General form of conics: \(Ax^2 + Bxy + Cy^2 + Dx + Ey + F = 0\). The discriminant \(B^2 - 4AC\) determines the type of conic: \(B^2 - 4AC < 0\) is an ellipse (or circle), \(B^2 - 4AC = 0\) is a parabola, \(B^2 - 4AC > 0\) is a hyperbola.
- Identify coefficients A, B, C from the general form
- Calculate discriminant \(B^2 - 4AC\)
- Determine conic type based on discriminant value
- Convert to standard form by completing the square
- Identify key features and sketch the graph
From \(x^2 + 4y^2 - 6x + 8y - 3 = 0\)
\(A = 1\), \(B = 0\), \(C = 4\)
Since \(B = 0\), there's no \(xy\) term
\(B^2 - 4AC = 0^2 - 4(1)(4) = 0 - 16 = -16\)
Since \(-16 < 0\), this is an ellipse
Group x and y terms: \(x^2 - 6x + 4y^2 + 8y = 3\)
Factor coefficient of y²: \(x^2 - 6x + 4(y^2 + 2y) = 3\)
Complete square for x: Take coefficient of x: -6, divide by 2: -3, square: 9
Complete square for y: Take coefficient of y: 2, divide by 2: 1, square: 1
\(x^2 - 6x + 9 + 4(y^2 + 2y + 1) = 3 + 9 + 4(1)\)
\((x-3)^2 + 4(y+1)^2 = 16\)
Divide by 16: \(\frac{(x-3)^2}{16} + \frac{(y+1)^2}{4} = 1\)
Center: \((3, -1)\), \(a^2 = 16 \Rightarrow a = 4\), \(b^2 = 4 \Rightarrow b = 2\)
Since \(a > b\), major axis is horizontal
This is an ellipse with standard form \(\frac{(x-3)^2}{16} + \frac{(y+1)^2}{4} = 1\). Center: (3, -1), major axis horizontal with semi-major axis a=4, semi-minor axis b=2.
• Discriminant Test: \(B^2 - 4AC\) determines conic type
• Completing the Square: Essential for converting to standard form
• Ellipse Properties: Major axis corresponds to larger denominator
Parabola: A conic where only one variable is squared. In the general form \(Ax^2 + Bxy + Cy^2 + Dx + Ey + F = 0\), if either A or C is zero (but not both), the conic is a parabola. The discriminant \(B^2 - 4AC = 0\).
From \(x^2 - 4x - 8y + 12 = 0\)
\(A = 1\), \(B = 0\), \(C = 0\)
Only the \(x\) variable is squared, confirming this is a parabola
\(B^2 - 4AC = 0^2 - 4(1)(0) = 0 - 0 = 0\)
Since \(0 = 0\), this confirms it's a parabola
\(x^2 - 4x - 8y + 12 = 0\)
\(8y = x^2 - 4x + 12\)
\(y = \frac{1}{8}x^2 - \frac{1}{2}x + \frac{3}{2}\)
Factor out coefficient of \(x^2\): \(y = \frac{1}{8}(x^2 - 4x) + \frac{3}{2}\)
Complete the square: Take coefficient of x: -4, divide by 2: -2, square: 4
\(y = \frac{1}{8}(x^2 - 4x + 4 - 4) + \frac{3}{2}\)
\(y = \frac{1}{8}((x-2)^2 - 4) + \frac{3}{2}\)
\(y = \frac{1}{8}(x-2)^2 - \frac{1}{2} + \frac{3}{2}\)
\(y = \frac{1}{8}(x-2)^2 + 1\)
Vertex form: \(y = a(x-h)^2 + k\) where \(a = \frac{1}{8}\), \(h = 2\), \(k = 1\)
Vertex: \((2, 1)\)
Since \(a > 0\), parabola opens upward
Parameter: \(p = \frac{1}{4a} = \frac{1}{4 \cdot \frac{1}{8}} = \frac{1}{\frac{1}{2}} = 2\)
Focus: \((h, k+p) = (2, 1+2) = (2, 3)\)
Directrix: \(y = k - p = 1 - 2 = -1\)
This is a parabola with vertex form \(y = \frac{1}{8}(x-2)^2 + 1\). Vertex: (2, 1), Focus: (2, 3), Directrix: \(y = -1\).
• Parabola Discriminant: \(B^2 - 4AC = 0\)
• Vertex Form: \(y = a(x-h)^2 + k\) gives vertex at \((h,k)\)
• Focus-Directrix Property: \(p = \frac{1}{4a}\) determines focal distance
Hyperbola: A conic where the \(x^2\) and \(y^2\) terms have opposite signs. In the general form \(Ax^2 + Bxy + Cy^2 + Dx + Ey + F = 0\), if \(A\) and \(C\) have opposite signs, the conic is a hyperbola. The discriminant \(B^2 - 4AC > 0\).
From \(9x^2 - 4y^2 + 18x - 16y - 43 = 0\)
\(A = 9\), \(B = 0\), \(C = -4\)
Since A and C have opposite signs, this suggests a hyperbola
\(B^2 - 4AC = 0^2 - 4(9)(-4) = 0 + 144 = 144\)
Since \(144 > 0\), this confirms it's a hyperbola
Group x and y terms: \(9x^2 + 18x - 4y^2 - 16y = 43\)
Factor coefficients: \(9(x^2 + 2x) - 4(y^2 + 4y) = 43\)
Complete square for x: Take coefficient of x: 2, divide by 2: 1, square: 1
Complete square for y: Take coefficient of y: 4, divide by 2: 2, square: 4
\(9(x^2 + 2x + 1) - 4(y^2 + 4y + 4) = 43 + 9(1) - 4(4)\)
\(9(x+1)^2 - 4(y+2)^2 = 43 + 9 - 16 = 36\)
Divide by 36: \(\frac{9(x+1)^2}{36} - \frac{4(y+2)^2}{36} = 1\)
\(\frac{(x+1)^2}{4} - \frac{(y+2)^2}{9} = 1\)
Standard form: \(\frac{(x-h)^2}{a^2} - \frac{(y-k)^2}{b^2} = 1\) where \(h = -1\), \(k = -2\), \(a = 2\), \(b = 3\)
Center: \((-1, -2)\)
Since the x-term is positive, transverse axis is horizontal
Vertices: \((h \pm a, k) = (-1 \pm 2, -2) = (1, -2)\) and \((-3, -2)\)
Focal distance: \(c = \sqrt{a^2 + b^2} = \sqrt{4 + 9} = \sqrt{13}\)
Foci: \((h \pm c, k) = (-1 \pm \sqrt{13}, -2)\)
This is a hyperbola with standard form \(\frac{(x+1)^2}{4} - \frac{(y+2)^2}{9} = 1\). Center: (-1, -2), Vertices: (1, -2) and (-3, -2), Foci: \((-1 \pm \sqrt{13}, -2)\).
• Hyperbola Discriminant: \(B^2 - 4AC > 0\)
• Opposite Signs: If A and C have opposite signs, it's a hyperbola
• Focal Relationship: \(c^2 = a^2 + b^2\) for hyperbolas
Conic Section: A curve obtained as the intersection of a cone with a plane. Includes circles, ellipses, parabolas, and hyperbolas.
Discriminant: The value \(B^2 - 4AC\) from the general form \(Ax^2 + Bxy + Cy^2 + Dx + Ey + F = 0\).
Standard Form: The simplest representation of a conic showing its key features directly.
Rotation: When \(B \neq 0\), the conic is rotated from its standard position.
- Identify coefficients: Extract A, B, C from general form
- Calculate discriminant: Use \(B^2 - 4AC\) to determine conic type
- Check special cases: If A=C and B=0, it might be a circle
- Convert to standard form: Complete the square to identify key features
- Verify and sketch: Confirm identification and plot key characteristics
• If \(B^2 - 4AC < 0\) and \(A = C\), \(B = 0\): Circle
• If \(B^2 - 4AC < 0\) and \(A \neq C\): Ellipse
• If \(B^2 - 4AC = 0\): Parabola
• If \(B^2 - 4AC > 0\): Hyperbola
Degenerate conics: Cases where the general equation represents no real points, a single point, or a pair of intersecting lines. For circles, if the radius squared is negative, it represents no real points.
From \(x^2 + y^2 - 4x + 6y + 13 = 0\)
\(A = 1\), \(B = 0\), \(C = 1\)
Since A = C and B = 0, this suggests a circle
\(B^2 - 4AC = 0^2 - 4(1)(1) = 0 - 4 = -4\)
Since \(-4 < 0\), this is an ellipse
Since A = C and B = 0, it's specifically a circle
Group x and y terms: \(x^2 - 4x + y^2 + 6y = -13\)
Complete square for x: Take coefficient of x: -4, divide by 2: -2, square: 4
Complete square for y: Take coefficient of y: 6, divide by 2: 3, square: 9
\(x^2 - 4x + 4 + y^2 + 6y + 9 = -13 + 4 + 9\)
\((x-2)^2 + (y+3)^2 = 0\)
Standard form: \((x-2)^2 + (y+3)^2 = 0\)
This represents a single point at (2, -3) since the radius squared is 0
This is a degenerate case of a circle
Since the equation simplifies to \((x-2)^2 + (y+3)^2 = 0\), this means both \((x-2)^2 = 0\) and \((y+3)^2 = 0\)
Therefore: \(x = 2\) and \(y = -3\)
This represents a single point: (2, -3)
This equation represents a degenerate conic: a single point at (2, -3). The equation can be written as \((x-2)^2 + (y+3)^2 = 0\), which only has one solution.
• Degenerate Cases: When radius squared is zero, represents a single point
• Circle Identification: A = C and B = 0 in general form
• Completing the Square: Essential for identifying degenerate cases
Rotated conic: A conic section that has been rotated from its standard position, resulting in an \(xy\) term in the equation. The discriminant \(B^2 - 4AC\) still determines the type regardless of rotation.
From \(x^2 + 4xy + y^2 - 2x + 6y - 3 = 0\)
\(A = 1\), \(B = 4\), \(C = 1\)
Since \(B \neq 0\), this conic is rotated from standard position
\(B^2 - 4AC = 4^2 - 4(1)(1) = 16 - 4 = 12\)
Since \(12 > 0\), this is a hyperbola
Even though the conic is rotated, the discriminant still correctly identifies the type
The \(xy\) term indicates the axes of the hyperbola are not aligned with the coordinate axes
This hyperbola has its transverse and conjugate axes at an angle to the x and y axes
To fully analyze this conic, one would typically rotate the coordinate system to eliminate the \(xy\) term
The rotation angle \(\theta\) can be found using \(\tan(2\theta) = \frac{B}{A-C}\)
For rotated conics, the discriminant test is the most reliable identification method
Completing the square becomes more complex due to the \(xy\) term
Advanced techniques like eigenvalue decomposition are needed for complete analysis
This is a hyperbola (discriminant = 12 > 0) that is rotated from its standard position due to the presence of the \(xy\) term. The axes of the hyperbola are not aligned with the coordinate axes.
• Rotation Invariance: Discriminant \(B^2 - 4AC\) determines type regardless of rotation
• Rotated Conics: \(B \neq 0\) indicates rotation from standard position
• Advanced Analysis: Requires rotation of coordinate system to eliminate \(xy\) term
Conic Section: A curve obtained as the intersection of a cone with a plane. Includes circles, ellipses, parabolas, and hyperbolas.
Discriminant: The value \(B^2 - 4AC\) from the general form \(Ax^2 + Bxy + Cy^2 + Dx + Ey + F = 0\). Determines the type of conic regardless of rotation.
Standard Form: The simplest representation of a conic showing its key features directly.
Rotation: When \(B \neq 0\), the conic is rotated from its standard position.
Translation: When \(D\) or \(E\) are non-zero, the conic is shifted from the origin.
Degenerate Conics: Special cases including empty sets, single points, or pairs of lines.
- Identify coefficients: Extract A, B, C from the general form
- Calculate discriminant: Use \(B^2 - 4AC\) to determine conic type
- Check special cases: If A=C and B=0, verify if it's a circle
- Look for degenerate cases: Check if equation represents empty set, point, or lines
- Convert to standard form: Complete the square to identify key features
- Verify and sketch: Confirm identification and plot key characteristics
• If discriminant is negative and completing the square gives a negative radius squared: Empty set
• If discriminant is negative and completing the square gives zero radius squared: Single point
• If discriminant is zero and equation factors into linear terms: Two parallel lines or one repeated line
• If discriminant is positive and equation factors into linear terms: Two intersecting lines
Ellipses: \(B^2-4AC < 0\) (e.g., \(x^2+4y^2=4\))
Parabolas: \(B^2-4AC = 0\) (e.g., \(y=x^2\))
Hyperbolas: \(B^2-4AC > 0\) (e.g., \(x^2-y^2=1\))
Analysis: The chart shows how different discriminant values correspond to different conic types.
- Negative discriminant creates closed curves (ellipses/circles)
- Zero discriminant creates open curves (parabolas)
- Positive discriminant creates disconnected curves (hyperbolas)