Domain and Range of Inverse Functions: Understanding Function Inversion

Master the relationship between domains and ranges of functions and their inverses through 5 detailed exercises with step-by-step solutions, visual explanations, and comprehensive learning materials.

Core Concepts & Properties
\( \text{Domain}(f) = \text{Range}(f^{-1}) \)
Domain-Range Swap Property
\( \text{Range}(f) = \text{Domain}(f^{-1}) \)
Range-Domain Swap Property
\( f(f^{-1}(x)) = f^{-1}(f(x)) = x \)
Inverse Composition Property
\( (a,b) \in f \leftrightarrow (b,a) \in f^{-1} \)
Point Reflection Property
Key Definitions:

Domain: Set of all possible input values for which a function is defined

Range: Set of all possible output values a function can produce

Inverse Function: A function that "undoes" the action of another function

One-to-One Function: A function where each output corresponds to exactly one input (passes horizontal line test)

Domain-Restricted Function: A function whose domain has been limited to make it one-to-one

Domain-Range Analysis Process:
  1. Identify the original function's domain and range
  2. Determine if the function is one-to-one
  3. If not one-to-one, apply domain restriction
  4. Find the inverse function algebraically
  5. Determine the domain of the inverse (which equals the range of the original)
  6. Verify the relationship between domains and ranges
Memory Aid: Domain and range swap places in the inverse
Memory Aid: x-values become y-values and vice versa
Key Note: Only one-to-one functions have inverses that are also functions
Solution: Exercises 1 to 3
1 Linear Function Analysis
Exercise 1
For the function \( f(x) = 3x - 2 \), find the domain and range of f and f⁻¹.
Strategy:

For linear functions: The domain and range are typically all real numbers, then apply the domain-range swap principle.

Solution Steps:
  1. Determine domain and range of f(x) = 3x - 2
  2. Find the inverse function f⁻¹(x)
  3. Determine domain and range of f⁻¹(x)
  4. Verify the domain-range swap relationship
Original Function
\( f(x) = 3x - 2 \)
Domain of f
All real numbers
Range of f
All real numbers
Step 1: Find the domain and range of f(x)

Since f(x) = 3x - 2 is a linear function with non-zero slope, it's defined for all real numbers.

Domain of f: (-∞, ∞)

Range of f: (-∞, ∞) (linear functions with non-zero slope have full range)

Step 2: Find the inverse function

\( y = 3x - 2 \)

\( x = 3y - 2 \)

\( x + 2 = 3y \)

\( y = \frac{x + 2}{3} \)

So \( f^{-1}(x) = \frac{x + 2}{3} \)

Step 3: Determine domain and range of f⁻¹(x)

The inverse function \( f^{-1}(x) = \frac{x + 2}{3} \) is also linear with non-zero slope.

Domain of f⁻¹: (-∞, ∞)

Range of f⁻¹: (-∞, ∞)

Step 4: Verify the domain-range relationship

Domain of f = (-∞, ∞) = Range of f⁻¹ ✓

Range of f = (-∞, ∞) = Domain of f⁻¹ ✓

Domain of f = Range of f⁻¹ = (-∞, ∞)
Range of f = Domain of f⁻¹ = (-∞, ∞)
Domain and Range Results:

For f(x) = 3x - 2:

Domain: (-∞, ∞), Range: (-∞, ∞)

For f⁻¹(x) = (x + 2)/3:

Domain: (-∞, ∞), Range: (-∞, ∞)

Applied Rules:

• Linear Function Properties: Non-zero slope linear functions have full domain and range

• Domain-Range Swap: Domain of original becomes range of inverse

• Verification: Check that relationships hold after finding inverse

2 Radical Function Analysis
Exercise 2
For the function \( f(x) = \sqrt{x + 4} \), find the domain and range of f and f⁻¹.
Strategy:

For radical functions: The expression under the radical must be non-negative, then apply domain-range swap.

Original Function
\( f(x) = \sqrt{x + 4} \)
Domain of f
\( x \geq -4 \)
Range of f
\( y \geq 0 \)
Step 1: Find the domain of f(x)

For \( f(x) = \sqrt{x + 4} \) to be defined, we need: \( x + 4 \geq 0 \)

Therefore: \( x \geq -4 \)

Domain of f: [-4, ∞)

Step 2: Find the range of f(x)

Since the square root function outputs non-negative values:

Minimum value occurs at x = -4: \( f(-4) = \sqrt{-4 + 4} = \sqrt{0} = 0 \)

As x increases, f(x) increases without bound

Range of f: [0, ∞)

Step 3: Find the inverse function

\( y = \sqrt{x + 4} \)

\( y^2 = x + 4 \) (square both sides, noting that y ≥ 0)

\( x = y^2 - 4 \)

So \( f^{-1}(x) = x^2 - 4 \), but we need to consider the domain restriction

Since y ≥ 0 in the original equation, the inverse function is \( f^{-1}(x) = x^2 - 4 \) where x ≥ 0

Step 4: Determine domain and range of f⁻¹(x)

Domain of f⁻¹: [0, ∞) (from the range of f)

Range of f⁻¹: [-4, ∞) (since x² - 4 ≥ -4 for x ≥ 0)

Step 5: Verify the domain-range relationship

Domain of f = [-4, ∞) = Range of f⁻¹ ✓

Range of f = [0, ∞) = Domain of f⁻¹ ✓

Domain of f = [-4, ∞), Range of f = [0, ∞)
Domain of f⁻¹ = [0, ∞), Range of f⁻¹ = [-4, ∞)
Domain and Range Results:

For f(x) = √(x + 4):

Domain: [-4, ∞), Range: [0, ∞)

For f⁻¹(x) = x² - 4 (x ≥ 0):

Domain: [0, ∞), Range: [-4, ∞)

Applied Rules:

• Radical Constraint: Expression under radical must be non-negative

• Domain Restriction: Consider range of original function when finding inverse

• Range Determination: Consider the behavior of the inverse function

3 Rational Function Analysis
Exercise 3
For the function \( f(x) = \frac{2x + 1}{x - 3} \), find the domain and range of f and f⁻¹.
Strategy:

For rational functions: Identify vertical asymptotes (domain restrictions) and horizontal asymptotes (range restrictions).

Original Function
\( f(x) = \frac{2x + 1}{x - 3} \)
Domain of f
\( x \neq 3 \)
Range of f
\( y \neq 2 \)
Step 1: Find the domain of f(x)

The denominator cannot be zero: \( x - 3 \neq 0 \)

Therefore: \( x \neq 3 \)

Domain of f: (-∞, 3) ∪ (3, ∞)

Step 2: Find the range of f(x)

Find horizontal asymptote: For rational functions, compare degrees of numerator and denominator

Both numerator and denominator have degree 1, so horizontal asymptote is y = 2/1 = 2

The function approaches but never reaches y = 2

Range of f: (-∞, 2) ∪ (2, ∞)

Step 3: Find the inverse function

\( y = \frac{2x + 1}{x - 3} \)

\( y(x - 3) = 2x + 1 \)

\( xy - 3y = 2x + 1 \)

\( xy - 2x = 3y + 1 \)

\( x(y - 2) = 3y + 1 \)

\( x = \frac{3y + 1}{y - 2} \)

So \( f^{-1}(x) = \frac{3x + 1}{x - 2} \)

Step 4: Determine domain and range of f⁻¹(x)

Domain of f⁻¹: x ≠ 2 (denominator cannot be zero)

Range of f⁻¹: y ≠ 3 (horizontal asymptote is y = 3/1 = 3)

Domain of f⁻¹: (-∞, 2) ∪ (2, ∞)

Range of f⁻¹: (-∞, 3) ∪ (3, ∞)

Step 5: Verify the domain-range relationship

Domain of f = (-∞, 3) ∪ (3, ∞) = Range of f⁻¹ ✓

Range of f = (-∞, 2) ∪ (2, ∞) = Domain of f⁻¹ ✓

Domain of f = (-∞, 3) ∪ (3, ∞), Range of f = (-∞, 2) ∪ (2, ∞)
Domain of f⁻¹ = (-∞, 2) ∪ (2, ∞), Range of f⁻¹ = (-∞, 3) ∪ (3, ∞)
Domain and Range Results:

For f(x) = (2x + 1)/(x - 3):

Domain: (-∞, 3) ∪ (3, ∞), Range: (-∞, 2) ∪ (2, ∞)

For f⁻¹(x) = (3x + 1)/(x - 2):

Domain: (-∞, 2) ∪ (2, ∞), Range: (-∞, 3) ∪ (3, ∞)

Applied Rules:

• Rational Function Domain: Exclude values that make denominator zero

• Horizontal Asymptotes: Determine range restrictions

• Domain-Range Swap: Fundamental property of inverse functions

Solution: Exercises 4 to 5
4 Domain Restriction Analysis
Exercise 4
The function \( f(x) = x^2 - 4 \) is not one-to-one. Restrict the domain to make it one-to-one and find the domain and range of both f and f⁻¹ on this restricted domain.
Strategy:

Parabola restriction: Restrict to one side of the vertex to make the function one-to-one.

Original Function
\( f(x) = x^2 - 4 \)
Vertex
x = 0
Restricted Domain
x ≥ 0
Step 1: Analyze the original function

\( f(x) = x^2 - 4 \) is a parabola opening upward with vertex at (0, -4)

Since it opens upward and has a minimum, it fails the horizontal line test

Step 2: Apply domain restriction

Restrict to the right side of the vertex: \( x \geq 0 \)

On this domain, f(x) is increasing, so it's one-to-one

Step 3: Find domain and range of restricted f(x)

Domain of f: [0, ∞)

Range of f: Since minimum value is at x = 0, f(0) = -4, and function increases without bound: [-4, ∞)

Step 4: Find the inverse function

\( y = x^2 - 4 \) where \( x \geq 0 \)

\( x = y^2 - 4 \)

\( x + 4 = y^2 \)

\( y = \pm\sqrt{x + 4} \)

Since original function had x ≥ 0, we take the positive square root: \( y = \sqrt{x + 4} \)

So \( f^{-1}(x) = \sqrt{x + 4} \)

Step 5: Determine domain and range of f⁻¹(x)

Domain of f⁻¹: Need x + 4 ≥ 0, so x ≥ -4

Range of f⁻¹: Since square root outputs non-negative values: [0, ∞)

Step 6: Verify the domain-range relationship

Domain of f = [0, ∞) = Range of f⁻¹ ✓

Range of f = [-4, ∞) = Domain of f⁻¹ ✓

Restricted f: Domain [0, ∞), Range [-4, ∞)
f⁻¹: Domain [-4, ∞), Range [0, ∞)
Domain and Range Results:

For f(x) = x² - 4 (x ≥ 0):

Domain: [0, ∞), Range: [-4, ∞)

For f⁻¹(x) = √(x + 4):

Domain: [-4, ∞), Range: [0, ∞)

Applied Rules:

• Domain Restriction: Limit to one side of vertex for parabolas

• Range Consideration: Consider the restricted domain when finding inverse

• Sign Selection: Choose appropriate sign based on original domain restriction

5 Exponential Function Analysis
Exercise 5
For the function \( f(x) = e^{x+2} - 3 \), find the domain and range of f and f⁻¹.
Strategy:

Exponential function: The base function eˣ has domain ℝ and range (0, ∞), then apply transformations.

Original Function
\( f(x) = e^{x+2} - 3 \)
Domain of f
All real numbers
Range of f
y > -3
Step 1: Find the domain of f(x)

Since eˣ is defined for all real numbers, and x + 2 is defined for all real numbers:

Domain of f: (-∞, ∞)

Step 2: Find the range of f(x)

Since eˣ > 0 for all x, we have eˣ⁺² > 0 for all x

Therefore eˣ⁺² - 3 > -3 for all x

Range of f: (-3, ∞)

Step 3: Find the inverse function

\( y = e^{x+2} - 3 \)

\( y + 3 = e^{x+2} \)

\( \ln(y + 3) = x + 2 \)

\( x = \ln(y + 3) - 2 \)

So \( f^{-1}(x) = \ln(x + 3) - 2 \)

Step 4: Determine domain and range of f⁻¹(x)

Domain of f⁻¹: Need x + 3 > 0, so x > -3

Range of f⁻¹: Since ln(x) can take any real value, ln(x + 3) - 2 can take any real value: (-∞, ∞)

Step 5: Verify the domain-range relationship

Domain of f = (-∞, ∞) = Range of f⁻¹ ✓

Range of f = (-3, ∞) = Domain of f⁻¹ ✓

Domain of f = (-∞, ∞), Range of f = (-3, ∞)
Domain of f⁻¹ = (-3, ∞), Range of f⁻¹ = (-∞, ∞)
Domain and Range Results:

For f(x) = eˣ⁺² - 3:

Domain: (-∞, ∞), Range: (-3, ∞)

For f⁻¹(x) = ln(x + 3) - 2:

Domain: (-3, ∞), Range: (-∞, ∞)

Applied Rules:

• Exponential Domain: Always all real numbers

• Logarithmic Domain: Argument must be positive

• Range Transformation: Apply transformations to base function range

Comprehensive Theory & Applications
\( \text{Domain}(f) = \text{Range}(f^{-1}) \)
Fundamental Domain-Range Relationship
Range-Domain
\(\text{Range}(f) = \text{Domain}(f^{-1})\)
Swap relationship
Composition
\( f(f^{-1}(x)) = f^{-1}(f(x)) = x \)
Identity property
One-to-One
\( f(a) = f(b) \Rightarrow a = b \)
Horizontal line test
Inverse
\( (f^{-1})^{-1} = f \)
Inverse of inverse
Key Properties:

Domain-Restriction Necessity: Only one-to-one functions have inverses that are also functions

Horizontal Line Test: A function is one-to-one if no horizontal line intersects its graph more than once

Domain-Range Swap: Domain of original function becomes range of inverse, and vice versa

Continuity Preservation: Inverse of continuous function is continuous on its domain

Analysis Techniques:
  1. Function Classification: Determine the type of function (linear, quadratic, rational, etc.)
  2. Domain Identification: Find all values for which the function is defined
  3. Range Determination: Find all possible output values
  4. One-to-One Check: Verify the function is invertible
  5. Inverse Finding: Calculate the inverse function algebraically
  6. Domain-Range Verification: Confirm the swap relationship
Memory Aid: Domain and range are like "input" and "output" that swap roles
Memory Aid: Think of function as a "machine" that transforms inputs to outputs
Key Note: Domain restrictions may be necessary to ensure one-to-one property
Common Mistake: Forgetting to check if function is one-to-one before finding inverse
Applications: Solving equations, logarithmic scales, inverse kinematics, cryptography
Exam Tips: Memorize domain-range swap, practice with different function types, verify all results
Essential Rules:

• One-to-One Requirement: Function must pass horizontal line test to have inverse

• Domain-Range Swap: Domain of f ↔ Range of f⁻¹, Range of f ↔ Domain of f⁻¹

• Composition Identity: f(f⁻¹(x)) = f⁻¹(f(x)) = x

• Domain Restriction: May be needed to ensure invertibility

• Verification: Always check that domain-range relationship holds

Questions & Answers

Question: Why does the domain of a function become the range of its inverse? Can you explain this intuitively?

Answer: This relationship occurs because inverse functions reverse the input-output relationship:

  • Original function f: Takes inputs from domain and produces outputs in range
  • Inverse function f⁻¹: Takes the previous outputs (from range of f) as inputs and returns the original inputs (from domain of f)

Think of it as a "reverse journey": if f takes you from city A to city B, then f⁻¹ takes you back from city B to city A. So the destinations of f become the starting points of f⁻¹.

For example, if f(2) = 5, then f⁻¹(5) = 2. The number 2 came from the domain of f and became part of the range of f⁻¹. The number 5 came from the range of f and became part of the domain of f⁻¹.

Question: How do I know if a function is one-to-one? What's the horizontal line test?

Answer: A function is one-to-one if each output corresponds to exactly one input:

  • Algebraic Test: If f(a) = f(b) implies a = b, then f is one-to-one
  • Horizontal Line Test: Draw horizontal lines across the graph; if any line intersects the graph more than once, the function is not one-to-one
  • Graphical Property: Each y-value is associated with only one x-value

Examples:

  • f(x) = x³ is one-to-one (each horizontal line intersects at most once)
  • f(x) = x² is not one-to-one (horizontal line y = 4 intersects at x = 2 and x = -2)

Only one-to-one functions have inverses that are also functions.

Question: What happens if I try to find the inverse of a function that's not one-to-one?

Answer: If a function is not one-to-one, its inverse relation exists but is not a function:

  • Inverse relation: The set of ordered pairs with coordinates swapped
  • Not a function: Fails the vertical line test - one input maps to multiple outputs
  • Solution: Restrict the domain to make the function one-to-one

For example, f(x) = x² is not one-to-one on (-∞, ∞), but if we restrict to x ≥ 0, then f⁻¹(x) = √x is a function. Similarly, if we restrict to x ≤ 0, then f⁻¹(x) = -√x is a function.

The key is ensuring that each input to the inverse corresponds to exactly one output.