General form of conics: \(Ax^2 + Bxy + Cy^2 + Dx + Ey + F = 0\). The discriminant \(B^2 - 4AC\) determines the type of conic: \(B^2 - 4AC < 0\) is an ellipse (or circle), \(B^2 - 4AC = 0\) is a parabola, \(B^2 - 4AC > 0\) is a hyperbola.
- Identify coefficients A, B, C from the general form
- Calculate discriminant \(B^2 - 4AC\)
- Determine conic type based on discriminant value
- Convert to standard form by completing the square
- Identify key features and sketch the graph
From \(4x^2 + 9y^2 - 8x + 18y - 23 = 0\)
\(A = 4\), \(B = 0\), \(C = 9\)
Since \(B = 0\), there's no \(xy\) term
\(B^2 - 4AC = 0^2 - 4(4)(9) = 0 - 144 = -144\)
Since \(-144 < 0\), this is an ellipse
Group x and y terms: \(4x^2 - 8x + 9y^2 + 18y = 23\)
Factor coefficients: \(4(x^2 - 2x) + 9(y^2 + 2y) = 23\)
Complete square for x: Take coefficient of x: -2, divide by 2: -1, square: 1
Complete square for y: Take coefficient of y: 2, divide by 2: 1, square: 1
\(4(x^2 - 2x + 1) + 9(y^2 + 2y + 1) = 23 + 4(1) + 9(1)\)
\(4(x-1)^2 + 9(y+1)^2 = 36\)
Divide by 36: \(\frac{4(x-1)^2}{36} + \frac{9(y+1)^2}{36} = 1\)
\(\frac{(x-1)^2}{9} + \frac{(y+1)^2}{4} = 1\)
Standard form: \(\frac{(x-h)^2}{a^2} + \frac{(y-k)^2}{b^2} = 1\) where \(h = 1\), \(k = -1\), \(a^2 = 9\), \(b^2 = 4\)
Center: \((1, -1)\), \(a = 3\), \(b = 2\)
Since \(a > b\), major axis is horizontal
Vertices: \((h \pm a, k) = (1 \pm 3, -1) = (4, -1)\) and \((-2, -1)\)
Co-vertices: \((h, k \pm b) = (1, -1 \pm 2) = (1, 1)\) and \((1, -3)\)
Focal distance: \(c = \sqrt{a^2 - b^2} = \sqrt{9 - 4} = \sqrt{5}\)
Foci: \((h \pm c, k) = (1 \pm \sqrt{5}, -1)\)
This is an ellipse with standard form \(\frac{(x-1)^2}{9} + \frac{(y+1)^2}{4} = 1\). Center: (1, -1), Vertices: (4, -1) and (-2, -1), Co-vertices: (1, 1) and (1, -3), Foci: \((1 \pm \sqrt{5}, -1)\).
• Discriminant Test: \(B^2 - 4AC\) determines conic type
• Completing the Square: Essential for converting to standard form
• Ellipse Properties: Major axis corresponds to larger denominator
Rotated conic: A conic section that has been rotated from its standard position, resulting in an \(xy\) term in the equation. The discriminant \(B^2 - 4AC\) still determines the type regardless of rotation.
From \(x^2 + 4xy + y^2 - 2x + 6y - 3 = 0\)
\(A = 1\), \(B = 4\), \(C = 1\)
Since \(B \neq 0\), this conic is rotated from standard position
\(B^2 - 4AC = 4^2 - 4(1)(1) = 16 - 4 = 12\)
Since \(12 > 0\), this is a hyperbola
Even though the conic is rotated, the discriminant still correctly identifies the type
The \(xy\) term indicates the axes of the hyperbola are not aligned with the coordinate axes
This hyperbola has its transverse and conjugate axes at an angle to the x and y axes
To fully analyze this conic, one would typically rotate the coordinate system to eliminate the \(xy\) term
The rotation angle \(\theta\) can be found using \(\cot(2\theta) = \frac{A-C}{B}\)
For this equation: \(\cot(2\theta) = \frac{1-1}{4} = 0\), so \(2\theta = 90°\), meaning \(\theta = 45°\)
After rotation by 45°, the equation would have no \(xy\) term
The rotation preserves the discriminant value and conic type
This is a hyperbola (discriminant = 12 > 0) that is rotated 45° from its standard position due to the presence of the \(xy\) term. The axes of the hyperbola are not aligned with the coordinate axes.
• Rotation Invariance: Discriminant \(B^2 - 4AC\) determines type regardless of rotation
• Rotated Conics: \(B \neq 0\) indicates rotation from standard position
• Rotation Angle: \(\cot(2\theta) = \frac{A-C}{B}\) determines rotation needed
Translated conic: A conic whose center is not at the origin, determined by non-zero D and E coefficients in the general form. The translation is handled by completing the square.
From \(x^2 - 4y^2 + 6x - 8y + 1 = 0\)
\(A = 1\), \(B = 0\), \(C = -4\)
Since A and C have opposite signs, this suggests a hyperbola
\(B^2 - 4AC = 0^2 - 4(1)(-4) = 0 + 16 = 16\)
Since \(16 > 0\), this confirms it's a hyperbola
Group x and y terms: \(x^2 + 6x - 4y^2 - 8y = -1\)
Factor coefficient of y²: \(x^2 + 6x - 4(y^2 + 2y) = -1\)
Complete square for x: Take coefficient of x: 6, divide by 2: 3, square: 9
Complete square for y: Take coefficient of y: 2, divide by 2: 1, square: 1
\(x^2 + 6x + 9 - 4(y^2 + 2y + 1) = -1 + 9 - 4(1)\)
\((x+3)^2 - 4(y+1)^2 = 4\)
Divide by 4: \(\frac{(x+3)^2}{4} - \frac{(y+1)^2}{1} = 1\)
Standard form: \(\frac{(x-h)^2}{a^2} - \frac{(y-k)^2}{b^2} = 1\) where \(h = -3\), \(k = -1\), \(a = 2\), \(b = 1\)
Center: \((-3, -1)\)
Since the x-term is positive, transverse axis is horizontal
Vertices: \((h \pm a, k) = (-3 \pm 2, -1) = (-1, -1)\) and \((-5, -1)\)
Focal distance: \(c = \sqrt{a^2 + b^2} = \sqrt{4 + 1} = \sqrt{5}\)
Foci: \((h \pm c, k) = (-3 \pm \sqrt{5}, -1)\)
Asymptotes: \(y - k = \pm\frac{b}{a}(x - h)\) → \(y + 1 = \pm\frac{1}{2}(x + 3)\)
This is a hyperbola with standard form \(\frac{(x+3)^2}{4} - \frac{(y+1)^2}{1} = 1\). Center: (-3, -1), Vertices: (-1, -1) and (-5, -1), Foci: \((-3 \pm \sqrt{5}, -1)\), Asymptotes: \(y = -1 \pm \frac{1}{2}(x + 3)\).
• Hyperbola Discriminant: \(B^2 - 4AC > 0\)
• Opposite Signs: If A and C have opposite signs, it's a hyperbola
• Focal Relationship: \(c^2 = a^2 + b^2\) for hyperbolas
General Conic Equation: The most general second-degree equation in two variables: \(Ax^2 + Bxy + Cy^2 + Dx + Ey + F = 0\).
Discriminant: The value \(B^2 - 4AC\) which determines the type of conic regardless of rotation.
Rotation: When \(B \neq 0\), the conic is rotated from its standard position.
Translation: When D or E are non-zero, the conic is shifted from the origin.
Standard Form: The simplest representation of a conic showing its key features directly.
- Identify coefficients: Extract A, B, C, D, E, F from general form
- Calculate discriminant: Use \(B^2 - 4AC\) to determine conic type
- Check for rotation: If B ≠ 0, conic is rotated
- Complete the square: To find center and convert to standard form
- Identify features: Based on standard form representation
• If \(B^2 - 4AC < 0\) and \(A = C\), \(B = 0\): Circle
• If \(B^2 - 4AC < 0\) and \(A \neq C\): Ellipse
• If \(B^2 - 4AC = 0\): Parabola
• If \(B^2 - 4AC > 0\): Hyperbola
Degenerate conics: Cases where the general equation represents no real points, a single point, or a pair of intersecting lines. For circles, if the radius squared is negative, it represents no real points.
From \(x^2 + y^2 - 4x + 6y + 13 = 0\)
\(A = 1\), \(B = 0\), \(C = 1\)
Since A = C and B = 0, this suggests a circle
\(B^2 - 4AC = 0^2 - 4(1)(1) = 0 - 4 = -4\)
Since \(-4 < 0\), this is an ellipse
Since A = C and B = 0, it's specifically a circle
Group x and y terms: \(x^2 - 4x + y^2 + 6y = -13\)
Complete square for x: Take coefficient of x: -4, divide by 2: -2, square: 4
Complete square for y: Take coefficient of y: 6, divide by 2: 3, square: 9
\(x^2 - 4x + 4 + y^2 + 6y + 9 = -13 + 4 + 9\)
\((x-2)^2 + (y+3)^2 = 0\)
Standard form: \((x-2)^2 + (y+3)^2 = 0\)
This represents a single point at (2, -3) since the radius squared is 0
This is a degenerate case of a circle
Since the equation simplifies to \((x-2)^2 + (y+3)^2 = 0\), this means both \((x-2)^2 = 0\) and \((y+3)^2 = 0\)
Therefore: \(x = 2\) and \(y = -3\)
This represents a single point: (2, -3)
This equation represents a degenerate conic: a single point at (2, -3). The equation can be written as \((x-2)^2 + (y+3)^2 = 0\), which only has one solution.
• Degenerate Cases: When radius squared is zero, represents a single point
• Circle Identification: A = C and B = 0 in general form
• Completing the Square: Essential for identifying degenerate cases
Complex rotation: When the rotation angle is not a standard angle (like 30°, 45°, 60°), the rotation analysis becomes more complex. The equation can still be classified using the discriminant.
From \(5x^2 - 6xy + 5y^2 - 8x + 8y - 8 = 0\)
\(A = 5\), \(B = -6\), \(C = 5\)
Since \(B \neq 0\), this conic is rotated from standard position
\(B^2 - 4AC = (-6)^2 - 4(5)(5) = 36 - 100 = -64\)
Since \(-64 < 0\), this is an ellipse
Using \(\cot(2\theta) = \frac{A-C}{B} = \frac{5-5}{-6} = \frac{0}{-6} = 0\)
Since \(\cot(2\theta) = 0\), we have \(2\theta = 90°\), so \(\theta = 45°\)
To eliminate the xy term, we need to rotate by 45°
Using rotation formulas: \(x = x'\cos\theta - y'\sin\theta\) and \(y = x'\sin\theta + y'\cos\theta\)
With \(\theta = 45°\): \(\cos\theta = \sin\theta = \frac{\sqrt{2}}{2}\)
Substituting: \(x = \frac{\sqrt{2}}{2}(x' - y')\) and \(y = \frac{\sqrt{2}}{2}(x' + y')\)
This would transform the original equation into one without an \(x'y'\) term
The resulting equation would be in standard form in the new coordinate system
However, the discriminant remains unchanged: still \(-64\), confirming it's an ellipse
While the equation can be converted to standard form through rotation, the process is complex
For classification purposes, the discriminant test is sufficient
The key features (type of conic) are preserved under rotation
This is an ellipse (discriminant = -64 < 0) rotated by 45° from standard position. While it can be converted to standard form through rotation, the process involves complex transformations. The conic can be identified without rotation using the discriminant.
• Rotation Invariance: Discriminant determines type regardless of rotation
• Rotation Angle: \(\cot(2\theta) = \frac{A-C}{B}\) determines required rotation
• Practical Analysis: Discriminant test is often sufficient for classification
General Conic Equation: The most general second-degree equation in two variables: \(Ax^2 + Bxy + Cy^2 + Dx + Ey + F = 0\).
Discriminant: The value \(B^2 - 4AC\) which determines the type of conic regardless of rotation or translation.
Rotation: When \(B \neq 0\), the conic is rotated from its standard position, requiring rotation of coordinate system to eliminate the \(xy\) term.
Translation: When \(D\) or \(E\) are non-zero, the conic is shifted from the origin, handled by completing the square.
Standard Form: The simplest representation of a conic showing its key features directly.
Degenerate Conics: Special cases including empty sets, single points, or pairs of lines.
- Identify coefficients: Extract A, B, C, D, E, F from the general form
- Calculate discriminant: Use \(B^2 - 4AC\) to determine conic type
- Check for rotation: If B ≠ 0, determine rotation angle
- Check for translation: If D or E are non-zero, find center through completing the square
- Look for degenerate cases: Check if equation represents empty set, point, or lines
- Convert to standard form: Complete the square or rotate coordinates as needed
- Identify features: Based on standard form representation
• If discriminant is negative and completing the square gives a negative radius squared: Empty set
• If discriminant is negative and completing the square gives zero radius squared: Single point
• If discriminant is zero and equation factors into linear terms: Two parallel lines or one repeated line
• If discriminant is positive and equation factors into linear terms: Two intersecting lines
Ellipses: \(B^2-4AC < 0\) (e.g., \(x^2+4y^2=4\))
Parabolas: \(B^2-4AC = 0\) (e.g., \(y=x^2\))
Hyperbolas: \(B^2-4AC > 0\) (e.g., \(x^2-y^2=1\))
Analysis: The chart shows how different discriminant values correspond to different conic types.
- Negative discriminant creates closed curves (ellipses/circles)
- Zero discriminant creates open curves (parabolas)
- Positive discriminant creates disconnected curves (hyperbolas)