Circle in coordinate plane: The set of all points equidistant from a fixed point (center). Standard form: \((x-h)^2 + (y-k)^2 = r^2\) where \((h,k)\) is center and \(r\) is radius.
- Identify center coordinates (h, k)
- Identify radius r
- Substitute into standard form: \((x-h)^2 + (y-k)^2 = r^2\)
- Graph by plotting center and points at radius distance
Center: \((h, k) = (-2, 5)\)
Radius: \(r = 7\)
Standard form: \((x-h)^2 + (y-k)^2 = r^2\)
\((x-(-2))^2 + (y-5)^2 = 7^2\)
\((x+2)^2 + (y-5)^2 = 49\)
Right: \((-2+7, 5) = (5, 5)\)
Left: \((-2-7, 5) = (-9, 5)\)
Top: \((-2, 5+7) = (-2, 12)\)
Bottom: \((-2, 5-7) = (-2, -2)\)
Test point (5, 5): \((5+2)^2 + (5-5)^2 = 7^2 + 0^2 = 49\) ✓
The equation of the circle is \((x+2)^2 + (y-5)^2 = 49\). Key points: (5, 5), (-9, 5), (-2, 12), (-2, -2).
• Standard Form: \((x-h)^2 + (y-k)^2 = r^2\)
• Sign Rule: Subtract center coordinates from variables
• Distance Property: All points on circle are exactly r units from center
Completing the square: A method to rewrite quadratic expressions in perfect square form. Essential for converting general form to center-radius form.
\(x^2 + y^2 + 6x - 8y - 11 = 0\)
\(x^2 + 6x + y^2 - 8y = 11\)
Take coefficient of x: 6, divide by 2: 3, square: 9
\(x^2 + 6x + 9 = (x+3)^2\)
Take coefficient of y: -8, divide by 2: -4, square: 16
\(y^2 - 8y + 16 = (y-4)^2\)
\(x^2 + 6x + 9 + y^2 - 8y + 16 = 11 + 9 + 16\)
\((x+3)^2 + (y-4)^2 = 36\)
Comparing with \((x-h)^2 + (y-k)^2 = r^2\)
Center: \((-3, 4)\), Radius: \(r = \sqrt{36} = 6\)
The center-radius form is \((x+3)^2 + (y-4)^2 = 36\). Center: (-3, 4), Radius: 6.
• Completing the Square: Take half the coefficient, square it, add to both sides
• Sign Rule: If center is \((h,k)\), terms are \((x-h)\) and \((y-k)\)
• Radical Property: \(r = \sqrt{r^2}\)
Point-circle relationship: For a circle with center \((h,k)\) and radius \(r\), a point \((x,y)\) is on the circle if \((x-h)^2 + (y-k)^2 = r^2\), inside if the left side is less than \(r^2\), and outside if greater than \(r^2\).
Center: \((3, -1)\), Radius: \(r = \sqrt{25} = 5\)
\((1-3)^2 + (-2-(-1))^2 = (-2)^2 + (-1)^2 = 4 + 1 = 5\)
Compare with \(r^2 = 25\)
Since \(5 < 25\), the point is inside the circle
Distance = \(\sqrt{(1-3)^2 + (-2-(-1))^2} = \sqrt{4 + 1} = \sqrt{5} \approx 2.24\)
Since \(\sqrt{5} \approx 2.24 < 5\), the point is indeed inside the circle
The point (1, -2) lies inside the circle. The distance from the point to the center is \(\sqrt{5}\) units (approximately 2.24 units).
• Point-Circle Test: Compare \((x-h)^2 + (y-k)^2\) with \(r^2\)
• Distance Formula: \(\sqrt{(x_2-x_1)^2 + (y_2-y_1)^2}\)
• Position Rule: Less than \(r^2\) = inside, equal = on, greater = outside
Circle: The set of all points in a plane that are equidistant from a fixed point called the center.
Radius: The distance from the center to any point on the circle.
Diameter: A line segment passing through the center, connecting two points on the circle (length = 2r).
Chord: A line segment connecting any two points on the circle.
- From general to center-radius: Group x and y terms, complete the square for each
- From center-radius to general: Expand binomials and rearrange
- Identify center: Look at signs in parentheses (opposite of h and k)
- Find radius: Take square root of right side
• Standard Form: \((x-h)^2 + (y-k)^2 = r^2\)
• General Form: \(x^2 + y^2 + Dx + Ey + F = 0\)
• Center: \((h, k)\) in standard form
• Radius: \(r = \sqrt{r^2}\) in standard form
• Point Test: \((x-h)^2 + (y-k)^2\) compared to \(r^2\)
Intersection of circle and line: Points that satisfy both equations simultaneously. Solve by substitution: substitute line equation into circle equation.
Circle: \((x-1)^2 + (y-2)^2 = 25\)
Line: \(y = 2x - 3\)
\((x-1)^2 + ((2x-3)-2)^2 = 25\)
\((x-1)^2 + (2x-5)^2 = 25\)
\((x-1)^2 + (2x-5)^2 = 25\)
\(x^2 - 2x + 1 + 4x^2 - 20x + 25 = 25\)
\(5x^2 - 22x + 26 = 25\)
\(5x^2 - 22x + 1 = 0\)
Using quadratic formula: \(x = \frac{22 \pm \sqrt{(-22)^2 - 4(5)(1)}}{2(5)}\)
\(x = \frac{22 \pm \sqrt{484 - 20}}{10} = \frac{22 \pm \sqrt{464}}{10} = \frac{22 \pm 4\sqrt{29}}{10} = \frac{11 \pm 2\sqrt{29}}{5}\)
For \(x_1 = \frac{11 + 2\sqrt{29}}{5}\): \(y_1 = 2 \cdot \frac{11 + 2\sqrt{29}}{5} - 3 = \frac{22 + 4\sqrt{29} - 15}{5} = \frac{7 + 4\sqrt{29}}{5}\)
For \(x_2 = \frac{11 - 2\sqrt{29}}{5}\): \(y_2 = 2 \cdot \frac{11 - 2\sqrt{29}}{5} - 3 = \frac{22 - 4\sqrt{29} - 15}{5} = \frac{7 - 4\sqrt{29}}{5}\)
The intersection points are \(\left(\frac{11+2\sqrt{29}}{5},\frac{7+4\sqrt{29}}{5}\right)\) and \(\left(\frac{11-2\sqrt{29}}{5},\frac{7-4\sqrt{29}}{5}\right)\).
• System Solving: Use substitution method
• Quadratic Formula: \(x = \frac{-b \pm \sqrt{b^2-4ac}}{2a}\)
• Verification: Check that both points satisfy original equations
Circle through three points: Given three non-collinear points, there exists exactly one circle passing through all three. Use the general form \(x^2 + y^2 + Dx + Ey + F = 0\) and substitute each point to create a system of equations.
Let the equation be \(x^2 + y^2 + Dx + Ey + F = 0\)
Point A(2, 3): \(4 + 9 + 2D + 3E + F = 0\) → \(2D + 3E + F = -13\)
Point B(4, 1): \(16 + 1 + 4D + E + F = 0\) → \(4D + E + F = -17\)
Point C(0, 5): \(0 + 25 + 0D + 5E + F = 0\) → \(5E + F = -25\)
From equation 3: \(F = -25 - 5E\)
Substitute into equation 1: \(2D + 3E + (-25 - 5E) = -13\) → \(2D - 2E = 12\) → \(D - E = 6\)
Substitute into equation 2: \(4D + E + (-25 - 5E) = -17\) → \(4D - 4E = 8\) → \(D - E = 2\)
We have \(D - E = 6\) and \(D - E = 2\), which is impossible. Let me recalculate:
From equation 1: \(2D + 3E + F = -13\)
From equation 2: \(4D + E + F = -17\)
Subtract: \(-2D + 2E = 4\) → \(-D + E = 2\) → \(E = D + 2\)
From equation 3: \(F = -25 - 5E = -25 - 5(D + 2) = -25 - 5D - 10 = -35 - 5D\)
Substitute into equation 1: \(2D + 3(D + 2) + (-35 - 5D) = -13\)
\(2D + 3D + 6 - 35 - 5D = -13\)
\(-29 = -13\) (contradiction)
Let me recheck the calculations: From point A: \(2^2 + 3^2 + 2D + 3E + F = 0\) → \(4 + 9 + 2D + 3E + F = 0\) → \(2D + 3E + F = -13\)
From point B: \(4^2 + 1^2 + 4D + E + F = 0\) → \(16 + 1 + 4D + E + F = 0\) → \(4D + E + F = -17\)
From point C: \(0^2 + 5^2 + 0D + 5E + F = 0\) → \(25 + 5E + F = 0\) → \(5E + F = -25\)
From equation 3: \(F = -25 - 5E\)
Substitute into equation 1: \(2D + 3E + (-25 - 5E) = -13\) → \(2D - 2E = 12\) → \(D - E = 6\)
Substitute into equation 2: \(4D + E + (-25 - 5E) = -17\) → \(4D - 4E = 8\) → \(D - E = 2\)
This confirms our points are collinear (they lie on a straight line), which means no circle passes through all three points.
Wait, let me verify: slope AB = \(\frac{1-3}{4-2} = \frac{-2}{2} = -1\)
slope AC = \(\frac{5-3}{0-2} = \frac{2}{-2} = -1\)
Yes, all three points lie on the line \(y = -x + 5\), so no circle passes through all three points.
Let me use different points: A(2, 3), B(4, 1), C(0, 1)
Point A(2, 3): \(4 + 9 + 2D + 3E + F = 0\) → \(2D + 3E + F = -13\)
Point B(4, 1): \(16 + 1 + 4D + E + F = 0\) → \(4D + E + F = -17\)
Point C(0, 1): \(0 + 1 + 0D + E + F = 0\) → \(E + F = -1\)
From equation 3: \(F = -1 - E\)
Substitute into equation 1: \(2D + 3E + (-1 - E) = -13\) → \(2D + 2E = -12\) → \(D + E = -6\)
Substitute into equation 2: \(4D + E + (-1 - E) = -17\) → \(4D = -16\) → \(D = -4\)
Therefore: \(E = -6 - D = -6 - (-4) = -2\)
And: \(F = -1 - E = -1 - (-2) = 1\)
General form: \(x^2 + y^2 - 4x - 2y + 1 = 0\)
To convert to standard form, complete the square:
\(x^2 - 4x + y^2 - 2y = -1\)
\(x^2 - 4x + 4 + y^2 - 2y + 1 = -1 + 4 + 1\)
\((x - 2)^2 + (y - 1)^2 = 4\)
The equation of the circle passing through (2,3), (4,1), and (0,1) is \((x-2)^2 + (y-1)^2 = 4\) in standard form and \(x^2 + y^2 - 4x - 2y + 1 = 0\) in general form.
• Three Points Rule: Only non-collinear points define a unique circle
• System Solving: Create 3 equations with 3 unknowns (D, E, F)
• Conversion: Complete the square to move from general to standard form
Circle: The set of all points in a plane equidistant from a fixed point (center).
Center: The fixed point from which all points on the circle are equidistant.
Radius: The constant distance from the center to any point on the circle.
Diameter: A chord passing through the center; length is twice the radius.
Tangent: A line that intersects the circle at exactly one point.
Secant: A line that intersects the circle at two points.
- Identify form needed: Determine if center-radius or general form is required
- Extract known values: Read center and radius from center-radius form
- Convert forms: Use completing the square to switch between forms
- Solve systems: For intersections, substitute and solve simultaneously
- Verify solutions: Check that all solutions satisfy original equations
• Point \((x,y)\) is ON the circle if \((x-h)^2 + (y-k)^2 = r^2\)
• Point \((x,y)\) is INSIDE the circle if \((x-h)^2 + (y-k)^2 < r^2\)
• Point \((x,y)\) is OUTSIDE the circle if \((x-h)^2 + (y-k)^2 > r^2\)
Different radii: \((x-0)^2 + (y-0)^2 = r^2\) with r = 1, 2, 3, 4
Different centers: \((x-h)^2 + (y-0)^2 = 4\) with h = -2, 0, 2
General form variations
Analysis: The chart shows how different parameters affect the position and size of circles.
- Circles grow larger as radius increases
- Circles shift horizontally as center changes
- General form coefficients affect size and position