are 400 bacteria. Find the population after 5 hours.
Definition:

Exponential growth model: When the rate of change of a quantity is proportional to the quantity itself, modeled by \(\frac{dP}{dt} = kP\) with solution \(P(t) = P_0e^{kt}\)

Exponential growth method:
  1. Set up the differential equation: \(\frac{dP}{dt} = kP\)
  2. Identify initial condition: \(P(0) = P_0\)
  3. Find the general solution: \(P(t) = P_0e^{kt}\)
  4. Use additional information to find the growth constant \(k\)
  5. Substitute to find the value at the desired time
Initial conditions
\(P_0 = 100\), \(P(2) = 400\)
Growth constant
\(k = \frac{\ln(4)}{2} \approx 0.693\)
Result
\(P(5) = 100e^{5k} \approx 3200\)
Step 1: Set up the differential equation

Since growth is proportional to population size: \(\frac{dP}{dt} = kP\)

Step 2: Find the general solution

The general solution to \(\frac{dP}{dt} = kP\) is \(P(t) = P_0e^{kt}\), where \(P_0\) is the initial population.

Step 3: Apply the initial condition

At \(t = 0\): \(P(0) = 100\), so \(P_0 = 100\)

Therefore: \(P(t) = 100e^{kt}\)

Step 4: Use the second condition to find \(k\)

At \(t = 2\): \(P(2) = 400\)

\(400 = 100e^{2k}\)

\(4 = e^{2k}\)

\(\ln(4) = 2k\)

\(k = \frac{\ln(4)}{2} = \frac{2\ln(2)}{2} = \ln(2)\)

Step 5: Find population after 5 hours

\(P(5) = 100e^{5\ln(2)} = 100e^{\ln(2^5)} = 100 \cdot 2^5 = 100 \cdot 32 = 3200\)

Step 6: Verification

Check: \(P(0) = 100e^{0} = 100\) ✓

\(P(2) = 100e^{2\ln(2)} = 100e^{\ln(4)} = 100 \cdot 4 = 400\) ✓

Population after 5 hours: 3200 bacteria
Final answer:

There will be 3200 bacteria after 5 hours.

Applied rules:

• Exponential growth: \(\frac{dP}{dt} = kP\) has solution \(P(t) = P_0e^{kt}\)

• Logarithmic properties: \(e^{\ln(a)} = a\), \(\ln(a^b) = b\ln(a)\)

• Proportionality: Rate of change proportional to current value

2 Radioactive decay model
Exercise 2
A sample of radioactive material has a half-life of 1620 years. If the initial amount is 10 grams, find the amount remaining after 5000 years.
Definition:

Radioactive decay: The amount of substance decreases exponentially according to \(\frac{dN}{dt} = -kN\), with solution \(N(t) = N_0e^{-kt}\). Half-life is the time for quantity to reduce to half its original value.

Original function
\(N(t) = N_0e^{-kt}\)
Half-life relation
\(k = \frac{\ln(2)}{t_{1/2}}\)
Result
\(N(5000) = 10e^{-5000k} \approx 1.13\) grams
Step 1: Set up the decay equation

For radioactive decay: \(\frac{dN}{dt} = -kN\), so \(N(t) = N_0e^{-kt}\)

Step 2: Find the decay constant using half-life

At half-life: \(N(t_{1/2}) = \frac{N_0}{2}\)

\(\frac{N_0}{2} = N_0e^{-kt_{1/2}}\)

\(\frac{1}{2} = e^{-kt_{1/2}}\)

\(\ln(\frac{1}{2}) = -kt_{1/2}\)

\(-\ln(2) = -kt_{1/2}\)

Therefore: \(k = \frac{\ln(2)}{t_{1/2}} = \frac{\ln(2)}{1620}\)

Step 3: Apply initial conditions

Initial amount: \(N_0 = 10\) grams

So: \(N(t) = 10e^{-\frac{\ln(2)}{1620}t}\)

Step 4: Calculate amount after 5000 years

\(N(5000) = 10e^{-\frac{\ln(2)}{1620} \cdot 5000} = 10e^{-\frac{5000\ln(2)}{1620}}\)

\(= 10e^{-\frac{5000 \cdot 0.693}{1620}} = 10e^{-\frac{3465}{1620}} = 10e^{-2.139}\)

\(= 10 \cdot 0.113 = 1.13\) grams

Step 5: Verification

Check half-life: \(N(1620) = 10e^{-\frac{\ln(2)}{1620} \cdot 1620} = 10e^{-\ln(2)} = 10 \cdot \frac{1}{2} = 5\) grams ✓

Amount remaining after 5000 years: 1.13 grams
Final answer:

After 5000 years, approximately 1.13 grams of the radioactive material remain.

Applied rules:

• Exponential decay: \(\frac{dN}{dt} = -kN\) has solution \(N(t) = N_0e^{-kt}\)

• Half-life formula: \(k = \frac{\ln(2)}{t_{1/2}}\)

• Logarithmic properties: \(\ln(\frac{1}{a}) = -\ln(a)\)

3 Compound interest model
Exercise 3
How long will it take for $1000 invested at 5% annual interest compounded continuously to grow to $2000?
Definition:

Continuous compound interest: Modeled by \(\frac{dA}{dt} = rA\) where \(r\) is the interest rate, with solution \(A(t) = A_0e^{rt}\)

Original function
\(A(t) = A_0e^{rt}\)
Given values
\(A_0 = 1000\), \(r = 0.05\), \(A(t) = 2000\)
Result
\(t = \frac{\ln(2)}{0.05} \approx 13.86\) years
Step 1: Set up the compound interest equation

For continuous compounding: \(\frac{dA}{dt} = rA\), so \(A(t) = A_0e^{rt}\)

Step 2: Identify the given values

Initial investment: \(A_0 = \$1000\)

Interest rate: \(r = 5\% = 0.05\)

Target amount: \(A(t) = \$2000\)

Step 3: Set up the equation to solve for \(t\)

\(2000 = 1000e^{0.05t}\)

Step 4: Solve for \(t\)

\(2 = e^{0.05t}\)

\(\ln(2) = 0.05t\)

\(t = \frac{\ln(2)}{0.05} = \frac{0.693}{0.05} = 13.86\) years

Step 5: Verification

\(A(13.86) = 1000e^{0.05 \cdot 13.86} = 1000e^{0.693} = 1000e^{\ln(2)} = 1000 \cdot 2 = 2000\) ✓

Step 6: Alternative approach using doubling time

For continuous growth, the doubling time is \(t_d = \frac{\ln(2)}{r}\)

So: \(t_d = \frac{\ln(2)}{0.05} = 13.86\) years

Time to double investment: 13.86 years
Final answer:

It will take approximately 13.86 years for the investment to double to $2000.

Applied rules:

• Continuous interest: \(A(t) = A_0e^{rt}\)

• Logarithmic properties: \(\ln(e^x) = x\)

• Exponential growth: Proportional to current value

Key Concepts: Exponential Models
\(\frac{dP}{dt} = kP\)
Exponential Model Differential Equation
Growth Solution
\(P(t) = P_0e^{kt}\)
When \(k > 0\)
Decay Solution
\(P(t) = P_0e^{-kt}\)
When \(k > 0\)
Half-Life
\(t_{1/2} = \frac{\ln(2)}{k}\)
Time to halve quantity
Doubling Time
\(t_d = \frac{\ln(2)}{k}\)
Time to double quantity
Compound Interest
\(A(t) = A_0e^{rt}\)
Continuous compounding
Newton's Law
\(T(t) = T_s + (T_0 - T_s)e^{-kt}\)
Cooling/warming law
Key definitions:

Exponential growth/decay: A process where the rate of change is proportional to the current amount, described by \(\frac{dP}{dt} = kP\)

Growth constant: The positive constant \(k\) in the exponential model that determines the rate of growth

Decay constant: The positive constant \(k\) in the exponential decay model that determines the rate of decay

Half-life: The time required for a quantity to reduce to half its initial value in an exponential decay process

Continuous compounding: Interest that is computed and added to the principal continuously, modeled by \(A(t) = A_0e^{rt}\)

Exponential model methodology:
  1. Identify the type: Determine if the problem describes growth (\(k > 0\)) or decay (\(k < 0\))
  2. Set up the equation: Write the differential equation \(\frac{dP}{dt} = kP\)
  3. Find the general solution: \(P(t) = P_0e^{kt}\) for growth, \(P(t) = P_0e^{-kt}\) for decay
  4. Apply initial conditions: Use given values to find constants
  5. Use additional information: Apply other given conditions to find unknown parameters
  6. Solve for the target: Calculate the desired quantity at the specified time
Tip 1: Always check that your growth constant has the correct sign based on the problem context.
Tip 2: Remember that half-life and doubling time both use the formula \(\frac{\ln(2)}{|k|}\).
Tip 3: Convert percentage rates to decimals before using in formulas (e.g., 5% = 0.05).
Tip 4: Verify your answer by substituting back into the original equation.
Common applications: Population growth, radioactive decay, compound interest, cooling processes, bacterial growth, drug concentration, atmospheric pressure.
Visualization: Exponential functions exhibit rapid growth or decay, approaching zero asymptotically in decay models.
Essential formulas to know by heart:

• Exponential growth: \(P(t) = P_0e^{kt}\) (where \(k > 0\))

• Exponential decay: \(P(t) = P_0e^{-kt}\) (where \(k > 0\))

• Half-life: \(t_{1/2} = \frac{\ln(2)}{k}\)

• Doubling time: \(t_d = \frac{\ln(2)}{k}\)

• Continuous compound interest: \(A(t) = A_0e^{rt}\)

• Newton's cooling: \(T(t) = T_s + (T_0 - T_s)e^{-kt}\)

• Logarithmic identity: \(e^{\ln(x)} = x\), \(\ln(e^x) = x\)

Visual Analysis: Exponential Model Patterns
Exercise 6: Model Comparison
Compare different exponential models:
\(P(t) = 100e^{0.1t}\) (growth)
\(N(t) = 100e^{-0.05t}\) (decay)
\(A(t) = 1000e^{0.03t}\) (investment)

Analysis: Comparing different exponential growth and decay patterns.

  • \(P(t) = 100e^{0.1t}\): Population doubles every 6.93 years (\(\frac{\ln(2)}{0.1}\))
  • \(N(t) = 100e^{-0.05t}\): Substance halves every 13.86 years (\(\frac{\ln(2)}{0.05}\))
  • \(A(t) = 1000e^{0.03t}\): Investment doubles every 23.1 years (\(\frac{\ln(2)}{0.03}\))
Solution: Exercises 4 to 5
4 Newton's law of cooling
Exercise 4
A cup of coffee at 90°C is placed in a room at 20°C. If the temperature drops to 70°C after 5 minutes, find the temperature after 15 minutes.
Definition:

Newton's law of cooling: The rate of temperature change is proportional to the difference between the object's temperature and the ambient temperature: \(\frac{dT}{dt} = -k(T - T_s)\) where \(T_s\) is the surrounding temperature.

Original equation
\(\frac{dT}{dt} = -k(T - T_s)\)
General solution
\(T(t) = T_s + (T_0 - T_s)e^{-kt}\)
Result
\(T(15) = 20 + 70e^{-15k} \approx 42.2°C\)
Step 1: Set up Newton's law of cooling

The differential equation is: \(\frac{dT}{dt} = -k(T - T_s)\)

Where \(T_s = 20°C\) (surrounding temperature)

Step 2: Find the general solution

The solution to \(\frac{dT}{dt} = -k(T - T_s)\) is: \(T(t) = T_s + (T_0 - T_s)e^{-kt}\)

Where \(T_0\) is the initial temperature.

Step 3: Apply initial conditions

Initial temperature: \(T_0 = 90°C\)

Surrounding temperature: \(T_s = 20°C\)

So: \(T(t) = 20 + (90 - 20)e^{-kt} = 20 + 70e^{-kt}\)

Step 4: Use the condition at \(t = 5\) minutes

At \(t = 5\): \(T(5) = 70°C\)

\(70 = 20 + 70e^{-5k}\)

\(50 = 70e^{-5k}\)

\(\frac{50}{70} = e^{-5k}\)

\(\frac{5}{7} = e^{-5k}\)

\(\ln(\frac{5}{7}) = -5k\)

\(k = -\frac{1}{5}\ln(\frac{5}{7}) = \frac{1}{5}\ln(\frac{7}{5})\)

Step 5: Calculate temperature after 15 minutes

\(T(15) = 20 + 70e^{-15k} = 20 + 70e^{-15 \cdot \frac{1}{5}\ln(\frac{7}{5})} = 20 + 70e^{-3\ln(\frac{7}{5})}\)

\(= 20 + 70e^{\ln((\frac{7}{5})^{-3})} = 20 + 70(\frac{7}{5})^{-3} = 20 + 70 \cdot \frac{5^3}{7^3}\)

\(= 20 + 70 \cdot \frac{125}{343} = 20 + \frac{8750}{343} \approx 20 + 25.5 = 45.5°C\)

Temperature after 15 minutes: approximately 45.5°C
Final answer:

The temperature of the coffee after 15 minutes will be approximately 45.5°C.

Applied rules:

• Newton's law: \(\frac{dT}{dt} = -k(T - T_s)\)

• General solution: \(T(t) = T_s + (T_0 - T_s)e^{-kt}\)

• Logarithmic properties: \(\ln(\frac{a}{b}) = \ln(a) - \ln(b)\)

• Exponential property: \(e^{\ln(x)} = x\)

5 Drug concentration model
Exercise 5
A drug is administered intravenously with an initial concentration of 5 mg/L. If the concentration decreases at a rate proportional to the current concentration with a decay constant of 0.2 per hour, find the time when the concentration falls to 1 mg/L.
Definition:

Drug elimination model: Concentration decreases according to \(\frac{dC}{dt} = -kC\) where \(k\) is the elimination constant, with solution \(C(t) = C_0e^{-kt}\)

Original function
\(C(t) = C_0e^{-kt}\)
Given values
\(C_0 = 5\), \(k = 0.2\), \(C(t) = 1\)
Result
\(t = \frac{\ln(5)}{0.2} \approx 8.05\) hours
Step 1: Set up the drug elimination equation

For drug elimination: \(\frac{dC}{dt} = -kC\), so \(C(t) = C_0e^{-kt}\)

Step 2: Identify the given values

Initial concentration: \(C_0 = 5\) mg/L

Decay constant: \(k = 0.2\) per hour

Target concentration: \(C(t) = 1\) mg/L

Step 3: Set up the equation to solve for \(t\)

\(1 = 5e^{-0.2t}\)

Step 4: Solve for \(t\)

\(\frac{1}{5} = e^{-0.2t}\)

\(\ln(\frac{1}{5}) = -0.2t\)

\(-\ln(5) = -0.2t\)

\(t = \frac{\ln(5)}{0.2} = \frac{1.609}{0.2} = 8.05\) hours

Step 5: Verification

\(C(8.05) = 5e^{-0.2 \cdot 8.05} = 5e^{-1.609} = 5e^{-\ln(5)} = 5 \cdot \frac{1}{5} = 1\) mg/L ✓

Time to reach 1 mg/L: 8.05 hours
Final answer:

The drug concentration will fall to 1 mg/L after approximately 8.05 hours.

Applied rules:

• Drug elimination: \(\frac{dC}{dt} = -kC\) has solution \(C(t) = C_0e^{-kt}\)

• Logarithmic properties: \(\ln(\frac{1}{a}) = -\ln(a)\)

• Exponential property: \(e^{-\ln(a)} = \frac{1}{a}\)

Comprehensive Summary: Exponential Models
\(\frac{dP}{dt} = kP\)
Exponential Model Differential Equation
Key definitions:

Exponential growth/decay: A mathematical model where the rate of change of a quantity is proportional to the quantity itself, described by \(\frac{dP}{dt} = kP\)

Growth constant: The proportionality constant \(k > 0\) in exponential growth models

Decay constant: The proportionality constant \(k > 0\) in exponential decay models (with \(\frac{dP}{dt} = -kP\))

Half-life: The time required for a quantity to reduce to half its initial value in an exponential decay process

Continuous compounding: Interest that is computed and added to the principal continuously, modeled by \(A(t) = A_0e^{rt}\)

Complete exponential modeling methodology:
  1. Identify the model: Determine if the situation describes growth or decay
  2. Set up the differential equation: \(\frac{dP}{dt} = kP\) (growth) or \(\frac{dP}{dt} = -kP\) (decay)
  3. Find the general solution: \(P(t) = P_0e^{kt}\) or \(P(t) = P_0e^{-kt}\)
  4. Apply initial conditions: Use given values to determine constants
  5. Use additional conditions: Apply other known values to find unknown parameters
  6. Solve for the target: Calculate the desired quantity at the specified time
Tip 1: Always verify that your growth/decay constant has the correct sign based on the problem context.
Tip 2: Remember that half-life and doubling time both use the formula \(\frac{\ln(2)}{|k|}\).
Tip 3: Convert percentage rates to decimals before using in formulas (e.g., 5% = 0.05).
Tip 4: Always verify your answer by substituting back into the original equation.
Common applications: Population growth, radioactive decay, compound interest, cooling processes, bacterial growth, drug concentration, atmospheric pressure, carbon dating.
Visualization: Exponential functions exhibit rapid growth or decay, approaching zero asymptotically in decay models and growing without bound in growth models.
Essential formulas to know by heart:

• Exponential growth: \(P(t) = P_0e^{kt}\) (where \(k > 0\))

• Exponential decay: \(P(t) = P_0e^{-kt}\) (where \(k > 0\))

• Half-life: \(t_{1/2} = \frac{\ln(2)}{k}\)

• Doubling time: \(t_d = \frac{\ln(2)}{k}\)

• Continuous compound interest: \(A(t) = A_0e^{rt}\)

• Newton's cooling: \(T(t) = T_s + (T_0 - T_s)e^{-kt}\)

• Logarithmic identity: \(e^{\ln(x)} = x\), \(\ln(e^x) = x\)

Advanced Exponential Applications
Exercise 7: Complex Exponential Scenarios
Explore advanced exponential applications:
\(P(t) = P_0e^{kt} + C\) (growth with baseline)
\(N(t) = N_0e^{-kt} + N_\infty\) (decay approaching equilibrium)
\(A(t) = A_0(1 - e^{-rt})\) (saturation model)

Analysis: Advanced exponential model applications.

  • \(P(t) = P_0e^{kt} + C\): Represents growth toward a baseline offset
  • \(N(t) = N_0e^{-kt} + N_\infty\): Models decay approaching an equilibrium value
  • \(A(t) = A_0(1 - e^{-rt})\): Describes saturation processes in chemistry and biology

Questions & Answers

Question: How do I determine whether to use \(P(t) = P_0e^{kt}\) or \(P(t) = P_0e^{-kt}\) for a given problem?

Answer: The key is in the differential equation:

For growth: \(\frac{dP}{dt} = kP\) (rate is positive multiple of quantity) → \(P(t) = P_0e^{kt}\) (where \(k > 0\))

For decay: \(\frac{dP}{dt} = -kP\) (rate is negative multiple of quantity) → \(P(t) = P_0e^{-kt}\) (where \(k > 0\))

Alternatively, you can always use \(P(t) = P_0e^{kt}\) and let \(k\) be positive (growth) or negative (decay).

Context clues: "increases," "grows," "multiplies" → growth (\(k > 0\)); "decreases," "decays," "diminishes," "halves" → decay (\(k < 0\)).

Question: Why is the natural logarithm always used in exponential model problems?

Answer: The natural logarithm arises naturally from the differential equation:

When solving \(\frac{dP}{dt} = kP\), we separate variables: \(\frac{dP}{P} = k dt\)

Integrating both sides: \(\int \frac{1}{P} dP = \int k dt\)

This gives: \(\ln|P| = kt + C\), so \(P = e^{kt+C} = e^C e^{kt} = P_0 e^{kt}\)

The natural logarithm is the inverse of the natural exponential function, making it the natural choice for problems involving \(e^x\).

Using \(\ln\) also simplifies the derivative relationships: \(\frac{d}{dx}[e^x] = e^x\) and \(\frac{d}{dx}[\ln x] = \frac{1}{x}\).

Question: How can I remember the different formulas for half-life and doubling time?

Answer: They're the same formula! Both involve reducing or increasing to half or double the original amount:

For any exponential model: \(P(t) = P_0e^{\pm kt}\)

For half-life: Set \(P(t) = \frac{P_0}{2}\): \(\frac{P_0}{2} = P_0e^{-kt_{1/2}}\) → \(t_{1/2} = \frac{\ln(2)}{k}\)

For doubling time: Set \(P(t) = 2P_0\): \(2P_0 = P_0e^{kt_d}\) → \(t_d = \frac{\ln(2)}{k}\)

Just remember: Time for significant change = \(\frac{\ln(2)}{|k|}\).

The magnitude of change is the same (factor of 2), so the time formula is identical.

Question: How are these exponential models used in business and economics?

Answer: Exponential models are fundamental in business applications:

Continuous compound interest: \(A(t) = A_0e^{rt}\) for financial calculations

Population growth: Modeling market size, customer base growth

Depreciation: Exponential decay models for asset value decline

Learning curves: Exponential decay in error rates over time

Network effects: Exponential growth in platform value with user adoption

These models provide the mathematical foundation for growth projections and decay estimates in business planning.

Question: How do these models apply to physics problems?

Answer: Exponential models are ubiquitous in physics:

Radioactive decay: \(N(t) = N_0e^{-\lambda t}\) where \(\lambda\) is the decay constant

Newton's law of cooling: \(T(t) = T_s + (T_0 - T_s)e^{-kt}\)

RC circuits: Charge decay: \(Q(t) = Q_0e^{-t/RC}\)

Atmospheric pressure: Decreases exponentially with altitude

Population dynamics: Exponential growth/decay in biological systems

These models describe natural phenomena where rates of change are proportional to current values.