Graph of Inverse Function: The graph of f⁻¹ is the reflection of the graph of f across the line y = x. If (a, b) is on the graph of f, then (b, a) is on the graph of f⁻¹.
- Graph the original function f(x)
- Find the inverse function f⁻¹(x)
- Graph the inverse function f⁻¹(x)
- Draw the line y = x as the axis of reflection
- Verify that corresponding points are reflections across y = x
y = 2x - 3
x = 2y - 3
x + 3 = 2y
(x + 3)/2 = y
So f⁻¹(x) = (x + 3)/2
Y-intercept: (0, -3)
Slope: 2 (rise 2, run 1)
Additional point: (1, -1)
Y-intercept: (0, 3/2)
Slope: 1/2 (rise 1, run 2)
Additional point: (1, 2)
This line passes through origin with slope 1
It serves as the axis of reflection
Point (0, -3) on f(x) corresponds to (-3, 0) on f⁻¹(x)
Point (1, -1) on f(x) corresponds to (-1, 1) on f⁻¹(x)
Each pair is symmetric across y = x
f(x): domain (-∞, ∞), range (-∞, ∞)
f⁻¹(x): domain (-∞, ∞), range (-∞, ∞)
Domain and range swap between function and inverse
f(x) = 2x - 3 and f⁻¹(x) = (x + 3)/2 are reflections across y = x
Domain and range are both (-∞, ∞) for both functions
The graphs intersect on the line y = x
Corresponding points are symmetric across y = x
The graph of f⁻¹(x) = (x + 3)/2 is the reflection of f(x) = 2x - 3 across the line y = x. The two graphs intersect at the point where x = (x + 3)/2, which is x = 3, so at point (3, 3).
• Reflection property: Graph of f⁻¹ is reflection of f across y = x
• Point correspondence: If (a, b) is on f, then (b, a) is on f⁻¹
• Domain-range swap: Domain of f equals range of f⁻¹
• Intersection point: Functions and inverses intersect on y = x line
Restriction for Inverses: To ensure functions are one-to-one, we often restrict their domains. For f(x) = √x, domain is x ≥ 0. For g(x) = x², we restrict domain to x ≥ 0 to make it one-to-one.
f(x) = √x has domain x ≥ 0 and range y ≥ 0
g(x) = x² with restricted domain x ≥ 0 has range y ≥ 0
(f ∘ g)(x) = f(g(x)) = f(x²) = √(x²) = |x| = x (since x ≥ 0)
(g ∘ f)(x) = g(f(x)) = g(√x) = (√x)² = x (since x ≥ 0)
Starts at origin (0, 0)
Passes through (1, 1), (4, 2), (9, 3)
Increasing function with horizontal tangent at origin
Starts at origin (0, 0)
Passes through (1, 1), (2, 4), (3, 9)
Increasing function with vertical tangent at origin
Both functions intersect this line at (0, 0) and (1, 1)
These are the points where f(x) = x
Point (4, 2) on f(x) = √x corresponds to (2, 4) on g(x) = x²
Point (9, 3) on f(x) = √x corresponds to (3, 9) on g(x) = x²
Each pair is symmetric across y = x
f(x) = √x and g(x) = x² (x ≥ 0) are inverse functions
Both graphs are symmetric across y = x
Domain of f: [0, ∞), Range: [0, ∞)
Domain of g: [0, ∞), Range: [0, ∞)
They intersect at (0, 0) and (1, 1)
f(x) = √x and g(x) = x² (for x ≥ 0) are inverse functions. Their graphs are reflections of each other across the line y = x, and they intersect at points where x = √x, specifically at (0, 0) and (1, 1).
• Domain restriction: Necessary to make functions one-to-one
• Reflection property: Inverse graphs are symmetric across y = x
• Intersection points: Functions and inverses intersect where f(x) = x
• Function behavior: Square root grows slower than quadratic
Transcendental Inverse Pair: Exponential and logarithmic functions are classic examples of inverse functions. For f(x) = aˣ and f⁻¹(x) = logₐ(x), they are reflections across y = x.
f(x) = 2ˣ has domain (-∞, ∞) and range (0, ∞)
f⁻¹(x) = log₂(x) has domain (0, ∞) and range (-∞, ∞)
Y-intercept: (0, 1)
Passes through (-1, 1/2), (1, 2), (2, 4)
Horizontal asymptote: y = 0
Increasing exponential function
X-intercept: (1, 0)
Passes through (1/2, -1), (2, 1), (4, 2)
Vertical asymptote: x = 0
Increasing logarithmic function
Asymptotes are also reflections of each other
Horizontal asymptote y = 0 for 2ˣ becomes vertical asymptote x = 0 for log₂(x)
Point (0, 1) on 2ˣ corresponds to (1, 0) on log₂(x)
Point (1, 2) on 2ˣ corresponds to (2, 1) on log₂(x)
Point (2, 4) on 2ˣ corresponds to (4, 2) on log₂(x)
To find where 2ˣ = log₂(x), we look for where f(x) = x
This occurs where 2ˣ = x, which happens approximately at x ≈ 0.64
f(x) = 2ˣ and f⁻¹(x) = log₂(x) are inverse functions
Graphs are symmetric across y = x
Domain of f: (-∞, ∞), Range: (0, ∞)
Domain of f⁻¹: (0, ∞), Range: (-∞, ∞)
Asymptotes are reflected: y = 0 ↔ x = 0
f(x) = 2ˣ and f⁻¹(x) = log₂(x) are inverse functions. Their graphs are reflections across y = x. The exponential function has horizontal asymptote y = 0, which corresponds to the logarithmic function's vertical asymptote x = 0.
• Asymptote reflection: Horizontal asymptotes become vertical asymptotes
• Domain-range swap: Domain of f equals range of f⁻¹
• Reflection property: All corresponding points reflect across y = x
• Transcendental pairs: Exponential and logarithmic functions are inverses
Inverse Function Graph: The graph of f⁻¹ is obtained by reflecting the graph of f across the line y = x
Reflection Property: If (a, b) is on the graph of f, then (b, a) is on the graph of f⁻¹
One-to-One Function: A function where each output corresponds to exactly one input; only these functions have inverses that are also functions
Domain Restriction: Sometimes needed to make a function one-to-one so it has an inverse function
Asymptote Reflection: Horizontal asymptotes of f become vertical asymptotes of f⁻¹
- Verify one-to-one: Ensure the function passes the horizontal line test
- Find inverse algebraically: Swap x and y, solve for y
- Graph original function: Plot key points and features
- Graph inverse function: Plot corresponding reflected points
- Draw y = x line: This is the axis of reflection
- Verify reflection: Check that corresponding points are symmetric
- Identify key features: Asymptotes, intercepts, domain, range
• Reflection: Graph of f⁻¹ is reflection of f across y = x
• Point correspondence: If (a, b) is on f, then (b, a) is on f⁻¹
• Domain-range swap: dom(f) = range(f⁻¹), range(f) = dom(f⁻¹)
• Asymptote reflection: Horizontal asymptotes become vertical
• Intersection: f and f⁻¹ intersect where f(x) = x
Domain Restriction: To make f(x) = x² - 4 one-to-one, we restrict the domain to x ≥ 0. This ensures each output corresponds to exactly one input, allowing for an inverse function.
f(x) = x² - 4 with restricted domain x ≥ 0
This is the right half of the parabola y = x² - 4
Vertex at (0, -4), opening upward
y = x² - 4
x = y² - 4
x + 4 = y²
±√(x + 4) = y
Since original domain is x ≥ 0, we take positive square root
So f⁻¹(x) = √(x + 4)
Starts at (0, -4)
Passes through (1, -3), (2, 0), (3, 5)
Increasing function for x ≥ 0
Domain: x ≥ -4
Starts at (-4, 0)
Passes through (-3, 1), (0, 2), (5, 3)
Increasing function
Functions intersect where x² - 4 = x
x² - x - 4 = 0
Using quadratic formula: x = (1 ± √17)/2
Approximately x ≈ 2.56 and x ≈ -1.56
Only x ≈ 2.56 is valid since x ≥ 0 for f
Point (2, 0) on f corresponds to (0, 2) on f⁻¹
Point (3, 5) on f corresponds to (5, 3) on f⁻¹
These points are symmetric across y = x
f(x) = x² - 4 (x ≥ 0) and f⁻¹(x) = √(x + 4) are inverse functions
Domain of f: [0, ∞), Range: [-4, ∞)
Domain of f⁻¹: [-4, ∞), Range: [0, ∞)
Graphs are symmetric across y = x
They intersect at approximately (2.56, 2.56)
f(x) = x² - 4 (restricted to x ≥ 0) and f⁻¹(x) = √(x + 4) are inverse functions. Their graphs are reflections across y = x, with f having domain [0, ∞) and range [-4, ∞), while f⁻¹ has domain [-4, ∞) and range [0, ∞).
• Domain restriction: Needed to make quadratic one-to-one
• Reflection property: Graphs are symmetric across y = x
• Domain-range swap: Domain of f equals range of f⁻¹
• Intersection points: Occur where f(x) = x
Self-Inverse Function: A function where f = f⁻¹, meaning the function is its own inverse. For such functions, f(f(x)) = x for all x in the domain.
y = (x + 2)/(x - 1)
y(x - 1) = x + 2
yx - y = x + 2
yx - x = y + 2
x(y - 1) = y + 2
x = (y + 2)/(y - 1)
So f⁻¹(x) = (x + 2)/(x - 1)
f(f(x)) = f((x + 2)/(x - 1))
= ((x + 2)/(x - 1) + 2)/((x + 2)/(x - 1) - 1)
= ((x + 2 + 2(x - 1))/(x - 1))/((x + 2 - (x - 1))/(x - 1))
= ((x + 2 + 2x - 2)/(x - 1))/((x + 2 - x + 1)/(x - 1))
= (3x/(x - 1))/(3/(x - 1)) = 3x/3 = x ✓
Vertical asymptote: x = 1 (where denominator = 0)
Horizontal asymptote: y = 1 (ratio of leading coefficients)
X-intercept: x = -2 (when numerator = 0)
Y-intercept: y = -2 (at x = 0)
Since f = f⁻¹, the graph is symmetric about y = x
This means the function is its own reflection across y = x
The graph of f is identical to the graph of f⁻¹
The function intersects y = x where f(x) = x
(x + 2)/(x - 1) = x
x + 2 = x(x - 1) = x² - x
x + 2 = x² - x
0 = x² - 2x - 2
x = (2 ± √(4 + 8))/2 = (2 ± 2√3)/2 = 1 ± √3
The graph appears identical to itself when reflected across y = x
This is the characteristic of a self-inverse function
f(x) = (x + 2)/(x - 1) is self-inverse: f = f⁻¹
Graph is symmetric across y = x
Vertical asymptote: x = 1
Horizontal asymptote: y = 1
Intersects y = x at x = 1 ± √3
f(x) = (x + 2)/(x - 1) is a self-inverse function, meaning f = f⁻¹. The graph is symmetric about the line y = x, and the function intersects this line at x = 1 ± √3.
• Self-inverse property: f(f(x)) = x for all x in domain
• Graph symmetry: Self-inverse functions are symmetric about y = x
• Verification: Check that f(f(x)) = x
• Asymptote preservation: Self-inverse functions have symmetric asymptotes
Inverse Function Graph: The graph of f⁻¹ is obtained by reflecting the graph of f across the line y = x. Every point (a, b) on f corresponds to point (b, a) on f⁻¹.
Reflection Property: The graph of an inverse function is the mirror image of the original function across the line y = x, which acts as the axis of symmetry.
One-to-One Function: A function where each output corresponds to exactly one input. Only one-to-one functions have inverses that are also functions.
Domain Restriction: The process of limiting the domain of a function to make it one-to-one, thus allowing it to have an inverse function.
Self-Inverse Function: A function that is its own inverse, meaning f(f(x)) = x for all x in the domain. The graph of such a function is symmetric about the line y = x.
- Verify one-to-one property: Ensure the function passes the horizontal line test
- Find the inverse function: Algebraically determine f⁻¹(x)
- Identify domains and ranges: Note how they swap between f and f⁻¹
- Graph the original function: Plot key points, intercepts, and asymptotes
- Graph the inverse function: Plot corresponding reflected points
- Draw y = x line: This serves as the axis of reflection
- Verify reflection property: Check that corresponding points are symmetric
- Analyze key features: Intercepts, asymptotes, intersections, behavior
• Reflection property: Graph of f⁻¹ is reflection of f across y = x
• Point correspondence: If (a, b) is on f, then (b, a) is on f⁻¹
• Domain-range swap: dom(f) = range(f⁻¹), range(f) = dom(f⁻¹)
• Asymptote reflection: Horizontal asymptotes become vertical asymptotes
• Intersection property: f and f⁻¹ intersect where f(x) = x
• Self-inverse: When f = f⁻¹, graph is symmetric about y = x
• One-to-one requirement: Only one-to-one functions have inverse functions
Questions & Answers
Question: Why do the graphs of a function and its inverse have to be reflections across y = x? What's the mathematical reason behind this?
Answer: The reflection property stems from the definition of inverse functions:
Definition: If f and f⁻¹ are inverse functions, then f(f⁻¹(x)) = x and f⁻¹(f(x)) = x.
Point correspondence: If (a, b) is on the graph of f, this means f(a) = b. Then, by definition of inverse, f⁻¹(b) = a, which means (b, a) is on the graph of f⁻¹.
Reflection across y = x: The transformation that takes (a, b) to (b, a) is precisely reflection across the line y = x.
Example: If (2, 5) is on f, then f(2) = 5. For the inverse, f⁻¹(5) = 2, so (5, 2) is on f⁻¹. The points (2, 5) and (5, 2) are reflections across y = x.
This geometric relationship is a direct consequence of the algebraic relationship between a function and its inverse.
Question: How do asymptotes behave when graphing inverse functions? Do they also get reflected?
Answer: Yes, asymptotes are also reflected across the line y = x:
Horizontal asymptotes: If f(x) has a horizontal asymptote y = k, then f⁻¹(x) has a vertical asymptote x = k.
Vertical asymptotes: If f(x) has a vertical asymptote x = h, then f⁻¹(x) has a horizontal asymptote y = h.
Example: If f(x) = 1/x has horizontal asymptote y = 0 and vertical asymptote x = 0, then f⁻¹(x) = 1/x (same function) has the same asymptotes.
Another example: If f(x) = (x+1)/(x-2) has horizontal asymptote y = 1 and vertical asymptote x = 2, then f⁻¹(x) has horizontal asymptote x = 1 (after reflection) and vertical asymptote y = 2 (after reflection).
This happens because the roles of x and y are swapped when finding the inverse, so horizontal and vertical properties interchange.
Question: Where do a function and its inverse intersect? I heard they only intersect on the line y = x, but is that always true?
Answer: If a function and its inverse intersect, their intersection points must lie on the line y = x. Here's why:
Proof: Suppose (a, b) is an intersection point of f and f⁻¹, meaning f(a) = b and f⁻¹(a) = b.
Since f⁻¹(a) = b, by definition of inverse, f(b) = a.
So we have: f(a) = b and f(b) = a.
For a function to satisfy both f(a) = b and f(b) = a, if the function is one-to-one, we must have a = b.
Important exception: This is guaranteed only for strictly monotonic (always increasing or always decreasing) functions. For functions that aren't strictly monotonic, there might be special cases, but typically all intersections occur on y = x.
Example: For f(x) = √x and f⁻¹(x) = x² (x ≥ 0), they intersect at (0,0) and (1,1), both on y = x.
To find intersections, solve f(x) = x (find where function equals identity function).