Solved Exercises on Reasoning using Slope Fields

Master reasoning with slope fields: analysis, prediction, and interpretation of differential equations through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Equilibrium analysis
Exercise 1
Given the slope field for \(\frac{dy}{dx} = y(2-y)\), identify equilibrium solutions and determine their stability. Predict the long-term behavior of solutions with initial conditions \(y(0) = 0.5\), \(y(0) = 1.5\), and \(y(0) = 3\).
Definition:

Equilibrium solution: A constant solution where \(\frac{dy}{dx} = 0\). Stable equilibrium: Nearby solutions approach the equilibrium as \(x \to \infty\). Unstable equilibrium: Nearby solutions diverge from the equilibrium.

Analysis method:
  1. Find equilibrium points by setting \(\frac{dy}{dx} = 0\)
  2. Analyze the sign of \(\frac{dy}{dx}\) in intervals between equilibria
  3. Determine stability by examining direction of flow near equilibria
  4. Predict behavior based on initial conditions and flow patterns
Differential equation
\(\frac{dy}{dx} = y(2-y)\)
Equilibrium points
y = 0 and y = 2
Stability analysis
y = 0: unstable, y = 2: stable
Step 1: Find equilibrium solutions

\(\frac{dy}{dx} = y(2-y) = 0\)

This occurs when \(y = 0\) or \(2-y = 0\), so \(y = 0\) and \(y = 2\)

Step 2: Analyze sign of derivative in each region

For \(y < 0\): \(y < 0\) and \(2-y > 0\), so \(\frac{dy}{dx} = y(2-y) < 0\) (decreasing)

For \(0 < y < 2\): \(y > 0\) and \(2-y > 0\), so \(\frac{dy}{dx} = y(2-y) > 0\) (increasing)

For \(y > 2\): \(y > 0\) and \(2-y < 0\), so \(\frac{dy}{dx} = y(2-y) < 0\) (decreasing)

Step 3: Determine stability of equilibria

At \(y = 0\): Solutions below it decrease away, solutions above it increase toward it

Actually, let's reconsider: if \(y\) is slightly above 0, \(\frac{dy}{dx} > 0\), so solutions move away from 0

At \(y = 0\): Solutions near it move away → Unstable equilibrium

At \(y = 2\): Solutions below it increase toward it, solutions above it decrease toward it → Stable equilibrium

Step 4: Predict behavior for given initial conditions

For \(y(0) = 0.5\): Since \(0 < 0.5 < 2\), \(\frac{dy}{dx} > 0\), so solution increases toward \(y = 2\)

For \(y(0) = 1.5\): Since \(0 < 1.5 < 2\), \(\frac{dy}{dx} > 0\), so solution increases toward \(y = 2\)

For \(y(0) = 3\): Since \(3 > 2\), \(\frac{dy}{dx} < 0\), so solution decreases toward \(y = 2\)

Step 5: Conclusion

All solutions with \(y(0) > 0\) approach \(y = 2\) as \(x \to \infty\)

Solutions with \(y(0) < 0\) decrease without bound

y = 0: unstable, y = 2: stable; all positive solutions → 2
Final answer:

Equilibrium solutions: \(y = 0\) (unstable) and \(y = 2\) (stable). For \(y(0) = 0.5\), \(y(0) = 1.5\), and \(y(0) = 3\), all solutions approach \(y = 2\) as \(x \to \infty\).

Applied rules:

• Equilibrium identification: Set \(\frac{dy}{dx} = 0\)

• Stability analysis: Examine direction of flow near equilibria

• Behavior prediction: Use sign analysis of derivative

Tip: Solutions cannot cross equilibrium solutions due to uniqueness of solutions.
Caution: Always verify stability by checking flow direction on both sides of equilibria.
2 Stability comparison
Exercise 2
Compare the stability of equilibria for \(\frac{dy}{dx} = y^2 - 4\) and \(\frac{dy}{dx} = -(y^2 - 4)\). Explain why the direction of flow changes between the two equations.
Definition:

Stability reversal: When the sign of a differential equation is changed, the direction of flow is reversed, which can change the stability of equilibria.

Equation 1
\(\frac{dy}{dx} = y^2 - 4\)
Equation 2
\(\frac{dy}{dx} = -(y^2 - 4)\)
Same equilibria
y = -2 and y = 2
Step 1: Find equilibria for both equations

For \(\frac{dy}{dx} = y^2 - 4 = 0\): \(y^2 = 4\), so \(y = \pm 2\)

For \(\frac{dy}{dx} = -(y^2 - 4) = 0\): \(y^2 = 4\), so \(y = \pm 2\)

Both equations have the same equilibrium points: \(y = -2\) and \(y = 2\)

Step 2: Analyze stability for \(\frac{dy}{dx} = y^2 - 4\)

Factor: \(y^2 - 4 = (y-2)(y+2)\)

For \(y < -2\): \((y-2) < 0\) and \((y+2) < 0\), so \((y-2)(y+2) > 0\) → increasing

For \(-2 < y < 2\): \((y-2) < 0\) and \((y+2) > 0\), so \((y-2)(y+2) < 0\) → decreasing

For \(y > 2\): \((y-2) > 0\) and \((y+2) > 0\), so \((y-2)(y+2) > 0\) → increasing

At \(y = -2\): unstable (flow moves away on both sides)

At \(y = 2\): unstable (flow moves away on both sides)

Step 3: Analyze stability for \(\frac{dy}{dx} = -(y^2 - 4)\)

\(\frac{dy}{dx} = -(y-2)(y+2)\)

For \(y < -2\): \(-(y-2)(y+2) < 0\) → decreasing

For \(-2 < y < 2\): \(-(y-2)(y+2) > 0\) → increasing

For \(y > 2\): \(-(y-2)(y+2) < 0\) → decreasing

At \(y = -2\): stable (flow moves toward from both sides)

At \(y = 2\): stable (flow moves toward from both sides)

Step 4: Compare the results

Equation 1: Both equilibria are unstable

Equation 2: Both equilibria are stable

The sign change reverses the direction of flow

Step 5: Explain the phenomenon

Changing the sign of the differential equation reverses the direction of all slope segments

This reverses the flow direction, which can change stability properties

In this case, both equilibria switch from unstable to stable

Sign change reverses flow direction and stability
Final answer:

For \(\frac{dy}{dx} = y^2 - 4\): \(y = -2\) and \(y = 2\) are both unstable. For \(\frac{dy}{dx} = -(y^2 - 4)\): \(y = -2\) and \(y = 2\) are both stable. The sign change reverses the direction of flow in the slope field.

Applied rules:

• Sign change effect: Changing sign reverses flow direction

• Stability reversal: May change unstable to stable equilibria

• Equilibrium preservation: Same equilibria despite sign change

Tip: When comparing similar equations, focus on how sign changes affect the flow direction.
Pattern: Multiplying by -1 reverses all stability properties.
3 Critical threshold analysis
Exercise 3
For the differential equation \(\frac{dy}{dx} = y(1-y)(y-3)\), identify all equilibrium solutions and determine their stability. Find the critical threshold value that separates solutions that approach different stable equilibria.
Definition:

Critical threshold: An initial value that separates solutions approaching different stable equilibria. Bistability: When a system has two stable equilibria separated by an unstable equilibrium.

Differential equation
\(\frac{dy}{dx} = y(1-y)(y-3)\)
Equilibrium points
y = 0, y = 1, y = 3
Critical threshold
y ≈ 1 (separates basins)
Step 1: Find equilibrium solutions

\(\frac{dy}{dx} = y(1-y)(y-3) = 0\)

This occurs when \(y = 0\), \(1-y = 0\) (so \(y = 1\)), or \(y-3 = 0\) (so \(y = 3\))

Equilibrium solutions: \(y = 0\), \(y = 1\), and \(y = 3\)

Step 2: Analyze sign of derivative in each interval

Test points in each region:

For \(y < 0\): \(y < 0\), \((1-y) > 0\), \((y-3) < 0\) → \(\frac{dy}{dx} = (-)(+)(−) = +\) (increasing)

For \(0 < y < 1\): \(y > 0\), \((1-y) > 0\), \((y-3) < 0\) → \(\frac{dy}{dx} = (+)(+)(−) = -\) (decreasing)

For \(1 < y < 3\): \(y > 0\), \((1-y) < 0\), \((y-3) < 0\) → \(\frac{dy}{dx} = (+)(−)(−) = +\) (increasing)

For \(y > 3\): \(y > 0\), \((1-y) < 0\), \((y-3) > 0\) → \(\frac{dy}{dx} = (+)(−)(+) = -\) (decreasing)

Step 3: Determine stability of each equilibrium

At \(y = 0\): Left side (y < 0) → increasing (→ 0), Right side (0 < y < 1) → decreasing (→ 0)

Therefore, \(y = 0\) is stable

At \(y = 1\): Left side (0 < y < 1) → decreasing (away from 1), Right side (1 < y < 3) → increasing (away from 1)

Therefore, \(y = 1\) is unstable

At \(y = 3\): Left side (1 < y < 3) → increasing (→ 3), Right side (y > 3) → decreasing (→ 3)

Therefore, \(y = 3\) is stable

Step 4: Identify the critical threshold

This is a bistable system with stable equilibria at \(y = 0\) and \(y = 3\), separated by unstable equilibrium at \(y = 1\)

Solutions with initial values in \((0, 1)\) approach \(y = 0\)

Solutions with initial values in \((1, 3)\) approach \(y = 3\)

The critical threshold is the unstable equilibrium \(y = 1\)

Step 5: Summarize the behavior

For \(y(0) < 0\): Solution increases toward 0

For \(0 < y(0) < 1\): Solution decreases toward 0

For \(1 < y(0) < 3\): Solution increases toward 3

For \(y(0) > 3\): Solution decreases toward 3

Stable: y = 0, y = 3; Unstable: y = 1; Threshold: y = 1
Final answer:

Equilibrium solutions: \(y = 0\) (stable), \(y = 1\) (unstable), \(y = 3\) (stable). The critical threshold is \(y = 1\), which separates solutions that approach \(y = 0\) from those that approach \(y = 3\).

Applied rules:

• Sign analysis: Test derivative sign in intervals between equilibria

• Stability determination: Check flow direction near equilibria

• Threshold identification: Unstable equilibria often serve as thresholds

Tip: In bistable systems, the unstable equilibrium serves as a critical threshold.
Caution: Small changes in initial conditions near thresholds can lead to dramatically different outcomes.
Reasoning with Slope Fields: Complete Guide
\(\frac{dy}{dx} = f(x,y)\)
Differential Equation for Analysis
Equilibrium Condition
\(f(x,y) = 0\)
Where slope segments are horizontal
Stability Test
\(\frac{\partial f}{\partial y} < 0\)
Indicates stable equilibrium
Flow Direction
\(\text{sign}(\frac{dy}{dx})\)
Determines solution direction
Key definitions:

Equilibrium solution: A constant solution where \(\frac{dy}{dx} = 0\). Appears as horizontal line segments in the slope field.

Stable equilibrium: An equilibrium where nearby solutions approach it as the independent variable increases.

Unstable equilibrium: An equilibrium where nearby solutions move away from it as the independent variable increases.

Semistable equilibrium: An equilibrium where solutions approach it from one side and move away from the other.

Critical threshold: An initial value that separates solutions approaching different stable equilibria.

Basin of attraction: The set of initial conditions leading to a particular equilibrium.

Reasoning methodology:
  1. Identify equilibria: Solve \(f(x,y) = 0\) to find equilibrium points
  2. Analyze local behavior: Examine the sign of \(f(x,y)\) near equilibria
  3. Determine stability: Assess whether nearby solutions approach or diverge from equilibria
  4. Map solution regions: Identify which initial conditions lead to which equilibria
  5. Predict long-term behavior: Use stability information to predict solution trends
  6. Identify critical thresholds: Locate boundaries between different basins of attraction
Tip 1: Solutions cannot cross equilibrium solutions due to uniqueness properties.
Tip 2: The direction of flow is determined by the sign of the derivative.
Tip 3: Look for patterns and symmetries in the slope field to understand global behavior.
Tip 4: Critical thresholds often correspond to unstable equilibria in bistable systems.
Common errors: Misidentifying stability, ignoring uniqueness properties, overlooking critical thresholds.
Applications: Population dynamics, chemical reactions, economic models, control systems.
Essential principles:

• Equilibrium identification: Solve \(f(x,y) = 0\) for equilibrium points

• Stability criterion: \(\frac{\partial f}{\partial y} < 0\) indicates stability

• Flow direction: Positive derivative → increasing, negative → decreasing

• Uniqueness: Solutions cannot intersect or cross equilibrium points

• Global behavior: Long-term trends depend on initial conditions and stability

Solution: Exercises 4 to 5
4 Oscillation detection
Exercise 4
Analyze the slope field for \(\frac{dy}{dx} = \cos(y)\) and determine whether solutions exhibit oscillatory behavior. Describe the pattern of equilibria and their stability.
Definition:

Periodic equilibria: When equilibria occur at regular intervals, as in trigonometric differential equations. Oscillatory behavior: Solutions that alternate between increasing and decreasing.

Differential equation
\(\frac{dy}{dx} = \cos(y)\)
Equilibrium points
\(y = \frac{\pi}{2} + n\pi\)
Alternating stability
Stable/unstable alternating
Step 1: Find equilibrium solutions

\(\frac{dy}{dx} = \cos(y) = 0\)

This occurs when \(y = \frac{\pi}{2} + n\pi\) for integer \(n\)

Specific equilibria: ..., \(-\frac{3\pi}{2}\), \(-\frac{\pi}{2}\), \(\frac{\pi}{2}\), \(\frac{3\pi}{2}\), ...

Step 2: Analyze the sign of \(\cos(y)\) in intervals

Between consecutive equilibria, \(\cos(y)\) maintains a constant sign

For \(y \in (-\frac{\pi}{2}, \frac{\pi}{2})\): \(\cos(y) > 0\) → increasing

For \(y \in (\frac{\pi}{2}, \frac{3\pi}{2})\): \(\cos(y) < 0\) → decreasing

For \(y \in (\frac{3\pi}{2}, \frac{5\pi}{2})\): \(\cos(y) > 0\) → increasing

Pattern continues periodically

Step 3: Determine stability of each equilibrium

At \(y = \frac{\pi}{2} + 2n\pi\) (cosine changes from positive to negative):

Solution increases below, decreases above → Stable equilibrium

At \(y = -\frac{\pi}{2} + 2n\pi\) (cosine changes from negative to positive):

Solution decreases below, increases above → Unstable equilibrium

Step 4: Analyze oscillatory behavior

Solutions don't oscillate in the traditional sense (periodic up/down)

Instead, they are attracted to stable equilibria at \(y = \frac{\pi}{2} + 2n\pi\)

Solutions between stable equilibria approach the nearest stable equilibrium

No sustained oscillation occurs

Step 5: Describe the solution pattern

For \(y(0) \in (-\frac{\pi}{2}, \frac{\pi}{2})\): approaches \(y = \frac{\pi}{2}\)

For \(y(0) \in (\frac{\pi}{2}, \frac{3\pi}{2})\): approaches \(y = \frac{3\pi}{2}\)

For \(y(0) \in (\frac{3\pi}{2}, \frac{5\pi}{2})\): approaches \(y = \frac{5\pi}{2}\)

And so on...

Periodic equilibria with alternating stability
Final answer:

Equilibrium solutions occur at \(y = \frac{\pi}{2} + n\pi\). Stable equilibria at \(y = \frac{\pi}{2} + 2n\pi\), unstable at \(y = -\frac{\pi}{2} + 2n\pi\). Solutions do not oscillate but approach the nearest stable equilibrium.

Applied rules:

• Trigonometric zeros: \(\cos(y) = 0\) at \(y = \frac{\pi}{2} + n\pi\)

• Periodic behavior: Patterns repeat every \(2\pi\) for cosine

• Alternating stability: Consecutive equilibria have opposite stability

Tip: For periodic functions, expect periodic patterns in equilibria and behavior.
Caution: Not all periodic functions lead to oscillatory solutions.
5 Bifurcation analysis
Exercise 5
Consider the family of differential equations \(\frac{dy}{dx} = y^2 - c\) for different values of parameter \(c\). Analyze how the number and stability of equilibria change as \(c\) varies. Identify bifurcation points.
Definition:

Bifurcation: A qualitative change in the structure of solutions as a parameter varies. Bifurcation point: A parameter value where the number or stability of equilibria changes.

Parameterized equation
\(\frac{dy}{dx} = y^2 - c\)
Bifurcation point
c = 0
Structural change
0, 1, or 2 equilibria
Step 1: Find equilibria as function of parameter c

\(\frac{dy}{dx} = y^2 - c = 0\)

\(y^2 = c\)

For \(c < 0\): No real solutions → No equilibria

For \(c = 0\): \(y = 0\) → One equilibrium

For \(c > 0\): \(y = \pm\sqrt{c}\) → Two equilibria

Step 2: Analyze case c < 0

Since \(y^2 - c > 0\) for all \(y\) (because \(c < 0\)), \(\frac{dy}{dx} > 0\)

All solutions are monotonically increasing

No equilibrium solutions exist

Solutions increase without bound as \(x \to \infty\)

Step 3: Analyze case c = 0

\(\frac{dy}{dx} = y^2\)

One equilibrium at \(y = 0\)

For \(y \neq 0\): \(y^2 > 0\), so \(\frac{dy}{dx} > 0\)

Solutions increase away from \(y = 0\), so \(y = 0\) is unstable

Step 4: Analyze case c > 0

Two equilibria: \(y = -\sqrt{c}\) and \(y = \sqrt{c}\)

Factor: \(y^2 - c = (y-\sqrt{c})(y+\sqrt{c})\)

For \(y < -\sqrt{c}\): \((y-\sqrt{c}) < 0\), \((y+\sqrt{c}) < 0\) → \(\frac{dy}{dx} > 0\) (increasing)

For \(-\sqrt{c} < y < \sqrt{c}\): \((y-\sqrt{c}) < 0\), \((y+\sqrt{c}) > 0\) → \(\frac{dy}{dx} < 0\) (decreasing)

For \(y > \sqrt{c}\): \((y-\sqrt{c}) > 0\), \((y+\sqrt{c}) > 0\) → \(\frac{dy}{dx} > 0\) (increasing)

Step 5: Determine stability for c > 0

At \(y = -\sqrt{c}\): Left side → increasing (→ equilibrium), Right side → decreasing (→ equilibrium)

Therefore, \(y = -\sqrt{c}\) is stable

At \(y = \sqrt{c}\): Left side → decreasing (away from equilibrium), Right side → increasing (away from equilibrium)

Therefore, \(y = \sqrt{c}\) is unstable

Step 6: Identify bifurcation point

At \(c = 0\), the number of equilibria changes from 0 to 1

This is a saddle-node bifurcation

For \(c > 0\), this single equilibrium splits into two equilibria with different stabilities

Bifurcation at c = 0: saddle-node
Final answer:

For \(c < 0\): No equilibria, solutions increase without bound. For \(c = 0\): One unstable equilibrium at \(y = 0\). For \(c > 0\): Two equilibria at \(y = \pm\sqrt{c}\), with \(y = -\sqrt{c}\) stable and \(y = \sqrt{c}\) unstable. Bifurcation occurs at \(c = 0\).

Applied rules:

• Bifurcation analysis: Study how solutions change with parameters

• Structural stability: Changes in number or stability of equilibria

• Saddle-node bifurcation: Creation/destruction of equilibrium pairs

Tip: Parameterized equations often exhibit interesting bifurcation behavior.
Caution: Small parameter changes can lead to dramatic structural changes in behavior.
Comprehensive Summary: Reasoning using Slope Fields
\(\frac{dy}{dx} = f(x,y)\)
General Form for Analysis
Key definitions:

Equilibrium solution: A constant solution where \(\frac{dy}{dx} = 0\). Appears as horizontal line segments in the slope field.

Stable equilibrium: An equilibrium where nearby solutions approach it as the independent variable increases. Solutions converge to this point.

Unstable equilibrium: An equilibrium where nearby solutions move away from it as the independent variable increases. Solutions diverge from this point.

Semistable equilibrium: An equilibrium where solutions approach it from one side and move away from the other side.

Critical threshold: An initial value that separates solutions approaching different stable equilibria. Often corresponds to an unstable equilibrium.

Basin of attraction: The set of all initial conditions that lead to solutions approaching a particular stable equilibrium.

Bifurcation: A qualitative change in the structure of solutions as a parameter in the differential equation varies.

Comprehensive analysis approach:
  1. Equilibrium identification: Solve \(f(x,y) = 0\) to locate all equilibrium points
  2. Local stability analysis: Examine the sign of the derivative near each equilibrium
  3. Global flow mapping: Determine how solutions behave in each region between equilibria
  4. Stability classification: Categorize each equilibrium as stable, unstable, or semistable
  5. Basin determination: Identify which initial conditions lead to which equilibria
  6. Threshold identification: Locate critical values that separate different behaviors
  7. Long-term prediction: Use stability and basin information to predict solution behavior
  8. Parameter variation: Analyze how behavior changes with parameters (bifurcations)
Tip 1: Always start by finding where \(\frac{dy}{dx} = 0\) to identify equilibrium solutions.
Tip 2: Use the sign of the derivative to determine solution direction (increasing/decreasing).
Tip 3: Solutions cannot cross equilibrium solutions due to the uniqueness theorem.
Tip 4: Unstable equilibria often serve as critical thresholds between different basins of attraction.
Tip 5: For parameterized equations, identify values where the number or stability of equilibria changes.
Common errors: Misidentifying stability by not checking both sides of equilibria, ignoring uniqueness properties, overlooking bifurcation points.
Applications: Population dynamics (logistic growth, harvesting), chemical kinetics, economic models, control theory, and stability analysis of physical systems.
Essential principles:

• Equilibrium identification: Solve \(f(x,y) = 0\) to find equilibrium points

• Stability criterion: \(\frac{\partial f}{\partial y} < 0\) indicates local stability

• Flow direction: Positive derivative → solution increases, negative → solution decreases

• Uniqueness principle: Solutions cannot intersect or cross equilibrium points

• Global behavior: Long-term trends depend on initial conditions and stability landscape

• Bifurcation detection: Monitor changes in number/stability of equilibria with parameters

Advanced Applications: Phase Plane Analysis
Example: Competing Species Model
The system \(\frac{dx}{dt} = x(1-x-y)\), \(\frac{dy}{dt} = y(0.75-y-0.5x)\) creates a 2D phase portrait showing species competition dynamics and multiple equilibria.

Analysis: This extends 1D reasoning to 2D systems:

  • Nullclines show where each variable's rate is zero
  • Equilibrium points occur where both nullclines intersect
  • Stability analysis uses Jacobian matrix at equilibria
  • Phase portraits reveal complex interaction patterns

Questions & Answers

Question: How can I determine the stability of an equilibrium point just by looking at the slope field?

Answer: You can determine stability by examining the flow direction near the equilibrium:

Stable equilibrium:

  • Slope segments point toward the equilibrium from both sides
  • Nearby solutions approach the equilibrium as x increases
  • Visually, arrows point inward toward the equilibrium line

Unstable equilibrium:

  • Slope segments point away from the equilibrium on both sides
  • Nearby solutions move away from the equilibrium as x increases
  • Visually, arrows point outward from the equilibrium line

Semistable equilibrium:

  • Slope segments point toward the equilibrium on one side and away on the other
  • Solutions approach from one direction and diverge from the other

The key is observing the direction of the flow relative to the equilibrium point!

Question: What happens when a solution starts exactly at an equilibrium point?

Answer: This is a fundamental property of equilibrium solutions:

If a solution starts exactly at an equilibrium point where \(\frac{dy}{dx} = 0\), then the solution remains at that point for all values of x. The solution is constant and equal to the equilibrium value.

Mathematical explanation:

  • At equilibrium: \(y'(x) = 0\) for all x
  • This means the solution doesn't change: \(y(x) = y_0\) (constant)
  • This constant function satisfies the differential equation

Physical interpretation:

  • The system is in balance and stays in balance
  • No forces or influences cause change from this state
  • This represents a steady-state solution

This is why equilibrium points are called "steady states" - they represent unchanging conditions.

Question: How do I handle cases where the slope field suggests solutions might cross, but uniqueness says they can't?

Answer: This apparent contradiction highlights an important principle:

The uniqueness theorem: Under reasonable conditions (Lipschitz continuity), solutions to initial value problems cannot intersect or cross each other, including equilibrium solutions.

What this means:

  • Solutions are confined to their respective regions between equilibria
  • If the slope field suggests crossing, it's due to limitations in visual representation
  • Mathematically, solutions maintain their ordering
  • A solution starting above an equilibrium stays above it
  • A solution starting below an equilibrium stays below it

Visual interpretation:

  • Equilibrium lines act as barriers that solutions cannot cross
  • Slope fields show direction but not actual intersection possibility
  • The field gives qualitative behavior, not exact crossings

Trust the mathematical principle over visual appearance!

Question: How do I find the critical threshold in a bistable system?

Answer: Finding critical thresholds involves identifying the boundary between different basins of attraction:

For autonomous equations:

  1. Identify all equilibria by solving \(\frac{dy}{dx} = 0\)
  2. Determine stability of each equilibrium
  3. Locate unstable equilibria between stable ones
  4. The unstable equilibrium often serves as the critical threshold

Example: For \(\frac{dy}{dx} = y(1-y)(y-3)\) with stable equilibria at y=0 and y=3:

  • Unstable equilibrium at y=1 acts as threshold
  • Solutions with y(0) ∈ (0,1) approach y=0
  • Solutions with y(0) ∈ (1,3) approach y=3

For non-autonomous equations:

  • The threshold may depend on initial time
  • Numerical methods may be needed
  • Phase plane analysis becomes more complex

Critical thresholds separate different long-term behaviors!

Question: What's the difference between local and global stability analysis?

Answer: The distinction is fundamental to understanding solution behavior:

Local stability:

  • Analyzes behavior of solutions that start very close to the equilibrium
  • Uses linearization around the equilibrium point
  • Determined by eigenvalues of the Jacobian matrix
  • If nearby solutions approach the equilibrium, it's locally stable
  • Only considers small perturbations from equilibrium

Global stability:

  • Analyzes behavior of solutions regardless of how far they start from equilibrium
  • Requires more sophisticated techniques (Lyapunov functions, phase analysis)
  • Considers the entire basin of attraction
  • If ALL solutions in the domain approach the equilibrium, it's globally stable
  • Provides complete picture of long-term behavior

Relationship:

  • Global stability implies local stability
  • Local stability does NOT imply global stability
  • Slope field analysis often reveals global behavior patterns

Slope fields are particularly valuable for global stability analysis!